Php connection error "unable to retrieve operations or entities from the file"
Hey,
I get the following error when i connect the php service in Flash Builder 4.
how can i fix it? thanks!
The Zend Framework is installed correctly and working fine.
But it is not able to find Mail.php file or Mail class in the Main.php file (verify these, remember the names are case sensitive).
If it does not help, try reimporting the file again.
Also, can you attach the Mail.php file instead of test.php file, which is failing.
Remember that the file name has to be same as the contained class name.
Similar Messages
-
AAE - Error - Unable to retrieve MappingInterfaceLocalHome from JNDI while
Hi Friends,
We have an interface which runs in AAE. (Advanced Adapter Engine, PI 7.1, EHP1)
Sender is SOAP, Async Call.
We have used the condition to determine receiver. One Receiver is SOAP (by remove proxy) and another one receiver is RFC.
When we check the messages, in message monitoring, database overview, those are failed with error "
Unable to retrieve MappingInterfaceLocalHome from JNDI while invoking the mapping"
Detailed error is as below:
Execution of mapping "http:/bigbiz.com/xi/MDM/IM_MATERIALUPDATE" failed. Reason: MappingException: Unable to retrieve MappingInterfaceLocalHome from JNDI while invoking the mapping, NamingException: Exception during lookup operation of object with name localejbs/MappingBean, cannot resolve object reference., javax.naming.NamingException: Error occurs while the EJB Object Factory trying to resolve JNDI reference Reference Class Name: Type: clientAppName Content: sap.com/com.sap.xi.services Type: interfaceType Content: local Type: ejb-link Content: MappingBean Type: jndi-name Content: MappingBean Type: local-home Content: com.sap.aii.ibrun.sbeans.mapping.MappingAccessLocalHome Type: local Content: com.sap.aii.ibrun.sbeans.mapping.MappingAccessLocal com.sap.engine.services.ejb3.runtime.impl.refmatcher.EJBResolvingException: Cannot start applicationsap.com/com.sap.xi.services; nested exception is: java.rmi.RemoteException: [ERROR CODE DPL.DS.6125] Error occurred while starting application locally and wait.; nested exception is: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5106] The application .....
I confuse why suddenly this error comes, since it was working fine earlier. The message status is now 'To Be Delivered'.
Can you kindly clarify friends how to fix this ?
Kind regards,
Jegathees P.Hi,
PI 7.1 Ehp1 receiver determination can be done conditionally by selecting operation specific...
I don't think this error is related to AAE ...looks like this error is related to server ...
check other mappings also whether they are executed with out any error ?
this is related to module lookup error...need to check with the basis
HTH
Rajesh -
Hi Experts,
When I use Agent functionality to send email in BIEE 11.1.1.7.0, it will generate the following error message as below: Are you facing the same problem ? Please help me,Thanks very much.
Global Error: [nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.
Error Codes: AXSBMN8D:
The operation completed successfully.Can you try doing telnet to SMTP server from where BI server is installed and let us know the outcome.Just want to check if any firewall is blocking
telnet hostname portnumber
Thanks, -
Hi,
I appollogize if this post is off topic. I have problem wiht publish WebApp MVC.
I have website (MVC) with one Web reference. Build and run in VS working. But when I tried to publish to disk I get error:
SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
I have VS2013 Profesional with all updates and Windows 8.1.
If I remove web reference then publishing working. Where can be a problem? Thanks.@Marek Bober,
Thanks for sharing the solution back to here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error :Unable to retrieve data from iHTML servlet for Request2 request
I open bqyfile to use HTML in workspace.
When I export report to excel in IR report.
Then I press "back" button I get error"Unable to retrieve data from iHTML servlet for Request2 request "
And I can not open any bqyfiles in workspace.
Anybody gat the same question? Thanks~Hi,
This link will be helpful, the changes is made in the TCP/IP parameter in the registry editor of Windwos machine. I tried the 32 bit setting for my 64 bit machine (DWORD..) and it worked fine for me..
http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
Hope this helps.. -
Conflict Resolver Sync Error - Unable to retrieve conflict information from the sync server
So I have been using iTunes with my iPhone 3GS and now my iPhone 4 to sync with my Outlook for many years now and it has been flawless.
I recently bought a new iPad and started syncing it as well.
Now as of late, after every 2 or 3 syncs, I get an error from iTunes displaying the Conflict Resolver and it says there are 42 sync conflicts.
When I try use the Review Now button it shows up and the issues are between my iPhone and Outlook and are only related to contacts.
As soon as I try to choose which record to resolve, the window immediately disappears without giving me a chance to finish and I get another dialog window with the error:
Unable to retrieve conflict information from the sync server.
Please try again the next time the conflict resolver window is presented.
When I try to sync again it seems to be fine. But then after I sync my iPad and theny iPhone again it shows up and it still won't let me resolve the conflicts.
I have tried the following:
1) Rest Sync History on all devices
2) I have had iTunes replace all the contacts on the iPad from iTunes
3) I have changed the conflict resolver to only notify when 50% of the data will be changed
I have had no such luck.
If I add a contact to Outlook or to my iPhone and then sync it seems to be syncing the new addtions correctly. However, I cannot get this issue with this 42 conflicts resolved for some reason. This has been going on for a month now.Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali -
CVU ERROR:Unable to retrieve database release version
Hi all, I want to install RAC on three nodes,but when I run "cluvfy" as ORACLE user, I got errors:
./runcluvfy.sh stage -pre crsinst -n nrac1,nrac2,nrac3 -verbose
ERROR:
Unable to retrieve database release version.
Verification cannot proceed.
but the ROOT user can run it with few errors , why?
how can I do ?I was getting this same mysterious error immediately after a successful CRS install. The command I was running was "runcluvfy.sh stage -pre dbinst -n node1" from my stage directory. All previous executions worked correctly. My thought now is that the CRS install added JRE files that interrupt its paths; still not sure though.
The MetaLink article referenced above was very helpful in the end but only after I paid special attention to the wording at the very bottom. Originally, I dismissed the article because it is primarily for Solaris; while we are using Red Hat AS 4 update 5. However, in the very last sentence it states the following:
"Note: If you encounter same error for cluvfy stage -pre crsinst -n node on Linux x86-64 platform before CRS installation, please check if jdk 1.5 is installed. cluvfy works with jdk 1.4. Please install jdk 1.4 or install CRS and run cluvfy from CRS installation."
Ah, we had also installed JSE 6. And sure enough executing 'java -version' showed that it was picking up the path to JSE 6 not the 1.4.
So, following the note in the above article, I did two things. First, I changed the CV_HOME variable to $ORACLE_HOME/bin and ran 'which cluvfy' to verify the correct location. Second, I executed "cluvfy.sh stage -pre dbinst -n node1". It worked! -
while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I get the error "unable to load data class info from sync services" and eventully itunes freezes. will this article help me?
Hello there brigidfromca.
Messages can always be pretty daunting when we're not sure where to start. I was able to locate the following Knowledge Base article that discusses the very message you're getting:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
It is a pretty thorough document with multiple steps to review, but looks to be great place to start for a resolution for you.
Thanks for using Apple Support Communities to reach out to us for answers.
Cheers,
Pedro D. -
Error.Unable to use mx:CustomDateTimeAxis to implement the component.
Hello.
I have a modified class DateTimeAxis to show data labels in my own format:
package
import mx.charts.DateTimeAxis;
public class CustomDateTimeAxis extends mx.charts.DateTimeAxis
public function CustomDateTimeAxis()
super();
override protected function formatDays(d:Date, previousValue:Date, axis:DateTimeAxis):String
return d["date"];
In main application:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:horizontalAxis>
<mx:CustomDateTimeAxis id="xAxis" dataUnits="days" parseFunction="myParseFunction"/>
</mx:horizontalAxis>
The compiler produces an error:
"Unable to use <mx:CustomDateTimeAxis> to implement the component."
Can you help me. Thank you.The issue is very clear: you are using the wrong XML namespace to add your component. The mx namespace is defined for the Flex SDK, so unless you have a custom build of it then your component isn't in there.
http://livedocs.adobe.com/flex/3/html/help.html?content=intro_3.html -
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
iTunes has tried to update itself and runs into an error and tells me to manually install. When I d/l and run the iTunesSetup.exe file I always encounter the following error message...
"A network error occured while attempting to read from the file C;|Windows|Installer|iTunes.msi" and iTunes does not update to iTunes 10.4.1.
Anyone know what is creating this error message? Thanks for the help...(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I just started a free trial of the Adobe XI product that allows me to create an editable PDF. I'm done creating the form and ready to export it. When I click Export PDF from the File menu, it says Adobe encountered an unexpected error. What am I doing wrong?
Good to know — there is no such application as "Adobe XI".
"Adobe" is the name of the company.
"XI" is indicative of the use of either Acrobat XI or Reader XI.
Neither Acrobat XI Pro (for which Adobe provides a free, fully functional 30-day trial) nor Adobe Reader XI (the free to download and use PDF viewer that Adobe provides) have an "Export PDF" entry under "File".
"Export PDF" only is present in Adobe Reader XI over on the right on the "Tools" panel.
The "Tools" panel provides a way for a user of Adobe Reader XI to connect to various By Subscription online services (gotta pay eh).
Export PDF is one of these. A subscription lets you send a PDF file to the online internet service (aka "cloud" service). The service then exports to a supported file format (Word / Excel / ...) and the user selects / directs where the output file is to be saved on the user's local machine.
Of course to use any of the online subscription services one must have an active (paid up in full) subscription to the service.
So ---- As described the puzzle pieces don't fit eh.
What specific Adobe (the company) applications are you using?
Acrobat XI Pro? Adobe Reader XI? Both?
Be well.... -
what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"
It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian -
My 12" powerbook logics card crashed. I have a 17". How do I retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"? Where on the 12" hard drive do I go to search for them?
If the 12's logic board is trashed, I don't think you can get into FireWire Target Disk Mode. The computer has to start to get to FWTDM. Will it starte and run at all?
If it won;t start, you will have to go inside and extract the hard drive. Then get this gadget:
Newer Technology Universal Drive Adapter USB 3.0/2.0 - connects any 2.5", 3.5" or 5.25" drive
It allows you to connect a bare drive to another computer that has USB. It will act just like an external disk drive. Assuming the 12's drive is not damaged due to the LB failure, you can retrieve files quickly.
Maybe you are looking for
-
Getting double intercompany invoice from one STO orders
Have you already implemented the following flows and if yes how ? I would like to build an intercompany STO between company A plant 1 and company B plant but with a 3rd company C responsible of the order, That means that i would like to get 2 interco
-
Mac renaming automatically issue
Bonjour, since the yosemite update my Mac Book Pro has a few issues: 1- The mac name is changing automatically, even when I force the name again in the setup after a while the computer is automatically renamed. A number is added at the end of the nam
-
Saving a slideshow without exporting?
Is this possible? I want to do a few different slideshows, but I can't seem to find a way to save them without exporting. This is a pain because every time I want to make a change, I have to start over and re-export. Surely I am just missing somethin
-
The Monitor for my t61 is not working... It seems to freeze up and show a grey screen at sometimes. The Monitor would react to tapping The side of It. This is what my Monitor looks like sometimes
-
My iPhone 4s screen is blue, what's wrong?
HI, about two weeks ago, I dropped my iPhone and the screen went black with blue vertical Stripes, within these two weeks, I have hoped something would change, but it is exactly the same. Please note that I have tried to reset it, and no change, I am