PHP include in DW CS3
If I put a tag like this <?php include ('menu.php'); ?>
in my file, I can only preview it after putting the file on a
server. How can I preview it in my local computer without uploading
the files to a server?
Thanks
The use of virtual or a root reference in the include
function forces Apache
to look at its root folder for the files. It will not find
them there, and
therefore the include will fail. The only way to make this
work would be to
set up virtual hosts, in which case the root of the site is
always the
virtual root you have specified in the httpd.conf file.
Your use of the $_SERVER['DOCUMENT_ROOT'] autoglobal will
work on the
server, but not within DW (I think).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"polar_bare" <[email protected]> wrote in
message
news:glskk4$dnu$[email protected]..
>I did change the include to: <?php
virtual('/includes/header.inc.php'); ?>
> from: iv id="header">
> <?php include
($_SERVER['DOCUMENT_ROOT']."/includes/header.inc.php");
> ?>
> and it did display in DW, UNTIL... I save the file.
>
> I think it is how my web host is set up. When I changed
the include
> to:<?php
> virtual('/includes/header.inc.php'); ?> and uploaded
the page, I get an
> error:
> Fatal error: Call to undefined function virtual() in
> /home2/user/public_html/indextest.php on line 35.
>
> I searched this forum on how to set the base url for
includes in php and
> came
> up with the method: ?php include
> ($_SERVER['DOCUMENT_ROOT']."/includes/header.inc.php");
?> which works,
> but
> design view does not show it. No Big Deal.
>
>
http://www.jhcarpenter.com
>
>
>
Similar Messages
-
Dreamweaver CS3 - PHP Include error
Just upgraded to DW CS3 and found that any page containing a
PHP include no longer shows up correctly in design view. Only the
contents of the included file are shown, not the entire page.
We currently have to comment out ALL PHP included files to
edit the page, and then uncomment them again before posting to the
server.
Is there any work around or setting that can change the way
the PHP include files are handled??Hi David,
Thank you for following up. I'm really confused why PHP
includes which have worked in all previous versions of DW, parses
correctly on the server, and renders correctly in all browsers
suddenly won't show up in my design view in Dreamweaver after the
CS3 upgrade.
One of our PHP includes: <? include 'header.php'; ?>
The pages render correctly in the browser, but when I open
them in DW CS3, only the contents of the header are visible -- no
other page elements. We have to comment out the includes to see the
page contents.
In DW8, the contents of the include were hidden and the page
contents visible.
In CS3, the contents of the include are visible and the page
contents hidden.
The PHP include syntax hasn't changed -- the way Dreamweaver
shows the code has. Is there a preference or setting that can
change the view to hide includes? -
I am testing using php includes in a Dreamweaver template.
I have used code like <?php include '
http://www.svunet.org/includes/navbar.htm';?>
You can see a test file at
http://www.svunet.org/JVU/test.htm
Though my file extension is *.htm, I can use the php code
because of a .htaccess file (AddType application/x-httpd-php .htm)
((I have tried using <!--#include but this does not work on our
server with files with a .htm extension)
So far works great,
but..
I can't see the include in the Dreamweaver Design view. I
also can't preview the file in Preview in Browser. This makes it a
little difficult to get a sense of what the page looks like before
I upload it
I have "Preview using temporary file" and "Show contents of
include files" checked in Preferences.
Is this something I have to live with? Any workarounds I
could try to make these includes visible in Dreamweaver?
i am using DW CS3.The filename of the file to be included makes no difference
whatsoever. You
could use *.monkeybutt, if you wanted.
In order to see the include files in DW's Design view, you
need to have
their display enabled in your PREFERENCES under INVISIBLE
FILES Category.
In order to see the incude files in an F12 Preview, you need
to have
PREFERENCES | Preview In Browser set to use temporary files.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"luminousnerd" <[email protected]> wrote in
message
news:f7pm8q$2gn$[email protected]..
> Hmm, I'm not sure if the .htm extension will prevent
this from working or
> not...but here's what I do with my plain old .php pages,
and it shows up
> in the
> WYSIWIG part just fine:
>
> <?php require_once('header.php'); ?>
>
> You also may want to try Insert>Server Side Include
> -
Good Afternoon.
I am having a hard time trying to find what needs to be set to allow url
include statments in php on Netware 6.5 sp3, php5.
I know my code is correct after trying it on an external server, and it
seems all other php coding works. Just not the http includes as shown
below:
<?php
include ('http://your.website.here/filenamehere.php');
?>
php.ini is posted below:
[PHP]
; About php.ini ;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably
guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or
M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an
expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
; Expressions in the INI file are limited to bitwise operators and
parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the
equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend
extension),
; you may only use these constants *after* the line that loads the
extension.
; About this file ;
; This is the recommended, PHP 5-style version of the php.ini-dist file.
It
; sets some non standard settings, that make PHP more efficient, more
secure,
; and encourage cleaner coding.
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with. Using this
; file is warmly recommended for production sites. As all of the changes
from
; the standard settings are thoroughly documented, you can go over each
one,
; and decide whether you want to use it or not.
; For general information about the php.ini file, please consult the
php.ini-dist
; file, included in your PHP distribution.
; This file is different from the php.ini-dist file in the fact that it
features
; different values for several directives, in order to improve
performance, while
; possibly breaking compatibility with the standard out-of-the-box
behavior of
; PHP. Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
; - register_globals = Off [Security, Performance]
; Global variables are no longer registered for input data (POST, GET,
cookies,
; environment and other server variables). Instead of using $foo, you
must use
; you can use $_REQUEST["foo"] (includes any variable that arrives
through the
; request, namely, POST, GET and cookie variables), or use one of the
specific
; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"],
depending
; on where the input originates. Also, you can look at the
; import_request_variables() function.
; Note that register_globals is going to be depracated (i.e., turned
off by
; default) in the next version of PHP, because it often leads to
security bugs.
; Read http://php.net/manual/en/security.registerglobals.php for
further
; information.
; - register_long_arrays = Off [Performance]
; Disables registration of the older (and deprecated) long predefined
array
; variables ($HTTP_*_VARS). Instead, use the superglobals that were
; introduced in PHP 4.1.0
; - display_errors = Off [Security]
; With this directive set to off, errors that occur during the
execution of
; scripts will no longer be displayed as a part of the script output,
and thus,
; will no longer be exposed to remote users. With some errors, the
error message
; content may expose information about your script, web server, or
database
; server that may be exploitable for hacking. Production sites should
have this
; directive set to off.
; - log_errors = On [Security]
; This directive complements the above one. Any errors that occur
during the
; execution of your script will be logged (typically, to your server's
error log,
; but can be configured in several ways). Along with setting
display_errors to off,
; this setup gives you the ability to fully understand what may have
gone wrong,
; without exposing any sensitive information to remote users.
; - output_buffering = 4096 [Performance]
; Set a 4KB output buffer. Enabling output buffering typically
results in less
; writes, and sometimes less packets sent on the wire, which can often
lead to
; better performance. The gain this directive actually yields greatly
depends
; on which Web server you're working with, and what kind of scripts
you're using.
; - register_argc_argv = Off [Performance]
; Disables registration of the somewhat redundant $argv and $argc
global
; variables.
; - magic_quotes_gpc = off [Performance]
; Input data is no longer escaped with slashes so that it can be sent
into
; SQL databases without further manipulation. Instead, you should use
the
; function addslashes() on each input element you wish to send to a
database.
; - variables_order = "GPCS" [Performance]
; The environment variables are not hashed into the $_ENV. To access
; environment variables, you can use getenv() instead.
; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
; By default, PHP surpresses errors of type E_NOTICE. These error
messages
; are emitted for non-critical errors, but that could be a symptom of
a bigger
; problem. Most notably, this will cause error messages about the use
; of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off [Code cleanliness]
; It's not possible to decide to force a variable to be passed by
reference
; when calling a function. The PHP 4 style to do this is by making the
; function require the relevant argument by reference.
; Language Options ;
; Enable the PHP scripting language engine under Apache.
engine = On
; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off
; Allow the <? tag. Otherwise, only <?php and <script> tags are
recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On
; Allow ASP-style <% %> tags.
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
precision = 14
; Enforce year 2000 compliance (will cause problems with non-compliant
browsers)
y2k_compliance = On
; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the
output
; buffering functions. You can also enable output buffering for all files
by
; setting this directive to On. If you wish to limit the size of the
buffer
; to a certain size - you can use a maximum number of bytes instead of
'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using
ob_start().
; Using this ini directive may cause problems unless you know what
script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and
"zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling
the
; PHP function flush() after each and every call to print() or echo() and
each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = off
; The unserialize callback function will be called (with the undefined
class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=
; When floats & doubles are serialized store serialize_precision
significant
; digits after the floating point. The default value ensures that when
floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100
; Whether to enable the ability to force arguments to be passed by
reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the
function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each
time
; you use this feature, and the argument will be passed by value instead
of by
; reference).
allow_call_time_pass_reference = Off
; Safe Mode
safe_mode = off
; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off
; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =
; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir = "sys:/tmp"
; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe
Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_
; This directive contains a comma-delimited list of environment variables
that
; the end user won't be able to change using putenv(). These variables
will be
; protected even if safe_mode_allowed_env_vars is set to allow to change
them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; By default this is also set to "sys:/tmp". This is actually the value
that is
; set for the below mentioned "upload_tmp_dir" directive. If
"upload_tmp_dir" is
; changed, change the same for "open_basedir" also. This is done to allow
; phpMyAdmin application users to execute SQL commands through an SQL file.
open_basedir = ".;sys:/tmp"
; This directive allows you to disable certain functions for security
reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =
; This directive allows you to disable certain classes for security
reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <font color="??????"> would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000
; Misc
; Decides whether PHP may expose the fact that it is installed on the
server
; (e.g. by adding its signature to the Web server header). It is no
security
; threat in any way, but it makes it possible to determine whether you use
PHP
; on your server or not.
expose_php = On
; Resource Limits ;
max_execution_time = 30 ; Maximum execution time of each script, in
seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing
request data
memory_limit = 64M ; Maximum amount of memory a script may consume
(8MB)
; Error handling and logging ;
; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings (doesn't include E_STRICT)
; E_ERROR - fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often
result
; from a bug in your code, but it's possible that it
was
; intentional (e.g., using an uninitialized variable
and
; relying on the fact it's automatically initialized
to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best
interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; Examples:
; - Show all errors, except for notices and coding standards warnings
;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
; - Show all errors, except for notices
;error_reporting = E_ALL & ~E_NOTICE
; - Show only errors
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
; - Show all errors
error_reporting = E_ALL
; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error
logging
; instead (see below). Keeping display_errors enabled on a production web
site
; may reveal security information to end users, such as file paths on your
Web
; server, your database schema or other information.
display_errors = Off
; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off
; Log errors into a log file (server-specific log, stderr, or error_log
(below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On
; Set maximum length of log_errors. In error_log information about the
source is
; added. The default is 1024 and 0 allows to not apply any maximum length
at all.
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on
same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this
setting
; is On you will not log errors with repeated messages from different
files or
; sourcelines.
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On
; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off
; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off
; If html_errors is set On PHP produces clickable error messages that
direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from
http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used
including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html
; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"
; String to output after an error message.
;error_append_string = "</font>"
; Log errors to specified file.
error_log = "sys:/php5/error.log"
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
; Data Handling ;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"
; This directive describes the order in which PHP registers GET, POST,
Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right,
newer
; values override older values.
variables_order = "GPCS"
; Whether or not to register the EGPCS variables as global variables. You
may
; want to turn this off if you don't want to clutter your scripts' global
scope
; with user data. This makes most sense when coupled with track_vars - in
which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily
lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off
; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn them
off,
; for performance reasons.
register_long_arrays = On
; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables,
you
; should turn it off for increased performance.
register_argc_argv = Off
; Maximum size of POST data that PHP will accept.
post_max_size = 8M
; Magic quotes
; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = off
; Magic quotes for runtime-generated data, e.g. data from SQL, from
exec(), etc.
magic_quotes_runtime = off
; Use Sybase-style magic quotes (escape ' with '' instead of ').
magic_quotes_sybase = Off
; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"
; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On
; Paths and Directories ;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
; Windows: "path1;path2"
;include_path = ".;c:phpincludes"
; NetWare
include_path = ".;sys:/php5/includes"
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below.
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
extension_dir = sys:/php5/ext
; Whether or not to enable the dl() function. The dl() function does NOT
work
; properly in multithreaded servers, such as IIS or Zeus, and is
automatically
; disabled on them.
enable_dl = On
; cgi.force_redirect is necessary to provide security running PHP as a CGI
under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache
or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name
that PHP
; will look for to know it is OK to continue execution. Setting this
variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; cgi.rfc2616_headers configuration option tells PHP what type of headers
to
; use when sending HTTP response code. If it's set 0 PHP sends Status:
header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
; File Uploads ;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if
not
; specified).
upload_tmp_dir = sys:/tmp
; Maximum allowed size for uploaded files.
upload_max_filesize = 100M
; Fopen wrappers ;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On
; Define the anonymous ftp password (your email address)
;from="[email protected]"
; Define the User-Agent string
;user_agent="PHP"
; Default timeout for socket based streams (seconds)
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off
; Dynamic Extensions ;
; If you wish to have an extension loaded automatically, use the following
; syntax:
; extension=modulename.extension
; For example, on Windows:
; extension=msql.dll
; ... or under UNIX:
; extension=msql.so
; Note that it should be the name of the module only; no directory
information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.
;Windows Extensions
;Note that ODBC support is built in, so no dll is needed for it.
;extension=php_bz2.dll
;extension=php_cpdf.dll
;extension=php_curl.dll
;extension=php_dba.dll
;extension=php_dbase.dll
;extension=php_dbx.dll
;extension=php_exif.dll
;extension=php_fdf.dll
;extension=php_filepro.dll
;extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_ifx.dll
;extension=php_iisfunc.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_java.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_mcrypt.dll
;extension=php_mhash.dll
;extension=php_mime_magic.dll
;extension=php_ming.dll
;extension=php_mssql.dll
;extension=php_msql.dll
;extension=php_mysql.dll
;extension=php_oci8.dll
;extension=php_openssl.dll
;extension=php_oracle.dll
;extension=php_pdf.dll
;extension=php_pgsql.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_sockets.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_w32api.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
;extension=php_yaz.dll
;extension=php_zip.dll
;NetWare Extensions
extension=php_ldap.nlm
extension=phpmysql.nlm
extension=php2ucs.nlm
extension=php_xml.nlm
extension=php_ossl.nlm
; Module Settings ;
[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling
define_syslog_variables().
define_syslog_variables = Off
[mail function]
; For Win32 only.
;SMTP =
;smtp_port = 25
; For Win32 only.
; sendmail_from =
; For Unix only. You may supply arguments as well (default: "sendmail -t
-i").
;sendmail_path =
; Force the addition of the specified parameters to be passed as extra
parameters
; to the sendmail binary. These parameters will always replace the value
of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
[SQL]
sql.safe_mode = Off
[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented
; Allow or prevent persistent links.
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to
char.
; See the documentation on odbc_binmode and odbc_longreadlen for an
explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1
[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will
use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only
look
; at MYSQL_PORT.
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo
get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to
this
; file will be able to reveal the password as well.
mysql.default_password =
; Maximum time (in secondes) for connect timeout. -1 means no limit
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index
scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off
[MySQLI]
; Maximum number of links. -1 means no limit.
mysqli.max_links = -1
; Default port number for mysqli_connect(). If unset, mysqli_connect()
will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only
look
; at MYSQL_PORT.
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo
get_cfg_var("mysqli.default_password")
; and reveal this password! And of course, any users with read access to
this
; file will be able to reveal the password as well.
mysqli.default_password =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1
[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0
; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0
[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
sybase.max_links = -1
;sybase.interface_file = "/usr/sybase/interfaces"
; Minimum error severity to display.
sybase.min_error_severity = 10
; Minimum message severity to display.
sybase.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results
according
; to their Sybase type, instead of treating them all as strings. This
; compatability mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off
[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
sybct.max_links = -1
; Minimum server message severity to display.
sybct.min_server_severity = 10
; Minimum client message severity to display.
sybct.min_client_severity = 10
[dbx]
; returned column names can be converted for compatibility reasons
; possible values for dbx.colnames_case are
; "unchanged" (default, if not set)
; "lowercase"
; "uppercase"
; the recommended default is either upper- or lowercase, but
; unchanged is currently set for backwards compatibility
dbx.colnames_case = "lowercase"
[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0
[browscap]
;browscap = extra/browscap.ini
[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =
; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =
; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =
; Allow or prevent persistent links.
ifx.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
ifx.max_links = -1
; If on, select statements return the contents of a text blob instead of
its id.
ifx.textasvarchar = 0
; If on, select statements return the contents of a byte blob instead of
its id.
ifx.byteasvarchar = 0
; Trailing blanks are stripped from fixed-length char columns. May help
the
; life of Informix SE users.
ifx.charasvarchar = 0
; If on, the contents of text and byte blobs are dumped to a file instead
of
; keeping them in memory.
ifx.blobinfile = 0
; NULL's are returned as empty strings, unless this is set to 1. In that
case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0
[Session]
; Handler used to store/retrieve data.
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
; As of PHP 4.0.1, you can define the path as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
; The file storage module creates files using mode 600 by default.
; You can change that by using
; session.save_path = "N;MODE;/path"
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
;session.save_path = "/tmp"
session.save_path = sys:/php5/sessiondata
; Whether to use cookies.
session.use_cookies = 1
; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1
; Name of the session (used as cookie name).
session.name = PHPSESSID
; Initialize session on request startup.
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0
; The path for which the cookie is valid.
session.cookie_path = /
; The domain for which the cookie is valid.
session.cookie_domain =
; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php
; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.
session.gc_probability = 1
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other
method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit
register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.
session.bug_compat_42 = 0
session.bug_compat_warn = 0
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =
; How many bytes to read from the file.
session.entropy_length = 0
; Specified here to create the session id.
session.entropy_file =
;session.entropy_length = 16
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache
; Document expires after n minutes.
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0
; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeent ry"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one
batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. Default = 25
;mssql.max_procs = 25
[Assertion]
; Assert(expr); active by default.
;assert.active = On
; Issue a PHP warning for each failed assertion.
;assert.warning = On
; Don't bail out by default.
;assert.bail = Off
; User-function to be called if an assertion fails.
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you
want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0
[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ingres.max_persistent = -1
; Maximum number of links, including persistents. -1 means no limit.
ingres.max_links = -1
; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =
; Default user.
ingres.default_user =
; Default password.
ingres.default_password =
[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"
; Default port to connect to.
pfpro.defaultport = 443
; Default timeout in seconds.
pfpro.defaulttimeout = 30
; Default proxy IP address (if required).
;pfpro.proxyaddress =
; Default proxy port.
;pfpro.proxyport =
; Default proxy logon.
;pfpro.proxylogon =
; Default proxy password.
;pfpro.proxypassword =
[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read = On
[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true
[LDAP]
; Path to a directory which contains SSL certificates to be used for LDAP
over SSL
; Terminate the path with /
ldap.ssl_cert_dir = "sys:/php5/cert/"
[mbstring]
; language for internal character representation.
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP
; http input encoding.
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS
; enable automatic encoding translation accoding to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0
[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as
JIS.
; With mbstring support this will automatically be converted into the
encoding
; given by corresponding encode setting. When empty
mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola
and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS
[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off
[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400
; Local Variables:
; tab-width: 4
; End:
[Imagemagick Extension - Added By GKO - 08.01.05]
extension=php_imagick.nlm
Thank you for any insight you can give ... I am not a php person.
TonyTony,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
PHP Include not showing in design view
One of the advantages of Dreamweaver is the ability to see
the result of your code in the Design view. I am building a
template set for a web site I'm starting, and will be using the
template files in various paths and path depths. As a result, I am
not interested in using relative paths for things like PHP
includes.
If I use the following code for an include, the 'main.php'
file is included in the design view:
<?php include('/includes/templates/main.php'); ?>
When uploaded to the Apache server, this does not display
properly, because it is looking for the file in the user root, not
the Apache document root.
The portable code solutions to this would be to use the
following code:
<?php
include($_SERVER['DOCUMENT_ROOT'].'/includes/templates/main.php');
?>
This shows perfectly when uploaded to the Apache server, but
of course does not show in the Design view of Dreamweaver.
It is ridiculous to think that someone would want code one
way to see in the design view, and another for the web server, so I
am assuming that there is a way to do this so that it works both in
the desing view and on the web server.
I have had limited success using:
<?php virtual('/includes/templates/main.php'); ?>
which shows up in both the design view and on the web server.
However, I've experienced problems using virtual calls in scripts
called by the virtual command. I.e. nested inclusions. It would be
important to note that PHP's own documentation states "This
function may be used on PHP files. However, it is typically better
to use include() or require() for PHP files.", along with other
warnings.
So, basically, what I am asking for is a solution to allow
the following code to work and show the included file in the design
view:
<?php
include($_SERVER['DOCUMENT_ROOT'].'/includes/templates/main.php');
?>
Any suggestions?
BTW, I have tried setting the PHP include_path to the web
root so that the first example above would work. Doesn't work. I
have full, unrestricted access to the server, so if there is
another setting or configuration change I can make to have the
include function default to the web root, I'd love to know what it
is.quote:
Originally posted by:
Newsgroup User
It does that with all server-side includes, not just PHP. It
only shows
the HTML content of includes. To see dynamic output from a
server-side
language, you need to use Live Data view.
I'm not referencing dynamic output from PHP processing. I am
referencing includes. When using an include, Dreamweaver shows you
exactly what it would show you if you were looking at the included
file itself.
However, Dreamweaver makes the assumption that <?php
include('/inc/test.php'); ?> is a path located in the web server
document root. This is not the same assumption that web servers
make.
The Apache web server (at least the several that I use),
treat this same include as a request for /inc/test.php off of the
root of the server. To achieve the same include, relative to the
web document root, the include must be <?php
include($_SERVER['DOCUMENT_ROOT'].'/inc/test.php'); ?>.
Unfortunately, Dreamweaver does not understand this basic syntax
and will not show the included file in the design view.
The bottom line is that Dreamweaver could make it much
simpler to build portable code if it understood this syntax on the
include. You could take place that include in any location on your
site and it would pull the include from the proper location in both
your design view and on the web server.
Keep in mind that we establish a "document_root" when we set
up a site in Dreamweaver. The information is already there. The
handling of it just needs to be added to the include parser. -
Error message when trying to open PHP include?
Hi there,
I have seen a number of posts here about issues with
Contribute editing PHP pages and am starting to get concerned... I
have another one to add to the list.
I have created a site that uses PHP includes for the header
and the drop down menus, so that the client can go in and edit one
or two files to change things sitewide. Sounds good, right? Well,
in Contribute I can't open either of the PHP files that are being
included to edit them. I keep getting errors and whether I click on
"YES" or "NO" (to the question of whether I want to continue
running scripts on the page) it doesn't let me out...the error
warning box keeps popping up and I am in an endless loop. The only
way out is CTRL-ALT-DELETE.
One guess I had is that I am maybe missing something
important in the included PHP file that is necessary for it to be
recognized as a proper PHP file? In other words, the included PHP
files contain no header tags or anything like that, it is literally
just some divs that are supposed to be inserted at a particular
point on every page. Am I missing something, or am I encountering a
limitation of Contribute?
Many thanks!!
TimI think it's the content of the include that is causing your
troubles. Somehow you created a menu using Fireworks(?) or
Dreamweaver(?) and Contribute indicates javascripterrors, not php
errors...
Maybe its better, in this case, constructing a menu that
contains only an unordered list (check out project7 menus, or stu
nichols css site for more examples). Updating the menu will be
simpeler and also with less chance of errors by users. You can open
such a file without any troubles in Contribute. -
Issue with very basic php include
Hi there.
I am creating a site mainly in HTML, but with a file extension of .php due to me wanting to use a few php includes.
Most of my site files are in the root directly, and the includes I'm using are in an includes directory.
I have one or two pages that are in their own directory as well.
In my dreamweaver template file (that all of my pages use and are updated with), I have placed this:
<?php
include 'includes/social.inc';
?>
Now this works fine for all of the pages that are in the root directory, but for the ones in another directory, it doesn't.
So I tried the full address inside the quotes, but the include doesn't work at all with that.
Can anyone help me with this one... I'm sure its not too hard, just me being stupid.
Many thanks in advance,
CraigCraig,
I never use DW's template system for the very fact that you mention. It may be OK for small sites but becomes very combersome for larger sites.
You are already using SSI's. Why not have a template called index.php that include the files that are required.
For instance, If the About Us menu button is clicked, you include about.php; if the Contact Us button is clicked, you include contact.php.
To do this, you will need to include a URL parameter like ?page=about and use that parameter to choose the included file. There may be other ways to achieve the same, but the result will be much more satisfying than using DW's template system.
For a commercial solution, have a look here http://www.webassist.com/dreamweaver-extensions/framework-builder/
Gramps -
PHP Include Issue On New Domain
I have had the site liquidfirefishing.com up and running for some time now. I am using a PHP include for the header and footer. I have uploaded the same site to fishlf.com and the header and footer files do not appear, no change to the code. I receive a warning telling me that there is no such file or directory. Please look at both links below and let me know what the issue may be.
http://fishlf.com/about/index.php
http://www.liquidfirefishing.com/about/index.php
This is the code I am using for the include.
<?php $path = $_SERVER['DOCUMENT_ROOT']; $path .= "/header.php"; include_once($path);?>The header.php file cannot be found in the root directory, hence either place it in the root directory or adjust the path to the correct directory as in
$path .= "/correctpath/header.php"; -
Getting Error 404 when trying to open php documents in DW CS3 Test server
I am new to DW, php, MySQL and Apache. I have set up a test
environment but obviously have done something wrong. I currently
create my web pages from scratch in notepad and update my site with
a GUI FTP program, but I know with these new tools, I will
eventually be able to create the type of web site that I really
want and need. Every time I try to open any php document in DW CS3
using the"Preview/Debug in browser" button I get an error 404. The
browsers I use are ie7.0.5730.11 and Nav 9.0b2 . I know this may
not even be a DW issue, but I really am at an impasse. Any help
would be much appreciated.Jharek Wolf wrote:
> As I previously mentioned I am new to Apache also. Are
you willing to
> continue helping me?
It sounds as though you need to be taken through this process
step by
step. Even though you say you defined a testing server, the
fact that
you didn't have your documents in the server's document root
suggests
your site definition might also be wrong.
First things first. Since you're new to Apache, what happens
when you
type
http://localhost/ into your browser
address bar? Depending on the
version of Apache, you should get an Apache test page or
simply a page
that says "It works!". If you get neither, it means Apache is
either not
running or that it has been incorrectly installed.
Assuming Apache is working, have you installed PHP? If so,
put the
following code into a blank file (there must be no HTML or
DOCTYPE -
just the following line):
<?php phpinfo(); ?>
Save the file as test.php in the Apache document root. Then
type
http://localhost/test.php into
your browser address bar. If you see a
page with masses of detail about your PHP configuration, PHP
is working.
You can then move to the final stage. Create a new folder
inside the
Apache document root. This is where you should store your
site. If you
call it "mysite", these are the settings you need in the
Testing server
definition:
Testing server folder: /path/to/htdocs/mysite/
URL prefix:
http://localhost/mysite/
Don't take "/path/to/htdocs/mysite/" literally. It indicates
the
location of htdocs/mysite on your local hard drive. Use the
folder icon
to the right of the Testing server folder field to navigate
to it.
If you're new to PHP, you might find that my book, "The
Essential Guide
to Dreamweaver CS3 with CSS, Ajax, and PHP" answers a lot of
your
questions. It covers all the Dreamweaver PHP server behaviors
in detail,
as well as teaching the basics of PHP and database
maintenance. You can
find more details by following the link in my sig.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
Question about using a PHP include for the head info...
Hi,
I'm currently using PHP includes for my site header and footer info.
All my js/css files and meta declarations are in the head portion, which is in the header include.
How would I go about giving each page its own individual TITLE if the modifiable content of my pages is inside the body only? Since we can't specify title inside the body, am I stuck with the same page title for each page on the website?Is it true that you header include file has the </head> and <body> tags embedded? It would seem a lot neater - and safer - to use two include files, one for the header and one for the body. That way, the <title> is not in either of them and you can do with it what you will.
Barry -
Converting Business Catalyst Site to Either a php include site, or wordpress cms
I have a relatively simple for a client that was developed using business catalyst. I orginally was hoping to move the site to our sever, but have since found out that you must use adobe to host your site when using muse as a development enviornment. I would like to host this site on my server and the most viable option I can see would be to convert the site to either wordpress or a php include site.
Can anyone help me with converting this site are there any tutorials or resouces that focus on migrating your catalyst site to another cms or server? Any help is appreciated, thanks.If it was built in muse it must be a simple enough site that you can just rebuild it in not much time.
If you're doing it in php i suggest using Twig for templating. -
Dear Forum users,
I have created a Template, saved it as PHP, in one table
there is an include code:
<?php
include ("../file.inc.php");
?>
It works in the related file, just there are some strange
characters showing up in the browser window:

(How) can I get those out?
Thank you very much for your help!
M.You can see how this looks below.
Can you show me the top 10 lines of code from the doctype
down?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"artofflash" <[email protected]> wrote in
message
news:e7usgf$akj$[email protected]..
> Hi Murray,
>
> I posted the characters in my first message. It is just
3 of them:
>
> ???
>
> jeremyluby: The include file is just a test file and
contains the
> following
> code:
>
> <?php
>
> echo "<tr>
> <td width=\"161\">name</td>
> <td width=\"13\"> </td>
> </tr>";
> ?>
>
> This gets displayed right, but just after those 3
characters...
> Thanks for your help!
> -
Where to put PHP included files?
I'm trying to transfer website from my PC to MAC,
hoping that I can finish it without changing any code.
But many of my php files have "require()" function,
and I can't find the php included files' folder.
Please help~~I have a webpage on http://mysite.com/myproject
All my project files are in /Library/WebServer/Documents/myproject
(index.html, test.php, etc.) -
PHP include file not displaying in preview window
Hi all,
Hopefully I can explain this clearly. I have a website that
uses a sidebar that's common to all pages. In order to include this
"sidebar", I use:
<?php require_once "sidebar.php ?>
Now, originally on the page the whole sidebar html/php code
was in the page, but I cut it all and replaced it to include the
"sidebar.php" page. This way, when I change anything in the
sidebar, it cascades to all of the pages.
When I replace the original sidebar code that's in each page
with the "php require_once", close the file, and open it back up
again, the sidebar shows up as a small yellow "php" icon. It
doesn't let me "preview" it live anymore.
Is there any way to view what the php include file
has?PREFERENCES | Invisible Elements > Server-side includes
(enable)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"vooboo13" <[email protected]> wrote in
message
news:fi1m9b$261$[email protected]..
> Hi all,
>
> Hopefully I can explain this clearly. I have a website
that uses a sidebar
> that's common to all pages. In order to include this
"sidebar", I use:
>
> <?php require_once "sidebar.php ?>
>
> Now, originally on the page the whole sidebar html/php
code was in the
> page,
> but I cut it all and replaced it to include the
"sidebar.php" page. This
> way,
> when I change anything in the sidebar, it cascades to
all of the pages.
>
> When I replace the original sidebar code that's in each
page with the "php
> require_once", close the file, and open it back up
again, the sidebar
> shows up
> as a small yellow "php" icon. It doesn't let me
"preview" it live anymore.
>
> Is there any way to view what the php include file has?
> -
Using php include for password protection
Hi all, and as usual I am also new to RH. I am running a
password protection site using php include.
I have published my WebHelp project but was trying to change
the htm file to php and include the php include and I keep
receiving this error - "whlstt0.htm was not found on this server."
I have done a search and can not find any direction. Has
anyone an idea of how I can create a default php file the will open
all the frame files needed?
ThanrayHi Thanray. Please try not to cross post in multiple forums.
It doesn't help others searching for a solution if only one thread
has been answered.
Click
here
for the other thread.
Maybe you are looking for
-
How to set a default value to t-list when creating t-list programmatically
hi, I'm creating a t-list programmatically by calling n = populate_group('groupname'); populate_list('form.list','groupname'); In this case how to set a default value for the t-list thanks rani
-
Native resolution of external monitor not appearing in System Prefs - Displays
I have an Acer G206HL monitor, which has a 1600x900 native resolution. It's connected to a 13" MacBook Pro (the current non-retina model) via a Thunderbolt-to-VGA cable. The MBP is running Mountain Lion 10.8.3. When I go to System Preferences -> Disp
-
Including a JSP page into a JSF page
Hi !! I have read some posts here about <f:subwview>. There says to use: <f:subview> <jsp:include page="somepage.jsp"/> </f:subview>But it does not work. How can i include a jsp page into a JSF page? Thanks !!!
-
Hi, I noticed that Sun Java Application Server 9 has a platform edition available. (In the Application Server section of the site it appears that latest version with an enterprise release is version 8.1.) Does anyone know if an enterprise edition is
-
I have read through posts on this subject. I have looked as this to be the solution to have the same workspace that I had in the CC version, in the latest CC 2014 version. It hasn't worked. I'm now sad =(