PHP and result sets: size and time

Hi
I'm tasked with debugging and "fixing" a PHP application which (someone else developed) is running slowly and "timing out", now that data is in there. I set about inserting some brief timing "debug" stuff within the code to attempt to determine where the rate limiting steps were happening. I found two areas in the code which were quite slow:
1) Query of the oracle database via a package, declaration of the procedure is:
procedure findAllSorted(sortMode in string, resultSet IN OUT types.cursortype);
2) looping on this and filling the array into objects
          while ($res = $result->FetchRow()) {
               // don't use $array[] = $this->load($res);, it throws an error
               $array[] = $this->doLoad($res);
My method timed the execution of both these steps:
1) Execution for oracle is:11.60035777092 Seconds
2) Execution for loop is:17.87319111824 Seconds
the amount of data that is returned by the fiindAllSorted() procedure is not what I'd call high, although that is part of my question here ... how much is a lot?
When I execute the procedure in PL/SQL Developer (and get all rows, not just the first 10) there are 1600 rows returned. When saved as a CSV file its about 260K of data ... I would not have thought this was problematic.
the other part of my question is (assuming people don't say "holy cow you're returning one thousand six hundred rows") how can I speed this part of the step up?

What values of oci8.default_prefetch or oci_set_prefetch() have you tried? See the discussion on p149 of The Underground PHP and Oracle Manual. I wonder if you are still using OCI8 1.2 with the lower default value.
Pre-fetching from REF CURSORS was first supported with Oracle 11gR2. You only need 11gR2 client libraries - pre-fetching from basic REF CURSORS will work when connected to older DB versions. See my blog post about Oracle Database 11gR2 Enhancements for PHP. New client libraries are available free from OTN. If you can't upgrade your Oracle Client libraries then perhaps you can refactor findAllSorted() and use pipelining. This is discussed on p172 of The Underground PHP and Oracle Manual.
Make sure your queries only select the columns you need.
Rasmus Lerdorf's recent talk http://talks.php.net/show/digg has some good overall PHP analysis and tuning tips.
To finish up, here is output from repeating a query with different prefetch values:
Time to fetch 1600 rows. Prefetch is 500 : Fetch time is: 0.085 seconds
Time to fetch 1600 rows. Prefetch is 100 : Fetch time is: 0.090 seconds
Time to fetch 1600 rows. Prefetch is 10 : Fetch time is: 0.144 seconds
Time to fetch 1600 rows. Prefetch is 0 : Fetch time is: 0.508 seconds

Similar Messages

Php and time limits for users logging in

Hi I am needing to adjust the available times a user is
allowed access to files. I have heard of cron jobs but I was
wondering if in Dreamweaver if you set a variable as a date e.g.
INSERT INTO employers ( paid_date ) VALUES (NOW());
and "SELECT paid_date FROM employers WHERE 'accesslevel' <
ADDDATE(NOW(), INTERVAL 1DAY);"
I am trying to get my head around the best way. I was
thinking to insert the NOW() to get the current date but confused
myself how to incorporate this into their access level.
Hope someone has some ideas, it would save a lot of time to
update the access level automatically.
Thanks

Good evening.
ASA is an engineer TaeYang.
He said setting in the ACL Time range
This from Recurring Time Ranges.
Tap the "ADD" button
Select a Weekdays.
Here you can set the time at will.
Thank you.
-Tae Yang-

Retrieving a part of big result set at a time

I will try to present a simplistic view of the problem at hand. I
want to display large volume of data on a web page. We are
interested in displaying 50 records and a time and want to
control it at the database level. I am looking at some option to
pass the database the information that I need 1-50 records from
the selected records (then 51-100 and so on).
I want to keep it as simple as possible and came up with this script:
select myrow, col1
     from (Select rownum myrow, col1 from mytable)
     where myrow > 0 and myrow < 51;
where mytable is a table with a column col1.
For the sake of simplicity I have removed other where clauses.
This options works but the data is not ordered. I want to
retrieve the data in ordered fashion and then retrieve first 50
and so on. I want to do something like:
select myrow, col1
     from (Select rownum myrow, col1
from mk
order by col1)
     where myrow > 2 and myrow < 4;
but Oracle does not let me put order by with the nested select.
Does anyone have a suggestion to resolve this issue? It could be
a totally different solution as long as it is straight forward.
Using a cursor or temp tables is not practical since it won't
meet our performance parameters.
Any suggestions ???
TIA

select tp2.col1, tp2.myrow
from (select rownum myrow, tp1.col1
from (Select col1
from mytable
order by col1) tp1
) tp2
where tp2.myrow > 0 and tp2.myrow < 51;

Web Services with Large Result Sets

Hi,
We have an application where in a call to a web service could potentially yield a large result set. For the sake of argument, lets say that we cannot limit the result set size, i.e., by criteria narrowing or some other means.
Have any of you handled paging when using Web Services? If so can you please share your experiences considering Web Services are stateless? Any patterns that have worked? I am aware of the Value List pattern but am looking for previous experiences here.
Thanks

Joseph Weinstein wrote:
Aswin Dinakar wrote:
I ran the test again and I removed the ResultSet.Fetch_Forward and it
still gave me the same error OutOfMemory.
The problem to me is similar to what Slava has described. I am parsing
the result set in memory storing the results in a hash map and then
emptying the post processed results into a table.
The hash map turns out to be very big and jvm throws a OutOfMemory
Exception.
I am not sure how I can turn this around -
I can partition my query so that it returns smaller chunks or "blocks"
of data each time(say a page of data or two pages of data). Then I can
store a page of data in the table. The problem with this approach is
that it is not exactly transactional. Recovery would be very difficult
in this approach.
I could do this in a try catch block page by page and then the catch
could go ahead and delete the rows that got committed. The question then
becomes what if that transaction fails ?It sounds like you're committing the 'cardinal performance sin of DBMS processing',
of shovelling lots of raw data out of the DBMS, processing it in some small way,
and sending it (or some of it) back. You should instead do this processing in
a stored procedure or procedures, so the data is manipulated where it is. The
DBMS was written from the ground up to be a fast efficient set-based processor.
Using clever SQL will pay off greatly. Build your saw-mills where the trees are.
JoeYes we did think of stored procedures. Like I mentioned yesterday some of the post
processing depends on unicode and specific character sets. Java seemed ideally suited
to this since it handles these unicode characters very well and has all these libraries
we can use. Moving this to DBMS would mean we would make that proprietary (not that we
wont do it if it became absolutely essential) but its one of the reasons why the post
processing happens in java. Now that you mention it stored procedures seem the best
option.

Modifying the Default Result Set on the Results Tab of the SQLWorksheet

I have found the previous posts indicating that the default result set size is 50, that it is not currently able to be modified and (good news) that an enhancement will be coming to correct this.
I thought I would give my two cents on how this option might be configured:
Either in the 'View-Options-(output options)' or the 'Tools-Preferences-Environment' areas, have two options. The first would be something like "Max Rows to Display in Results Window" and the second would be sometihng like "Max Rows to Load when end of Current display is reached."
The first option is certainly most essential, but the latter option I have to explain a little. Say you set your max rows to display to 500. You scroll (drag bar, arrow down, etc) to record 501. At this point, the setting on the "Max Rows to Load When End of Current Display is Reached" option comes into play. This setting will then be read to determine how many rows are to be loaded each time the user gets to the current end of display. The second option adds some flexility to how data rows will be displayed after the initial data rows are loaded.
You could just default the number of rows added to the display to the setting set in the "Max Rows to Display in Results Window" setting, although I would say that this would be less flexible. Whatever you do, don't follow the Toad example of loading ALL records when dragging the vertical bar to the bottom of the display grid.
Thank You for your time.
Scott Lips

I like the idea.. please post this on the sister website so that people can vote on it.
http://sqldeveloper.oracle.com/

Af:inputListOfValues sets value of first item in result set when using enter key or tab and component set to autosubmit=true

I'm using JDev 11.1.1.6 and when I type a value into an af:inputListOfValues component and hit either the enter key or the tab key it will replace the value I entered with the first item in the LOV result set. If enter a value and just click out of the af:inputListOfValues component it works correctly. If I use the popup and search for a value it works correctly as well. I have a programmatic view object which contains a single transient attribute (this is the view object which is used to create the list of value component from) and then I have another entity based view object which defines one of its attributes as a list of value attribute. I tried using an entity based view object to create the LOV from and everything works as expected so I'm not sure if this is a bug when using programmatic view objects or if I need more code in the VOImpl. Also, it seems that after the first time of the value being replaced by the first value in the result set that it will work correctly as well. Below are some of the important code snippets.
Also, it looks like it only doesn't work if the text entered in the af:inputListOfValues component would only have a single match returned in the result set. For instance given the result set in the code: Brad, Adam, Aaron, Fred, Charles, Charlie, Jimmy
If we enter Cha, the component works as expected
If we enter A, the component works as expected
If we enter Jimmy, the component does not work as expected and returns the first value of the result set ie. Brad
If we enter Fred, the component does not work as expected and returns the first value of the result set ie. Brad
I also verified that I get the same behavior in JDev 11.1.1.7
UsersVOImpl (Programmatic View Object with 1 transient attribute)
import java.sql.ResultSet;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import oracle.adf.share.logging.ADFLogger;
import oracle.jbo.JboException;
import oracle.jbo.server.ViewObjectImpl;
import oracle.jbo.server.ViewRowImpl;
import oracle.jbo.server.ViewRowSetImpl;
// ---    File generated by Oracle ADF Business Components Design Time.
// ---    Wed Sep 18 15:59:44 CDT 2013
// ---    Custom code may be added to this class.
// ---    Warning: Do not modify method signatures of generated methods.
public class UsersVOImpl extends ViewObjectImpl {
    private static ADFLogger LOGGER = ADFLogger.createADFLogger(UsersVOImpl.class);
    private long hitCount = 0;
     * This is the default constructor (do not remove).
    public UsersVOImpl () {
     * executeQueryForCollection - overridden for custom java data source support.
    protected void executeQueryForCollection (Object qc, Object[] params, int noUserParams) {
         List<String> usersList = new ArrayList<String>();
         usersList.add("Brad");
         usersList.add("Adam");
         usersList.add("Aaron");
         usersList.add("Fred");
         usersList.add("Charles");
         usersList.add("Charlie");
         usersList.add("Jimmy");
         Iterator usersIterator = usersList.iterator();
         setUserDataForCollection(qc, usersIterator);
         hitCount = usersList.size();
         super.executeQueryForCollection(qc, params, noUserParams);
    } // end executeQueryForCollection
     * hasNextForCollection - overridden for custom java data source support.
    protected boolean hasNextForCollection (Object qc) {
         Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
         if (usersListIterator.hasNext()) {
             return true;
         } else {
             setFetchCompleteForCollection(qc, true);
             return false;
         } // end if
    } // end hasNextForCollection
     * createRowFromResultSet - overridden for custom java data source support.
    protected ViewRowImpl createRowFromResultSet (Object qc, ResultSet resultSet) {
         Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
         String user = (String)usersListIterator.next();
         ViewRowImpl viewRowImpl = createNewRowForCollection(qc);
         try {
             populateAttributeForRow(viewRowImpl, 0, user.toString());
         } catch (Exception e) {
             LOGGER.severe("Error Initializing Data", e);
             throw new JboException(e);
         } // end try/catch
         return viewRowImpl;
    } // end createRowFromResultSet
     * getQueryHitCount - overridden for custom java data source support.
    public long getQueryHitCount (ViewRowSetImpl viewRowSet) {
         return hitCount;
    } // end getQueryHitCount
    @Override
    protected void create () {
         getViewDef().setQuery(null);
         getViewDef().setSelectClause(null);
         setQuery(null);
    } // end create
    @Override
    protected void releaseUserDataForCollection (Object qc, Object rs) {
         Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
         usersListIterator = null;
         super.releaseUserDataForCollection(qc, rs);
    } // end releaseUserDataForCollection
} // end class
<af:inputListOfValues id="userName" popupTitle="Search and Select: #{bindings.UserName.hints.label}" value="#{bindings.UserName.inputValue}"
                                              label="#{bindings.UserName.hints.label}" model="#{bindings.UserName.listOfValuesModel}" required="#{bindings.UserName.hints.mandatory}"
                                              columns="#{bindings.UserName.hints.displayWidth}" shortDesc="#{bindings.UserName.hints.tooltip}" autoSubmit="true"
                                              searchDesc="#{bindings.UserName.hints.tooltip}"
                                              simple="true">
                          <f:validator binding="#{bindings.UserName.validator}"/>
</af:inputListOfValues>

I have found a solution to this issue. It seems that when using a programmatic view object which has a transient attribute as its primary key you need to override more methods in the ViewObjectImpl so that it knows how to locate the row related to the primary key when the view object records aren't in the cache. This is why it would work correctly sometimes but not all the time. Below are the additional methods you need to override. The logic you use in retrieveByKey would be on a view object by view object basis and would be different if you had a primary key which consisted of more than one attribute.
@Override
protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i) {
    return retrieveByKey(viewRowSetImpl, null, key, i, false);
@Override
protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, String string, Key key, int i, boolean b) {
    RowSetIterator usersRowSetIterator = this.createRowSet(null);
    Row[] userRows = usersRowSetIterator.getFilteredRows("UserId", key.getAttribute(this.getAttributeIndexOf("UserId")));
    usersRowSetIterator.closeRowSetIterator();
    return userRows;
@Override
protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i, boolean b) {
    return retrieveByKey(viewRowSetImpl, null, key, i, b);

Result set looping and arrays??????????

Hey i have a result set problem in using an applet connected to a database.
After i have accessed a database, i am using a result set to store these values, then put them into arrays to out put to screen. im using:
count = 0;
while(rs.next())
lecturer[count] = rs.getString("FirstName") + " " + rs.getString("Surname");
room[count] = rs.getString("Room_No");
sentence = rs.getString("Subjects");
if(sentence.length()>12)
space = sentence.indexOf(" ");
subject[count] = sentence.substring(0,(space));
subject2[count] = sentence.substring((space+1),sentence.length());
else
subject[count] = sentence;
subject2[count] = " ";
timeslot[count] = rs.getInt("Time_slot");
count++;
resCount++;
rs.close();
stm.close();
The while is there untill there are no more values in the result set. This should work(in theory). But for some reason the while loop goes around and around until 'size' (which is the size for all the arrays) is reached. This is a set value at the start of the applet. But whenever i change it the while loop goes around that many times without fail. this results in duplicate outputs to screen, that i dont want.
Anyone got any ideas????????????

This flow doesn't make too much sense to me. Why are you setting an absolute limit on the length of the array, if it should really be determined by the number of rows in your resultset. It sounds like you would be better off using a Collection class, like:
List names = new ArrayList();
while(rs.next()) {
names.add(rs.getString("name"));
}

Why to need close the result set and statement

why to need close the result set and statement

It's best to explicitly close every ResultSet, Statement, and Connection in the narrowest scope possible.
These should be closed in a finally block.
Since each close() method throws SQLException, each one should be in an individual try/catch block to ensure that a failure to close one won't ruin the chances for all the others.
You can capture this in one nice utility class, like this:
package db;
import java.sql.*;
import java.util.ArrayList;
import java.util.Map;
import java.util.LinkedHashMap;
import java.util.List;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
* Created by IntelliJ IDEA.
* User: MD87020
* Date: Feb 16, 2005
* Time: 8:42:19 PM
* To change this template use File | Settings | File Templates.
public class DatabaseUtils
     * Logger for DatabaseUtils
    private static final Log logger = LogFactory.getLog(DatabaseUtils.class);
    /** Private default ctor to prevent subclassing and instantiation */
    private DatabaseUtils() {}
     * Close a connection
     * @param connection to close
    public static void close(Connection connection)
        try
            if ((connection != null) && !connection.isClosed())
                connection.close();
        catch (SQLException e)
            logger.error("Could not close connection", e);
     * Close a statement
     * @param statement to close
    public static void close(Statement statement)
        try
            if (statement != null)
                statement.close();
        catch (SQLException e)
            logger.error("Could not close statement", e);
     * Close a result set
     * @param rs to close
    public static void close(ResultSet rs)
        try
            if (rs != null)
                rs.close();
        catch (SQLException e)
            logger.error("Could not close result set", e);
     * Close both a connection and statement
     * @param connection to close
     * @param statement to close
    public static void close(Connection connection, Statement statement)
        close(statement);
        close(connection);
     * Close a connection, statement, and result set
     * @param connection to close
     * @param statement to close
     * @param rs to close
    public static void close(Connection connection,
                             Statement statement,
                             ResultSet rs)
        close(rs);
        close(statement);
        close(connection);
     * Helper method that maps a ResultSet into a map of columns
     * @param rs ResultSet
     * @return map of lists, one per column, with column name as the key
     * @throws SQLException if the connection fails
    public static final Map toMap(ResultSet rs) throws SQLException
        List wantedColumnNames = getColumnNames(rs);
        return toMap(rs, wantedColumnNames);
     * Helper method that maps a ResultSet into a map of column lists
     * @param rs ResultSet
     * @param wantedColumnNames of columns names to include in the result map
     * @return map of lists, one per column, with column name as the key
     * @throws SQLException if the connection fails
    public static final Map toMap(ResultSet rs, List wantedColumnNames)
        throws SQLException
        // Set up the map of columns
        int numWantedColumns    = wantedColumnNames.size();
        Map columns             = new LinkedHashMap(numWantedColumns);
        for (int i = 0; i < numWantedColumns; ++i)
            List columnValues   = new ArrayList();
            columns.put(wantedColumnNames.get(i), columnValues);
        while (rs.next())
            for (int i = 0; i < numWantedColumns; ++i)
                String columnName   = (String)wantedColumnNames.get(i);
                Object value        = rs.getObject(columnName);
                List columnValues   = (List)columns.get(columnName);
                columnValues.add(value);
                columns.put(columnName, columnValues);
        return columns;
     * Helper method that converts a ResultSet into a list of maps, one per row
     * @param rs ResultSet
     * @return list of maps, one per row, with column name as the key
     * @throws SQLException if the connection fails
    public static final List toList(ResultSet rs) throws SQLException
        List wantedColumnNames = getColumnNames(rs);
        return toList(rs, wantedColumnNames);
     * Helper method that maps a ResultSet into a list of maps, one per row
     * @param rs ResultSet
     * @param wantedColumnNames of columns names to include in the result map
     * @return list of maps, one per column row, with column names as keys
     * @throws SQLException if the connection fails
    public static final List toList(ResultSet rs, List wantedColumnNames)
        throws SQLException
        List rows = new ArrayList();
        int numWantedColumns = wantedColumnNames.size();
        while (rs.next())
            Map row = new LinkedHashMap();
            for (int i = 0; i < numWantedColumns; ++i)
                String columnName   = (String)wantedColumnNames.get(i);
                Object value = rs.getObject(columnName);
                row.put(columnName, value);
            rows.add(row);
        return rows;
      * Return all column names as a list of strings
      * @param rs query result set
      * @return list of column name strings
      * @throws SQLException if the query fails
    public static final List getColumnNames(ResultSet rs) throws SQLException
        ResultSetMetaData meta = rs.getMetaData();
        int numColumns = meta.getColumnCount();
        List columnNames = new ArrayList(numColumns);
        for (int i = 1; i <= numColumns; ++i)
            columnNames.add(meta.getColumnName(i));
        return columnNames;
}Anybody who lets the GC or timeouts or sheer luck handle their resource recovery for them is a hack and gets what they deserve.
Do a search on problems with Oracle cursors being exhausted and learn what the root cause is. That should convince you.
scsi-boy is 100% correct.
%

APPLE TV 2 HD model and updated to latest version 6.1.1 since doing that it won't set date and time and tells me my Apple ID and password are incorrect and I know there not. What do I do?

It connects to internet fine. I have tried restoring back to factory condition and hard wire update by connecting it to my Mac mini .
The date and time won't set. And won't acknowledge my Apple ID and password......... I am usually tech savy but this has caused me grief .
Do I need to downgrade my update....
But can't get any menus until I log in my apple account...
It can't log into my iTunes account until time and date have been set.
When I did the hard wire restore connected to Mac mini it wouldn't go past the date and time screen as it wouldn't when I did the wifi update too.
it just would get past that screen.
Anyone help!!

This is the result of a network issue. Ensure port 123 on the router is open.

JSP Servlet and convert the result set of an SQL Query To XML file

Hi all
I have a problem to export my SQL query is resulty into an XML file I had fixed my servlet and JSP so that i can display all the records into my database and that the goal .Now I want to get the result set into JSP so that i can create an XML file from that result set from the jsp code.
thisis my servlet which will call the jsp page and the jsp just behind it.
//this is the servlet
import java.io.*;
import java.lang.reflect.Array;
import java.sql.*;
import java.util.ArrayList;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.naming.*;
import javax.sql.*;
public *class *Campaign *extends *HttpServlet
*private* *final* *static* Logger +log+ = Logger.+getLogger+(Campaign.*class*.getName());
*private* *final* *static* String +DATASOURCE_NAME+ = "jdbc/SampleDB";
*private* DataSource _dataSource;
*public* *void* setDataSource(DataSource dataSource)
_dataSource = dataSource;
*public* DataSource getDataSource()
*return* _dataSource;
*public* *void* init()
*throws* ServletException
*if* (_dataSource == *null*) {
*try* {
Context env = (Context) *new* InitialContext().lookup("java:comp/env");
_dataSource = (DataSource) env.lookup(+DATASOURCE_NAME+);
*if* (_dataSource == *null*)
*throw* *new* ServletException("`" + +DATASOURCE_NAME+ + "' is an unknown DataSource");
} *catch* (NamingException e) {
*throw* *new* ServletException(e);
protected *void *doGet(HttpServletRequest request, HttpServletResponse response)
throws IOException, ServletException
Connection conn = *null*;
*try* {
conn = getDataSource().getConnection();
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("select post_id,comments,postname from app.posts");
// out.println("Le résultat :<br>");
ArrayList <String> Lescomments= *new* ArrayList<String>();
ArrayList <String> Lesidentifiant = *new* ArrayList<String>();
ArrayList <String> Lesnoms = *new* ArrayList <String>();
*while* (rs.next()) {
Lescomments.add(rs.getString("comments"));
request.setAttribute("comments",Lescomments);
Lesidentifiant.add(rs.getString("post_id"));
request.setAttribute("id",Lesidentifiant);
Lesnoms.add(rs.getString("postname"));
request.setAttribute("nom",Lesnoms);
rs.close();
stmt.close();
*catch* (SQLException e) {
*finally* {
*try* {
*if* (conn != *null*)
conn.close();
*catch* (SQLException e) {
// les paramètres sont corrects - on envoie la page réponse
getServletContext().getRequestDispatcher("/Campaign.jsp").forward(request,response);
}///end of servlet
}///this is the jsp page called
<%@ page import="java.util.ArrayList" %>
<%
// on récupère les données
ArrayList nom=(ArrayList)request.getAttribute("nom");
ArrayList id=(ArrayList)request.getAttribute("id");
ArrayList comments=(ArrayList) request.getAttribute("comments");
%>
<html>
<head>
<title></title>
</head>
<body>
Liste des campagnes here i will create the xml file the problem is to display all rows
<hr>
<table>
<tr>
</tr>
<tr>
<td>Comment</td>
<td>
<%
for( int i=0;i<comments.size();i++){
out.print("<li>" + (String) comments.get(i) + "</li>\n");
}//for
%>
</tr>
<tr>
<td>nom</td>
<td>
<%
for( int i=0;i<nom.size();i++){
out.print("<li>" + (String) nom.get(i) + "</li>\n");
}//for
%>
</tr>
<tr>
<td>id</td>
<td>
<%
for( int i=0;i<id.size();i++){
out.print("<li>" + (String) id.get(i) + "</li>\n");
}//for
%>
</tr>
</table>
</body>
</html>
This is how i used to create an XML file in a JSP page only without JSP/SERVLET concept:
<%@ page import="java.sql.*" %>
<%@ page import="java.io.*" %>
<%
// Identify a carriage return character for each output line
int iLf = 10;
char cLf = (*char*)iLf;
// Create a new empty binary file, which will content XML output
File outputFile = *new* File("C:\\Users\\user\\workspace1\\demo\\WebContent\\YourFileName.xml");
//outputFile.createNewFile();
FileWriter outfile = *new* FileWriter(outputFile);
// the header for XML file
outfile.write("<?xml version='1.0' encoding='ISO-8859-1'?>"+cLf);
try {
// Define connection string and make a connection to database
Connection conn = DriverManager.getConnection("jdbc:derby://localhost:1527/SAMPLE","app","app");
Statement stat = conn.createStatement();
// Create a recordset
ResultSet rset = stat.executeQuery("Select * From posts");
// Expecting at least one record
*if*( !rset.next() ) {
*throw* *new* IllegalArgumentException("No data found for the posts table");
outfile.write("<Table>"+cLf);
// Parse our recordset
// Parse our recordset
*while*(rset.next()) {
outfile.write("<posts>"+cLf);
outfile.write("<postname>" + rset.getString("postname") +"</postname>"+cLf);
outfile.write("<comments>" + rset.getString("comments") +"</comments>"+cLf);
outfile.write("</posts>"+cLf);
outfile.write("</Table>"+cLf);
// Everything must be closed
rset.close();
stat.close();
conn.close();
outfile.close();
catch( Exception er ) {
%>

Please state your problem that you are having more clearly so we can help.
I looked at your code I here are a few things you might consider:
It looks like you are putting freely typed-in comments from end-users into an xml document.
The problem with this is that the user may enter characters in his text that have special meaning
to xml and will have to be escaped correctly. Some of these characters are less than character, greater than character and ampersand character.
You may also have a similiar problem displaying them on your JSP page since there may be special characters that JSP has.
You will have to read up on how to deal with these special characters (I dont remember what the rules are). I seem to recall
if you use CDATA in your xml, you dont have to deal with those characters (I may be wrong).
When you finish writing your code, test it by entering all keyboard characters to make sure they are processed, stored in the database,
and re-displayed correctly.
Also, it looks like you are putting business logic in your JSP page (creating an xml file).
The JSP page is for displaying data ONLY and submitting back to a servlet. Put all your business logic in the servlet. Putting business logic in JSP is considered bad coding and will cause you many hours of headache trying to debug it. Also note: java scriptlets in a JSP page are only run when the JSP page is compiled into a servlet by java. It does not run after its compiled and therefore you cant call java functions after the JSP page is displayed to the client.

Query Performance and Result Set Query/Sub-Query

Hi,
I have an infoset with as many as <b>15 joins</b> with different ODS and Master Data..<b>The ODS are quite huge with 20 million, 160 million records)...</b>Its taking a lot of time even for a few days and need to get atleast 3 months data in a reasonable amount of time....
Could anyone please tell me whether <b>Sub-Query or Result Set Query have to be written against the same InfoProvider</b> (Cube, Infoset, etc)...or they can be used in queries
on different infoprovider...
Please suggest...Thanks in Advance.
Regards
Anil

Hi Bhanu,
Needed some help defining the Precalculated Value Set as I wasnt succesful....
Please suggest answers if possible for the questions below
1) Can I use Filter Criteria for restricting the value set for the characteristic when I Define a Query on an ODS. When i tried this it gave me errors as below ..
"System error in program CL_RSR_REQUEST and form EXECUTE_VTABLE:COB_PRO_GET_ALWAYS.... Error when filling value set DELIVERY..
Job cancelled after system exception ERROR_MESSAGE"
2) Can I create a create a Value Set predefined on an Infoset - Not Succesful as Infoset have names such as "InfosetName_F000232" and cannot find the characteristic in Paramter Tab for Value Set in Reprting Agent.
3) How does the precalculated value Set variable help if I am not using any Filtering Criteria and is storing the List of all values for the Variable from the ODS which consists of 20 millio records.
Thanks for your help.
Kind Regards
Anil

Manual setting of date and time-..

After finally getting my ATV3 updated to 6.2 via an iTunes restore with USB. I am now stuck at the activating screen with the sub note of setting date and time.
I have reset and restored multiple times now. Reset my entire network. Disconnected cables and power. Connected via Wi-Fi as well as ethernet cable. All with the same results of hanging at the Activating screen. After skipping the screen, (waited for almost 3 hours this last go around) I inspect the About info and can see the Network Time heading as Skipped (reachable) and the Activation as Failed (Skipped)
I do know that my ISP blocks NTP requests except to two particular addresses. Since I can’t change that on the ATV, are there any other options?
My ATV was working OK before the update /restore. Should have left well enough alone. Small Airplay issue started this whole fiasco.

After trying multiple times to get everything to sync up and more research I found that indeed it is my ISP NTP blocking that is causing my problem.
I ended up using my cell phone as a hotspot and linked the ATV to it and in seconds flat all my problems were gone!
I then reset my WiFi to my home network and all is well!
The ATV is now back to normal with the latest update.

Service order is on product deliver status ,then i want to display product delivery status date and time on result list ?

Hi Team,
service order is on product deliver status ,then i want to display product delivery status date and time on result list ?My requirement is i want to display product delivery status date and time based on delivery status we need to display the date and time .how to do it.? basically i have created the productu delivery status field in search and result through AET.
Now the fields will be available in BTADMINH.
how to set based on status delivery to get the date and time .
Thanks
Kalpana

HI Ajay,
I have added code in BT116h_srvo,attributes - LCSTATUS,method - SET_LCSTATUS.but after change status f8 ..but the value is not filled in result list..so i need to write the logic in EH_ONSAVE or some other..could you please help here..what change i need to do..
IF
<nval> = 'E0004'.
DATA : lv_date TYPE dats.
DATA : lv_time TYPE tims.
lv_date = sy-datum.
lv_time = sy-uzeit.
DATA : lr_parent TYPE REF TO cl_crm_bol_entity,
lr_adminh TYPE REF TO cl_crm_bol_entity,
lr_root TYPE REF TO cl_crm_bol_entity,
lv_process_type TYPE crmt_process_type,
lv_parent_name TYPE crmt_ext_obj_name,
lr_current TYPE REF TO cl_crm_bol_entity.
lr_current ?= current.
lr_parent ?= lr_current->get_parent( ).
CHECK lr_parent IS BOUND.
CALL METHOD lr_parent->get_parent
RECEIVING
rv_result = lr_adminh.
CHECK lr_adminh IS BOUND.
TRY.
CALL METHOD lr_adminh->set_property
EXPORTING
iv_attr_name = '/itcit/F0010'
iv_value = lv_date. "value.
CATCH cx_sy_conversion_error .
ENDTRY.
TRY.
CALL METHOD lr_adminh->set_property
EXPORTING
iv_attr_name = '/itcit/F0011'
iv_value = lv_time.
CATCH cx_sy_conversion_error .
ENDTRY.
ENDIF.
Thanks
kalpana

Loop through result set and delete row

so here is what I need -
I have a query that pulls rows from the Database through a stored procedure.(these are properties in an area)
Before I start looping through the query, I need to check the distance between my current location and the property. If it less than 5 miles, only then should I display that property. The distance in miles will be chosen while submitting the search form.
So is there a way to delete rows from the result set based on the criteria? Or
Is there a better way to accomplish this? I am using the the google api to get the latitudes and longitudes. The other issue to keep in mind is the load time.
Thanks

You can do this the easy way or the hard way. Depends on whether your condition that needs to be checked can be expressed in the form of a SQL where clause. If it can, then do what BKBK suggested, and use a query of query to create a new resultset that only has the rows from the original resultset that don't meet your condition.
If the calculation of the condition is more complex, then do a CFLOOP over the query and examine each row to see if you want to keep it or toss it. if you want to toss it, the delete that row - there is a function in CFLIB.ORG called querydeleterow that should help you. Or, you could just clear out the row's contents and then do the query of query as described in BKBK's post to create a new resultset that doesn't include the blank rows.

Help with streaming result sets and prepared statements

hi all
I create a callable statement that is capable of streaming.
statement = myConn2.prepareCall("{call graphProc(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}",java.sql.ResultSet.TYPE_FORWARD_ONLY,
java.sql.ResultSet.CONCUR_READ_ONLY);
statementOne.setFetchSize(Integer.MIN_VALUE);
the class that contains the query is instantiated 6 times the first class streams the results beautifully and then when the second
rs = DatabaseConnect.statementOne.executeQuery();
is executed I get the following error
java.sql.SQLException: Can not use streaming results with multiple result statements
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.MysqlIO.readAllResults(MysqlIO.java:1370)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1688)
at com.mysql.jdbc.Connection.execSQL(Connection.java:3031)
at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.java:943)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1049)
at com.mysql.jdbc.CallableStatement.executeQuery(CallableStatement.java:589)
the 6 instances are not threaded and the result set is closed before the next query executes is there a solution to this problem it would be greatly appreciated
thanks a lot
Brian

Database resources should have the narrowed scope
possible. I don't think it's a good idea to use a
ResultSet in a UI to generate a graph. Load the data
into an object or data structure inside the method
that's doing the query and close the ResultSet in a
finally block. Use the data structure to generate
the graph.
It's an example of MVC and layering.
Ok that is my bad for not elaborating on the finer points sorry, the results are not directly streamed into the graphs from the result set. and are processed in another object and then plotted from there.
with regards to your statement in the beginning I would like to ask if you think it at least a viable option to create six connections. with that said would you be able to give estimated users using the six connections under full usage.
just a few thoughts that I want to
bounce off you if you don't mind. Closing the
statement would defeat the object of of having a
callable statement How so? I don't agree with that.
%again I apologise I assumed that since callable statements inherit from prepared statements that they would have the pre compiled sql statement functionality of prepared statements,well If you consider in the example I'm about to give maybe you will see my point at least with regards to this.
The statement that I create uses a connection and is created statically at the start of the program, every time I make a call the same statement and thus connection is used, creating a new connection each time takes up time and resources. and as you know every second counts
thanks for your thoughts
Brian.

PHP and result sets: size and time

Similar Messages

Maybe you are looking for