Php update/configure for Server 4.0
I had working Apache2 + PHP 5.6 running perfectly locally for development.
Web Docs were located in /Sites folder in user directory.
After Installing Server 4.0 all my setup is messed up. I can configure website again but it not uses PHP I have upgraded to.
I feel lack of control/configuration for web apps with Server 4.0. How I can get it working back as perviously or uninstall Server 4.0?
Filip
I have found solution to fix Apache after uninstallation of Server 4.0
http://remonpel.nl/2014/08/restore-apache2-service-after-removal-of-server-app/# more-554
I found also more articles that maybe would help me running my websites with OS X Server.... but for now I have decided to not come back to try this.
http://remonpel.nl/
Similar Messages
-
Need hardware configuration for server
Hi All,
Need server hardware configuration for deploying and maintaining SSAS cube. Consider OLTP size as 100 GB
Thanks,
ATRSAMSHi Atrsams,
According to your description, you need some hardware recommendations for deploying and maintaining a SQL Server Analysis Services cube, right?
Though this isn't a sizing recommendation, I'd encourage you to buy as much memory as you can afford. This is generally the choke point I've seen on servers, especially when using SSAS. For the detail information about it, please refer to the links below.
http://sqlblog.com/blogs/marco_russo/archive/2013/02/12/hardware-sizing-guide-for-ssas-tabular.aspx
http://www.experts-exchange.com/Hardware/Microsoft_Hardware/Q_27781248.html
Regards,
Charlie Liao
TechNet Community Support -
Schedule Updates (offline) for Server 2012 R2 .wim greyed out
I have added a new .wim file to my ConfigMgr 2012 SP1, which is a Server 2012 R2 image. But when I try to Schedule Updates it is greyed out. Anyone know why this is?
Thank you in advance.
David D.updating to
Configuration Manager 2012 R2 will allow you the ability as a new ADK (8.1) is required. This version of ADK contains the updated DISM which will allow windows updates to be injected into Windows Server 2012 R2 and Windows 8.1
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady -
Is there a plan to update Configurator for use with InDesign CC?
Hi all,
When will Configurator be available for use with InDesign CC... Is there a plan to update it in the near future to be compatible with ID CC?
Thank you so much:)
Christineshane.daley wrote:
I have recently purchased an iPad Air 2 and to increase useability purchased a Logitech +type bluetooth keyboard. I'm very happy with both but disappointed in the lack of autocorrect function between the bluetooth keyboards (not a logitech deficiancy) and iOS.
Is there a plan to fix this please?!
Is that because you also ask the same question to Logitech and that was their response, since you're using a 3rd party software -
Weblogic 10.3 configuration for serving static content
When we deploy Web Application the default document root of application will be its own root directory. If we want to have all the xml files on the disk to be in different location other than our deployment directory you can use virtual directory mapping in our Applications deployment descriptors. Below is the information on virtual directory mapping.
virtual-directory-mapping
=============================================================================
Use the virtual-directory-mapping element to specify document roots other than the default document root of the Web application for certain kinds of requests, such as image requests. All images for a set of Web applications can be stored in a single location, and need not be copied to the document root of each Web application that uses them. For an incoming request, if a virtual directory has been specified servlet container will search for the requested resource first in the virtual directory and then in the Web application’s original document root. This defines the precedence if the same document exists in both places.
Example:
<virtual-directory-mapping>
<local-path>c:/usr/gifs</local-path>
<url-pattern>/images/*</url-pattern>
<url-pattern>*.jpg</url-pattern>
</virtual-directory-mapping>
<virtual-directory-mapping>
<local-path>c:/usr/common_jsps.jar</local-path>
<url-pattern>*.jsp</url-pattern>
</virtual-directory-mapping>
Below edocs link has more information virtual directory mapping.
http://e-docs.bea.com/wls/docs103/webapp/weblogic_xml.html#wp1039396
- - TarunHi,
I have a web application deployed to one of the managed server nodes.
I need to access web application using the url http://<host>:<port>/webApp/
I dont want to use that way.
I need to access the welcome file directly without using the web application name like the one below.
http://<host>:<port>/welcome.jsp
I have read about virtual-directory-mapping and I have ran the examples which comes with weblogic installation.
I have changed the weblogic.xml that comes with my application as follows
<?xml version="1.0"?>
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web Application 8.1//EN" "http://www.bea.com/servers/wls810/dtd/weblogic810-web-jar.dtd">
<weblogic-web-app>
<virtual-directory-mapping>
<local-path>G:/Test</local-path>
<url-pattern>/*.html</url-pattern>
<url-pattern>/index.jsp</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
I have pasted fast_track.html and index.jsp to g:/Test folder.
After i restart the managed server, am still getting" 404 Page not found" error.
Kindly help.
Thanks,
Charan
Edited by: charan27 on Sep 2, 2010 8:11 AM -
How do I update Mysql for Server 10.6.8 safely
Server version is: 5.0.8
Current available seems to be : 5.5.24 community server available from http://dev.mysql.com/downloads/mysql/
if I already have several databases running under 5.0.8
what are the hazards with upgrading to 5.5.24 community server?I wouldn't expect a problem if you update MySQL from the binaries available on mysql.com. The database files located in the /var/mysql directory won't be overwritten by the application files. The only unkown is what affect it might have on the MySQL functions in Server Admin if the update files are not installed into the same directory paths as the original installation. Make sure you backup your server before you try to upgrade MySQL so you can restore the original files if something gets broken.
-
How long does apple provide updates for server software?
Hi
I've tried to find some info on hpw long apple provides security updates etc for server software, i.e what their guaranteed lifecycle is. I've havent found any answer to this allthough i'm sure it must be on apples pages somewhere.
Anyone know the answer?I can't be sure of any guarantee that Apple has but they are still releasing security updates for OS X server 10.3.9, which is now essentially a full version behind as they are up to 10.4.9 and until a week ago were on the verge of releasing 10.5.
Current downloads page shows new updates including security updates for 10.3 servers below.
http://www.apple.com/support/downloads/
Since there are no 10.2 server security updates on the downloads page I assume that they will let us get 1 full version down the line before cutting off security updates.
Hope this helps (but I bet you know much of this already). -
Hi,
I'm trying to setup the WSUS on the Server 2012 R2 Essentials (Trial Version) but with no luck. Below are the logs generated. Hopefully someone can guide me on this. Thanks.
2014-10-15 12:23:06 Postinstall started
2014-10-15 12:23:06 Detected role services: Api, UI, WidDatabase, Services
2014-10-15 12:23:06 Start: LoadSettingsFromXml
2014-10-15 12:23:06 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
2014-10-15 12:23:06 Value is true
2014-10-15 12:23:06 End: GetConfigValue
2014-10-15 12:23:06 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentDirectory
2014-10-15 12:23:06 Value is C:\WSUS
2014-10-15 12:23:06 End: GetConfigValue
2014-10-15 12:23:06 Content directory is C:\WSUS
2014-10-15 12:23:06 Database roleservice is not installed
2014-10-15 12:23:06 End: LoadSettingsFromXml
Post install is starting
2014-10-15 12:23:06 Start: Run
2014-10-15 12:23:06 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:06 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:06 Fetching WsusReportersSid from registry store
2014-10-15 12:23:06 Value is S-1-5-21-308464661-3380577483-199018475-1001
2014-10-15 12:23:19 Configuring content directory...
2014-10-15 12:23:19 Configuring groups...
2014-10-15 12:23:19 Starting group configuration for WSUS Administrators...
2014-10-15 12:23:19 Found group in regsitry, attempting to use it...
2014-10-15 12:23:22 Writing group to registry...
2014-10-15 12:23:22 Finished group creation
2014-10-15 12:23:22 Starting group configuration for WSUS Reporters...
2014-10-15 12:23:22 Found group in regsitry, attempting to use it...
2014-10-15 12:23:22 Writing group to registry...
2014-10-15 12:23:22 Finished group creation
2014-10-15 12:23:22 Configuring permissions...
2014-10-15 12:23:22 Fetching content directory...
2014-10-15 12:23:22 Fetching ContentDir from registry store
2014-10-15 12:23:22 Value is C:\WSUS
2014-10-15 12:23:22 Fetching group SIDs...
2014-10-15 12:23:22 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:22 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:22 Fetching WsusReportersSid from registry store
2014-10-15 12:23:22 Value is S-1-5-21-308464661-3380577483-199018475-1001
2014-10-15 12:23:22 Creating group principals...
2014-10-15 12:23:22 Granting directory permissions...
2014-10-15 12:23:23 Granting permissions on content directory...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Configuring shares...
2014-10-15 12:23:23 Configuring network shares...
2014-10-15 12:23:23 Fetching content directory...
2014-10-15 12:23:23 Fetching ContentDir from registry store
2014-10-15 12:23:23 Value is C:\WSUS
2014-10-15 12:23:23 Fetching WSUS admin SID...
2014-10-15 12:23:23 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:23 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:23 Content directory is local, creating content shares...
2014-10-15 12:23:25 Creating share "UpdateServicesPackages" with path "C:\WSUS\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications) published
on this WSUS system."
2014-10-15 12:23:25 Creating share...
2014-10-15 12:23:25 Share successfully created
2014-10-15 12:23:25 Creating share "WsusContent" with path "C:\WSUS\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
2014-10-15 12:23:26 Creating share...
2014-10-15 12:23:26 Share successfully created
2014-10-15 12:23:26 Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
2014-10-15 12:23:27 Creating share...
2014-10-15 12:23:27 Share successfully created
2014-10-15 12:23:27 Finished creating content shares
2014-10-15 12:23:27 Stopping service WSUSService
2014-10-15 12:23:27 Stopping service W3SVC
2014-10-15 12:23:27 Configuring WID database...
2014-10-15 12:23:27 Configuring the database...
2014-10-15 12:23:27 Establishing DB connection...
2014-10-15 12:23:27 Checking to see if database exists...
2014-10-15 12:23:28 Database exists
2014-10-15 12:23:28 Switching database to single user mode...
2014-10-15 12:23:32 Loading install type query...
2014-10-15 12:23:32 DECLARE @currentDBVersion int
DECLARE @scriptMajorVersion int = (9600)
DECLARE @scriptMinorVersion int = (16384)
DECLARE @databaseMajorVersion int
DECLARE @databaseMinorVersion int
DECLARE @databaseBuildNumber nvarchar(10)
IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
BEGIN
SELECT 1
END
ELSE
BEGIN
SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
SET @databaseBuildNumber = (SELECT BuildNumber FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
DECLARE @delimiterPosition INT = CHARINDEX('.', @databaseBuildNumber)
IF (@delimiterPosition = 0)
BEGIN
RAISERROR('Invalid schema version number', 16, 1) with nowait
return
END
SET @databaseMajorVersion = SUBSTRING(@databaseBuildNumber, 1, @delimiterPosition - 1)
SET @databaseMinorVersion = SUBSTRING(@databaseBuildNumber, (@delimiterPosition + 1), (10 - @delimiterPosition))
IF @currentDBVersion < 926
BEGIN
SELECT 3
END
ELSE
BEGIN
IF (@scriptMajorVersion > @databaseMajorVersion OR
(@scriptMajorVersion = @databaseMajorVersion AND @scriptMinorVersion > @databaseMinorVersion))
BEGIN
SELECT 2
END
ELSE IF (@scriptMajorVersion = @databaseMajorVersion AND
@scriptMinorVersion = @databaseMinorVersion)
BEGIN
SELECT 0
END
ELSE
BEGIN
SELECT 4
END
END
END
2014-10-15 12:23:32 Install type is: Reinstall
2014-10-15 12:23:32 Creating logins...
2014-10-15 12:23:32 Fetching account info for S-1-5-20
2014-10-15 12:23:32 Found principal
2014-10-15 12:23:32 Found account
2014-10-15 12:23:32 Got binary SID
2014-10-15 12:23:35 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:35 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:35 Fetching account info for S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:35 Found principal
2014-10-15 12:23:35 Found account
2014-10-15 12:23:35 Got binary SID
2014-10-15 12:23:35 Setting content location...
2014-10-15 12:23:35 Fetching ContentDir from registry store
2014-10-15 12:23:35 Value is C:\WSUS
2014-10-15 12:23:40 Swtching DB to multi-user mode......
2014-10-15 12:23:47 Finished setting multi-user mode
2014-10-15 12:23:47 Writing DB settings to registry...
2014-10-15 12:23:47 Marking PostInstall done for UpdateServices-WidDatabase in the registry...
2014-10-15 12:23:47 Starting service W3SVC
2014-10-15 12:23:47 Configuring IIS...
2014-10-15 12:23:47 Start: ConfigureWebsite
2014-10-15 12:23:51 System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_AdsObject()
at System.DirectoryServices.PropertyValueCollection.PopulateList()
at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
at Microsoft.UpdateServices.Administration.UseCustomWebSite..ctor()
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
Fatal Error: The system cannot find the path specified.2014-10-15 12:23:47 Start: ConfigureWebsite
2014-10-15 12:23:51 System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.
Looks like it failed trying to setup the website.
2014-10-15 12:23:27 Configuring WID database...
2014-10-15 12:23:27 Configuring the database...
2014-10-15 12:23:27 Establishing DB connection...
2014-10-15 12:23:27 Checking to see if database exists...
2014-10-15 12:23:28 Database exists
This also looks like its a RE-installation of WSUS.
Any chance the "WSUS Administration" v-root is already present and did not get deleted after the last uninstallation?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Error starting Portal or Commerce Server when Configured for Oracle
I've been attempting to configure Portal 4.0 to work with Oracle. I'm running Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic Portal for
Oracle Databases". Specifically, I setup the tablespaces, connection pools and successfully
run the scripts to populate the tables. I am confident the Oracle OCI driver is configured
properly (have done this many times). However, after I make all of the necessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading configuration file .\config\wlcsDomain\config.xml
..> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. I tried a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point to my instance
of Oracle (are their additional things I need to load in Oracle to support it using
the RDBMS realm). Is there a way I can disable the security realm to at least get
the server up-and-running (via the web.xml). I've installed and reinstalled many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeffI finally found this bug in the release notes, i'm surprised one of the bea guys couldn't
answer this....
"Mike Friesen" <[email protected]> wrote:
>
I had the same type of problem with portal 4.0. Trying downloading the
newest 7.0, I found it works much better.
Mike
"K C" <[email protected]> wrote in message news:[email protected]...
I found this as well. However, i still am not able to run the portal afterconfiguring
for oracle. While running create_all, i get many errors like "can binda
LONG value
only for insert into a LONG column"
the table are being created, this appears to occur in the "insertingrequired bootstrap
data" phase.
thanks
"Joshua Davies" <[email protected]> wrote:
You probably followed the instructions too closely. I had the same
problem,
due to
something that's not quite a "bug" in the installation instructions.Look
back at
the section "Update Settings for the RDBMS Security Realm" in thedeployment
guide
(http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm#1039294).
In the table in step 2, they show the URL on top, and the Driverclassname
underneath
it. HOWEVER... on the actual data screen, the Driver is on top and the
URL is underneath
it. If you're not being very very careful, it's easy to swap thesetwo
values
and put the URL in the Driver input box and the Driver in the URL input
box. Make
sure you haven't accidentally done this; if you have, you can stillchange
this in
the config.xml file (do a text search for an element RDBMSRealm withan
"name" attribute
of "wlcsRealm").
Verify that it looks like this:
<RDBMSRealm DatabaseDriver="weblogic.jdbc.oci.Driver"
DatabaseURL="jdbc:weblogic:oracle"
Name="wlcsRealm"
and not this:
<RDBMSRealm DatabaseDriver="jdbc:weblogic:oracle"
DatabaseURL="weblogic.jdbc.oci.Driver"
Name="wlcsRealm"
Very subtle gotcha...
"Jeff Davis" <[email protected]> wrote:
I've been attempting to configure Portal 4.0 to work with Oracle. I'm
running
Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic
Portal for
Oracle Databases". Specifically, I setup the tablespaces, connectionpools
and successfully
run the scripts to populate the tables. I am confident the Oracle OCIdriver
is configured
properly (have done this many times). However, after I make all of thenecessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading
configuration
file .\config\wlcsDomain\config.xml
...> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable toinitialize
the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. Itried
a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point
to my instance
of Oracle (are their additional things I need to load in Oracle tosupport
it using
the RDBMS realm). Is there a way I can disable the security realm toat
least get
the server up-and-running (via the web.xml). I've installed andreinstalled
many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff -
Vhost configuration for Adobe Media Server running under linux.
Please help me with Vhost configuration for Adobe Media Server running under linux.
I was running a media sharing website for which I wanted to use Adobe Media Server.
To use, AMS, I disabled the already installed Apache server and installed AMS along with the built in Apache server. I could successfully install AMS and could login to AMS Admin Console through my IP number.
My existing website, www.mydomain.com is having its contents located at:
/home/mydomain/public_html
(Directory created under the old version of Apache not bundled with AMS)
Users will be uploading their videos, which will get transcoded and will be delivered to the website visitors in the existing scenario.
To use this website with AMS, this is what I did:
I created a folder for my domain, www.mydomain.com as below
/opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
Copied Application.xml and Vhost.xml from /opt/adobe/ams/conf/_defaultRoot_/ and pasted them in /opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
In the Application.xml file there are 2 entries:
<Alias name="mydomain.com"></Alias>
<AppsDir>${/home/mydomain/public_html}</AppsDir>
Please help me with further steps to be completed:
Do I need to create a separate VirtualHost entry in the Apache installed with AMS?
If yes, can I specify already existing document root for my website (/home/mydomain/public_html) or do I need to create a separate folder under webroot/Apache ?
If yes to point 2 above, then do I need to copy all the existing contents from /home/mydomain/public_html to the newly created folder ?
I hope, I can serve all my static contents like html pages and php and media like video/audio. In that case do I need create alias to my Media/Alias folder or AMS will automatically start streaming when a video/audio is requested ?
What other steps do i need to complete?
Any help in this regard would be highly appreciated.
Thanks and RegardsDear sir or madam,
Here is Letswin Technology, which specializes in global servers, web hosting, VPS, VPNj. If anything I can do for you, pls contact us!
Have a nice day! -
Server Update Wizard for Unity 7
I can't seem to find any documentation on this, but I'm basically looking for best practices when running the server update wizard.
For example, should I run the update wizard on the failover server first with the "automatic failover and failback" and "file replication" disabled?
Any info is appreciated. Thanks.If you have a Unity failover setup with automatic failover configured, then you could safely install updates on the Primary server and allow failover/failback to work as configured. In this manner, Unity will failover when the server reboots and failover when the server is back online and services are up. Then when you update the failover server, it just requires install/reboot - i.e., all else is operating normally. The process can be done in the reverse as well. Update backup first, then primary.
As far as best practice is concerned, this is probably flexible since the SUW is usually a pretty benign process. The best practice would be to perform during off-hours when call volume is low. You shouldn't need to tweak any failover/failback settings as long as you're operating during an approved window.
Hailey
Please rate helpful posts! -
Configuring Lync Server 2013 to be a partner Application for Exchange 2013
Hello Guys,
I just want to share my experience while configuring Lync server 2013 to be a partner Application for exchange 2013 sever.
As mentioned on technet you need to run Configure-EnterprisePartnerApplication.ps1 script that ships with Exchange 2013.
But when I tried to run the script as described on the technet article, I found it always fails with " the accepted domain is not valid"
I have checked my accepted domains many times and i found that there's no issues with my configured accepted domain.
So I started to review the script to find the issue and I found that the script was configured as below
$acceptedDomains = Get-AcceptedDomain ;
if ($acceptedDomains -eq $null)
WriteError ("There is no accepted domain so user can not be created.")
$acceptedDomain = $acceptedDomains[0].Name;
if($UseDomainController -eq $true)
$user = New-MailUser -Name $username -DomainController $DomainController -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true -DomainController $DomainController
else
$user = New-MailUser -Name $username -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true;
which is totally wrong as below:
firstly it makes $AcceptedDomain variable to equal the Name of the accepted domain.
Not all customers configure the name of the Accepted Domain to be the Domain Name.
Secondly it makes $AcceptedDomain variable to equal the name of the first Accepted Domain.
The first domain may be not the default Accepted Domain.
So I have configured the script as below
$acceptedDomains = Get-AcceptedDomain | ? {$_.Default -eq "True"} ;
if ($acceptedDomains -eq $null)
WriteError ("There is no accepted domain so user can not be created.")
$acceptedDomain = $acceptedDomains.DomainName;
if($UseDomainController -eq $true)
$user = New-MailUser -Name $username -DomainController $DomainController -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true -DomainController $DomainController
else
$user = New-MailUser -Name $username -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true;
I hope This help.
Thanks
Ahmed FouadHi,
This is helpful, thanks for sharing.
Best regards,
Belinda Ma
TechNet Community Support -
Financial Reporting Studio 11.1.2.1 PDF not Configured for Web Server
I have installed EPM 11.1.2.1, and HFM, Planning, Essbase, Financial Reporting are all working fine except when I do a report preview in the Workspace an error is received that PDF has not been configured for this Web Server.
I have uninstalled PDF and Financial Reporting then re-installed them but I am still getting the same error. Also, I when I tried to view report from Workspace in Financial Reporting Studio, I received the following error:
error number 400 Error Description:Form already displayed; can't show modally. Function: ShowMsg. Module:GblMethods.
Your help would be gracefully appreciated.You should review all installation guides, readmes, and the certification matrix before performing a Hyperion Installation and/or Upgrade.
Version 9.0 of Ghostscript is not supported, install ghostscript 8.6.3 - 32-bit.
From the 11.1.2.1 Certification Matrix: "Either: --Adobe Acrobat Distiller Server 8.0 or 6.0 --GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6"
From the 11.1.2.1 Installation Guide Page 110: "Ensure that a supported 32-bit version of Ghostscript is installed."
See http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf
Regards,
John A. Booth
http://www.metavero.com -
HI,
I have installed Cumulative Update 12 for SQL Server 2008 R2 SP2 on my SharePoint instances. This was to resolve a known issue faced with the instance. CU12 helped resolve the issue. My company is rather strict regarding security hotfixes. But I am
not sure if this particular hotfix [Security Hotfix (KB2977319)] is required if the instance has CU12 applied.
Tested this on a Lab server, the installation did run fine, the summary log also stated that the KB is applied. But the Build Number did not change. Hence the doubt.
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Exit message: Passed
Start time: 2014-09-06 10:31:21
End time: 2014-09-06 10:55:49
Requested action: Patch
Instance SPNTSQLTRN overall summary:
Final result: Passed
Exit code (Decimal): 0
Exit message: Passed
Start time: 2014-09-06 10:48:08
End time: 2014-09-06 10:55:45
Requested action: Patch
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 2
KBArticle: KB2977319
KBArticleHyperlink: http://support.microsoft.com/?kbid=2977319
PatchType: QFE
AssociatedHotfixBuild: 0
Platform: x64
PatchLevel: 10.52.4321.0
ProductVersion: 10.52.4000.0
GDRReservedRange: 10.50.4001.0:10.50.4199.0;10.50.4200.0:10.50.4250.0
PackageName: SQLServer2008-KB2977319-x64.exe
Installation location: e:\ac2af22d88ee645b5b32b5c178\x64\setup\
Please inform if I need to apply the hotfix on CU12. Thanks in advance.
John SYes you must install Security update mentioned in KB 2977319 it is important for SQL Server to be patches with this security update. Without this it could allow an attacker to compromise your system and gain control over it.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
I have update my primary server with cu2. Rebooted it when requested. Now everything appears to work except Application Catalog. I am getting HttpSendRequestSync failed errors in sms_awebsvc_control_manager and SMS_MP_CONTROL_MANAGER. Permissions
for the temp folder and the 2 service folders do have local service and system with full control. I reregistered .net 4 with aspnet_regiis -i -enable. Rebooted and no change. application pool is running. The install logs said it is
working. SQL is happy. I have reinstalled the two Application Catalog service points varous ways and they always come back with warm fuzzy logs stated they installed.
When someone tries to use Application Catalog the ServicePortalWebSite.log always produces the following errors:
[15, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[15, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[15, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[16, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[16, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[16, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[16, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/default.aspx, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Got 5.0.7958.1000 build version
[11, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[11, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[11, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[7, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[7, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[7, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[11, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetMobileApplicationValuesForProperty for property:Category, filter None
[11, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[15, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[15, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[15, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[11, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[11, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[15, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetApplications, startItem = 0, search text = ''
[7, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetMobileApplicationValuesForProperty for property:Category, filter None
[7, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[15, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[7, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[7, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[15, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[15, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[11, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)System.Net.WebException: The remote server returned
an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[11, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetApplicationValuesForProperty(ApplicationProperty propertyName, String reserved)System.Net.WebException: The remote server returned an error: (500) Internal Server
Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[7, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)System.Net.WebException: The remote server returned
an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[7, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 1
Any feedback is appreciated.
Mike In VancouverThe following repeats hourly since installing Cumulative Update 2 in the log awebsctl.log:
Completed the AWEBSVC availability check against local computer.
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 5:09:45 AM
4436 (0x1154)
Waiting for changes for 60 minutes SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 5:09:45 AM 4436 (0x1154)
Timed Out... SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Starting certificate maintenance... SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Certificate (0x3adbdab0) is Exportable SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Successfully granted permission to certificate
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
Successfully completed certificate maintenance
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
SSL is not enabled. SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
Health check request failed, status code is 500, 'Internal Server Error'.
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
STATMSG: ID=8100 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AWEBSVC_CONTROL_MANAGER" SYS=server.site.com SITE=ABC PID=3000 TID=4436 GMTDATE=Tue Sep 23 13:09:45.600 2014 ISTR0="500" ISTR1="Internal Server Error"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
Completed the AWEBSVC availability check against local computer.
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
Waiting for changes for 60 minutes SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Mike In Vancouver
Maybe you are looking for
-
Can anyone tell me why my new macbook air reboots overnight?
If I leave my macbook air on overnight (so I can complete a timemachine backup) I find that when I get up in the morning my mac has rebooted! I have checked my preferences, in the battery section, under schedule, and I do not have a scheduled reboot
-
I've got nothing(gray screen, question mark folder) Please Help!
This problem is on my girlfriend’s computer, about the same as mine, PB G4 800mhz 768mb RAM, 10.4.x I am a competent user and this one has me worried… Problem Last night she goes to the computer sends an IM checks her e mail, watch some tv, goes back
-
[SOLVED] ff4: Thunderbid doesn't open email links in ff anymore
Hi guys, I used to have thunderbird open links with firefox but after the today update to firefox 4 the links on Thunderbird emails aren't opened anymore with Firefox. Basically, when I click on a link of thunderbird nothing happens.. Any idea? Thank
-
Sony XAVC files from F55 no longer play back at all and cause glitches since update today - 13th Dec
Hi, Since updating Premiere today any Sony XAVC files I have in my projects no longer play back and cause fairly big glitches. All was completely fine yesterday before I updated. Does anyone have any info on this? Hoping for a fairly quick patch as i
-
I just edited1hour of video and auto saved and manual saved, than my program crashed and I can't find my video. How do I find my video in auto save and what causes the progrm to crash? This is the second time it crashed.