PHP Include Issue On New Domain

I have had the site liquidfirefishing.com up and running for some time now.  I am using a PHP include for the header and footer.   I have uploaded the same site to fishlf.com and the header and footer files do not appear, no change to the code.  I receive a warning telling me that there is no such file or directory.  Please look at both links below and let me know what the issue may be.
http://fishlf.com/about/index.php
http://www.liquidfirefishing.com/about/index.php
This is the code I am using for the include.
<?php   $path = $_SERVER['DOCUMENT_ROOT'];   $path .= "/header.php";   include_once($path);?>

The header.php file cannot be found in the root directory, hence either place it in the root directory or adjust the path to the correct directory as in
$path .= "/correctpath/header.php";

Similar Messages

  • PHP Include issues

    I'm currently in the process of setting up a new website, and since I'm using several elements that return on every page - I decided to use PHP Include to do this. Problem is that it works for my first pages - but once I go further into detail (read: further into directories), it gets entirely messed up.
    My headers and footers don't show - and my spry menu which is also PHP Included only shows in text.
    Strangely enough it works for my first pages, which are situated one directory away; to illustrate this further I quickly describe how my root folder looks like in the sense of directories:
    ROOT:
    EN (this contains my English pages)
    DK (this contains my Danish pages)
    includes (this contains my PHP Include elements like header, footer, menu)
    images
    I copied off of the internet the following code, to force the line to start checking from the root of the whole folder:
    <?php
        include($_SERVER['DOCUMENT_ROOT']."/includes/header.php");
    ?>
    This seemed to work perfectly for my main pages directly situated in the EN directory, but once I'm a couple of directories deeper into the EN folder - it gets completely mocked up. I'm pretty sure this question has been raised many, many times, and believe me, I've looked around.
    I read a lot about config.php - but because of the fact my knowledge in the terrain of PHP is fairly limited - this subject seems truly like Chinese to me. If someone has a guide for dummies out there - that would be great. Otherwise, my question is this:
    How can I make sure my PHP includes show correctly and ACT correctly (in the case my menu) website-wide?
    Thank you in advance for the help!!

    I've never quite gotten to grips with the way 'includes' work. They are a great asset to use but a pain the butt to manage unless you set up a virtual server locally.
    I now always tend to use the full url to the include like:
    For local development:
    <?php include ('http://localhost/myWebFolder/includes/topNavigation.php'); >?
    Then once I'm ready to take it to remote I do a site wide find and replace:
    <?php include ('http://www.myWebSite.com/includes/topNavigation.php'); >?
    Problem runs deeper than that though because if you bring in an 'include file to a document where the 'includes' folder is NOT in the same dircetory the links (if you have links) will be broken.
    Typical example:
    index.php gets the navigation 'include file' from the 'includes' folder sitting directly in the site root folder.
    about.php which is in a directory named 'pages' also calls in the 'include file' from the 'includes' folder BUT it can't link back to the index.php page because the links don't have ../ they have index.php.
    So now for any links included in the 'includes file' you also have to use the full url.

  • Server 2012 Password issue on new domain

    We recently setup a new domain controller running Server 2012 R2 standard 64 bit. All user profiles were setup in Active Directory. The default password we set users was Welcome1 and we chose all the defaults for the password policy. We set each account
    to force the user to change their password when they first login.
    The issue we see is that when a user logs in and tries to change their password, it will not let them change their password the way it should be. For example, the account "testuser" was set to Welcome1. When I tried to change it to
    Atlanta@2 or Georgia8 or Nexeo+=7 or Kentucky9 it said "Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirements
    of the domain"
    I then tried to change it to Welcome2 and it accepted it.
    I then went on the server and reset it logged in as administrator and see no issues (I can change it to whatever I want). So the issue is on the user end. I also turned OFF complexity requirements.
    I logged back into the account and tried to change the password to Kentucky7 and it worked. I then did a CTRL ALT DEL and tried to change it to Kentuky9 and it gave the same error.
    I'm not sure what is going on. Maybe there are time intervals on how often a user is allowed to change their password in Server 2012? Any ideas as to what is going on?

    I logged back into the account and tried to change the password to Kentucky7 and it worked. I then did a CTRL ALT DEL and tried to change it to Kentuky9 and it gave the same error.
    I'm not sure what is going on. Maybe there are time intervals on how often a user is allowed to change their password in Server 2012? Any ideas as to what is going on?
    You must set minimum password age.
    What is this:
    Minimum password age

  • Problems using a php include file with an Add-on Domain.

    Hello,
    I am having an issue getting a php include file to work with a new add-on domain I am working on getting up and running.
    This include file is one that supplies the rest of the php code to a contact form page.  It works as it should for my original domain, same file no difference.  I made sure that the files hosted on the remote server had all read, write, execute permissions turned on.
    I have tried putting the include file in several different locations as a test, such as:
    I don't remember the exact name of the include file at the moment, as I'm at work so I will designate it below as 'includefile.php'.
    file path for add-on domain - ../public_html/lorentzpainting/includes/includefile.php
    alternatives I tried moving the file to - ../public_html/lorentzpainting/includefile.php
    When none of those options worked, I tried just pointing the path towards other places on the server that have the include file such as:
    ../public_html/includes/includefile.php
    ../public_html/includefile.php
    What can I do here?  Should I just give up on using the include and put all the code back in the page?  Doesn't seem like it should be this complicated, it works perfectly fine for my other site.. and still does.
    Thanks ahead of time to those who may assist me.

    here is the contents of the include file:
    <?php
    if (isset($_SERVER['SCRIPT_NAME']) && strpos($_SERVER['SCRIPT_NAME'],
    '.inc.php')) exit;
    // remove escape characters from POST array
    if (PHP_VERSION < 6 && get_magic_quotes_gpc()) {
      function stripslashes_deep($value) {
        $value = is_array($value) ? array_map('stripslashes_deep', $value) : stripslashes($value);
        return $value;
      $_POST = array_map('stripslashes_deep', $_POST);
      // assume that there is nothing suspect
        $suspect = false;
        // create a pattern to locate suspect phrases
        $pattern = '/Content-Type:|Bcc:|Cc:/i';
          // function to check for suspect phrases
      function isSuspect($val, $pattern, &$suspect) {
        // if the variable is an array, loop through each element
        // and pass it recursively back to the same function
        if (is_array($val)) {
          foreach ($val as $item) {
            isSuspect($item, $pattern, $suspect);
        else {
          // if one of the suspect phrases is found, set Boolean to true
          if (preg_match($pattern, $val)) {
            $suspect = true;
    //check the $_POST array and any subarrays for suspect content
    isSuspect($_POST, $pattern, $suspect);
        if (!empty($_POST['url'])) {
            $suspect = true;
        if ($suspect) {
            $mailSent = false;
            unset($missing);
        } else {
        //process the $_POST variables
        foreach ($_POST as $key => $value) {
            // assign to temporary variable and strip whitespace if not an array
            $temp = is_array($value) ? $value : trim($value);
            // if empty and required, add to $missing array
            if (empty($temp) && in_array($key, $required)) {
                array_push($missing, $key);
            } elseif (in_array($key, $expected)) {
                // otherwise, assign to a variable of the same name as $key
                ${$key} = $temp;
        //validate the email address
        if (!empty($email)) {
            // regex to identify illegal characters in email address
    $checkEmail = '/^[^@]+@[^\s\r\n\'";,@%]+$/';
    //reject the email address if it doesn't match
    if (!preg_match($checkEmail, $email)) {
        $suspect = true;
        $mailSent = false;
        unset($missing);
    //go ahead only if all required fields OK
        if (!$suspect && empty($missing)) {
    //initialize the $message variable
            $message = '';
    // loop through the $expected array
            foreach($expected as $item) {
    // assign the value of the current item to $val
                if (isset(${$item}) && !empty(${$item})) {
                    $val = ${$item};
                } else {
    // if it has no value, assign 'Not selected'
                    $val = 'Not selected';
    // if an array, expand as comma-sparated string
                if (is_array($val)) {
                    $val = implode(',', $val);
    // add label and value to the message body
      $message .= ucfirst($item).": $val\r\n\r\n";
    //limit line length to 70 characters
        $message = wordwrap($message, 70);
    //create Reply-To header
        if (!empty($email)) {
            $headers .= "\r\nReply-To: $email";
    // send it
        $mailSent = mail($to, $subject, $message, $headers);
        if ($mailSent) {
    // $missing is no longer needed if the email is sent, so unset it
            unset($missing); echo('Thank you for contacting Common Wealth Web Solutions');
    ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <title>Untitled Document</title>
    </head>
    <body>
    </body>
    </html>

  • Issue in SQL-server migration to new domain

    Hello,
    I have a scenario, where i need to migrate SQL 2005 servers db's ( around 30, small ones) to new server in a new domain. Destinationserver is 2012 R2, running SQL2014
    Domains have trust between them, and users have already been migrated to new domain. Users are using the databases with NT authing from the new domain (new logins & users have been created to old sql-server).
    I have backed up db's from old server and restored them in new server. After that, i restored logins with following article's script:
    http://support.microsoft.com/kb/918992
    I cleaned from the login script logins that are not in use, change the domainname to new in CREATE LOGIN phase (for the users who did not have already login from new domain) and the script ran without errors.
    User Mappings are like they should be on logins, however, the user & schema names are indicating to old domain. If i try to change them, i receive error about SID mismatch. This affects also users, who have already had new logins for new domain, their
    usernames on mappings are also changed to old domain's username. What is causing this?

    Hi,
    Could you try the following to migrate the logins and check the result?
    1. You may drop all the windows login. Modify the script generated by sp_help_revlogin step and replace create login
    to drop login.
    2. Use the script generated by sp_help_revlogin step to create
    Logins. Modify login name to accommodate new domain name.
    3. Grant server level roles using the output from:
    Generate Server level role related info :
    SELECT 'EXEC sp_addsrvrolemember ''' +
    p.name + ''' , ''' + r.name + ''';'
    FROM
    sys.server_principals r
    INNER JOIN sys.server_role_members m ON r.principal_id = m.role_principal_id
    INNER JOIN sys.server_principals p ON
    p.principal_id = m.member_principal_id
    WHERE
    r.type ='R'
    Sample Output :-
    EXEC sp_addsrvrolemember 'sa' , 'sysadmin';
    4. Map the SIDS using below command for all DB by using ALTER USER. For example:
    ALTER USER [DomainA\UserA] with login = [DomainB\UserA]
    See:
    http://blogs.technet.com/b/mdegre/archive/2011/06/27/can-i-move-sql-server-to-another-domain.aspx
    Here some useful articles:
    http://www.databasejournal.com/features/mssql/article.php/3922256/Re-generating-SQL-Server-Logins.htm
    http://support.microsoft.com/kb/918992/en-us
    http://support.microsoft.com/kb/240872
    Thanks.
    Tracy Cai
    TechNet Community Support

  • New Domain Names and Contact Form Issue

    Hello all,
    I'm working for a client who is using one of the newer domain name extensions. It reads like this: www.COMPANYNAME.farm
    The .farm is a new extension.
    On my contact form I use the e-mail address [email protected]
    The e-mails are never sent through. You can submit a form, it says it sends successfully, but the e-mail is never received.
    Any ideas if adobe muse has troubles with the new 'non-standard' domain extensions?
    Any other solutions?
    Thanks,
    Jonney

    Sounds like you are hosting on GoDaddy? If so, there are plenty of threads on here with the same problem.
    Generally what you need to do is create a dummy hotmail address and list it first. [email protected], [email protected] and that will likely fix your problem. Kind of a crazy work around but that is a GoDaddy issue (if in fact you are hosting with GoDaddy).

  • OAM 11gR2 new domain startup issue

    Installed OAM 11gR2 in new domain, completed security store configuration. Also checked validation, that also worked fine.

    I can't seem to find Note 1461370.1 in oracle support. I am having the same issue. I found a ticket opened as a bug, 13586338, with a simular issue but that was closed and no resolution was given.

  • Issue with very basic php include

    Hi there.
    I am creating a site mainly in HTML, but with a file extension of .php due to me wanting to use a few php includes.
    Most of my site files are in the root directly, and the includes I'm using are in an includes directory.
    I have one or two pages that are in their own directory as well.
    In my dreamweaver template file (that all of my pages use and are updated with), I have placed this:
    <?php
    include 'includes/social.inc';
    ?>
    Now this works fine for all of the pages that are in the root directory, but for the ones in another directory, it doesn't.
    So I tried the full address inside the quotes, but the include doesn't work at all with that.
    Can anyone help me with this one... I'm sure its not too hard, just me being stupid.
    Many thanks in advance,
    Craig

    Craig,
    I never use DW's template system for the very fact that you mention. It may be OK for small sites but becomes very combersome for larger sites.
    You are already using SSI's. Why not have a template called index.php that include the files that are required.
    For instance, If the About Us menu button is clicked, you include about.php; if the Contact Us button is clicked, you include contact.php.
    To do this, you will need to include a URL parameter like ?page=about and use that parameter to choose the included file. There may be other ways to achieve the same, but the result will be much more satisfying than using DW's template system.
    For a commercial solution, have a look here http://www.webassist.com/dreamweaver-extensions/framework-builder/
    Gramps

  • Php include not working

    Good Afternoon.
    I am having a hard time trying to find what needs to be set to allow url
    include statments in php on Netware 6.5 sp3, php5.
    I know my code is correct after trying it on an external server, and it
    seems all other php coding works. Just not the http includes as shown
    below:
    <?php
    include ('http://your.website.here/filenamehere.php');
    ?>
    php.ini is posted below:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; Under Windows, the compile-time path is the Windows directory. The
    ; path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably
    guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or
    M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an
    expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and
    parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the
    equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend
    extension),
    ; you may only use these constants *after* the line that loads the
    extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file.
    It
    ; sets some non standard settings, that make PHP more efficient, more
    secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes
    from
    ; the standard settings are thoroughly documented, you can go over each
    one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the
    php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it
    features
    ; different values for several directives, in order to improve
    performance, while
    ; possibly breaking compatibility with the standard out-of-the-box
    behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_globals = Off [Security, Performance]
    ; Global variables are no longer registered for input data (POST, GET,
    cookies,
    ; environment and other server variables). Instead of using $foo, you
    must use
    ; you can use $_REQUEST["foo"] (includes any variable that arrives
    through the
    ; request, namely, POST, GET and cookie variables), or use one of the
    specific
    ; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"],
    depending
    ; on where the input originates. Also, you can look at the
    ; import_request_variables() function.
    ; Note that register_globals is going to be depracated (i.e., turned
    off by
    ; default) in the next version of PHP, because it often leads to
    security bugs.
    ; Read http://php.net/manual/en/security.registerglobals.php for
    further
    ; information.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined
    array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the
    execution of
    ; scripts will no longer be displayed as a part of the script output,
    and thus,
    ; will no longer be exposed to remote users. With some errors, the
    error message
    ; content may expose information about your script, web server, or
    database
    ; server that may be exploitable for hacking. Production sites should
    have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur
    during the
    ; execution of your script will be logged (typically, to your server's
    error log,
    ; but can be configured in several ways). Along with setting
    display_errors to off,
    ; this setup gives you the ability to fully understand what may have
    gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically
    results in less
    ; writes, and sometimes less packets sent on the wire, which can often
    lead to
    ; better performance. The gain this directive actually yields greatly
    depends
    ; on which Web server you're working with, and what kind of scripts
    you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc
    global
    ; variables.
    ; - magic_quotes_gpc = off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent
    into
    ; SQL databases without further manipulation. Instead, you should use
    the
    ; function addslashes() on each input element you wish to send to a
    database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP surpresses errors of type E_NOTICE. These error
    messages
    ; are emitted for non-critical errors, but that could be a symptom of
    a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by
    reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are
    recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = On
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant
    browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the
    output
    ; buffering functions. You can also enable output buffering for all files
    by
    ; setting this directive to On. If you wish to limit the size of the
    buffer
    ; to a certain size - you can use a maximum number of bytes instead of
    'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using
    ob_start().
    ; Using this ini directive may cause problems unless you know what
    script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and
    "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling
    the
    ; PHP function flush() after each and every call to print() or echo() and
    each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = off
    ; The unserialize callback function will be called (with the undefined
    class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instanciated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision
    significant
    ; digits after the floating point. The default value ensures that when
    floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by
    reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the
    function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each
    time
    ; you use this feature, and the argument will be passed by value instead
    of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir = "sys:/tmp"
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe
    Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables
    that
    ; the end user won't be able to change using putenv(). These variables
    will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change
    them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; By default this is also set to "sys:/tmp". This is actually the value
    that is
    ; set for the below mentioned "upload_tmp_dir" directive. If
    "upload_tmp_dir" is
    ; changed, change the same for "open_basedir" also. This is done to allow
    ; phpMyAdmin application users to execute SQL commands through an SQL file.
    open_basedir = ".;sys:/tmp"
    ; This directive allows you to disable certain functions for security
    reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security
    reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <font color="??????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the
    server
    ; (e.g. by adding its signature to the Web server header). It is no
    security
    ; threat in any way, but it makes it possible to determine whether you use
    PHP
    ; on your server or not.
    expose_php = On
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in
    seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing
    request data
    memory_limit = 64M ; Maximum amount of memory a script may consume
    (8MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often
    result
    ; from a bug in your code, but it's possible that it
    was
    ; intentional (e.g., using an uninitialized variable
    and
    ; relying on the fact it's automatically initialized
    to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best
    interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error
    logging
    ; instead (see below). Keeping display_errors enabled on a production web
    site
    ; may reveal security information to end users, such as file paths on your
    Web
    ; server, your database schema or other information.
    display_errors = Off
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log
    (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the
    source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length
    at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on
    same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this
    setting
    ; is On you will not log errors with repeated messages from different
    files or
    ; sourcelines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = On
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that
    direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from
    http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used
    including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    error_log = "sys:/php5/error.log"
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST,
    Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right,
    newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You
    may
    ; want to turn this off if you don't want to clutter your scripts' global
    scope
    ; with user data. This makes most sense when coupled with track_vars - in
    which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily
    lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them
    off,
    ; for performance reasons.
    register_long_arrays = On
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables,
    you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from
    exec(), etc.
    magic_quotes_runtime = off
    ; Use Sybase-style magic quotes (escape ' with '' instead of ').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    ;include_path = ".:/php/includes"
    ; Windows: "path1;path2"
    ;include_path = ".;c:phpincludes"
    ; NetWare
    include_path = ".;sys:/php5/includes"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below.
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = sys:/php5/ext
    ; Whether or not to enable the dl() function. The dl() function does NOT
    work
    ; properly in multithreaded servers, such as IIS or Zeus, and is
    automatically
    ; disabled on them.
    enable_dl = On
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI
    under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache
    or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name
    that PHP
    ; will look for to know it is OK to continue execution. Setting this
    variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers
    to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status:
    header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if
    not
    ; specified).
    upload_tmp_dir = sys:/tmp
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 100M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory
    information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ;Windows Extensions
    ;Note that ODBC support is built in, so no dll is needed for it.
    ;extension=php_bz2.dll
    ;extension=php_cpdf.dll
    ;extension=php_curl.dll
    ;extension=php_dba.dll
    ;extension=php_dbase.dll
    ;extension=php_dbx.dll
    ;extension=php_exif.dll
    ;extension=php_fdf.dll
    ;extension=php_filepro.dll
    ;extension=php_gd2.dll
    ;extension=php_gettext.dll
    ;extension=php_ifx.dll
    ;extension=php_iisfunc.dll
    ;extension=php_imap.dll
    ;extension=php_interbase.dll
    ;extension=php_java.dll
    ;extension=php_ldap.dll
    ;extension=php_mbstring.dll
    ;extension=php_mcrypt.dll
    ;extension=php_mhash.dll
    ;extension=php_mime_magic.dll
    ;extension=php_ming.dll
    ;extension=php_mssql.dll
    ;extension=php_msql.dll
    ;extension=php_mysql.dll
    ;extension=php_oci8.dll
    ;extension=php_openssl.dll
    ;extension=php_oracle.dll
    ;extension=php_pdf.dll
    ;extension=php_pgsql.dll
    ;extension=php_shmop.dll
    ;extension=php_snmp.dll
    ;extension=php_sockets.dll
    ;extension=php_sybase_ct.dll
    ;extension=php_tidy.dll
    ;extension=php_w32api.dll
    ;extension=php_xmlrpc.dll
    ;extension=php_xsl.dll
    ;extension=php_yaz.dll
    ;extension=php_zip.dll
    ;NetWare Extensions
    extension=php_ldap.nlm
    extension=phpmysql.nlm
    extension=php2ucs.nlm
    extension=php_xml.nlm
    extension=php_ossl.nlm
    ; Module Settings ;
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling
    define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Win32 only.
    ;SMTP =
    ;smtp_port = 25
    ; For Win32 only.
    ; sendmail_from =
    ; For Unix only. You may supply arguments as well (default: "sendmail -t
    -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra
    parameters
    ; to the sendmail binary. These parameters will always replace the value
    of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to
    char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an
    explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will
    use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only
    look
    ; at MYSQL_PORT.
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the
    built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo
    get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to
    this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in secondes) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index
    scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLI]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect()
    will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only
    look
    ; at MYSQL_PORT.
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the
    built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo
    get_cfg_var("mysqli.default_password")
    ; and reveal this password! And of course, any users with read access to
    this
    ; file will be able to reveal the password as well.
    mysqli.default_password =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results
    according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatability mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [dbx]
    ; returned column names can be converted for compatibility reasons
    ; possible values for dbx.colnames_case are
    ; "unchanged" (default, if not set)
    ; "lowercase"
    ; "uppercase"
    ; the recommended default is either upper- or lowercase, but
    ; unchanged is currently set for backwards compatibility
    dbx.colnames_case = "lowercase"
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of
    its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of
    its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help
    the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead
    of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that
    case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored. Note: Windows users have to change this
    ; variable in order to use PHP's session functions.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    ;session.save_path = "/tmp"
    session.save_path = sys:/php5/sessiondata
    ; Whether to use cookies.
    session.use_cookies = 1
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other
    method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit
    register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 0
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeent ry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one
    batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. Default = 25
    ;mssql.max_procs = 25
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you
    want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [Ingres II]
    ; Allow or prevent persistent links.
    ingres.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ingres.max_persistent = -1
    ; Maximum number of links, including persistents. -1 means no limit.
    ingres.max_links = -1
    ; Default database (format: [node_id::]dbname[/srv_class]).
    ingres.default_database =
    ; Default user.
    ingres.default_user =
    ; Default password.
    ingres.default_password =
    [Verisign Payflow Pro]
    ; Default Payflow Pro server.
    pfpro.defaulthost = "test-payflow.verisign.com"
    ; Default port to connect to.
    pfpro.defaultport = 443
    ; Default timeout in seconds.
    pfpro.defaulttimeout = 30
    ; Default proxy IP address (if required).
    ;pfpro.proxyaddress =
    ; Default proxy port.
    ;pfpro.proxyport =
    ; Default proxy logon.
    ;pfpro.proxylogon =
    ; Default proxy password.
    ;pfpro.proxypassword =
    [Sockets]
    ; Use the system read() function instead of the php_read() wrapper.
    sockets.use_system_read = On
    [com]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constat registrations
    ;com.autoregister_verbose = true
    [LDAP]
    ; Path to a directory which contains SSL certificates to be used for LDAP
    over SSL
    ; Terminate the path with /
    ldap.ssl_cert_dir = "sys:/php5/cert/"
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation accoding to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    ;fbsql.batchSize = 1000
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as
    JIS.
    ; With mbstring support this will automatically be converted into the
    encoding
    ; given by corresponding encode setting. When empty
    mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola
    and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; Local Variables:
    ; tab-width: 4
    ; End:
    [Imagemagick Extension - Added By GKO - 08.01.05]
    extension=php_imagick.nlm
    Thank you for any insight you can give ... I am not a php person.
    Tony

    Tony,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • New Domain Controller does not show in our different site's Domain controller's Sites and Services

    Hi,
    we have two sites in our AD environment. OMA site and NY site. we have three domain controllers in our OMA site and two domain controllers in our NY site. All our DCs are windows server 2008R2 except one in our OMA site that is 2003R2 the domain
    functional level is also 2003R2.
    We decided to raise our functional level to 2008R2. I added a new domain controller in our OMA site and transferred all FESMOS from the DC that was running 2003R2 to this new domain controller.
    the issue now is that our NY site does not make any connection with the new domain controller in OMA site. it does not even show it under sites and services. I have checked the DNS settings and everything. if you try to replicate the connections
    from NY site it gives the following error: "The naming context is in the process of being removed or is not replicated from the specific server."
    can anyone plz tell me why this is happening mt brain is just frozen at this moment and cant figure out why is this happening

    Just noticed this replication issue has been going on for a while now but we never noticed until I added new DC. here is the error log for the NY site DC.
    Log Name:      Directory Service
    Source:        Microsoft-Windows-ActiveDirectory_DomainService
    Date:          1/4/2014 8:11:40 AM
    Event ID:      2042
    Task Category: Replication
    Level:         Error
    Keywords:      Classic
    User:          ANONYMOUS LOGON
    Computer:      NORDC1.vertrue.com
    Description:
    It has been too long since this machine last replicated with the named source machine. The time between replications with this source has exceeded the tombstone lifetime. Replication has been stopped with this source.
     The reason that replication is not allowed to continue is that the two DCs may contain lingering objects.  Objects that have been deleted and garbage collected from an Active Directory Domain Services partition but still exist in the writable partitions
    of other DCs in the same domain, or read-only partitions of global catalog servers in other domains in the forest are known as "lingering objects".  If the local destination DC was allowed to replicate with the source DC, these potential lingering object
    would be recreated in the local Active Directory Domain Services database.
    Time of last successful replication:
    2013-05-16 15:26:38
    Invocation ID of source directory server:
    9236ac56-d046-4632-b072-acbe823c5f6c
    Name of source directory server:
    accde843-11b2-476c-9783-9b29252d0ba5._msdcs.vertrue.com
    Tombstone lifetime (days):
    90
    The replication operation has failed.
    User Action:
      The action plan to recover from this error can be found at
    http://support.microsoft.com/?id=314282.
     If both the source and destination DCs are Windows Server 2003 DCs, then install the support tools included on the installation CD.  To see which objects would be deleted without actually performing the deletion run "repadmin /removelingeringobjects
    <Source DC> <Destination DC DSA GUID> <NC> /ADVISORY_MODE". The eventlogs on the source DC will enumerate all lingering objects.  To remove lingering objects from a source domain controller run "repadmin /removelingeringobjects <Source
    DC> <Destination DC DSA GUID> <NC>".
     If either source or destination DC is a Windows 2000 Server DC, then more information on how to remove lingering objects on the source DC can be found at
    http://support.microsoft.com/?id=314282 or from your Microsoft support personnel.
     If you need Active Directory Domain Services replication to function immediately at all costs and don't have time to remove lingering objects, enable replication by setting the following registry key to a non-zero value:
    Registry Key:
    HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Allow Replication With Divergent and Corrupt Partner
     Replication errors between DCs sharing a common partition can prevent user and compter acounts, trust relationships, their passwords, security groups, security group memberships and other Active Directory Domain Services configuration data to vary between
    DCs, affecting the ability to log on, find objects of interest and perform other critical operations. These inconsistencies are resolved once replication errors are resolved.  DCs that fail to inbound replicate deleted objects within tombstone lifetime
    number of days will remain inconsistent until lingering objects are manually removed by an administrator from each local DC.  Additionally, replication may continue to be blocked after this registry key is set, depending on whether lingering objects are
    located immediately.
    Alternate User Action:
    Force demote or reinstall the DC(s) that were disconnected.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS Replication" />
        <EventID Qualifiers="49152">2042</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>5</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2014-01-04T13:11:40.963263500Z" />
        <EventRecordID>38018</EventRecordID>
        <Correlation />
        <Execution ProcessID="660" ThreadID="1596" />
        <Channel>Directory Service</Channel>
        <Computer>NORDC1.vertrue.com</Computer>
        <Security UserID="S-1-5-7" />
      </System>
      <EventData>
        <Data>2013-05-16 15:26:38</Data>
        <Data>9236ac56-d046-4632-b072-acbe823c5f6c</Data>
        <Data>accde843-11b2-476c-9783-9b29252d0ba5._msdcs.vertrue.com</Data>
        <Data>90</Data>
        <Data>Allow Replication With Divergent and Corrupt Partner</Data>
        <Data>System\CurrentControlSet\Services\NTDS\Parameters</Data>
      </EventData>
    </Event>

  • PHP page looks fine by itself, but CSS Divs fall apart on PHP include

    Hi everyone. Thanks for your help in advance, this problem I'm having really has me puzzled.
    The issue I'm having is, I have two php files. body.php with content to be included and index-3.php as the container. When I load body.php by itself in the browser, the layout looks fine.  When I load the index-3.php file that uses the php include function to load body.php through itself, some of the divs in the body.php file come apart.
    I'm old hat at building pages with tables and Iframes, but very new at using divs and php.
    Here are the two files, so you can see for yourselves:
    http://www.hitn.tv/index-3.php (the container)
    http://www.hitn.tv/body.php (the included)
    Is this a CSS issue, or a php issue?
    The index:
    The Body:
                                                                                                                                  Content on this page requires a newer version of Adobe Flash Player.                             
        Temas de interés para la
    comunidad hispana Hoy
    debatiremos un interesante
    asunto que afecta a nuestra
    comunidad
      7/27 - Venezuela en la mira
      por   tráfico de drogas
        7/27 - Venezuela en la mira
        por   tráfico de drogas
          7/27 - Venezuela en la mira
          por   tráfico de drogas
            7/27 - Venezuela en la mira
            por   tráfico de drogas
              7/27 - Venezuela en la mira
              por   tráfico de drogas
                7/27 - Venezuela en la mira
                por   tráfico de drogas
    The Stylesheet:
    @charset "utf-8"; body { background-image: url(images/background.jpg); background-attachment: fixed; background-color: #FFE2BA; background-repeat: repeat-x; text-align: center; } .containerdiv { width: 953px; margin-left: auto; margin-right: auto; } .boxtext { font-size: 11px; color: #000; font-family: Arial, Helvetica, sans-serif; font-weight: normal; font-style: normal; line-height: normal; text-align: center; } .rightside { width:762px; height:584px; float: left; overflow: hidden; } .sidebar { } .lowerbar { } #mainsitedivcontainer { width: 762px; } .latestvideos { width: 699px; height: 61px; margin-bottom: 5px; margin-top: 0px; margin-right: 0px; margin-left: 0px; } #leftbookend { float: left; } #rightbookend { float: right; width: 31px; height: 142px; } #videobox { float: left; width: 550px; } #mainsitevideotextblock { float: right; width: 212px; } #mainsitevideotextblock { background-color: #F4F4F4; height: 420px; } .videothumbnaildivframe { height: 61px; width: 82px; overflow: hidden; float: left; } .videotextboxdescription { height: 61px; width: 151px; overflow: hidden; float: right; background-color: #FFF; border-top-width: 0px; border-right-width: 3px; border-bottom-width: 0px; border-left-width: 3px; border-top-style: none; border-right-style: solid; border-bottom-style: none; border-left-style: solid; border-right-color: #D4D4D4; border-left-color: #D4D4D4; text-align: center; } .picdivleft { float: left; height: 61px; width: 233px; } .picdivright { float: right; height: 61px; width: 151px; } .picthenvid { height: 61px; width: 233px; } .centerboxdiv { width: 233px; height: 61px; float: left; } #doubemenucontainer { height: 122px; width: 699px; float: left; } #middlebar { height: 15px; width: 762px; clear: left; } .boxtext { font-size: 11px; color: #000; font-family: Arial, Helvetica, sans-serif; font-weight: normal; font-style: normal; line-height: normal; } #finalvideowrap { height: 142px; width: 762px; background-color: #D4D4D4; overflow: hidden; } 
    Any help at all is much appreciated!
    Thanks so much,
    Evan

    Hi there, and welcome to the forums!
      Could you please provide a screenshot of the website when it is previewed in a browser/live view? This way I can better understand the conflicts that are occuring in your code.
      It is always a good practice when coding a website to preview it in the browser as you code, to make sure there are no conflicts. It's important to remember that in the end, your viewers will be viewing your site in a browser, not in Dreamweaver's preview. : )

  • How to reassign sysadmin role to accounts of a new domain once previous domain becomes unavilable?

    Hello,
    While working in lab enviornment; I came across following issue. I would like to request please shed light upon as to how one can gain access back to SQL server; in order to log on using object explorer; to re-assign sysadmin role; to a new domain to which
    underlying OS becomes member; once the OS losses connectivity to the previous domain it was member of.
    " SQL server instance was installed configured with "Windows Authentication" for DomainA. a service account was created in DomainA. service account was assigned "Log on As a service" right through group policy, was setup with SPNs
    etc. SQL server started OK.
    DomainA became unavailable. The server running SQL server database engine service removed from domainA. SQL Server database engine service disabled.
    DomainB is created. A new service account was with "Log on As a service" right assigned, SPNs setup. Server hosting SQL server enrolled in DomainB. SQL Server database engine service re-assigned domain service account. SQL server started OK with
    new service account."
    Problem:
    1. Using object explorer, I can't log onto SQL server instance to further configure SQL server security, assign sysadmin role to certain groups form the new DomainB.
    2. Log on to SQL server instance using local server's 'administrator' account is denied log on.
    3. Log on to SQL server instance using DomainB's 'administrator' account is denied log on.
    4. Log on to SQL server instance using Object explorer; from designated service account is denied log on.
    I even tried adding the service account to BuiltIn\Administrators local group using Restricted group; group policy feature, logged on to server using service account and attempted to log onto SQL server instance using service account credentails but it fails.
    How do we recover from this?

    Hello,
    Please follow this guide, for which you'll need a logon to the server which has local admin. Add your login in the new domain into the sysadmins once you connect to the instance locally.
    http://msdn.microsoft.com/en-us/library/dd207004.aspx
    -Sean
    The views, opinions, and posts do not reflect those of my company and are solely my own. No warranty, service, or results are expressed or implied.

  • Creating a new domain tree under the forest

    Hi
    I have one primary domain and one additional domain at moment so I want to create a new domain tree under the forest however during the configuration it gives me the below message ?
    the last time I installed without tick marking "Create DNS Delegation" option I had a lot of issue in replication and in DNS between my forest domain and this new tree domain.
    my main question would be:
    1- how to resolve this ?
    2- how to create a manual DNS delegation in Parent zone.?
    please suggest ?

    Hi greeMann,
    This is an expected behaviour and it can be ignored.  The error message occurs because this is the first DNS server so there is not a DNS server available to create the delegation from. 
    If you are not concerned that people in other domains or on the Internet will not resolve DNS name queries for computer names in the local domain, you can disregard the message and click Yes.
    Known Issues for Installing and Removing AD DS
    http://technet.microsoft.com/en-us/library/cc754463(WS.10).aspx
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Cannot start Managed Server- after creating a new domain

    I created a new domain, I could start Admin Server but ,I am unable to start Managed Server.
    My DB is up & running
    at com.collaxa.cube.engine.CubeEngine.finalizeActivity(CubeEngine.java:2842)
    at com.collaxa.cube.engine.CubeEngine.checkBlockConditions(CubeEngine.java:3557)
    at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2490)
    at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1133)
    at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:219)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:327)
    at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4350)
    at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4282)
    at com.collaxa.cube.engine.CubeEngine._createAndInvoke(CubeEngine.java:713)
    at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:545)
    at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:654)
    at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:355)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
    at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
    at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
    at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
    at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:106)
    at sun.reflect.GeneratedMethodAccessor840.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy245.handleInvoke(Unknown Source)
    at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.java:396)
    at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:35)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:141)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:82)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:909)
    at java.lang.Thread.run(Thread.java:619)
    Caused By: com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
    parts: {{
    summary=<summary>Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'ReadInputDataSelect' failed due to: JCA Binding Component connection issue.
    JCA Binding Component is unable to create an outbound JCA (CCI) connection.
    DemoDBAdapter:ReadInputData [ ReadInputData_ptt::ReadInputDataSelect(ReadInputDataSelect_inputParameters,CustomerCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510
    JCA Resource Adapter location error.
    Unable to locate the JCA Resource Adapter via .jca binding file element &lt;connection-factory/>
    The JCA Binding Component is unable to startup the Resource Adapter specified in the &lt;connection-factory/> element: location='eis/DB/DemoConnection'.
    The reason for this is most likely that either
    1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or
    2) the '&lt;jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DemoConnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR).
    Please correct this and then restart the Application Server

    Dear Anuj,
    I created a connection pool in DB adapter with JNDI name "eis/DB/DemoConnection"? and then updated
    BUT WHEN I SEE DB ADAPTER in deployments, the sate is New . It should be ACTIVE . right?
    Again when I start Managed Server,although my soa_server is up and running, I get this error
    However, I did not create any JMS for this domain.
    <Aug 9, 2010 11:21:45 AM CDT> <Warning> <oracle.soa.adapter> <BEA-000000> <JMSAdapter HelloWorld JMSMessageConsumer_init: Retrying connection; attempt #5>
    <Aug 9, 2010 11:21:45 AM CDT> <Warning> <oracle.soa.adapter> <BEA-000000> <JMSAdapter HelloWorld
    BINDING.JCA-12135
    ERRJMS_ERR_CR_QUEUE_CONS.
    ERRJMS_ERR_CR_QUEUE_CONS.
    Unable to create Queue consumer due to JMSException.
    Please examine the log file to determine the problem.
    at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:620)
    at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:497)
    at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.createConsumer(JMSMessageConsumer.java:342)
    at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.init(JMSMessageConsumer.java:913)
    at oracle.tip.adapter.jms.inbound.JmsConsumer.init(JmsConsumer.java:862)
    at oracle.tip.adapter.jms.JmsEndpoint.run(JmsEndpoint.java:163)
    at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
    at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
    at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Caused by: weblogic.jms.common.JMSException: [JMSExceptions:045103]While trying to find a topic or a queue we could not find the specific JMSServer requested. The linked exception may contain more information about the reason for failure.
    at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
    at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSyncNoTran(DispatcherAdapter.java:61)
    at weblogic.jms.client.JMSSession.createDestination(JMSSession.java:3192)
    at weblogic.jms.client.JMSSession.createQueue(JMSSession.java:2577)
    at oracle.tip.adapter.jms.JMS.JMSDestination.getQueue(JMSDestination.java:83)
    at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:605)
    ... 8 more
    Caused by: weblogic.jms.common.JMSException: [JMSExceptions:045103]While trying to find a topic or a queue we could not find the specific JMSServer requested. The linked exception may contain more information about the reason for failure.
    at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:87)
    at weblogic.jms.dispatcher.Request.getResult(Request.java:52)
    at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:1124)
    at weblogic.messaging.dispatcher.DispatcherImpl.syncRequest(DispatcherImpl.java:184)
    at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSyncNoTran(DispatcherImpl.java:287)
    at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSyncNoTran(DispatcherAdapter.java:59)
    ... 12 more
    Caused by: weblogic.jms.common.JMSException: [JMSExceptions:045103]While trying to find a topic or a queue we could not find the specific JMSServer requested. The linked exception may contain more information about the reason for failure.
    at weblogic.jms.frontend.FEManager.destinationCreate(FEManager.java:289)
    at weblogic.jms.frontend.FEManager.invoke(FEManager.java:548)
    at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:961)
    at weblogic.messaging.dispatcher.DispatcherImpl.syncRequest(DispatcherImpl.java:184)
    at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSyncNoTran(DispatcherImpl.java:287)
    at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSyncNoTran(DispatcherAdapter.java:59)
    at weblogic.jms.client.JMSSession.createDestination(JMSSession.java:3192)
    at weblogic.jms.client.JMSSession.createQueue(JMSSession.java:2577)
    at oracle.tip.adapter.jms.JMS.JMSDestination.getQueue(JMSDestination.java:83)
    at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:605)
    at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:497)
    at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.createConsumer(JMSMessageConsumer.java:342)
    at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.init(JMSMessageConsumer.java:914)
    at oracle.tip.adapter.jms.inbound.JmsConsumer.init(JmsConsumer.java:864)
    at oracle.tip.adapter.jms.JmsEndpoint.run(JmsEndpoint.java:163)
    at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:106)
    ... 2 more
    Caused by: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.jms.backend.jms'. Resolved 'weblogic.jms.backend'; remaining name 'jms'
    at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
    at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
    at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
    at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
    at weblogic.jms.frontend.FEManager.destinationCreate(FEManager.java:287)
    at weblogic.jms.frontend.FEManager.invoke(FEManager.java:548)
    at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:961)
    at weblogic.messaging.dispatcher.DispatcherImpl.syncRequest(DispatcherImpl.java:184)
    at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSyncNoTran(DispatcherImpl.java:287)
    at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSyncNoTran(DispatcherAdapter.java:59)
    at weblogic.jms.client.JMSSession.createDestination(JMSSession.java:3192)
    at weblogic.jms.client.JMSSession.createQueue(JMSSession.java:2577)
    at oracle.tip.adapter.jms.JMS.JMSDestination.getQueue(JMSDestination.java:83)
    at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:605)
    at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:497)
    at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.createConsumer(JMSMessageConsumer.java:342)
    at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.init(JMSMessageConsumer.java:913)
    at oracle.tip.adapter.jms.inbound.JmsConsumer.init(JmsConsumer.java:862)
    at oracle.tip.adapter.jms.JmsEndpoint.run(JmsEndpoint.java:163)
    at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
    ... 2 more
    >
    <Aug 9, 2010 11:21:46 AM CDT> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
    <Aug 9, 2010 11:21:46 AM CDT> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
    <Aug 9, 2010 11:21:47 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
    <Aug 9, 2010 11:21:47 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Aug 9, 2010 11:21:47 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    <Aug 9, 2010 11:21:47 AM CDT> <Notice> <Server> <BEA-002607> <Channel "Default" listening on 192.168.128.102:8001 was shutdown.>
    <Aug 9, 2010 11:21:47 AM CDT> <Notice> <Server> <BEA-002607> <Channel "Default[2]" listening on 127.0.0.1:8001 was shutdown.>
    <Aug 9, 2010 11:21:47 AM CDT> <Notice> <Server> <BEA-002607> <Channel "Default[3]" listening on 0:0:0:0:0:0:0:1:8001 was shutdown.>
    <Aug 9, 2010 11:21:47 AM CDT> <Notice> <Server> <BEA-002607> <Channel "Default[1]" listening on fe80:0:0:0:20c:29ff:fe81:998f:8001 was shutdown.>
    INFO: JMSAdapter JmsResourceAdapter_endpointDeactivation: Deactivating endpoint Endpoint_1
    [TopLink Info]: 2010.08.09 11:21:53.232--ServerSession(382132253)--deferred_session logout successful
    [TopLink Info]: 2010.08.09 11:21:53.232--ServerSession(381072707)--tracking_session logout successful
    <Aug 9, 2010 11:21:54 AM CDT> <Notice> <LoggingService> <BEA-320400> <The log file /u01/app/oracle/product/Middleware/user_projects/domains/base_domain4/servers/soa_server1/logs/soa_server1.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Aug 9, 2010 11:21:54 AM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /u01/app/oracle/product/Middleware/user_projects/domains/base_domain4/servers/soa_server1/logs/soa_server1.log00021. Log messages will continue to be logged in /u01/app/oracle/product/Middleware/user_projects/domains/base_domain4/servers/soa_server1/logs/soa_server1.log.>
    [oracle@OracleTest1 bin]$

  • Error message when trying to open PHP include?

    Hi there,
    I have seen a number of posts here about issues with
    Contribute editing PHP pages and am starting to get concerned... I
    have another one to add to the list.
    I have created a site that uses PHP includes for the header
    and the drop down menus, so that the client can go in and edit one
    or two files to change things sitewide. Sounds good, right? Well,
    in Contribute I can't open either of the PHP files that are being
    included to edit them. I keep getting errors and whether I click on
    "YES" or "NO" (to the question of whether I want to continue
    running scripts on the page) it doesn't let me out...the error
    warning box keeps popping up and I am in an endless loop. The only
    way out is CTRL-ALT-DELETE.
    One guess I had is that I am maybe missing something
    important in the included PHP file that is necessary for it to be
    recognized as a proper PHP file? In other words, the included PHP
    files contain no header tags or anything like that, it is literally
    just some divs that are supposed to be inserted at a particular
    point on every page. Am I missing something, or am I encountering a
    limitation of Contribute?
    Many thanks!!
    Tim

    I think it's the content of the include that is causing your
    troubles. Somehow you created a menu using Fireworks(?) or
    Dreamweaver(?) and Contribute indicates javascripterrors, not php
    errors...
    Maybe its better, in this case, constructing a menu that
    contains only an unordered list (check out project7 menus, or stu
    nichols css site for more examples). Updating the menu will be
    simpeler and also with less chance of errors by users. You can open
    such a file without any troubles in Contribute.

Maybe you are looking for

  • No organizer in Photoshop Elements 9 for Mac?

         Is that normal? I've been trying to learn how to use photoshop with online tutorials, but they are not much help when every video says to start in organizer which I don't have it. There isn't even a button for it. How do you import your photos i

  • Impact of having no switch profile on N5k

    Just curious, I am not real enthusiastic with switch profiles and config sync.  I want to remove the switch profile which I have tested in a lab situation and found doing so is not a major issue.  What I am interested in, has anybody done this and wh

  • Copyright Of DES

    Hi Everybody , I have implemented DES and TDES in Java. I want to publish the code and other technical information on the internet as an open source. Is there any copyright related issue regarding the code of DES. Please reply soon. Regards, Saibal B

  • Before there's a new iPhone model...

    Is there a chance we can get basic features that continue to be left out included? To me, it seems crazy to keep revising the iPhone and still having some of the most basic features left out, unless there is some good reasoning for doing so! Is there

  • DB13 unknown act

    Hi All, I am using SAP R/3 4.6B with SQL DB SQL Server 2000 In DB13 tcode there is 1 unknown act planned in DB calendar on Thursday of  every week and this unknown act give every time same error msg. Please help me for this problem. Regards, Saket Bh