PhotoStream will not enable.
PhotoStream will not enable. When I check the box it unchecks itself imediately. Just downloaded the newest version of Lion. Using a MacBook Pro. Have checked off PhotoStream in System Preferences. What am I missing?
And again
Do you have iPhoto 11 (v9.3) or later? Or Aperture 3.3 or layer?
The exact version is critical to being able to help you.
LN
Similar Messages
-
As of recently any photos I add to a shared photostream will not update for others and I don't see the updated photos on my other devices. Only I can see them from the device that i've posted from. How come others sharing this photostream are no longer getting the new photos? My iphone (the device i'm adding from) shows 20 pictures in this shared photostream and yet 4 other people that I share this photostream album with and my ipad only show 12 photos. For the past week I keep adding photos thinking people will see them but it just won't update the new ones. Any ideas how to fix this?
You can stop new photos being automatically added to Photostream in iPhoto from iPhoto preferences > Photostream.
-
SF300 LAG port doesn't work, LACP will not enable.
I'm trying to configure something that seems pretty trivial.
I need 2-3 ports to participate in a LAG port. First off, I get the "Port X belongs to a vlan" if the participating port is something other than access vlan 1. This is totally useless. I need these ports to be dot1Q tunnels. This happens even If i set the default vlan to 300, (300 is my native or PVID). Another piece that doesn't seem to work is that LACP will not enable, even if I throw in the towel and make my ports access vlan 1. What gives? I've tried this on the only firmware available which has no patches avail yet. I've tried this on 2x 24ports, and on 2x 48 ports.. all the same issue.Hi I just gave it a try you can see my screen captures below.
If you are having trouble, have a word to the good folk at the SBSC if the switch is still under phone support coverage.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Maybe play it safe and delete your settings and start again... Here are some screen shots from my attempt.
I have to admit I enabled LAG and LACP before I created vlan 100.
you can see i have the same software as you.
add the ports and enable LACP at the same time.
ports 47 and 48 are still excluded from my Tagged Vlan
Now I selected port drop down for VLAN100 and selected LAG.
I then received and then modified the following screen capture.
Note I manually added LAG interface 1 as a tagged member of VLAN 100.
Why Lag interface 1, because I created LAG 1 previously, as seen in a previous screen shot above.
regards Dave -
IMAP will not enable in mail server, using Panther 10.3.9 server
Even though I do not plan on using POP it will not enable either. SMTP
is enabled for both out going and incoming.
postconf -n
always_bcc = [email protected]
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay = postmaster
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 10240000
mydestination = $myhostname,localhost.$mydomain,70.88.14.125,fieldshop.com
mydomain_fallback = localhost
myhostname = server.fieldshop.com
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions =
smtpdenforcetls = no
smtpdpw_server_securityoptions = gssapi,cram-md5,login,plain
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/postfix/server.pem
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = yes
unknownlocal_recipient_rejectcode = 450
server:~ fieldshop$
also the mail log shows the following
Jan 21 00:20:14 server master[6691]: empty option value on line 20 of configuration file
Jan 21 00:20:14 server master[6691]: exiting
PowerBook Mac OS X (10.4.4)Here are the contents
cat /etc/imapd.conf
admins: cyrus
configdirectory: /var/imap
partition-default: /var/spool/imap
unixhierarchysep: yes
altnamespace: yes
servername: server.fieldshop.com
sendmail: /usr/sbin/sendmail
mboxlist_db: berkeley
seenstate_db: flat
logrollingdays: 0
logrolling_daysenabled: false
tlscertfile: /var/imap/server.pem
tlscafile: /var/imap/server.pem
tlsserveroptions: use
imapauthlogin: yes
imapauth_crammd5: yes
tlskeyfile: /var/imap/server.pem
imapauthplain: yes
imapauthgssapi: yes
tlsca_filecontent:
quotawarn_frequencydays: 0
tlscommonname:
lmtpluser_relayenabled: false
lmtpluserrelay: postmaster
enable_pop: no
server:~ fieldshop$
PowerBook Mac OS X (10.4.4) -
Iphoto will not enable photo stream
My iPhoto will not enable Photo Stream. All software is up to date and I have the latest version of iPhoto, in fact Photo Stream was working last week on my Mac. Now all I get is the msg "iPhoto cannot enable Photo Stream". Any thoughts ??
Hey dave2468, as you can tell by my original post, this problem surfaced several months ago and out of frustration for lack of an answer to the problem - I called Apple for support. I was fully prepared to spend the $50 bucks to resolve this issue but fortunately didn't have to. My problem did get resolved after about 1 &1/2 hours on the phone and the solution revolved around resetting my password for my account...can't tell you why other than ghost in the machine issue. Yours may be different issue but wanted to let you know how this ultimately got resolved. I have had no further issues relative to this problem since my phone consultation. Best of luck - I know how frustrating these things can be. B.
-
The sound on my hp stream notebook pc 14 will not enable.
the sound will not enable. i have tried downloading things to scan and fix the sound card...but they all cost money and i dont even know if it will fix the problem. it will not load the trouble shooting page either so i dont know what else to do. it has blocked all spund on my pc and nothing i try to do will fix it as i have to pay large amounts of money before any programes will fix the problem
@lauralawrence93 ,
Hello and welcome to the HP support forums. Lets see what we can do about your sound issue.
First think if possible could you post back with your systems Product Number.
Until then here are some links you can check out to see if they help.
No Sound from Speakers (Windows 8)
Here is one set of threads from the support forums.
Troubleshooting Guide: Audio does not Work after a Certain Period of Time
Thank you again for posting. Hope to hear back from you soon.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
HP 6700 printer will not enable web services.
My HP 6700 printer will not enable web services. I've already downloaded the firmware update, manually entered the IP and DNS numbers... shutdown the printer and turned it back on.But when i try to enable web services it try's for a while then says web services could not be enabled.. any help would be appreciated. I have vista.
This question was solved.
View Solution.Hi there, two other things you could try (if not already attempted) are:
Check to ensure that you have the latest firmware for your router – review your router documentation/help (or the router manufacturer’s web site) for information on how to check for and install firmware updates.
Restore factory defaults - The factory default option is usually found in the Setup>Tools menu on your printer. Do the following on your device:
Remove/Disable Web Services
Restore factory defaults/settings (depending on the printer this is found under the Setup>Tools menu, or the Setup>Web Services menus, but varies by printer)
If prompted, re-do initial setup of your device and add it to your network
Re-enable Web Services
Once the Web Services information sheet is printed, use the printer claiming code to add your printer to your account on ePrintCenter
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee. -
I am running a 2106 controller with 1242 AP,
Had them on a POE injector on the same switch worked fine, mounted them in the ceiling now the radio will not enable."error in enabling admin status". any ideas?Hi Paul,
I think you might be running into this issue because the 1242 AP supports the Intelligent Power Management feature (which I didn't even know existed until recently). Have a look at the following.
Power Issue with the AP
When an AP uses a power injector as the power source, in some cases, the AP displays this error message:
CDP_PD-2-POWER_LOW: All radios disabled - LOW_POWER_CLASSIC inline
This message indicates that the AP is in low-power mode with all radios disabled and detects a Cisco switch that is unable to supply sufficient power to the AP. Even though the power injector, which can provide sufficient power, is connected with the AP, the AP still displays a LOW POWER error message and disables the radios. Therefore, the AP remains in low-power mode.
One possible reason for this issue might be that the AP supports the Intelligent Power Management feature. The Intelligent Power Management feature uses Cisco Discovery Protocol (CDP) to allow powered devices, such as an AP, to negotiate with a Cisco switch for sufficient power. The AP supports the Intelligent Power Management feature. As a result of the power negotiations, the AP either enters full-power mode or remains in low-power mode with the radios disabled.
In this case, the AP might be connected to a switch which cannot provide the necessary power to the AP. Therefore, even though the power injector is connected to the AP that uses this Intelligent Power management feature, it gives priority to the CDP information to identify whether or not the switch can provide the power. Once the AP knows, via CDP message, that the switch does not provide sufficient power, it disables the radios and remains in low-power mode.
The workaround to this issue is to tell the AP to ignore the CDP information for power. You can perform this by telnetting into the APs. Issue these commands to enable the APs to use the power injector:
power inline negotiation prestandard source
power inline negotiation injector H.H.H
The power inline negotiation command configures the Cisco Aironet 1130AG or 1240AG Series AP to operate with a later version of switch software that does not support Cisco Intelligent Power Management power negotiations.
The prestandard source portion of the command specifies that the Cisco switch runs a later version of software that does not support Intelligent Power Management negotiations, but is able to supply sufficient power to the AP.
The injector H.H.H portion of the command specifies that a power injector supplies power to the AP, and that the AP connects to a new switch port with the indicated MAC address (H.H.H). Enter the MAC address (in xxxx.xxxx.xxxx hexadecimal format) of the new switch port where the power injector is connected.
Note: This command should only be used when you move an AP and power injector to a different switch port.
From this good doc;
http://www.cisco.com/en/US/products/hw/wireless/ps441/products_tech_note09186a00800a86d7.shtml#new3
Hope this helps!
Rob -
Bluetooth will not enable(6230i)
Hello
I have a new 6230i and when I go to the Bluetooth menu and select
Bluetooth->On
it goes back to the Bluetooth menu with bluetooth set to 'Off'.
If I turn off the phone and turn back on and try it again, Bluetooth->On, I get the message:
"Switching on Bluetooth"
but it goes back to the Bluetooth menu with bluetooth set to 'Off'.
I have tried the same with a 6230 and Bluetooth switches on everytime.
Does it sound like my new 6230i is broke? Any ideas?
Are there any firmware upgrades which could fix this?No didnt drop the phone but if it was damaged by a drop i would have expected something else to be damaged. I have used the USB cable, IrDA, camera and normal phone operation and they seem to be ok, just the bluetooth will not enable. This leads me to think it is a problem from the factory.
First thing i tried was taking out the battery as you suggested. I will return to the store and see what they think but is there a Nokia tech support? -
Wifi ac dongle 900 will not enable.
Hi
I am having problems getting my dongle 900 to work.I have the correct drivers installed from hardware and also tried from the BT website online,but it says they maybe fautly.I have also installed the windows update.The item appears in my adapter list as disabled but when I click enable a small window pops ups saying "enabling" then "enabled" but it still tells me it's disabled and will not connect.Also when I diagnose the problem it says"windows could not automatically bind the IP protocol stack to the network adapter".This is the second dongle I have tried same result with both,any help would be helpful as the help desk is no help.
Thanks
Solved!
Go to Solution.I also ran into this issue, as the original poster never included the solution here's how to fix it:
Click the Start Orb and Right click on COMPUTER then click MANAGE
Go down to SERVICES AND APPLICATIONS then choose SERVICES
In the list that appears scroll down until you see something called "WLAN AutoConfig"
Right click and choose PROPERTIES
In the drop down box next to where it says STARTUP TYPE choose AUTOMATIC and hit APPLY
Once that's done you'll see four buttons under SERVICE STATUS you want to choose START
Hit APPLY and close all windows, your dongle is now enabled
Now you should be able to go back to your network connections and connect to your BT Hub wirelessly. -
Linksys AE1200 will not enable.
I purchased an AE1200 adapter brand new today, installed drivers (which I have uninstalled and reinstalled several times) and the system appears to recognize the adapter. What it will not do is allow me to Enable the adapter. I'll recap my steps so far: 1) Installed drivers from both disc and website (seperately)2) Uninstalled and reinstalled drivers.3) Uninstalled antivirus/firewall program in case of blocking.4) Scanned for hardware changes and disabled/enabled all other networking adapters.5) Tried adapter in both USB 2.0 and USB 3.0 ports on front and back of my tower. Anyone have a suggestion for further steps I can try to get this thing working?
Check if WZC is disabled. If it is, set it to automatic.
1. Click start, type “services.msc” in the start search box and press enter.
2. In services windows scroll down to locate “WLAN AutoConfig”.
3. If the startup type is not automatic, right click the service and change the startup type to “Automatic”.
4. Click Apply.
BTW, is this the first adapter you've installed on this computer? Try to install the adapter on another computer to know if it is defective.
You may also try to disable the LAN and try to enable WLAN again. -
I cannot get Dictation to start. Have tried to double click Fn key. In System Preferences/Dictation, Enable is set to Off but its greyed out so I cannot select On. The microphone however is working and shows that it hears me when I speak.
Any help is greatly appreciated.I suggest going into the multi-tasking bar and closing the Notes app. You can also try a reset on the phone. This will not affect data. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check to see if dictation works on the Notes app.
-
My iPhone 5 will not enable sync over wifi. Any help?
My iPhone 5 will not sync over wifi even after I have enabled it to do so in itunes. Any ideas?
Yes I have turned imessage off a number of times and that does not seem to he doing the trick, and it is not delivering them then I have to press on the photo and either chose try again or send as text message, I have had the setting on to not allow sending pictures as texts (so they can only send as imessage) since I got my phone in January and it has always worked until now, I have turned that off to allow me to send them as picture messages now but it's still not working over iMessage, I have also tried it using 3G and not wifi
-
Photostream will not sync with ipad
My new ipad will not sync with any of my current photos, any pictures that i already have or have taken with my iphone will not download, but they will download to my pc but will not download to ipad. Also any photos taken with the ipad will not upload on photostream. Everything is connected with the same profile, and are all on wifi. Tried turning off photostream and turning back on but no results and turning the ipad on and off, did nothing too.
Need Help.I had the same problem, but after looking in other discussions concluded that when the level of the iPad-battery is less then 20% fotostream does not work!!!
-
1130AG Radio will not enable.
Hey folks,
Something happend over the weekend at a remote site with my 1130AG WAP. The ethernet is up but the Radio will not come up. Here are some logs, etc:
000010: *Jun 14 10:46:43.010 CDT: %SSH-5-ENABLED: SSH 1.99 has been enabled
000011: *Jun 14 10:46:43.013 CDT: Writing radio coredump to 'flash:/r0.rcore'
000012: *Jun 14 10:46:43.811 CDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
000013: *Jun 14 10:46:44.210 CDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
000014: *Jun 14 10:46:51.388 CDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
000015: Jun 14 10:48:25.109 CDT: Writing radio coredump to 'flash:/r0.rcore'
000016: Jun 14 10:48:26.306 CDT: Interface Dot11Radio0: not starting because stop-on-failure set
000017: Jun 14 10:48:31.081 CDT: %PKI-6-AUTOSAVE: Running configuration saved to NVRAM
000018: Jun 14 10:49:15.904 CDT: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source
000019: Jun 14 10:49:15.904 CDT: Interface Dot11Radio0: not starting because stop-on-failure set
Just so not to rabbit trail, line item 18 above is because I am using a POE injector (non Cisco) which IS 802.3af compliant. (http://www.engeniustech.com/resources/NPE-4818_PoE.pdf). It's cheaper than purchasing a POE switch (Cisco or otherwise) for only one POE device in this remote office of two users. ($21)
Hereis the #show interfaces Dot11Radio0
Dot11Radio0 is initializing, line protocol is down
Hardware is 802.11G Radio, address is 0000.0000.0000 (bia 0000.0000.0000)
MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/1127/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/30 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
I see the Stop-On-Failure log line 19, but not having much luck determining how to trouble-shoot this.
The unit connects back to a 3com switch (after going through the POE Injector).
TAC tells me the warranty ran out last month (May), and I could either do one-time suppport @ $400/hr, or probably better off purchasing a new one.
Before I purchase a new one, what might I be missing that could resolve this?
Thanks,
JamesWell, thanks for all the assistance. The answers were correct so far. I have awarded
points for them. The problem still seems to persist. Here is the latest log files:
000010: *Feb 28 19:00:23.250 EST: %SNMP-5-COLDSTART: SNMP agent on host ATL-AP-01 is undergoing a cold start
000011: *Jun 15 08:33:26.008 CDT: %SSH-5-ENABLED: SSH 1.99 has been enabled
000012: *Jun 15 08:33:26.504 CDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
000013: *Jun 15 08:33:26.747 CDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
000014: *Jun 15 08:33:26.837 CDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
000015: *Jun 15 08:33:28.714 CDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
000016: Jun 15 08:36:11.745 CDT: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source
000017: Jun 15 08:36:32.830 CDT: %DOT11-2-RESET_RADIO: Restarting Radio interface Dot11Radio0 due to won't start
000018: Jun 15 08:36:34.825 CDT: %SYS-3-CPUHOG: Task is running for (1995)msecs, more than (2000)msecs (0/0),process = Dot11 driver.
-Traceback= 0x2E6F68 0x2E2158 0x4F7BEC 0x7D2070 0x7D4D8C 0x5034E0 0x50CA74 0x1A3B30
000019: Jun 15 08:36:36.820 CDT: %SYS-3-CPUHOG: Task is running for (3990)msecs, more than (2000)msecs (0/0),process = Dot11 driver.
-Traceback= 0x2EB6E8 0x2E6F6C 0x2E2158 0x4F7C08 0x7D2070 0x7D4D8C 0x5034E0 0x50CA74 0x1A3B30
000020: Jun 15 08:36:38.816 CDT: %SYS-3-CPUHOG: Task is running for (5985)msecs, more than (2000)msecs (0/0),process = Dot11 driver.
-Traceback= 0x2E6FA8 0x2E6F7C 0x4F7C08 0x7D2070 0x7D4D8C 0x5034E0 0x50CA74 0x1A3B30
000021: Jun 15 08:36:39.815 CDT: %SYS-3-CPUYLD: Task ran for (6984)msecs, more than (2000)msecs (0/0),process = Dot11 driver
000022: Jun 15 08:43:20.284 CDT: %SYS-5-CONFIG_I: Configured from http by admin on 172.16.1.205
000023: Jun 15 08:43:20.474 CDT: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
000024: Jun 15 08:43:45.135 CDT: %DOT11-2-RESET_RADIO: Restarting Radio interface Dot11Radio0 due to won't start
000025: Jun 15 08:43:47.129 CDT: %SYS-3-CPUHOG: Task is running for (1994)msecs, more than (2000)msecs (0/0),process = Dot11 driver.
-Traceback= 0x2E6F68 0x2E2158 0x4F7BEC 0x7D2070 0x7D4D8C 0x5034E0 0x50CA74 0x1A3B30
000026: Jun 15 08:43:49.124 CDT: %SYS-3-CPUHOG: Task is running for (3989)msecs, more than (2000)msecs (0/0),process = Dot11 driver.
-Traceback= 0x2EB6E8 0x2E6F6C 0x2E2158 0x4F7C08 0x7D2070 0x7D4D8C 0x5034E0 0x50CA74 0x1A3B30
000027: Jun 15 08:43:51.120 CDT: %SYS-3-CPUHOG: Task is running for (5985)msecs, more than (2000)msecs (0/0),process = Dot11 driver.
-Traceback= 0x2E6F68 0x2E2158 0x4F7C08 0x7D2070 0x7D4D8C 0x5034E0 0x50CA74 0x1A3B30
000028: Jun 15 08:43:52.120 CDT: %SYS-3-CPUYLD: Task ran for (6984)msecs, more than (2000)msecs (0/0),process = Dot11 driver
Any other ideas or, the radio probably dead?
THanks,
James
Maybe you are looking for
-
How can I reference more than one jar file
hi, In an applet, I use Archive = "foo.jar" to reference this jar file. But how can I reference more than one file? Thanks.
-
We are getting ready to move from Office 2010 MSI to Office 365 (2013) click to run ProPlus. Everything is ready to uninstall and install the new product. My question is if the Updates Enabled="TRUE" is not in the configuration.xml file will machin
-
Trying to write data to a text file using java.io.File
I am trying to create a text file and write data to it by using java.io.File and . I am using JDeveloper 10.1.3.2.0. When I try run the program I get a java.lang.NullPointerException error. Here is the snippet of code that I believe is calling the cl
-
Mail not synchronizing properly with .Mac
Mail is having problems synchronizing with my .Mac account. 1. Doesn't see new mail I can log in to my .Mac account and see new email in my Inbox. When I click on the Get Mail button in Mail, the little circle thingy will spin next to my Inbox and th
-
Sudo nvram boot-args='-v' not working in10.8
I want to turn on verbose via terminal. I used to use the above command in terminal. however it does not seem to work in ML. Has it changed?