.php files are not being opened within Mozilla FF

Well, I'm learning PHP, and, although a file whose code is illustrated at www.w3schools.com, is being displayed within Adobe Dreamweaver, it does not seem possible to open the same file within the browsers installed on my pc, including Mozilla FF. It seems that this problem was noted by other people in the past however, I came across no solution.
'''index.php'''
''<html>
<body>
<?php
echo addcslashes("failure","|");
?>
</body>
</html>''
PHP 5 is installed on my Win XP 5 laptop. Any ideas please?

Sorry I think the problem is simply that Adobe Dreamweaver is the default .php file viewer.

Similar Messages

Since going to version 5 on XP Pro WMV files are not being opened, nor downloaded!

I can not open nor save WMV or MPG files. What's happened?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

WHAT FILES AREN'T BEING SAVED? WHAT FILES ARE SAVED?

JavaScript files are not being updated while updating managed solution over Dynamics CRM Online

Hi Support,
While I am updating a managed solution over Dynamics CRM 2013 Online, JavaScript files are not being updated and is showing the source as of the last version of the managed solution.
I tried the same versions of solution on my CRM 2013 on-premise install (test organization) and it updated successfully.
This is a bit urgent issue. Please suggest how to resolve this.
Online version of the CRM is
Microsoft Dynamics® CRM Online Spring '14
(6.1.1.1855) (DB 6.1.1.1847)
blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk

Our technical team managed to find the immediate cause for the problem, and a solution.
According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
Where <APPLICATION> is the name of the problematic cube.
After that everything is working.

Images and .properties(bunldes) files are not being found from my JSPs

Hi,
I have created .ear file by using ANT Application. And deployed into Oracle9iAS(OC4J). Here problem is that images and .properties(internationalization bundles)files are not found from JSPs.
Here is my directory structure.
public_html--->locale -->BusinessEntity -->businessentity_en_US.properties
--->enterprise -->images -->knowldege.jpg
--->BusinessEntity-->BEAdd.jsp
in my jsp bundle(.properties)file is accessed like this:-
<i18n:bundle baseName="/locale/-->BusinessEntity/businessentity" id="businessentity" locale="<%= locale %>" />
in my jsp images accessed like this:-
src="/enterprise/images/knowldege.jpg".
In my working environment, without creating .ear file, images and .properties files are being found my JSPs. But if i create .ear file and after deploy, images and .properties files are not being found my JSPs.
please let me know where i might did wrong
thanks in advance
srinivas

Hi i am again. Here is my configuration files(server.xml and default-web-site.xml)
server.xml :-
<?xml version="1.0"?>
<!DOCTYPE application-server PUBLIC "-//Evermind//DTD Orion Application-server//EN" "http://xmlns.oracle.com/ias/dtds/application-server.dtd">
<application-server application-directory="../applications"
deployment-directory="../application-deployments"
>
     <library path="../tools.jar" />
     <rmi-config path="./rmi.xml" />
     <jms-config path="./jms.xml" />
     <log>
          <file path="../log/server.log" />
     </log>
     <transaction-config timeout="30000" />
     <global-application name="default" path="application.xml" />
     <application name="nalluri" path="../applications/trainiumear.ear" auto-start="true" />
     <global-web-app-config path="global-web-application.xml" />
     <web-site path="./default-web-site.xml" />
     <cluster id="-1640090707" />
</application-server>
default-web-site.xml:-
<?xml version="1.0"?>
<!DOCTYPE web-site PUBLIC "Orion Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">
<web-site port="8888" display-name="Default Oracle9iAS Containers for J2EE Web Site">
     <default-web-app application="nalluri" name="Commonwar" />
     <access-log path="../log/default-web-access.log" />
</web-site>
thanks in advance
wating for reply
srinivas

Why my iPad 2 crashes after iOS 7? My apps are not being opened and my devices keeps on crashing.

My iPad 2 crashes every time after I installed iOS 7. It just got crashed 10 times while posting this question. Any of my apps is not being opened and it shows black blank page after I try to open. And system has also become slower. I don't find any way to stop my device from crashing every now and then. iOS 7 is just not working I guess. Please help me to find the solution of CRASHING every time.

Hey Akshit Gandhi,
Thanks for the question. I understand that you are experiencing issues with your iPad 2. To completely isolate these issues, it may be best to backup your device and restore as new:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
Thanks,
Matt M.

MS Office 2007 files are not being indexed (Failed to Index) in oracle

Oracle is not able to index MS Office 2007 files who are having extensions like *.docx, *.pptx, *.xlsx. I googled and found that its a bug in oracle. Have they released the fixes for it.
Request to please help me in this regard

user10933671 wrote:
There is no particular error it shows. The files are not getting indexed. In our application it says currently *.docx files are not index. My Oracle client is of version 10.2.0.
Since am really new to this, can you please tell me where i can find Metalink note 732823 as am not a paid customer.
That would be a problem. Access to patches (and MetaLink) are part of what you pay for when you buy a support contract.
Plz help me in this regard
Thanks in advance
Edited by: user10933671 on Apr 15, 2009 5:53 AM

QT files are not being played at the right height on laptop - why?

Hello eveyone,
The QT files imported in my MacBook pro are HQ but are being played 1280 x 405 (for the length of the screen, but not at the right height). I can't even play view them with the Actual file feature. The Movie Inspector tells me the clipes were shot normal (1920x1080) yet I can't se them properly.
I tried on a different MacBook pro and I have the same problem.
Does anybody know why? What should I do?
Thanks!

Actually, there is no problem with the original files.
Since I do not know how you came to this conclusion or if it is correct, my first thought is, "Show me the proof." I.e., post a captured image of the "Inspector" window for the player you are currently using. This will tell me which QT player you are using, whether the display is controlled by scaled dimension or aspect ratio settings, whether the file was encoded anamorphically or non-anamorphically, and whether the encoded aspect ratio matches the current display aspect ratio. It won't tell me the true aspect ratio of the video but a look at people and objects in a single video frame will normally disclose whether or not the display aspect is reasonably close or not.
If I import them in say Final Cut Pro, I can see them properly...so it's only the Quick Time on our laptops that display the clips wrong.
This isn't really helpful since FCP has settings that allow the user to both change and scale display dimensions and aspect ratios. QT 7 Pro will allow you re-scale the aspect ratio of a display but not alter its encoded aspect ratio while QT X will allow you to resize the display scale but only in reference to its encoded aspect ratio. Neither will allow you to display a file at dimensions greater than your current video card settings (i.e., where actual dimensions are greater than screen display resolutions for the encoded aspect ratio). In a similar manner, "fit" and "fill" option availability will also depend on the device/player and available screen resolutions/aspect ratiios which you have yet to indicate for either platform previously mentioned.
The full length of the screen, but not the full height... Do you have any advide on how to get the settings done? I looked into the QT settings and coulnd't find the right button/panel...
As previously stated, the first step is to determine if the files are being displayed correctly—i.e., at their correct aspect ratio for the allowable display space available for the current screen resolution available on the platforms being used for viewing. For instance, are you viewing in the full screen mode, or with menu bar being displayed and/or with the dock in or out of active display. These settings plus the video card screen resolulution will determine the maximum number of viewing pixels available fort the display height. Once the scale height is set by the QT player, then QT app will scale the display width to what it believes is correct display setting. If the aspect of the display is correct for the scaled height and width, then the file is being displayed correctly at the maximum display height available and there is nothing wrong and nothing to be corrected either in the file or the media player other than your desire to play a file at dimenensions larger than available for your display. (I.e., this is equivlent to saying you want to display a 52 inch diagonal picture on 32 inch HDTV—"it ain't gonna happen."
On the other hand, if the aspect ratio is incorrect for the maximum display height available for the app, system, and platform being used for viewing, then all of the other things I mentioned come into effect with regard to correcting the embedded display settings within the file.
Example: If i take an anamorphically encoded 1440x1080 (1920x1080) file and display it on my monitor set to a resolution of 2560x1440, then I can display the file at its "actual" display size (1920x1080) or even scale it to 2560x1440 (Full Screen Display mode) but if I reset my monitor to a 4:3 aspect resolution of 1600x1200, then I cannot play the file at its actual 1920x1080 display resolution since its width is limited to 1600 pixels and when the 16:9 aspect ratio is applied to the 1600 pixel display width, the display height is limited to 900 pixels in a "Fit to screen mode."
If your source file was recorded at 1920x1080, then the file's aspect ratio is 16:9 (1.78:1). However, your 1280x405 screen size implies that either the file is now being displayed in the "Fit" mode with a changed aspect ratio of 3.16:1 (1280x405) or that you are viewing the file in the "Fill" mode which chops off the top and bottom of your 1280x720 (1.78:1) display. (I.e., the "Fit" mode will scale the display at its current aspect to fit within the available display area and yet allow you see the entire display area as a "scaled view at the correct aspect while the "Fill" mode scales the video to fill your entire screen even if this means losing the top/bottom or left/right portions of the display area when the monitor resolution aspect ratio and video display ratio are not the same.)
Therefore, if your file is correctly formatted as you claim, use the "Command-F" QT shortcut to view the file at its largest available dimensions at the correct aspect ratio on any platform and using either the QT X or QT 7 player. (Don't forget to set the QT 7 "Full Screen" preference.)

Files are not being copied to the bin-debug folder

All my assets swfs are in a folder named "assets/swf" under the "src" folder.
The "Copy non-embedded files to output folder" is checked. BUT the folder is not being copied to the bin-debug...
This is also true for Icons folder (Also under "src")
Any idea why?

Bump!
comon I can't be the only one with that problem...

Swf flash files are not displaying neatly within table cells.

The latest version of Firefox (3.6.12) The website I have design now shows thick lines underneath the flash files. URL Below. The table of pictures should be neat, instead the cells in which the flash files are contained are increasing in height and breaking apart the table . This does not happen in previous version of Firefox, Internet Explorer & Google Chrome.
Is there anything i should be doing different when inserting flash files into web pages that have complex tables? Or is this a problem with Firefox?
http://www.arnoldwills.co.uk/Master_Home.html

Add a rule object { display: block } to the stylesheet. An object is an inline element by default.

M2v files are not being read on my new mac.

I installed quicktime pro, dvd studio pro 3, final cut pro 4...and my m2v files will not play in quicktime or the preview window. I get a pop up window saying, "Movie could not be opened. not a movie file." With any of those programs installed, shouldn't mpeg-2 codec be installed automatically? I plugged in my external HD with all my movies on it back up to my old g4...and they play fine there. I noticed there was a problem on the new mac when i tried to import them into DVD studio pro. So how do i get the m2v files to be viewable in quicktime and in DVD studio pro?
Thanks,
Tony

You must also install the MPEG2 playback component. It is also a good idea to use MPEG Streamclip which has some nice features for MPEG.
http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG

Files are not being closed on server

Hi,
We have a problem with our Intel macs connecting to our Windows 2003 SBS server. When a file is saved after being created or edited and i then closed on the mac it's still seen as opened on the server. Therefor other users can not open te file. We have older mac's as well with power pc cpu's and they don't seem to have this problem. Also the Windows pc's connected the the same server don't have this problem.
We ran the latest updates but that didn't solve the problem unfortunately.
I called Apple support but they didn't hear of the problem before and don't want to investigate this any further because it's an unknown problem !!
I hope any of you give me a direction what to look for.
Thanks in advance

How are they connecting? What Service?
Any particular APPs that do this? Adobe perhaps?

!!! Audio files are NOT being saved anymore !!!

Garageband does not save my recorded audiofiles anymore.
Everytime I try to reopen my project after saving, it just loads the software instruments but tells me everytime that "audiofile XXX.aif not found".
I reinstalled Garageband, however, I'm still stuck with the same problem. When I open the package content of projects i've worked with some time ago, I can find the audiofiles. But all the Garageband files I saved in the last week, are very small in size (1,3 mb as opposed to 150 or so) and apparently don't include the audiofiles anymore, whatsoever..
Can somebody help me out or is familiar with that kind of problem? I've pretty much tried everything in my knowledge, for instance to archive the project, but nothing has worked so far. A friend of mine said that it's probably a bug of some sort, but how can I get get rid of it?
I'd really appreciate your help. Thanks alot in advance.
podxt
PS: I'm using Garage Band 5.1 (iLife 09) on Mac OS 10.6.7 (Mac Book Pro)

Yep, it was a permissions issue which was solved by making sure we both had read/write privileges.
Somehow, though, it messed up privileges on my log-in for downloading podcasts. I was infromed that I didn't have enough privileges eventhough I had just made sure that permissions were set correctly.
I managed to find the answer here: http://discussions.apple.com/thread.jspa?threadID=1712753
For some reason on the download:podcast folder my privileges had vanished.

All plist files are not being pushed out

Current setup : 10.6 Server ( updated to 10.6.8 )
About 10 to 15 client machines ( 10 Desktops and 5 laptops )
These client machines are being managed in a group already for Software Updates from the server and hence already have the managed preferences folder on each machine.
I have just created a new com.apple.print.custompapers.plist file and have added it to the Preference Editor for that group and have set it to 'Often'. ( WorkGroup Manager -> Computer Group -> Preferences -> Details )
But after repeated attempts, I am still not able to push out this plist file to the client machines. I have tried the following already :
1. Deleting the Managed Preferences folder from each machine. Result : It recreates the folder again, but again with only the Software update plist file.
2. I have tried setting the plist to 'Always' from the 'Once, Often, Always' selection in the Preferences Editor. Result: Same result as above.
3. I have tried adding the file manually to Managed Preferences. Result : The file is removed at the next login, and cannot be used before that.
All clients are running on 10.6.8.
If you require any more information, please specify and I'll provide it. Thank you for looking over the problem and giving it thought.
Hope to hear from someone with a possible resolution soon.
Thanks.
Prat.

Have you tried setting another, pre-made preference in the computer group settings to see if it applies?
Have you run plutil /path/to/plist in the command line to see if it is OK (can't see why this would matter, this is a stab in the dark)?
P.S.
I have found that OpenDirectory can be quirky. I have found it become corrupt but still mostly functional quite quickly after setup. Since Apple has not well documented this software and offers no directory maintenance tools, every year I end up having to rebuild the server from scratch. I know this is not very helpful, but strange, unpredictable, and unbecoming behavior seems to be more frequent than I prefer. (Thankfully setting up an OS X Server is a veritable breeze compared to Microsoft Server Products).

Archive log files are not being created

I am doing some testing of the backup and recovery of our databases.
I have a database which is in archive log mode.
I have added some records to a table and I am expecting to see some archive files
being written to but nothing is being produced.
We are running Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
The current archive information is as follows :
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 1
Next log sequence to archive 3
Current log sequence 3
SQL> show parameter db_recovery_file_dest;
NAME TYPE VALUE
db_recovery_file_dest string /export/flash_recovery_area
When I look in the directory as indicated above I see no files :
cd /export/flash_recovery_area/MRESTORE/archivelog/2013_04_16
(no files)
I'm wondering if I am missing something obvious here.
Thank you in advance.

user6502667 wrote:
I am doing some testing of the backup and recovery of our databases.
I have a database which is in archive log mode.
I have added some records to a table and I am expecting to see some archive files
being written to but nothing is being produced.
We are running Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
The current archive information is as follows :
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 1
Next log sequence to archive 3
Current log sequence 3
SQL> show parameter db_recovery_file_dest;
NAME TYPE VALUE
db_recovery_file_dest string /export/flash_recovery_area
When I look in the directory as indicated above I see no files :
cd /export/flash_recovery_area/MRESTORE/archivelog/2013_04_16
(no files)
I'm wondering if I am missing something obvious here.
Thank you in advance.There can be several, but I'd say the most likely is that you simply didn't yet generate enough redo information to fill a redolog and thus trigger the writing of an archivelog.

.php files are not being opened within Mozilla FF

Similar Messages

Maybe you are looking for