PHP 5.1.2 released with re-factored OCI8 driver

PHP 5.1.2 has just been released: http://www.php.net/ChangeLog-5.php#5.1.2
It is the first release that includes the re-factored OCI8 extension.
I notice the test directory contains a bunch of tests for oci_bind_array_by_name(),
which people have been waiting for.
For older versions of PHP, you can download the re-factored OCI8 driver from
http://pecl.php.net/package/oci8, or get the Windows binaries from
http://pecl4win.php.net/ext.php/php_oci8.dll. Or, of course, use Zend Core for Oracle.
-- cj
PS I see there has been a bunch of activity in the forum over the break and I look
forward to catching up.

url mistake by cj:
http://pecl.php.net/package/oci8 ( without a comma ).

Similar Messages

Installing IdM 7.2 sp9 and connectivity with Success Factor

Hello Experts,
Looking forward to connect IdM 7.2 sp9 with Success Factor as Data Source System.
Since by default there's no connector available in this version, looking for information about setting up a new connector as to establish the connection.
Advise would be much appreciated.
-thanks
Yogesh

Hello Yogesh,
there is a connector delivered as standard from IdM relase 8.0 onwards. To date I have not see any connector for lower release but maybe somebody here will have tried ;-)
Regards,
Chris

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet?

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet? Am I wrong or was support for the D810 available far more quickly?

ACR 8.7 has not yet been released. The ACR 8.7RC has been released. It is a Release Candidate - and as such, is not a final version. I wouldn't be concerned about a lack of Lightroom support until a final version is released.
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs

Visual Studio 2013 Community Azure Login Not Working with Two-factor Authentication

Has anybody had any problems logging in to Azure to publish when using Visual Studio 2013 Community and with two-factor authentication turned on?
I couldn't log on until I turned off two-factor authentication.
Regards

Hello John,
Thanks for posting here!
You can try and set a credential helper like
git-credential-winstore in order to cache your credentials. See if that helps.
Couple of questions here:
1) Are you using a MSA account by any chance?
2) When you turn on two-factor authentication, do you get any error message?
3) Did you try with different browsers?
Looking forward to your response!
Regards,
Sadiqh

MDM Adapter supporting PI 7.0 released with MDM 7.1

Hi,
I have imported the MDM adapter which supports PI 7.0 and is released with MDM7.1 to facilitate Syndication/Import of data from/to MDM and configured the sender channel in PI for the same to fetch the file from the outbound port of MDM server.
I observe that when file is syndicated to outbound port and is ready for PI processing, the adapter do not instantly fetch the file from outbound port even for hours but when i make a dummy change in Communication channel and again activate the same then it fetches the file and processes it in PI but after that if any other file is syndicated in the outbound port i have to again manually make a dummy change and activate it in PI and so on.
I found one Sap Note 1452509 which is relevant to this but want to know if the settings mentioned in SAP note are to be made on MDM server or PI and if there is any other setting which i have to make in channel or in MDM so that file is processed instantly/near real time manner.
I am on PI7.0
Thanks,
Amit

Hey Amit,
If you are talking about "Restart the MDM ADAPTER java component" then it will be done on PI server. MDM system does not have any java component.
This is a common error which we also faced, it happens often right after the restart of MDM server.
I have seen cases where when MDM server was restarted, we had to come to PI and restart the MDM Adapter services to make Sender MDM Adapter pick files from Ready folder.
>>if there is any other setting which i have to make in channel or in MDM
No other settings are required
Thanks
Aamir
Edited by: Aamir Suhail on Feb 7, 2011 5:44 PM

PR item Release with Workflow

Hi All,
If anybody has worked on PR item release with Work-flow please share the process ...i know how to set up the PR release strategy but not aware of Work-flow setting...If anybody has the document please share......
I searched a lot in the Forum...but not getting the correct information..
Thanks in advance

Hi John,
The standard workflow template provided by SAP for PR Release item level is WS00000038. You can view workflow in transaction SWDD. You need to activate this template in basic data from u201Cstart eventsu201D tab.
In order to send notification mails from SAP to other services, such as Outlook, Lotus Notes etc, you need to configure SCOT.

Why ipad mini released with a non-retina display.. The only reason i didn't buy that..

I was so much after the ipad mini..
but released with the non-retina display and this put me down a lot and I didnt buy this one at all.
Now I am looking one but with a larger screen and where i can use that as a phone around 4.5" min.
Thanks

There are a few "phablets", small tablets that are also phones, but Apple does not make one. Thus far these "phablets" are not proving to be very popular, but if you think one would meet your needs, by all means look into them.
Regards.

New release strategy should not trgger for PO released with old Rel Strategy

Hi All,
Please suggest. Po has been fully released with Release Strtgy V1 XX. Now I m replacing release strategy XX with ZZ. If I change any po which has old rel str XX , system will reset new release strategy as in config changeability indicator 4 maintained.
But requirement is if there is any change or value decreasing in fully released Pos with old strategy it should not retrigger new release strategy. If value Increases then New strategy should retrigger.
Please help me on this.
regards,
Rohit

HI Rohit
A reset of the release strategy only takes place if
       - the changeability of the release indicator is set to '4' in
          case of a purchase requisition and '4' or '6' in case of
          another purchasing document (purchase order, request for
          quotation, contract, scheduling agreement),
       - the document is still subject to the previous release
          strategy,
       - the new TOTAL NET ORDER VALUE is higher than the old one.
The most important thing to consider in to avoid changes to release strategy customizing once the release strategy is used.
The commom steps are:
1- make sure all of the old POs should have been released.
2- don't delete/change the original release strategy. create a new release strategy with copy function, then the old release strategy will not be replaced.
3- if you delete the original release strategy and add a new release strategy which the characteristics in classification is same as old release strategy then the PO (have been approved) will be replaced with the new release strategy.
Kind regards,
Lorraine

Hi I would like to know if there will be a new phone released with iOS 8 this fall or is it just the software

Hi I would like to know of there will be a new release with an iphone this fall along with iOS 8

We're users here, not Apple. Why do you think we'd know any more than you do? Not to mention, speculation about unnounced products is strictly forbidden by the Terms of Use of this forum.

Why will Bridge CC not recognize a PHP file and ONLY open with notepad instead of Dreamweaver?

why will Bridge CC not recognize a PHP file and ONLY open with notepad instead of Dreamweaver?

Did you set the file association in Bridge to open with Dreamweaver?

No of Batches Released with Release date

Hi,
In my project, I need to find the no batches released with releases date.
Please help on this.
Thanks,
Mohan
Edited by: Mohan D on Jul 27, 2011 3:37 PM

Thanks for looking into my question.
I have a requirement like below.
For a given material and plant, I need to find no of batches manufactured, rejected , approved and released.
Based on QA status, I am able to see no of batches approved(QA status A), Rejected(QA Status R). But I do not know how to find/calculate no of batches released and also the release date.
Thanks,
Mohan

WITH Subquery Factoring OR "Scalar SubqueriesRun Another Query per row

Hi Experts
Please suggest
which one query is better
Involved table p is of size 2GB and c1/c2 of size 800M.
And we have to run a report on p which will do FTS (no where clause on p)
So FTS on 2 GB table and then running Another Query per row .. so results job very slow
1) Select p.id,
         (select sum(q1) from c1 where c1.id = p.id) c1_sum1,
         (select sum(q2) from c2 where c2.id = p.id) c2_sum2
   from p
2)
WITH Subquery Factoring
with c1_vw as
(select id, sum(q1) c1_sum1
    from c1
         group by id),
   c2_vw as
   (select id, sum(q2) c2_sum2
       from c2
      group by id),
   c1_c2 as
   (select c1.id, c1.c1_sum1, c2.c2_sum2
       from c1_vw c1, c2_vw c2
      where c1.id = c2.id )
   select p.id, c1_sum1, c2_sum2
      from p, c1_c2
     where p.id = c1_c2.id
   / 10.2..0.4
AIX 5.3
Thanks In Advance
ivw

ivw wrote:
which one query is betterThe better query IMHO is the one that returns the the correct results in the shortest amount of time using the least system resources (the last two items usually happen at the same time). Maintainability is an issue too. Which one do you like best?
Its hard to say which query will run best without running both, getting execution plans, and run-time statistics. At a pure guess I would think all things being equal they would have similar performance but do not really know.

Vmware horizon radius integration with two factor authentication

-1 down vote favorite
I have deployed vmware horizon view connection server (Evaluation/Trial version), i want to integrate it with two factor authentication server. But after configuring RADIUS parameters in admin portal of connection server, it’s not allowing me to save the settings. Please suggest.
I have attached the snap for your reference.

The SMTP server supports what is referred to as third party authentication. To take advantage of this you would need to provide all of the authentication code, however -- there's no way to do part of the authentication and then pass control back to the messaging server for the rest. So you'd need to do both password checks, one of which is presumably done via LDAP auth, yourself.
As far as LDAP proxy and RADIUS, we use a standard LDAP simple bind. The ODSEE LDAP proxy is often used in OCMS deployments, so that is a known good solution. We don't directly support RADIUS; the aforementioned third party authentication could be used to tie into such a system.
- Jeff

Bridge Table with Wieght Factor

Hi,
I have a scenario where , dim1(1:m)->Fact1<-->(m:m)Dim2
to achieve m:m relationship, i used bridge table like following
fact1<--grp-->brige<--dim2
--> weight factors for dim values are maintained in bridge table.
issue:
I have a paid_amt measure in fact1 table.
so when i drilled down to dim2 values i want to see (paid_amt*weight factor) i am not able to achieve this.
Can any body please share some light on how to create this measure with weight factor.
for users it should to transparent.
Thanks
Vik

i am not able to achieve this.What errors do you get? What's the issue?
http://catb.org/esr/faqs/smart-questions.html#beprecise

How to deploy connection (Mac OS X Yosemite to Windows RDS) through the RD Gateway with Two Factor authentication (Safenet OTP) on Session host?

Good day!
Could you please help me? How to deploy connection (Mac OS X Yosemite to Windows RDS) through the RD Gateway with Two Factor authentication on Session host? How to open an authentication dialog that is the same as in Windows when logging on to network resources
in Windows (Windows Security)?
Our test environment: We have one RDS 2012 R2 server (all roles in one) and one session host in collection. On the session host installed Safenet Network Logon and it under GPO which disable all authentication, only OTP.

Hi Sir,
It seems that you are going to integrate 3rd party product into AD for authentication .
I would suggest you to contact the vendor of Safenet for this deployment scenario :
http://www.safenet-inc.com/multi-factor-authentication/authentication-management/safenet-authentication-manager-express-samx/
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

PHP 5.1.2 released with re-factored OCI8 driver

Similar Messages

Maybe you are looking for