PHP errors not displaying

While editing my web page i noticed that when i have a PHP error on the site, firefox simply does not attempt to open the page. Like, if im on yahoo, and type in the pages URL, it will start loading it then stop and stay on yahoo (for example). Ive loaded firefox via another user profile and tried it in chrome as well and the error displays as wanted. Ive turned off all addons and extensions in my default user profile and still get the same issue.
I know that simply creating a new user profile will fix the issue, however i have a LOT of saved passwords, bookmarks, ect that id rather not start over with. Anyone have any ideas of an option that blocks this?

OK, I got it to work.
I went to Help->Troubleshooting Information.
In the upper right corner, I clicked the Reset Firefox button.
When it came back up, the PHP error messages were finally being displayed from my test file. Some of the options (tab and toolbar settings, etc) were set back to defaults, but all my bookmarks were intact. Not sure about passwords and history, but I'd guess it's OK.
Good luck.

Similar Messages

Error not displaying while Invoice Apprvoal in detail tab

Hi,
Here is the problem we are facing. We are at SRM 5.0 with Extended Classic and no IMS configured.
u2022 Activity u2013
1. Invoice with value more than PO value is posted and triggered for approval. Zero Tolerance maintained.
2. Posted Invoice has status u2013 u2018To Be Corrected Manuallyu2019.
3. Work Item triggered for approval and is in Approver's inbox.
4. Approver approves the Invoice.
u2022 Expected Result u2013 If Approver tries to approve the Invoice then he/she should get error message u2018Document Contains Errors Approval Not Possibleu2019.
u2022 Actual System Behavioru2013
1. If approver tries to approve the Invoice at header level then error message u2018Document Contains Errors -
>Approval Not Possibleu2019 is getting populated. But we have deactivated the approval/rejection button at the header level.
2. Approver is opening up the invoice document and then approves the Invoice. At that time, error message mentioned in point 1 is not getting populated. Instead the message appears as u2018The Invoice Approvedu2019. This is a false indication to approver and work item remains in Approveru2019s queue.
Any solution to resolve this issue?

Hi AP,
Same approver when approves the Invoice at header level, error msg displayed properly. But if he tries to appove the invoice in detailed view - clicking on SAVE - then the error msg is not displayed and instead it shows Invoice Approved and workitem remains in his work list.
Is this because of Autho issue? In that case what autho objects we need to check?
My wild guess about this issue could be because system is not checking if the Doc is complete or not to trigger the respective message. Any thoughts?
Thanks.

SQL error not displayed. Instead wwv_flow.accept was not found

Hi,
My Question:
Why does the SQL error in this case not get propagated up the chain?
BACKGOUND:
Just spent a few hours trying to figure out why when trying to insert into a table using a wizard created page I was getting the error: The requested URL /pls/htmldb/wwv_flow.accept was not found on this server. It turns out that the error message is a red herring, and the problem was caused by a SQL error that I thought should have been caught and displayed.
When running the page under debug, the error is displayed, but run as Joe Blow user, the www_flow.accept error is received.
DETAILS
Process details where the insert takes place:</h3>
Process point:
After Submit - after computations and validations
Process Messaging
Process Error Message
Unable to insert a row to TRAINING_SESSIONS
HTML DB ERROR (NOT IN DEBUG MODE)
This is the error the end user sees in the browser:
The requested URL /pls/htmldb/wwv_flow.accept was not found on this server
APACHE ERROR_LOG
[Sun Jun 06 17:50:28 2004] [error] [client 127.0.0.1] [ecid: 1086508225:10.6.6.6:1724:1732:320,0] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404 ORA-03113: end-of-file on communication channel
[Sun Jun 06 17:50:28 2004] [alert] [client 127.0.0.1] [ecid: 1086508225:10.6.6.6:1724:1732:320,0] mod_plsql: Unable to reset state for mode 0: Err 3114 url=>/pls/htmldb/wwv_flow.accept
HTMLDB DEBUG MODE OUTPUT
This is what you see when running the page as developer with debug on:
0.01: Processing point: AFTER_SUBMIT
0.01: ...PLSQL (AFTER_SUBMIT)
INSERT INTO "TRAINING_SESSIONS" ("TRNG_ID",
"COURSE_ID",
"START_DATE",
"LOCATION",
"COST")
VALUES ( TRNG_SEQ.NEXTVAL,
:P27_COURSE_ID,
:P27_START_DATE,
:P27_LOCATION
:P27_COST)
0.01: Show ERROR page...
0.04: Processing point: AFTER_ERROR_HEADER Home
Error Unable to insert a row to TRAINING_SESSIONS
OK
0.06: Processing point: BEFORE_ERROR_FOOTER
ORA-06550: line 6, column 9: PL/SQL: ORA-00947: not enough values ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
ACTUAL PROBLEM:
The sequence TRNG_SEQ does not exist!

Has anyone found what causes this problem? I am running HTMLDB 1.6
I have a HTMLDB application running against four databases. I develop in one and export and import the application to all databases. It appears that on the databases that are NOT development, this www_flow.accept was not found comes up instead of the error page.
Please help! We are getting so close to wanting to release this application.

Preflight errors not displaying

Hi there,
My preflight errors are not displaying - I'm using CS4. At the bottom of the screen I can see that there are errors in my documents but nothing displays in the Preflight window - it used to, but hasn't worked for a couple of weeks now. All suggestions welcome. Thanks

Replace Your Preferences

Lccs.swc error: Not displaying any rtc collaboration GUI components

I'm using flex builder 4.6 for the first time and my intention is to try out a sample video conferencing application. I've succesfully made a connection to the lccs room console but I have not been able to display any components on the default state (There are two states, the login state and the default state). While the login state shows the login field (created using spark components) the default state shows nothing but a blank window (these are supposed to initiate video chat through a webcam and are created using rtc components). No matter what I do nothing is displayed on this window and I have tried running this app on the web, mobile and desktop to no avail. The only error that appears is this (wrt the design view):
C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse\plugins\com.adobe.lccs\libs\player10.3\lccs.swc- not respondingSWC file failed to load. Any component dependent on this SWC file will not be displayed in the Design Mode.The SWC may have failed to load because of:
* Incompatible definitions caused by usage of a different SDK version
* Missing referred class definitions
I'm running adobe flash player 11.1 and the latest version of air. I tried installing flash player 10.3 but that didn't help any. I don't understand why all the tutorials online seem to list this as a sample easy flex application meanwhile no one in any forums have encountered this situation. Is lccs.swc currently deprecated or something? Does this have anything to do with a departure from flash or flex development for adobe? None of the online tutorials have been updated to reflect flex builder 4.6 development (the videos on the lccs page are for flex builder 3 or at the most 4). Is there a lccs.swc plugin currently available for 11.1?
Unless I'm doing something wrong, but following the tutorials verbatim does not seem to indicate otherwise..please help!!!
here's my code:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:rtc="http://ns.adobe.com/rtc" currentState="logon" fontSize="18" xmlns:authentication="com.adobe.rtc.authentication.*">
    <fx:Script>
        [Bindable] private var roomURL:String = "https://collaboration.adobelivecycle.com/eguaoje/myfirstroom";
        protected function connect():void {
            auth.userName = userName.text;
            currentState = "default";
            session.login();
    </fx:Script>
    <s:states>
        <s:State name="logon"/>
        <s:State name="default"/>
    </s:states>
    <fx:Declarations>
        <authentication:AdobeHSAuthenticator id="auth"/>
    </fx:Declarations>
    <s:TextInput id="userName" includeIn="logon" top="200" horizontalCenter="0"/>
    <s:Button label="Connect" click="connect()" includeIn="logon" top="250" horizontalCenter="0" height="50" width="150"/>
    <rtc:ConnectSessionContainer id="session" roomURL="{roomURL}" authenticator="{auth}" autoLogin="false" width="100%" height="100%" includeIn="default">
        <rtc:WebCamera top="10" left="10" bottom="10" right="10"/>
    </rtc:ConnectSessionContainer>
</s:WindowedApplication>

I just tried using flex builder sdk 4.5.1 but the problem remains. It seems i'll have to somehow revert to sdk 4.0 or 4.1 (the most consistent one in the examples) to resolve the issue. However using it with flex builder 4.6 seems to bring a lot of errors at runtime. Do you know how I can get 4.0 sdk working with flexbuilder 4.6 or with eclipse? Is design mode broken with 4.0?

Finder 600 error/not displaying files

Finder giving me a 600 error, if it opens it won't display files, especially those on a network hard drive. It will let me see most folders though, again, if I can get past the 600 error. iTunes stopped working for a while but the second I clicked into these forums it worked!
I've seen some similar threads but they didn't fix my issue. FYI I'm running the latest OS.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Error not displayed in TCode CAT2

Hi,
We have created a new data profile wherein we have added an extra column for receiving order. The scenario is as described below:
IN TCode CAT2, when we enter value in the receiving order coulmn along with values in the other columns for Activity type, Receiving sales order, Receiving Item and enter time on Monday as 10:00 to 11:00 and in the next row, add the same details, except I enter time on Monday (same day as previous row) 10:00 to 13:00, the system does not throw a time coliision error (which is not correct).
In the same data profile, if I dont enter any value in the receiving order columns but enter values in all the other columns mentioned above, and enter the time as mentioned above, it gives me a time collision error (this is correct)
What should I do so that the system gives the time collision error when I have values in the receiving order field (along with values in the other fields for this scenario as described above with the day and times)?
Please help as I am totally new to SAP HR.
Thanks in advance.
Mick

Hi,
One correction to my earlier post is that if I dont enter any value in the receiving order column but enter values in Activity type, Receiving sales order, Receiving Item, overhead columns (also a new column added via some other data profile) along with the time on Monday as mentioned above (1st row 10:00 to 11:00 and 2nd row 10:00 to 13:00), the system throws an error for time collision, which is correct.
How do I ensure that when values are entered in the receiving order column with the time entered the same as above on Monday, the system will throw an error?
Please help as this is critical.
Mick

JDev11.1.1.4 IDE error: not displaying view link in service's Data Model

Greetings,
I was trying to update master-detail relationship in the Data Model tab of the Service definition tab.
Got an 'unexpected error happened' and Jdeveloper shut down.
After I re-opened it, I do not see my adf view links under the packages in the Available View Objects multiselect in the Data Model tab of the visual editor for service definition file.
Also there was an uncaught exception thrown:
'Performing action Clean All [ from oracle.ide.......CodeEditor]
Performing action Optn ... [ from from oracle.ide.......CodeEditor]
Uncaught Exception
IllligalArgumentException: component not found in tabbed pane......
Also in the message log:
Business Components: Load error.
Any help is appreciated.
Thanks,

Click on the Proxy Service in your ALSB project to go to Proxy Service Configuration page. On this page, you will see an endpoint URI, something like /myservice. To get the wsdl in browser, use the URL like http://mymachine:7001/myservice?wsdl

OD with errors, not displaying my users

Yesterday the OD Slave was having issues and now today the Master OD is having the same issues.
When launching Workgroup Manager I get this error message (which isn't well documented here on the interwebs):
"Error of type eDSOperationFailed (-14483) on line 3395 of /SourceCache/WorkgroupManager/WorkgroupManager-361.3.1/PMMUGMainView.mm"
I try to follow the path in the error message and there is no /SourceCache directory that I can find.
Console Messages is giving me this group of error messages over and over every couple of seconds.
9/1/11 12:18:55 PM          com.apple.metadata.mds[68]          XSANFS_FSCTL_SpotlightRPC fsctl failed (errno = 45)ERROR: _MDSChannelInitForXsan: _XsanCreateMDSChannel failed: 45
9/1/11 12:18:55 PM          com.apple.metadata.mds[68]          ERROR: _MDSChannelXsanFetchAccessTokenForUID: dead channel
9/1/11 12:18:55 PM          mds[68]          (Error) Message: MDSChannel RPC failure (fetchPropertiesForContext:) [no channelAccessToken]
9/1/11 12:18:55 PM          mds[68]          (Error) Store: <MDSDistantStore 0x102905760 shutdown:NO got shutdown notification:NO>{channel:0x102904bf0 localPath:'/Volumes/Media'} bring up failed -- will retry
2 days ago we had a network switch failure that I am wondering could be the root cause, but I don't have any clue.
If anyone knows what is going on with my system your insight would be greatly appreciated.

I have just come across this error as well
"Error of type eDSOperationFailed (-14483) on line 3395 of /SourceCache/WorkgroupManager/WorkgroupManager-361.3.1/PMMUGMainView.mm"
Funnily enough though WGM works fine if I lauch it imediately after boot. Seems that if server admin is launched before WGM the issue occurs...
This has literally just begun so sorry for no technical input yet as I have jsut begun troubleshooting myself, have you managed to discover anything since first coming across the problem?

Expression errors not displaying

When I write an After Effects expression that doesn't work for some reason, a dialogue box is suppoed to appear telling me what the error is. Since upgrading to 5.5, that dialogue is gone -- my expression just gets a yellow warning sign beside it with no indication as to what's wrong. Has anyone run into this before? Should I just trash my prefs?

What errors are you triggering specifically? Also, what's your graphics setup? I'm aware of a specific graphics drawing error (since I also reported it), that will cause this kind of empty panel and the engineer I talked to pinned it on specific graphics cards/ configurations. It's still under investigation, though, so beyond "try a different driver or configuration" I cannot offer any specific guidance.
Mylenium

Bi Dashboards issue works properly some times and after not display pointers data and give un expected error and throw login window

HI,
I have toff situation where we deployed bi dashboards in our site and it works some time and some times not,
and some times it keep loading and throw a login window.
works when
we restart performance point service and if not work
we re create secure store service and generated new key and create new pps service application
before that we stopped secure store and pps service using c.a in application server
we are using ssas for datasource to connect from dashboard designer
we have seperate server for ssas dbs
seperate application server running: pps service and secure store service
two web front ends: one of running secure store
1 Domain controller + central admin service running
some times after 4 -5 hours bi dashboards works , we dashboards not display data and throw un expected errors,
also when we try to connect using a dashboard designer from a seperate client machine in same domain ,we have same issue , we unable to connect to ssas datasource server, and if connect some times unable to deploy dashboards.
we tried every thin icreased server time out values in ssas server
:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config\msmdsrv.ini. in this location
and in
c:\program files\common files\microsoft shared\web server extensions\14\webclients\ppsmonitoringServer\client.config
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647" />
even we have same issue
is some thing happening when dashboards working some time and after some time not
is a secure store crashing or its still request pending in IIS and not authenticating to data soruce why
below are the logs
Here are the results of the log analysis :
server wfe1
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services 39 Critical A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application
is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services ef8z Critical ‏‏حدث
استثناء
أثناء عرض
عنصر ويب.
قد تساعد
معلومات التشخيص
التالية في
تحديد سبب
هذه المشكلة: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. ‏‏رمز
خطأ "خدمات PerformancePoint"
هو 20700. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C SharePoint Foundation Runtime ba3q Medium Redirect to error.aspx?ErrorText=Request%20timed%20out%2E failed. Exception: System.Web.HttpException: The remote host closed the connection. The error code is 0x800704CD.
at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect)     at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush()     at System.Web.HttpResponse.Flush(Boolean finalFlush)
at System.Web.HttpResponse.End()     at Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryString) 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:47:32.69 w3wp.exe (0x2128) 0x2154 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 78c107cd-0d4b-46f5-8e1a-0d9b4ebc7b29
09/01/2014 15:07:40.74 w3wp.exe (0x2128) 0x209C PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/28_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) abf0263d-7333-4e4f-9cd4-a3a4dcb700c0
09/01/2014 15:13:25.92 w3wp.exe (0x2128) 0x18DC PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/218_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) b35bf864-54f4-43fa-88a8-44cdf938bfa2
09/01/2014 15:11:10.87 w3wp.exe (0x2128) 0x1F88 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Courts/Bic/Lists/PerformancePoint Content/4_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 7cea0eb6-214f-4d7b-a6e7-97a0fe11c956
09/01/2014 15:11:40.87 w3wp.exe (0x2128) 0x2150 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/162_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 4154222b-6ff0-4b64-81b8-d08501a19278
server wfe 2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
In the Roiscan logs we get an error in regards to the English Language pack:
Review Items
============
Error:                       Product {90140000-1015-0409-1000-0000000FF1CE} - Microsoft SharePoint Foundation 2010 1033 Lang Pack: has unexpected
file state(s).
adil

chinnijagadeesh,
You suck!
Signed: The rest of the universe.
... and quit crossposting FFS... it really is quite annoying!

Error message not displayed in a pop up

Hi ,
I have a pop up screen in my web dynpro with a input field and two buttons.
i have a error message written in the WDDOBEFOREACTION method of my pop up window. But the message is not displayed on the window. But If the same is written in the event handler of the button click it is triggered.
Please help me to display the message with the code in WDDOBEFOREACTION method .
The code is as below
lo_nd_bp_data = wd_context->get_child_node( name = wd_this->wdctx_bp_data ).
* get element via lead selection
lo_el_bp_data = lo_nd_bp_data->get_element( ).
* get single attribute
lo_el_bp_data->get_attribute(
    EXPORTING
      name = `BP_NUMBER`
    IMPORTING
      value = lv_bp_number ).
CHECK lv_bp_number IS NOT INITIAL.
IF zcl_rms_webdynpro_texts=>check_for_victim_bp( i_bp_number = lv_bp_number ) = abap_true.
* get message manager
    DATA lo_api_controller     TYPE REF TO if_wd_controller.
    DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
    DATA: lv_p1 LIKE syst-msgv1.
    lo_api_controller ?= wd_this->wd_get_api( ).
    CALL METHOD lo_api_controller->get_message_manager
      RECEIVING
        message_manager = lo_message_manager.
    lv_p1 = lv_bp_number.
* report message
    CALL METHOD lo_message_manager->report_t100_message
      EXPORTING
        msgid                     = ZMSG_CLS
        msgno                     = '222'
        msgty                     = 'E'
        p1                        = lv_p1
        cancel_navigation         = abap_true
        enable_message_navigation = abap_true.
ENDIF.
Edited by: SAP LEARNER on Jan 5, 2012 1:37 PM

have a error message written in the WDDOBEFOREACTION method of my pop up window. But the message is not displayed on the window. But If the same is written in the event handler of the button click it is triggered.
strange..
wddobeforeaction will trigger then event handler wil trigger then wddoafteraction will trigger.
Did you put a break point in wddobeforeaction?
Regards
Srinivas

Error message is not displayed

Hi all,
I am working on Tomcat server and JSP. i have created a web page using JSP and html. when i click on submit button, it should display the next page. if any error is there, it should display the error on the webpage. But, it is not displaying any error message.
It just says :
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Open the localhost:8080 home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer
i tried using one undeclared variable and try to navigate to next page, even then there was no error message like "variable not found".......it just gives the error message as above............
I am not able to makeout where i am going wrong, what is the problem.....
I am finding it very difficult to debug.
please help !!
regards
ashvini

.....what is jsp url ?
orginal post of yours...
when i click on submit button........
which means that in your first page, you have a form with an action attribute that points to a jsp - that's what i meant by submit jsp url.
and where can i find <tomcat_root>/log file ???Go to your TOMCAT installation directory, there would be a logs folder under that which in turn would contain your log files.
ram.

Error Message is not displayed on the pop screen for chain end chain

Hi,
I have called a screen in one of the standard program using enhancmenets,
and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
regards
afzal

Hi,
have you tried option "LIKE" with instruction MESSAGE.
Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
And instead of using a MESSAGE instruction, why to not use a popup ?
Like using one of these function modules (for instance):
TMS_BCU_POPUP_TO_CONFIRM
POPUP_TO_CONFIRM_STEP
POPUP_TO_DECIDE
FC_POPUP_ERR_WARN_MESSAGE
etc...
If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
Regards
Mickael

Error raised using 'CRM_MESSAGE_COLLECT' not displayed in Web UI

Hello,
I have implemented the badi CRM_ORDERADM_H_BADI and based on certain conditions i raise an exception and display the error message using function module 'CRM_MESSAGE_COLLECT'. The application log is populated with the error message and I am able to see the error message in SAP GUI . However when the same transaction is triggered via WebUI , even thought the exception is raised , the error message is not displayed.
I know i can use the method ADD_MESSAGE of the class CL_CRM_GENIL_GLOBAL_MESS_CONT if i want the error message to be displayed in Web UI .
However I want the message to be displayed either if the transaction is run from the SAP GUI or web UI .
Have anyone come across the similar situation , is there something I am missing.
Thanks & Regards ,
Sriram.

Hello Arun ,
I got the solution . The error message was raised properly . The problem is message filter at every view or viewset of a component is actually switched off by default.With standard components the filter gets activated at runtime if the component controller contains a BOL entity.
In our case , since it was a custom component with no BOL entity the filter was switched off and hence the messages from the application level were not read.
Therefore we redefined the filter method IF_BSP_WD_STATE_CONTEXT~GET_MESSAGE_FILTER at the view/viewset level and turned on the filter by default.hence even if the component does not return an entity the message filter gets activated.
Thanks for your inputs.
Thanks & Regards,
Sriram

PHP errors not displaying

Similar Messages

Maybe you are looking for