Php plugin 1.0 for sun java system webserver

Hi,
I installed php plugin 1.0 for sun java system webserver 7. But it supports default 2 DB mysql and postgresql. Can i configure oracle 10g DB support?
Appreciate if you could throw some light on this.
Thanks,
Krish

Using PHP with NSAPI plugin will definitely get you the best performance. However, if you are using PHP with NSAPI plugin enabled then you might have to be careful when you are installing any of the PHP extensions from PECL to make sure that they are thread safe.
Note: There can be a potential issue only when using any of PECL (http://pecl.php.net) extension and not with any PEAR (http://pear.php.net) extensions.
For example, if you PHP built for NSAPI and then using on top of WordPress or Drupal or on top of frameworks like ZF etc should not be a problem
To compile PHP 5.3 with NSAPI, you would do some thing like
./configure --with-nsapi=<web-server7-install-directory>
To compile PHP 5.3 with FastCGI, you would do some thing like
./configure enable-cgi enable-force-cgi-redirect

Similar Messages

Configuring Sun Java System webserver 6.1 SP2 to JBOSS 4.0

how to redirect a request from Sun Java System webserver 6.1 SP2 to JBOSS 4.0. What are the config chages to magnus.conf and obj.conf.
do we need any plugins for this

I'm unable to configure the Java webserver with JBOSS.
I'm getting following info while running the server.
Sun ONE Web Server 6.1SP3 B08/17/2004 18:33
info: CORE3016: daemon is running as super-user
info: PASS1000: Sun ONE Web Server 6.1SP3 Reverse Proxy Plugin B09/09/2004 11:59
config: PASS1007: init-passthrough directive ignored
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.2_04] from [Sun Microsystems Inc.]
info: WEB0100: Loading web module in virtual server [vs-admin] at [admin-app]
info: HTTP3072: [LS ls1] http://yamuna:8888 ready to accept requests
startup: server started successfully
My congifuration settings are:
Magnus.conf: placed the libpassthrough.so in specified location.
Init fn="load-modules" shlib="/opt/SUNWwbsvr/plugins/passthrough/libpassthrough.so" funcs="init-passthrough,auth-passthrough,check-passthrough,service-passthrough" NativeThread="no"
Init fn="init-passthrough"
Obj.conf:
NameTrans fn="assign-name" from="/ApplnName(|/*)" name="ApplnName"
<Object name="ApplnName">
ObjectType fn="check-passthrough" type="magnus-internal/passthrough"
Service type="magnus-internal/passthrough" fn="service-passthrough" servers="http://myIP:8080/ApplnName/"
</Object>
When I start server, the server is running fine but it is ignoring the init-Passthrough directive.
I think i have to do some setting in magnus.conf. please help me out

Hello.war_deployed not generated for Sun Java System Application Server

I have installed and started the Sun Java System Application Server successfully, and can access http://localhost:8080 without any problem. However, after I copied the hello.war following the below instruction in "QuickStart", the hello.war_deployed wasn't generated in the "autodeploy" directory.
# Find<INSTALL_DIR>/samples/quickstart/hello.war.
# Copy it to <INSTALL_DIR>/domains/domain1/autodeploy/
Anybody knows why?
Thanks.

Hai
I have installed Sun Java System Application Server 8
I am able to create Application, Bean component, Appclient Client.
But i dont know where to provide the JNDI name
JNDI tab s'd be there for the Application(any)
I have three tabs(default tabs), JNDI tab is not appearing
I am following the J2EE1.4 pdf document
tell me how to provide the JNDI name for any application
Please do the favour

Some question for Sun Java System

Dear all:
I use Sun Java System We Server 7.0 for my project.
But I have some question on SJSWS 7.0
My server runtime information
1. OS is RedHat Enterprise 3
2. memory: 2G
3. SJSWS version: 7.0 preview 3
My questions
Q1. The speed that download image is slower than the speed that run JSP page . The image's size to smaller than 5 KB. Is it possible to speed up download image
Q2. My machine has 2GB memory, The system use swap area always. I think it isn't enough of SJSWS 7.0. How much memory size that SJSWS 7.0?
Many thank for everybody

first off, please try the Update 1 release in stead of technology preview releases: http://www.sun.com/download/products.xml?id=467713d6
Q1> So I want to ask it is possible to display image and text at the same time like use Tomcat ?
there is nothing in the server end (whether it's Tomcat or any other web server) that affects how the content is displayed on the browser.
Q2>I detect The ram was used over 800M~1G by SJSWS7. My website has 80~150 user in workinghour
Are you seeing Web Server process measuring so much memory?
Q3> Is it possible that the admin server use SJSWS7U1 and some or all of node use SJSWS preview 3, because the server is running on line, I can't stop them for update server
No - you want to switch to U1 anyway, since it's a released version (and is absolutely FREE for production use).

MSSQL server as data store for SUN Java system Identity server 6.1

Hi,
I am a new user to SUN java system Identity server 6.1. Can we use RDBMS such as MSSQL server as a datastore for IS?
if so, what is the configuration that needs to be done on IS 6.1?
Thanks in advance,
Srinivaas.

Hello All,
Waiting for any idea for the long time. I am trying again and again by restoring my directory server zone. I have two whole root zones one i am using for sun portal and communication suite 5 and other is for directory server. They are working fine. but when i try to install the Sun Java System Identity Synchronization for Windows 6.0 on directory server zone. Some time it hangs at 97% while installing core and some time it giving error the installer cannot upload some entries in the template this error comes when i restore my directory server zone.
Can some please give me idea why it giving these error on solaris zone.
Thanks in Advance,
Sikander

Is this bugs for Sun Java System Portal Server 6 2005Q4 (errorStoreDP) ?

Hi,
I installed Sun Java System Portal Server 6 2005Q4 under window xp environment.
I used the following command to deploy war file, it worked for me (because I setup enough services and role for amadmin user), deploy/undeploy was worked very well for me.
pdeploy deploy -u amadmin -w amAdminPassword -g -p
amAdminPassword -v portletsamples.war
Two months later, I did not change anything (configuration) within the two months.
I use the same deploy/undeploy command to deploy war file again, I got the following error =>
errorStoreDP (sms-UNKNOWN_EXCEPTION_OCCURRED)
Message:The user does not have permission to perform the operation.
Why this condition happened ? is this bugs for sun portal server ?
I uninstall this sun portal server and reinstall it again, I still got
the same error message. why ?
But funny thing is that I format my machine, then install window xp and
install System Portal Server 6 2005Q4 again, then it works for me again.
is this reasonable ?
I really don't know why ?
Can someone help me ?
Thanks!

Hello,
It seems you are really asking how you should design your application to use portlets.
Your approach now seems to be that you would just copy your servlets to portlets. You can use the PortletRequestDispatcher to include content from your servlet. See http://portals.apache.org/pluto/multiproject/portlet-api/apidocs/javax/portlet/PortletRequestDispatcher.html
I also found the following discussion on this topic http://www.mail-archive.com/[email protected]/msg00481.html
But I don't think I'd recommend that approach for your application. How would you maintain the application going forward? You will have both servlets and portlets to maintain when you change the applicaiton. I assume you will be keeping the servlet application and using it also? Do you want the portlet content to match the servlet content always, or will they display differently?
Instead, what you might consider an model-view-controller approach and designing a web service (the model) for both applications (servlet and portlet, views) to consume.
As for the basics of porlet applications, the JSPPortlet will use JSPs for presentation of hte portlet content. GenericPortlet is the default implementation of the Portlet interface. Implementing the portlet interface means you must write the implementation yourself. Here are a couple of good tutorials to get you started on the Portlet spec:
http://www.javaworld.com/javaworld/jw-08-2003/jw-0801-portlet.html
http://www.javaworld.com/javaworld/jw-09-2003/jw-0905-portlet2.html
Also there is this JSE tutorial, but I don't know how current it is:
http://developers.sun.com/prodtech/portalserver/reference/techart/portlets.html
Hope that helps.

How can I use Servlets on Sun Java System WebServer 6.1

Hi
This is Khurram,
I have just downloaded, and installed "Sun One Java System Web Server 6.1" on WindowsXP. This is installed and working properly on my system. But I want to use Servlet technology on this server, even I did download it just for working on servlets. Before it, I was using typical JavaWebServer2.0 for this purpose.
Any ways.
Can any one tell me, how can I do this on "Java System Web Server 6.1".
Thanks
any help will be appriciated
regards
Khurram

Thanks for your such action.
Actually I have installed it since 2 days, and have read throughly the documentation of WebServer, But Only the Link for this purpose is provided "Programmer's Guide to Web Applications", Now I have just searched for it and found only "Programmer's Guide" .PDF format. I have just read it out now, But here also provided a small refference to see "Programmer's Guide to Web Applications". Now I have just the problem that where to find it.
Please, tell me if you have some solution to my problem
or atleast tell me where to find the refference "Programmer's Guide to Web Applications". I tried but only found "Programmer's Guide" for Sun Web Server 6.1.
Thanks any way to give some time.
Khurram

CF 8 Multiserver & Sun Java System Webserver 7

I am looking for information on how to connect SJSWS 7
virtual web servers to individual ColdFusion 8 instances running in
a multiserver environment.

The package should be available on this website in the"Oracle Fusion Middleware" product list :
https://edelivery.oracle.com/
If you cannot found it, please open a service request on MOS and set this one as non-technical request.

Sun Java System Portal Server 7 for windows ?

Hi all,
Has any one found the download link for
Sun Java System Portal Server 7 .
Please send me the link.
nJoy
~Neeraj Sidhaye
[email protected]

http://www.sun.com/download/index.jsp?cat=Portal%20Services&tab=3&subcat=Portal%20Server
Supported Platforms
Sun comparable workstation or server (SPARC or x86 that runs Solaris OS or Red Hat Enterprise Linux)
Operating Systems and Platforms
Solaris 10 OS for SPARC and x86 platforms, including Zones support
Solaris 9 OS for SPARC and x86 platforms
Solaris 8 OS for the SPARC platform
Red Hat Enterprise Linux WS/AS/ES 2.1 to 2.1U6
Red Hat Enterprise Linux WS/AS/ES 3.0 to 3.0U4
Windows 2000, XP, AS
Windows 2003, XP, AS
HP-UX 11i
System Requirements
Memory: 1.5 GB of RAM for evaluation install
2-3 GB of RAM for minimal deployment
Virtual Memory: 4 GB
Disk Space: 3 GB of disk space for Java System Portal Server and associated applications

How do I use a JDBC Resource set-up in Sun Java System Appliation Server?

How do I use a JDBC Resource set-up in Sun Java System Appliation Server 8.2?
I created a JDBC Resource labeled "jdbc/__PetroPool" that is backed by a Connection Pool labeled "PetroPool".
Since this is set-up in Sun Java System Appliation Server 8.2, I am looking for suggestions, examples or guides on how I can use this connection.
I've been browsing the developer's guide for Sun Java System Appliation Server 8.2 without much luck.
Googling really doesn't provide a lot of useful information either...
Any suggestions, examples or guides on how I can use this connection is greatly appreciated.
Thanks,
--Todd

How do I use a JDBC Resource set-up in Sun Java System Appliation Server 8.2?
I created a JDBC Resource labeled "jdbc/__PetroPool" that is backed by a Connection Pool labeled "PetroPool".
Since this is set-up in Sun Java System Appliation Server 8.2, I am looking for suggestions, examples or guides on how I can use this connection.
I've been browsing the developer's guide for Sun Java System Appliation Server 8.2 without much luck.
Googling really doesn't provide a lot of useful information either...
Any suggestions, examples or guides on how I can use this connection is greatly appreciated.
Thanks,
--Todd

Sun Java System Application Server installation location on windows

Hi there...
I'm just doing the "Your First Cup: An Introduction to the Java EE Platform" tutorial for the first time. I'm trying to add the Sun Java System Application Server in NetBeans IDE. It's asking me to select the Platform Location, and I have no idea where that is. No help instructions I've found say where it normally gets installed, and I've found now mention of it on the web.
Can anyone tell me the location where this is supposed to be located? I HAVE installed the Java EE SDK 5 for Windows. The location it offers as a default is "C:\Program Files\glassfish-v2ur2\", but there is a red message at the bottom of the dialog that reads "Provide a valid Application Server Installation Location for 'Sun Java System App...". The Register Local Default Domain drop-down box has not options to select, either.
I would try and search some more, but I just don't know what to search for. If anyone can offer any insight into this, I appreciate it.
Thanks a ton!!!
Orion Carrier

I`ve posted a shorter version of the question in the hopes of getting a timely answer. Thanks

Sun Java System Messaging Server - necessary components

People, prompt: for Sun Java System Messaging Server besides ldap, what is necessary?

Hi,
What is it you want to do with your messaging server installation? If you don't want UWC access (i.e. IMAP/POP access only) then Messaging Server is all you need (along with an LDAP server which may or may not be installed on the same system). A mail-relay system for example requires very little, in fact during configuration you can disable the store to leave MTA functionality only.
Shane.

Any difference between Sun Java System Web Server - Update 1 and update 2

Any configuration changes need to be made particularly for Sun Java System Web Server - Update 2 in the load balancing. because i face issue in load balancing with Sun Java System Web Server - Update 2 , but load balancing is working fine with Sun Java System Web Server - Update1

using Sun Java System Web Server - Update 2 as forward proxy. and here is my obj.conf file entries
# Copyright 2006 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# You can edit this file, but comments and formatting changes
# might be lost when you use the administration GUI or CLI.
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="ntrans-j2ee" name="j2ee"
NameTrans fn="pfx2dir" from="/mc-icons" dir="C:/Program Files/Sun/WebServer7/lib/icons" name="es-internal"
PathCheck fn="uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index-j2ee"
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"
ObjectType fn="type-j2ee"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
Error fn="error-j2ee"
AddLog fn="flex-log"
</Object>
#this line was added for weblogic clustering
<Object name="webapp" ppath="*/webapp/*">
Service fn=wl_proxy WebLogicCluster="ip:7002,ip:7003"
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi"
</Object>
<Object name="send-precompressed">
PathCheck fn="find-compressed"
</Object>
<Object name="compress-on-demand">
Output fn="insert-filter" filter="http-compression"
</Object>
<Object name="tunnel" ppath="*/HTTPClnt*">
Service fn=wl_proxy WebLogicCluster="ip:7002,ip:7003"
</Object>

Unable to download Sun Java System Identity Synchronization for Windows

Please any one can help me How can i download Sun Java System Identity Synchronization for Windows
* Sun Java System Directory Server ---------------------able to download
* Sun Java System Directory Proxy Server --------------able to download
* Sun Java System Identity Synchronization for Windows-------------Not able to download
* Sun Java System Directory Editor------------------------able to download
* Sun Java System Directory Server Resource Kit------able to download
Regards
kamal

ISW is already present in the 5.2p4 and 5.2p6 archives.
dn: cn=pswsync,cn=plugins,cn=config
objectClass: top
objectClass: nsSlapdPlugin
objectClass: ds-signedPlugin
objectClass: extensibleObject
cn: pswsync
nsslapd-pluginPath: /export/home/abc/local/ds52p6/lib/psw-plugin.so
nsslapd-pluginInitfunc: pswsync_init
nsslapd-pluginType: preoperation
nsslapd-pluginEnabled: off
creatorsName: cn=server,cn=plugins,cn=config
modifiersName: cn=server,cn=plugins,cn=config
createTimestamp: 20090121011643Z
modifyTimestamp: 20090121011643Z
nsslapd-pluginId: Identity Sync for Windows
nsslapd-pluginVersion: 5.2_Patch_6
nsslapd-pluginVendor: Sun Microsystems, Inc.
nsslapd-pluginDescription: Identity Synchronization for Windows Plug-In

Sun Java System Application Server for Mac OS X ?

hi everybody.
does anybody know if (any given date ?) sun is planning to offer a distribution of its sun java system application server for mac os x ? or even better: any ideas on how to install a currently available version on mac os x 10.4 ? the linux bin seems not to be readable.
thank you very much in advance, folks.
and have a nice day
andre from berlin, germany

As you noticed, standalone MacOS distribution of application server is currently not available, but what you can do is to download NetBeans with J2EE bundle or Creator (for free) and install bundled Application Server on this platform. Download URLs are:
http://www.netbeans.info/downloads/download.php?type=4.1
(NetBeans/J2EE cobundle)
http://developers.sun.com/prodtech/devtools/free/
(Creator)
Also, you can install and run Glassfish (which is open-source version of upcoming Application Server 9.0) on MacOS X:
http://java.sun.com/javaee/glassfish/getit.jsp

Php plugin 1.0 for sun java system webserver

Similar Messages

Maybe you are looking for