PHP page with HTML and /HTML DOCTYPE ??

The sample forms that come with my formmail script start out
with a <php
and ?> then has embeded php code within the following
<html> - but no
DOCTYPE is specified.
Do I need a doctype in this kind of document?
Where should it to?
Above the initial <php?
After the ?> and before the <html>
OK - dumb question, but Quirks is bad and I don't know the
answer.
Dan H.
(I'm not ready for XHTML yet.)

> The HTML 'will' validate but I expect the PHP will cause
the W3C valuator
> to
> hickup.
The W3C validator will never see the PHP since it will have
already been
stripped from the page by the server before uploading the
resulting HTML
page to the validator.
> Is there really any value to ending the document file
name with '.php'
> versus '.html'?
Of course if the page contains PHP then there is (unless you
have your
server set to parse all file extensions). And, in general,
there is a
benefit to naming all pages with *.php extensions in that if
you ever decide
to add PHP scripting to any page in your site, you don't have
to worry
about search engine ramifications when you change that file's
extension.
Good luck Dan!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
<[email protected]> wrote in message
news:C5B9D4F2.241E4%[email protected]...
> Thank you Dave and Murray,
>
> This discussion is exactly what I needed.
>
> My plan is to produce <HTML> pages (ending in
'.html') that also contain
> PHP
> code ( <php ... ?> ) within the html arguments.
Some of this PHP will
> calculate filenames to link to.
>
> The pages will begin with an 'html 4.0.1 transitional...
Etc.' statement
> followed by the <head> ... etc.
>
> The HTML 'will' validate but I expect the PHP will cause
the W3C valuator
> to
> hickup. I'm guessing that this will NOT put me back into
'quirks mode'.
>
> Is there really any value to ending the document file
name with '.php'
> versus '.html'?
>
> BTW:
> I'll miss this forum. Everything I've learned about
Dreamweaver over the
> last several years and nearly everything I've learned
about coding - I've
> learned from reading posts in this forum by Dave,
Murray, Al, Patty,
> etc...
>
> Most of the information that is valuable to me came from
responses to
> questions asked by others.
>
> It's like the passing of a cherished era - you know -
like the '50s...
>
> I wish you good fortune my friends.
> I urge you to stick together, find an online home, and
let the rest of us
> know where it is so we can come and visit.
>
> Dan H.
>
> PS
> My neighbor says it's President Obama's fault!
> The fellow got elected preaching 'CHANGE'.
> Now everybody's doing it and nobody has any ;^]
> ...................................................
>
> [email protected] wrote:
>> Do I need a doctype in this kind of document?
>
> If it contains HTML, yes.
>
>> After the ?> and before the <html>
>
> Immediately before the opening <html> tag.
>
> ...................................................
>

Similar Messages

I applied a template to a page with SWFs and now that page does not play the SWFs. Why?

I applied a template to a page with SWFs and now that page does not play the SWFs (just a blank area where the SWF should be). When I detach the template it will play the flash file. This site will eventually be updated via Adobe Contribute. And I just discovered that when applying a template to a page that uses HTML datasets (Master/Detail),it no longer reads the Master/detail regions and displays a blank. Any thoughts?
[Moved to Dreamweaver forum by moderator]

Firstly, you shouldn't really 'apply' a template to a page, you should create a child page by going to FILE>NEW>Page from Template. Too many things can happen when applying a template the way you are doing it. eg:; editable and non-editable regions not matching up and being asked where to place these regions and in all likelihood, you end up with 2 or more of the same region.
When a swf file is inserted into a page, a corresponding Scripts folder is written automatically is stored in the root of the site - it is also linked to in the head of the document. What I believe is happening is that when you apply a template to the page, the Template has no idea that there is a swf file on the page and is not aware of the correct link to the Scripts folder. If you do a test and add the swf file to the template page itself, I bet that the links to the swf and the scripts folder are correct - because DW knows the correct path to the script file. Hence the reason the page probably works when you detach it from a template.

AVG tried to take over the Firefox Program. I unchecked some stuff on AVG and now Firefox doesn't lool right. There is only a bar at the top of the page with "Firefox" and "new Tab" . How do I get the Firebox homepage back?

AVG tried to take over the Firefox Program. I unchecked some stuff on AVG and now Firefox doesn't look right. There is only a bar at the top of the page with "Firefox" and "new Tab" . How do I get the Firebox homepage back?

Google Toolbar Options, in the Search tab, make sure that '''Enable the Google new tab page''' is check-marked. If that doesn't fix it for you, see this for support information about the Google Toolbar. <br />
[http://www.google.com/support/toolbar/?hl=en] <br />
Or visit the Google Toolbar forum. <br />
[http://www.google.com/support/forum/p/Toolbar?hl=en]
As far as your UserAgent showing Firefox 3.0.11, see this: <br />
https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
You might want to consider getting rid of that '''desktopsmiley''' program that has messed up your UserAgent, it is known as Malware.

Combining PHP Pages With HTML Pages.

Hi,
I started building my site in Dreamweaver CS4 using HTML pages, not knowing until now that any pages with interactivity need to be php.
If my site has seven pages, can four of them be HTML, and the rest PHP? If so, are there any special considerations I have to take into account? Is there anything special that would have to be done at any time during the process of creating the PHP pages, uploading to a web host, etc?
If not, is there a way to convert the HTML pages directly to PHP, or do I have to basically start from scratch?
Thank you.

Better to be consistent. You CAN have php, htm, html and shtml pages in your site, but this could cause a server conflict if you accidentally upload more than one index page to the same folder.
Simply rename your ***.htm pages to ***.php (F2).
Remove ***.htm pages from testing and remote servers.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

IWeb 09 - Bug Report with album and html fragment

I create an album with iPhoto and I insert it in a existent album page.
Publish the site in a local directory.
Navigate the page from the local directory and the page works.
Publish the site using Cyberduck FTP and navigate the page from the www
Results, the album doesn't work, only text in page.
Here the link of the page that I create with iWeb08 (work)
http://www.newsisters.it/ita/Album2009/Album2009.html
and here link of the page that I create with iWeb09 (doesn't work)
http://www.newsisters.it/ita/Album2009_error/Album2009.html
in this page at the left bottom I insert an HTML code for Counter Statistic from Shinystat,
it works using iWeb08 and doesn't work using iWeb09.
The code is

<script type="text/javascript" language="JavaScript" src="http://codice.shinystat.com/cgi-bin/getcod.cgi?USER=newsisters"></script>
<noscript>
</noscript>

Help me Please!
Thanks a lot

See: Some songs don't don't show under artist on my iPod.
From what I understand, once you add a second album name for that artist even for a single song, ALL the rest of the songs should now show up under that artist, even those without album names.

Firefox 2.0 - Problems with Webdynpro and HTML iviews

Hello all,
We have implemented the SAP Netweaver portal 7.0 SP 10. Everything works fine on IE 6.0 and 7.0. When we tested it on Firefox 2.0, we encountered the following problems:
1. The links on the detailed navigation area are missing
2. Web Dynpro applications dont work very well. Eg: Clicking on "Next" button does not take you to the next view, OVS does not work etc.
3. SAP transaction iViews(HTML) don't show up at all.
Although the <a href="https://websmp108.sap-ag.de/~sapidb/011000358700001936242005E#391,7,SAP NetWeaver 7.0 (2004s) Browser Support For End Users and Admin Functionality">PAM</a> indicates that Firefox 2.0 is supported for Webdynpro and HTML iviews, I am not sure why this is happening. Can someone help?
Thanks and Regards,
Reena

Adobe are working on updating their add-on for Firefox 4 - http://kb2.adobe.com/cps/896/cpsid_89622.html
McAfee have released a version of the Site Advisor for Firefox 4, but this add-on has caused problems for some people such as not being able to permanently hide the add-ons bar and issues with the back button not consistently working.

TableCellRenderer with JTextPane and HTML

I'm writing a TableCellRenderer that will be rendering HTML content using a custom extension to the JTextPane class. Where I'm having trouble is in calculating the necessary height to set the table row based on the content of the cell (in this case HTML text in my JTextPane component). I know the width of the table cell and I can figure out the width of the content (taking into account the formatting because of the HTML content). This all works perfectly until the column width shrinks enough to cause the underlying view to word wrap.
Here is the code snippet from my JTextPane to count the number of lines of text and calculate the width of the content
public int getWidthOfContent() {
    getLineCount();
    return m_iWidthOfContent;
public int getWidthOfContent(int p_iWidthOfArea) {
    getLineCount(p_iWidthOfArea);
    return m_iWidthOfContent;
public int getLineCount(int iComponentWidth) {
    int iWidth = 0;
    int iBreakCount = 0;
    int iHardBreakCount = 0;
    int iTotalWidth = 0;
    int iTotalContentWidth = 0;
    int iMaxHeight = 0;
    Document doc = getDocument();
    ElementIterator it = new ElementIterator(doc.getDefaultRootElement());
    StyleSheet styleSheet = null;
    if(doc instanceof HTMLDocument) {
      styleSheet = ((HTMLDocument)doc).getStyleSheet();
    if(iComponentWidth == -1) {
      iWidth = getWidth();
    else {
      iWidth = iComponentWidth;
    Element e;
    while ((e=it.next()) != null) {
      AttributeSet attributes = e.getAttributes();
      Enumeration enumeration = attributes.getAttributeNames();
      boolean bBreakDetected = false;
      while(enumeration.hasMoreElements()) {
        Object objName = enumeration.nextElement();
        Object objAttr = attributes.getAttribute(objName);
        if(objAttr instanceof HTML.Tag) {
          HTML.Tag tag = (HTML.Tag)objAttr;
//          if(tag == HTML.Tag.BODY) {
//            UCSParagraphView pv = new UCSParagraphView(e);
//            if(pv.willWidthBreakView(iWidth)) {
//              iHardBreakCount++;
          FontMetrics fontMetrics = null;
          if(styleSheet != null && styleSheet.getFont(attributes) != null) {
            fontMetrics = getFontMetrics(styleSheet.getFont(attributes));
          if(fontMetrics != null && fontMetrics.getHeight() > iMaxHeight) {
            iMaxHeight = fontMetrics.getHeight();
          if(tag.breaksFlow()) {
            //This must be a breaking tag....this will add another line to the count
            bBreakDetected = true;
            if(tag.equals(HTML.Tag.BR) || tag.isBlock() && (!tag.equals(HTML.Tag.HEAD) && !tag.equals(HTML.Tag.BODY))) {
              if(iTotalContentWidth == 0) {
                iTotalContentWidth = iTotalWidth;
                iTotalWidth = 0;
              else if(iTotalWidth > iTotalContentWidth) {
                iTotalContentWidth = iTotalWidth;
                iTotalWidth = 0;
              else {
                iTotalWidth = 0;
              if(tag.equals(HTML.Tag.H1) || tag.equals(HTML.Tag.H2) || tag.equals(HTML.Tag.H3) || tag.equals(HTML.Tag.H4)) {
                iHardBreakCount += 3; //These count as three lines (Blank - Content - Blank)
              else {
                iHardBreakCount++;
            iBreakCount++;
      if(!bBreakDetected) {
        Font font;
        FontMetrics fontMetrics;
        if(e.getDocument() instanceof HTMLDocument) {
          font = ((HTMLDocument)e.getDocument()).getStyleSheet().getFont(e.getAttributes());
          fontMetrics = getFontMetrics(font);
        else {
          font = getFont();
          fontMetrics = getFontMetrics(font);
        int iRangeStart = e.getStartOffset();
        int iRangeEnd = e.getEndOffset();
        if(fontMetrics.getHeight() > iMaxHeight) {
          iMaxHeight = fontMetrics.getHeight();
        if(e.isLeaf()) {
          String strText;
          try {
            strText = this.getText(iRangeStart, iRangeEnd - iRangeStart);
            if(strText.equals("\n")) {
              //iBreakCount++;
            iTotalWidth += SwingUtilities.computeStringWidth(fontMetrics, strText);
          catch (BadLocationException ex) {
            //Something happened.....don't care....just eat the exception
    m_iMaxFontHeight = iMaxHeight;
    m_iWidthOfContent = iTotalWidth;
    m_iHardBreakCount = iHardBreakCount;
    if(iWidth > 0) {
      int iLineCount = (iTotalWidth / iWidth) + iBreakCount;
      return iLineCount;
    return 1;
}And here is the code from my TableCellRenderer that uses the above information
   public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected,
                                                  boolean hasFocus, int row, int column) {
     if(ValidationHelper.hasText(value) && value.toString().indexOf("<html>") != -1) {
       UCSHTMLTextPane pane = new UCSHTMLTextPane();
       pane.setText(ValidationHelper.getTrimmedText(value.toString()));
       BigDecimal lWidthCell = new BigDecimal(table.getCellRect(row, column, false).getWidth() - 15);
       BigDecimal lWidthContent = new BigDecimal(pane.getWidthOfContent(lWidthCell.intValue()));
       int iHardBreakCount = pane.getHardBreakCount();
       BigDecimal lLineCount = lWidthContent.divide(lWidthCell, BigDecimal.ROUND_CEILING);
       int iLineCount = lLineCount.intValue();
       double dWidthCell = lWidthCell.doubleValue();
       double dWidthContent = lWidthContent.doubleValue();
       double dWidthContentPlusFivePercent = dWidthContent + (dWidthContent * .01);
       double dWidthContentMinumFivePercent = dWidthContent - (dWidthContent * .01);
       if(dWidthCell >= dWidthContentMinumFivePercent && dWidthCell <= dWidthContentPlusFivePercent) {
         iLineCount++;
       iLineCount += iHardBreakCount;
       int iMaxFontHeight = pane.getMaxFontHeight();
       int iHeight = (iMaxFontHeight * iLineCount) + 5;
       if ( (iLineCount > 0) && (table.getRowHeight(row) != iHeight)) {
         pane.setPreferredSize(new Dimension(0, iHeight));
         if(m_bAutoAdjustHeight) {
           table.setRowHeight(row, iHeight);
       if(iLineCount == 1) {
         if(iHeight != table.getRowHeight()) {
           if(m_bAutoAdjustHeight) {
             table.setRowHeight(iHeight);
       setComponentUI(pane, table, row, column, isSelected, hasFocus);
       return pane;
}Any suggestions?

Hello,
You must initialize correctly your JTextPane like this:
javax.swing.text.html.HTMLEditorKit htmlEditorKit = new javax.swing.text.html.HTMLEditorKit();
javax.swing.text.html.HTMLDocument htmlDoc = (javax.swing.text.html.HTMLDocument)htmlEditorKit.createDefaultDocument();
setEditorKit(htmlEditorKit);
setDocument(htmlDoc);
setEditable(true);
setContentType("text/html");

Creating PHP pages with MaxDB PHP Generator (Access Database)

Hi, I'am trying to create a webshop from an AccessDB, and while searching around I found MaxDB PHP Generator. However, how do I have to configure the Connection Properties?
I know which database to use, but I don't know what I should put in @ 'host name' because the DB is on the same PC.
I tried the computer's own name, but it didn't work. Have I missed something? I read through the tutorial quite carefully...
The wiki's not very helpfull on this topic either, even with all the information.

Better to be consistent. You CAN have php, htm, html and shtml pages in your site, but this could cause a server conflict if you accidentally upload more than one index page to the same folder.
Simply rename your ***.htm pages to ***.php (F2).
Remove ***.htm pages from testing and remote servers.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Pages with Adressbook (and Bento) – who can help?

I created the fields in my pages document as required. I imported an address from addressbook. That worked.
Then I imported an address from addressbook that I previously imported in adressbook from Bento (in Bento). It imported the Name and company but not the address like street and city. It seems that it does not recognize the address as an address?
Can it have something to do with the German version? Because the address created in Addressbook worked, the one from Bento not. What can help?
Thanks for helping me,
Michael

Michael Munich wrote:
New idea: I opened the .csv with TextEdit and replaced the ; with ,
at the moment I am in the middle of the importing process in addressbook and hope this will work.
What will you do for decimal numbers containing a comma ?
But I assumes that there is no such datas in a list of address.
This huge oddity: a program from Apple and a program from a 100% Apple's subsidiary which don't speak the same language is already reported to Bugs hunters.
Yvan KOENIG (from FRANCE vendredi 8 août 2008 17:23:54)

HD quicktime movie create page with iweb and host externally?

I made a 3
min HD movie the file is 1.5gig I have an account with
blue host that allows me 300gigs of space. I uploaded the movie no problem.
Now i want to make a web page with a link to that movie using iweb.
So in other words i design the simple page on i web and than upload it to
bluehost. How do I size a quicktime movie to be the correct size example
852x480? on the templates the movies are to small?

How did you fit a 1.5GB file into 300MB's of space?
What viewer is going to wait two or three hours (weeks on dial-up) to view a 3 minute file?
Your best solution is to link to file and let your viewers download it. Just use the complete URL as your link.

Sync speed in Pages with Yosemite and iOS 8

Is anyone else finding the use of Pages in iOS 8 frustrating becaus of the slow — really SLOW — speed at whch documents are syncing between devices using iOS 8 and those using Yosemite. Yeeesh! I about read to go back to Mavericks and iOS 7! I have an iMac, a Macbook Pro, an iPad Air, and a iPhone 5. I have to wait 5 - 15 minutes many times to be able to create a new document or to retreive a document and use it.
Is there a way to fix this issue?

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

Online banking site now shows login page as text-only; on different computer it still shows page with images and clickables -- is there a fix?

Previously when I logged in to my INGdirect online bank account, the login window came up showing images and clickable hotspots. Recently, the login window changed to a text-only version. On two different computers running Firefox, the login comes up in the previous version, with images and clickable hotspots. I'm unaware of having done anything to change my settings either in Firefox or on the banking website. Because it seems to be localized on this computer, I've tried downloading latest version of Firefox, but got no change, login still comes up in text-only format.

Try clearing your browser cache.
Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.

Problem with CSS and HTML

I don't understand what is wrong but I don't see the styles when I preview my html in chrome.
Here's my CSS
@charset "UTF-8";
/* CSS Document */
html {
          min-width: 768px;
body {
          font-size: 100%;
          font-family: Arial, Helvetica, sans-serif;
          line-height: 1.5rem;
.wrapper {}
img {
          width: 100%; /*All images will be 100% the size of their parent */
.baseline {
          background-image: url(../images/baseline.svg);
strong {
          font-weight: bold;
em {
          font-style: italic;
/* ----------------------------------------------------------------------------------------- ------------- Masthead */
.masthead {
          height: 6rem;
          background-color: rgba(51,153,255,1);
          margin-bottom: 1,5rem;
h1 {
          font-size: 1.5rem;
          color: #9F6;
          position: absolute;
          margin: 2.25rem 0 0 4%;
/*---------------------------------------------------------------------------------------- --------------------article --*/
article {
          padding: 0 4% 1.5rem;
.headline {
          height: 4.5rem;
          margin-bottom: 1.5rem;
          background-colour: rgba(0,0,0,.15)
h2 {
          font-family:Georgia,"Times New Roman", Times, serif;
          font-size: 2.25rem;
          position: absolute;
          margin: 1.5rem 2% 0;
.placeholder {
          width: 20%;
          flow: left;
          margin: 0 2.5% 1.5rem 0;
p {
          margin-bottom: 1.5rem;
.footnote {
          height: 4.5rem;
          background-color: rgba(0,0,0,.15)
.footnote p {
          font-size: .875rem;
          position: absolute;
          margin: 1.5rem 2% 0;
/*---------------------------------------------------------------------------------------- -------------------- Bottom --*/
.Bottom {
          height: 15rem;
          background-color: rgba(51,153,255,1);
.bottom p {
          font-sizes: .875rem;
          color; #FFF;
          position:absolute;
          margin: 1.5rem 4%
Here's my HTML
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<title>Box Model Tutorial</title>
<link href="box-model/reset.css" rel="stylesheet">
<link href="box-model/general.css" rel="stylesheet">
</head>
<body class="baseline">

                  <header class="masthead baseline"> 
                                <h1>Victoria</h1>

           <div class="wrapper">
                         <article>
                          <header class="headline">
                                    <h2>Tourism British-Columbia</h2>
                          </header>
                               <img src="box-model/images/images/British_Columbia_Legislative_Building,_Victoria,_BC_Wallpape r_2c8nm-1.jpg" alt="box-model/images/images/British_Columbia_Legislative_Building,_Victoria,_BC_Wallpape r_2c8nm-1.jpg">
                                
                                <p>The capital city of British Columbia, Victoria boasts many historic buildings and some of the most fascinating museums in Western Canada. The city benefits from one of Canada's mildest climates, which allows its residents to pursue outdoor pleasures all year round.
Victoria enjoys some of the country's most exhilarating scenery: there's an ocean or mountain vista around every corner, while the city's flower gardens are famous the world over. Whether your taste runs to golfing, hiking, biking and fishing or you're more the shopping, dining and theatre type, there are no end of delights for you and your family in Victoria – the city was included in the Top 10 Family Vacations in Canada in the TripAdvisor 2011 Travelers' Choice awards.
Established in 1843 by James Douglas as a fort for the Hudson's Bay Company, Victoria's British ancestry is apparent in the double-decker buses, horse-drawn carriages, formal gardens, and tearooms. The city is now a cosmopolitan centre with a lively entertainment scene and a wonderful array of attractions.</p>
               <footer class="footnote">
                                     <p> Article Footer (Related Articles, Footnotes, Authors Bio, etc.) </p>
                                 </footer>
                      </article>
                       </div> 

    <footer class="bottom">
             <p>Main Footer (Copyright, related Links, Legal, privacy, logo, etc.)</p>
    </footer>
</body>
</html>

Lines 6 & 7 of your HTML file (exercise-boxmodel.html), change this:
<link href="box-model/reset.css" rel="stylesheet">
<link href="box-model/general.css" rel="stylesheet">
to this:
<link href="reset.css" rel="stylesheet">
<link href="general.css" rel="stylesheet">
Your CSS files are in the same folder as your .html file. But your original linkage shows that they're within a sub-folder called 'box-model'. That link was returning a 404 Not found error. Hence, the browser was unable to load your CSS files.
Replace the code and you should be able to view it.

Help With Flash and HTML

I have just completed my website(www.Aquiteoddsite.com).
It is a variety cartoon site for my partner and I. We where
going to upload the file the other day but when we put it on an
HTML page- The Audio was happing abut a second before the
animation. I then checked to make sure it was not in the actual
file. I wacthed it by itself and it worked fine. Then I tried again
to toput it on an html page- once again it wigged out. Finnaly I
tried to put it on a different site and it still failed o work
properly. I don't remeber futzing around with my publishing
settings either.
If you be so kind as to help me, we would greatly apprecate
it. to the 5th power.
Thanks in advance. Quite Odd.

All Active content on a page will always rise to the top, so
to speak,
including Flash, certain form elements, Java applets, and
Active X controls.
This means that each of these will poke through layers. There
is not a good
cross-browser/platform reliable way to solve this issue, but
if you can be
confident in your visitors using IE 5+ or NN6+, then you can
use the Flash
wmode parameter (however, Safari does not support this
properly!).
Adobe articles:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15523
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"[email protected]" <[email protected]>
wrote in message
news:foc4db$2nh$[email protected]..
> Hi folks, just a quick query that i'm sure someone out
there will know
> the
> answer to (or at least i'm hoping someone will) I've
been working on a
> new
> site (first attempt so be gentle with any criticism
please!!) I used
> fireworks8 to create a navmenu and it works a treat,
however i also have
> flash
> on some of the pages, and the fireworks submenus don't
seem to like
> showing up
> over the flash! see
http://www.gammies.co.uk/construction.asp
for what i
> mean.
> the nav links to construction, groundcare and
recreational don't show
> becuase
> of the flash. I was trying to see if there was some
option to send the
> flash
> to the back of the page as such so that the navmenu was
on top but
> couldn't get
> it, and i'm no sure what i'd have to do code wise to
change it (if it's a
> code
> issue). By the way it does it in both firefox and IE All
help greatly
> appreciated.. Thanks Chris
>

Session timeouts for login page with in a html frame

Hi, i have a login page which when the session times out gets redisplayed within the frame of the html page where the session timed out , i have tried setting the session timeouts to be less than the other application so that the login page will timeout before the documentum application but this does not make a difference.
does any one know how i could get the login page to redisplay by itself, outside of the html frame. do i need to have some javascript to figure out if there is a frame then redraw the page etc...and how should i di this ? any working examples will be appreciated.

You would certainly need some Javascript or use the meta-refresh tag to the session timeout time. If you set the meta-refresh tag in a frame to a time just a little bit bigger than the session timeout time and the set your security mechanisms to force the user to login in again when the session times out, the frame will refresh after the session has timed out and the application should forward the frame to the login page.
<meta http-equiv="refresh" content="session-timeout-timeout+1">
(timeout time is in seconds)

PHP page with HTML and /HTML DOCTYPE ??

Similar Messages

Maybe you are looking for