Photostream quit working on PC

Running the iCloud Control Panel on a Win7-64 PC. Had the sync folder set up, and all photos from my iPhone 5 appeared beautifully in the PC folder, just as they were supposed to.
I got an iPhone 6 a couple of months ago, and it seemed to sync just fine for a while. Then pics I would take with the iPhone would not show up, either for a day or two, or not at all.
Now, NONE of the photos I take with the iPhone are showing up on the PC, although they are showing up on my iPad just fine.
I have double checked and triple checked the iCloud control panel settings, and they seem fine.
Can someone please tell me how to make my photos sync again? How can I make them appear on my PC like they used to?
Thanks so much if you can.

same here, it worked a bit in the beginning, and now not at all anymore, it's a disaster. Not mentioning that iCloud control panel freezes, in the sense that it becomes unlaunchable from the tray icon after a while spent in a Windows session, not to mention that photostream is deactivated each time I login to Windows, I already started another thread about this. Don't know what's the culprit, the panel or the servers, must be a mixture of both.

Similar Messages

TS3989 my photostream quit working, how do I get it working again

My photostream quit working. The pictures are on my iphone 4s but don't go to my PC? Apple won't help unless I pay them money, which I don't have at this time because I lost my job. Going to forums I see that many people have this same problem.

Welcome to the Apple Community.
Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

Photostream quit working

photostream has quit working altogether. maybe after the OS update
How do i reset it.

Save any existing photo stream photos to your camera roll (or you will lose photos older than 30 days), then turn off photo stream on your device and turn it back on.

My photostream stopped working

My photostream just stopped working! Anyone have a fix or know why?

I am having the same friggin' problem. Worked fine for a while, but quit updating either way. tried all the suggestions in all the different photostream not working posts I could find, and it's still not working. tried resetting photostream, deleting and reinstalling iCloud, nothing. Tried toggling everything off and then back on - nothing. Checked settings on iCloud Control Panel - nothing. I'm connected to wi-fi which is right here on my desk - nothing. Nothing. Nothing. Nothing.

27: iMac Apple Mini DisplayPort to DVI adapter quits working post-firmware

I iMac Apple Mini DisplayPort to DVI adapter suddenly quit working after I installed Apple's latest iMac display firmware update. This is an Intel Core i5; the monitor is an LG Flatron 24" Wide, and when it powers up it says "no video input" and goes into power-saving mode. No amount of replugging cables helps, but the monitor works fine on other computers.
The Displays control panel just shows one monitor, and clicking Detect Displays does nothing.
I suspect Apple's Display Firmware Update. My installer log shows the following, but the problem only happened today after the latest update:
6/1/10 9:45 AM 27-inch iMac EFI Firmware Update 1.0
6/1/10 9:45 AM 27-inch iMac Display Update 1.0
6/4/10 11:47 AM 27-inch iMac SMC Firmware Update 1.0
6/4/10 11:47 AM 27-inch iMac Display Update 1.0
6/5/10 7:29 AM 27-inch iMac Display Update 1.0
I have automatic updates disabled, but after each update I would see more firmware updates ready, but caution leads me to never install more than one of these at a time, and then to wait a while to see if anything bad happens. The odd thing is that the Display Update 1.0 seems to have been installed three times in this course of events. Alas, there appears to be no way to uninstall a firmware update.
Here is the System Profiler Graphics/Displays output:
Chipset Model: ATI Radeon HD 4850
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x944a
Revision ID: 0x0000
ROM Revision: 113-B9110C-425
EFI Driver Version: 01.00.383
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
Display Connector:
Status: No Display Connected
It says the Mac sees no display connected, and the display gets no video signal. Since the adapter is an active device (it has powered electronics to convert DisplayPort signals to DVI signals) I suppose it could have just coincidentally died. But that seems unlikely given that the thing worked perfectly just before the last firmware update.
Does anybody have similar experience, or better yet, a fix?

Unfortunately the Apple Knowledge Base does not give much information about this update. Such has how to tell if it has been successfully installed. I suspect that because it keeps recurring in the install log that it has not been installed successfully as yet. Are you receiving this update through Software Update? Can you locate the installer for this update? It maybe located in Apps/Utilities.
Some firmware update installations can be interrupted/corrupted by attached devices. If you find the update's installer on your iMac, I suggest that you detach all external devices from the iMac, use an Apple USB keyboard & mouse if available, follow the instructions carefully and install the update manually. If you do not locate the installer I suggest downloading manually from the link below and installing it.
The Knowledge Base article mentions that your iMac should also have a Graphics Firmware Update. I suggest that you download and install that as well.
27-inch iMac Display Firmware Update 1.0
http://support.apple.com/kb/DL998
27-inch iMac Graphics Firmware Update 1.0
http://support.apple.com/kb/DL984
Dah•veed

Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration?

Email from within iPhoto '08 (7.1.1) quit working

I am running Leopard (10.5.1) and iPhoto '08 (7.1.1) on a 2.4ghz 17" MBP. Whenever I try to email a photo from within iPhoto it pops up a window to let me choose size & options, I hit the Compose button, it will then popup a window saying that it is Preparing photos for email... then that window just goes away and it never creates the new email. I see this same behavior regardless of whether or not Mail is already open and regardless of what photo I am trying to email. This was working fine in the past... believe that it quit working after the upgrade to 10.5.1 (but not absolutely positive of that)... Any troubleshooting ideas would be greatly appreciated as I use this feature quite often.
Cheers!
Kirk

Kirk:
Try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. Next, if needed, download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

My Bluetooth USB wireless transmitter for my portable speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. Can anybody help?

My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?

Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out.

Every time I open Firefox or open a page in a new tab, I get the error message that a script on this page is not responding or has quit working. This has only happened since I upgraded to 5.0.

Even when I start firefox I have to sit here and wait for it to tell me a script on this page is not responding or has quit working. Once that happens which takes a while, I can say stop script and it moves on. I've always liked using firefox and have never had a problem in the past, however if I can't get this particular problem fixed, and I've tried many ways to do this, I may have to change to another browser. I would hope that you could find out why this is happening to me before I make that decision. One other thing, I am using the dreaded Vista OS.

Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Have been using firefox for months; now has quit working properly with the websites I use everyday. What happened?

It has quit working with "liverez" which is my web based reservation program. The place I login is https://reservations.liverez.com/login.asp?LogOff=True&Return=Res but once I login, the site does not work as it did before. The website that corresponds with this doesn't look right now either. I can't even use my msn email account with firefox now. I have had to go back to using internet explorer. I have not even tried other sites with foxfire at this time. The other sites I use for work. Things that aren't working are that I can't click on things I need to click on, drop downs aren't showing up, pictures are absent, etc. It is all working fine on internet explorer and used to work on firefox until last night.

Thanks to some hints in several strings, I went back to the Control Panel in XP, clicked on Sounds and Devices, clicked on Audio, then changed the default device to the Realtek HD Audio output I have on my computer. Now I can hear You Tube video sound and other Internet audio fine, at least for now. I will come back if it stops again. Thanks to all who posted.

Since moving to OS 10.7.3 one of my animations quit working in Safari

Since moving to OS 10.7.3 one of my animations quit working correctly in Safari 5.1.7 (it works correctly in all other browsers on Mac and PC). I restarted the computer to make sure that wasn't a problem. Other animations on the site are working correctly.
Here is the page:
http://www.loriswebs.com/menu_samples.html
It's the "menu item indented on mousover animation." It's not supposed indent only one line of text.
You'll have to view it in another browser to see how it's supposed to work.
Anyone know what could be causing this?

Firstly, apologies for the delayed response! Secondly, thanks for the advice!
I have created another user and both browsers are perfectly fine and instantly responsive.
My security settings are on WPA/WPA2-Personal(PSK).
Any suggestions what in my main user causes the problem?

Two finger scrolling quit working on Windows 7 Boot Camp.

My two finger scrolling just quit working while running Windows 7 on Boot Camp. Any ideas?

Mr Tech,
I did insert my Mac OS X Snow Leopard DVD once I was in Windows 7 and installed the boot camp thing, which installed all of the drivers

When I installe Firefox version 4 my finger print scanner quit working. Any fixes for this?

I downloaded and installed Fire Fox 4.0 a few weeks ago. As soon as I downloaded the new software, my finger print scanner quit working. The scanner light that normally appears when ever there is a request for entering a user name or password no longer turned on and the scanner was no longer functional. I removed the new Fire Fox version and re-installed version 3.6.17. My finger print scanner is now working again.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

USB hubs quit working with 10.7.2

I have a Mac Pro, dual quad-core 2.8GHz Xeon, 10GB ram. Three D-link DUB-H7 usb hubs. After the update to 10.7.2 and iTunes 5.0.1 (not sure exaclty when), my usb devices & hubs quit working properly. For a while they would work occasionally.
I have a USB keyboard which works if it's plugged in directly when the computer boots. But other devices (external drives, flash card reader, iPod dock, USB display) don't work at all. I tested the hubs with another Lion system, and they work on that. iTunes wireless sync quit as well.
I've tried resetting PRAM and SMC. Neither fixed the problem. Tried repairing permissions. No change. Rebooting (many times).
Could it be a USB driver conflict? I removed VirtualBox usb drivers, as well as Parallels, but not vmware, which I also own.
When I plug in a device, I get 'trouble enumerating' and then "The IOUSBFamily was not able to enumerate a device." in the system.log
Any ideas? Is my motherboard dying? If so, why does the keyboard still work, and nothing else?

Followup info. I reset the PRAM and booted into 10.5.1, on another drive.
This time, similar behavior; HID devices (keyboard, mouse, bluetooth) work fine. Hubs (which work fine on another Lion computer!) generate a bunch of console errors:
11/19/11 11:21:31 AM kernel USBF: 746.706 USB Device IOUSBHubDevice is violating Section 9.3.5 of the USB Specification -- Error in GetConfigDescriptor( wLength = 4)
11/19/11 11:21:31 AM kernel USBF: 746.707 AppleUSBHub[0xf536000]::ConfigureHub No config descriptor
11/19/11 11:21:31 AM kernel USBF: 746.707 AppleUSBHub[0xf536000]::start Aborting startup: error 0xe0004056
11/19/11 11:21:31 AM kernel USBF: 746.707 IOUSBHubPolicyMaker[0xf536000]::start - ConfigureHubDriver returned false

HT4890 Shared photoStream not working for public share

Shared photoStream not working for public share and keep showing the same url for the first shared stream i have published. this means everytime i try to share to anyone else not using an iphone it comes up with page not found. I have also notice the in first initial public url which was given is the same url keeps showing up everytime i try to make it public. how do i reset or change that url so other public share stream will work. how do i get this to work

I've read some posts from users with a similar problem who were able to fix this by changing the download folder (or just click Change next to Download Folder, then click cancel). Not sure if this will work for you but thought I would pass it along.

Photostream quit working on PC

Similar Messages

Maybe you are looking for