Php-cgi php not same version still works?
Maybe this post should have gone in the Package issues forum, but I thought more people would know about that kind of thing in this forum.
Anyways, I noticed that php-cgi was at version 5.2.1 and php main package is at 5.2.2. If i'm using lighttpd does this combination still work? Or should I flag php-cgi out of date?
I don't have much experience with php and php-cgi itself, I just set up my lighttpd server to support php through fcgi.
Well after the new php version got updated I tried to upgrade and it said that it conflicts with php-cgi. Obviously I couldn't know at that point that php now includes the php-cgi binary. So I created this post after I decided to cancel the upgrade process because I thought the conflict means that old php-cgi doesn't work with new php package.
Well now I just let it upgrade and it works (it even shows the cgi php.ini advise - but that doesn't completely tell that cgi is included; of course I could have gone for trial and error, but I didn't want to risk that on my server).
Thanks again for sorting this out.
Similar Messages
-
I have Garageband version 4.1.2 (248.7) installed on my early 2008 IMAC 10.5.8. I have never upgraded. If I upgrade my operating system to the next level (10.6?) will my GB version still work? I have a LOT of projects involved and hope they will transfer. Can I (and should I) upgrade GB at the same time and how far should I go with that without causing a problem with my projects? What would I gain if I upgrade GB? Thanks!
Nancyfromeasttexas wrote:
I have Garageband version 4.1.2 (248.7) [...] If I upgrade my operating system to the next level (10.6?) will my GB version still work?
my copy of 4.1.2 appears to work under 10.6.8, though i have not done extensive tests
Nancyfromeasttexas wrote:
I have a LOT of projects involved and hope they will transfer.
they should
Nancyfromeasttexas wrote:
Can I (and should I) upgrade GB at the same time
sure
Nancyfromeasttexas wrote:
(and should I) upgrade GB at the same time
v4 is pretty lonh in the tooth now, and GB only costs $15, so I'd think it's a good idea
Nancyfromeasttexas wrote:
how far should I go with that without causing a problem with my projects?
the only version you can buy new is v6,a nd it should open older projects without issue ... however you could keep 4 around:
http://www.bulletsandbones.com/GB/GBFAQ.html#installnewkeepold
(Let the page FULLY load. The link to your answer is at the top of your screen)
Nancyfromeasttexas wrote:
What would I gain if I upgrade GB?
v5:
http://www.bulletsandbones.com/GB/GBFAQ.html#whatsnew09
(Let the page FULLY load. The link to your answer is at the top of your screen)
v6:
http://www.bulletsandbones.com/GB/GBFAQ.html#whatsnew11
(Let the page FULLY load. The link to your answer is at the top of your screen) -
since downloading maverick, finder is not responsive; a safe restart did not help; dock still works; programs can be accessed
The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to acces the built in utilities in OS X Recovery
Make sure to back up all important files first before using OS X Recovery.
OS X Recover does require a broadband high speed internet connection. -
Dreamweaver CS5 with PHP, not getting it to work with virtual Host
I have not got far with the book so far. I am still on the second chapter where you set the Virtual Host but after setting up the Dreamweaver site definition and doing the test. I get the error that page cannot be found.
I ask if I can mail the text file of the http.conf and the httpd-vhosts.conf to anyone to see if I screwed up somewhere . I am running on Windows 7 with the WAMP setup.Mr. Powers,
I used your included file httpd-vhosts.conf. And it did something since now I get a new set of errors.
( ! ) Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
( ! ) Fatal error: Unknown: Failed opening required 'C:/vhosts/phpcs5/lesson02/site_check.php' (include_path='.;C:\php\pear') in Unknown on line 0
But I checked the properties of the folders and unchecked the 'read only' permission but still gets checked again. I am using Windows 7 64-bit.
I checked on the web nobody says any solutions about it, they only imply that is a permissions issue.
I apologize, I found out the chapter files were encrypted... thanks -
Nothing more to add
Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10". -
I can't search for apps in App Store why not? Genius still works but not search?
Why can't I search for apps but can still use genius?
I have same issue. It will let me know to update apps.
But if I want to search an app my friend may have. Nothing comes up after typing it in the search bar.
Same with the featured apps or the star charts , nothing comes up.
Now I just updated my iPad and so far so good. But my iPhone 4S is the problem since upgrading to ios6.
What to do.....
Apple...... You shouldn't rush these things.... Take your time and make it right .....
Any ideas .. Guess we just have to wait for apple to fix the issue... -
Iphone 3gs i resetted all settings and alarms not showing but still working
iphone 3gs i resetted all settings and alarm clock is not showing alarms i setted up before hand but are still going off cant turn them off or delete them
Fixed I created 2 new alarms and then disabled one and deleted the other. When the time came for one of the alarms to go off it did not.
-
N8 not charging but still working
I bought my new Nokia N8 2 weeks ago. At first time when I charged my phone it was all right. At the second and third time there was a small problem and I must about 2 minutes take out and in my phone loader but it's finally worked. But at the fourth time loader didn't working. I'm not destroyed my phone loader or something like that.. Phone is not bad because I charge it my old loader from nokia E66 and it was working. Please help what I should do.
I would suggest that you take your phone charger cables etc (in other words the box and everything that came in it) back to the shop you bought it from and see if they can help. It may be a faulty charger or a faulty battery, who knows. See if they will swap your whole package for a new one.
-
Right in the middle to the day on Sept. 9 my iPhone 5 started getting "Cannot Get Mail" messages when trying to connect to my work mail server. This account has been running fine for the last year. However iCloud mail works and the exact same settings on my iPad and desktop are working without a glitch. I have tried closing, soft rebooting, powering off etc.
Hello there, Chris.
The following Knowledge Base article provides great recommendations for troubleshooting issues with Mail on your iOS device:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
hi, photoshop crashed and the file I was previously working in, on the same version of Photoshop says "Could not complete your request because the file is not compatible with this version of Photoshop." I'll appreciate any help. Thank you.
CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras -
Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.
Satellite L505D-S5983
I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
Then add things carefully, rebooting Windows and testing the USB and audio at each step.
Please note this.
The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
All of the latest drivers for your model are easily found here. This one is for the sound.
Realtek Audio Driver for Windows 7 (32/64)
-Jerry -
Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
PThanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated. -
I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?
I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update. -
Remote.app (version 2): Does it still work in iOS7 or will I be automatically updated to version 3?
That is basically the main question I've come to ask (with some side commentary in parenthesis below).
After trying out iTunes Remote App version 3, I saw that it scrambles playlists (such as Recently Purchased), which makes my playlists worthless. For example, using Remote.app, it's no longer possible to simply play the songs you bought over the last week at the iTunes Store using the Recenlhy Purchased Playlist. Since I buy a lot of music through the iTunes Store, I naturally want to listen to what I just paid for, just as I could using Remote.app version 2.
But it's not just the Recenly Purchased playlist, it's all my playlists. Through the last decade, day in and day out, I've carefully orgnized hundreds of playlists that I've very crafted, song by song like old mix tape casettes.
They payoff for this work has been enormous. Since starting with mp2 in 1995, then mp3 and continuing through to the thousands of dollars I've spent purchasing songs through the iTunes Store and tens of thousands on iPods, iPhones, iPads, and computers—I've been able to make music match whatever mood or music was juuust right for the moment, making for great moments and memories with friends and families. For some artists, I always want to hear their latest songs first or I want to to hear top rates songs first. Other lists are about creating a particular mood for just about any occasion. I can even shift the mood in the room with the right music list. It's really been fantastic the memories and moments I've been able to set the tone with the right song, and most of this has been not the song itself, but the flow of music I've created by orgnizing music lists. That's a lot of work I've invested. So the order of the songs matters a lot to me, especially the very first song that starts that list. That's the song I want to hear first, not somewhere in the middle.
As of Remote.app version 3, these carefully crafted songlists are scrambled, making the App worthless. When I first noticed this I couldn't believe it, must be a bug. Nope, no bug, by design I found out. It's like when Lucy pulls the football away. It's mean spirited to take back features you've sold and promoted and people have grown to rely on in the workflow of their lives. So I downgraded back to Remote.app version 2.
((Actually, they're not really technically scrambled, they're actually presented in alphabertical order, which I think is really the same thing to me. Think about it: listening to an artists work alphabetically by title is really the most random and completely scrambled way to listen to their music. Or if you don't want to listen to them alphabetically, you can have them shuffled. Those are now the only two choices. Either way, the lists are jumbled, and like iTunes 11, several of the most powerful features have been taken away. In this case the exact thing that's missing is that the iTunes Remote no longer reflects the sort order of iTunes playlists.
I don't know if this is a quiet, update-by-update shift away from our playlists and towards iTunes Radio or not, but I would think so. Why else would you make it less powerful. To quote Merlin Mann Apple tends to "fire a warning shot" feature wise before taking something away. The Finder has gotten less and less powerful in finding files and folders by their name and size through the last decade.
I'm now noticing the same thing with iTunes, it's becoming more difficult to find the currently playing song. In iTunes 10, Go to Current Song would open the folder containing the list of the currently playing song, highlight and move that list to the top of the left column and then highlight that song. In iTunes 11, Go to Current Song will only highlight the folder that contains that song and nothing more. At that point you're on your own to hunt town the currently playing song. This feature has been broken—on purpose I suspect.))
SO—I don't want to be forced into Remote.app version 3 and have my playlists scrambled on my iPhone and iPad. Is there anyone who knows the answer from first hand experience?
If customer loyalty is as important to Apple as it should be taking away features in iTunes and Remote app will only drive old customers away.
Thanks!!
DavidI like that I would be able to maintain my iPhoto library data for Faces and Places in Aperture, but am concerned that when the iPhoto library is "upgraded" for Aperture, and I decide I don't really need that program, the upgraded library won't work with iPhoto anymore.
The iPhoto library isn't changed in any way by Aperture. Aperture will import the Library and you can choose to copy the files to the Aperture Library or reference them within iPhoto. As long as you don't delete files from the iPhoto Library via Aperture (which you could do if you choose to Reference) there is no impact on iPhoto
Will I still be able to use iPhoto to access and organize my library, or will it be forever converted for use with Aperture?
They are completely different libraries.
Recently, iPhoto bugs make Events show up multiple times in iTunes when syncing for iPhone and iPad.
Fixed in the 9.1.3 update.
Will I find a better user experience with Aperture, or does it also use the single file library and suffer the same struggles iPhoto users have been seeing lately?
Like iphoto, Aperture can use the "single file library" or it can use a Referenced Library (just like iphoto can). Note that using a Referenced Library offers not a whit more in terms of features or capabilities. It's file storage plain and simple. Nothing more.
No you won't see the "same struggles iPhoto users have been seeing..." because Aperture is an entirely different allication.
But you my see Aperture or Lightroom struggles
Regards
TD -
11.3.300.265 installed and recognized.. but still told not right version??!
11.3.300.265 installed.. IE recognizes, Flash Recognizes it.. Crashes in IE and Firefox. and IE tells me I don't have the latest damn version. I need to stay on version 10 which works in order to use FF, but IE won't let me when I need to use IE for my work cloud system
When I go to the page where you see your current version, it shows me 11.3.300.265 installed in IE. Doesn't work in Firefox. However, when I attempt to load content with Flash in IE (thanks for killing my FF!!), IE in it's brilliant wisdom tells me I don't have the latest version, and sends me to the page to download the same version that the "about Flash" displays.
To top it off, When I tried to troubleshoot the FF issue by changing protected mode (see? I'm not stupid, following the damn guides), I'm told that I don't have Flash installed at all, then sent to the about page, where it shows me I have 11.3.300.265 installed.
I have rolled back to version 10 THREE times now! and IE still forces me to download the peice of crap version 11.3.300.265 installed.
I am normally a fairly calm person, who doesn't make posts like this but I am FED UP! Please.. help me.Sorry, I do not quite understand what you want...
IE doesn't care if you have Flash Player installed, or what version you have installed.
If you want to install version 10, you must uninstall any later version first. You can obtain the latest 10.x version from http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
[topic moved to Flash Player forum]
Maybe you are looking for
-
My iphone uses old apple id that no longer works
I am having a problem with my iphone wanting to use my old apple id email. I changed the email to a different one doe to a security breach from a hacker and now the phone still wants to use my old id for icloud
-
BI Report Variable Screen not working with I.E-7
Hi Gurus, I recently installed Internet Explorer 7. Iam not able to execute BI Web reports. When I try to drilldown on the selection screen variables of the report. It gives me the below error. Is anyone encountering the same issue; "This application
-
'is between' used in Dashboard Prompt
I have two columns used in the Dashboard prompt: 1. Department Description: Based on Department ID (In the BMM Layer, the descriptor column is Department ID) 2. Employee Name: Based on Employee ID (In the BMM Layer, the descriptor column is Employee
-
Blurry PDFs, appearing corrupted
I've recently started noticing that PDFs on a few sites are appearing corrupted, with all the text blurred in a big mess of lines. I'd assumed it was because the sites I was downloading them from were broken or they were getting corrupted somehow in
-
Can I use Acrobat Standard to create an auto open file? I'm running it in Parallels on a Mac.