Php4 from AUR
Hello, I get the following message while I try to compile php4 from aur.
checking for Apache 2.0 handler-module support via DSO through APXS...
Sorry, I cannot run apxs. Possible reasons follow:
1. Perl is not installed
2. apxs was not found. Try to pass the path using --with-apxs2=/path/to/apxs
3. Apache was not built using --enable-so (the apxs usage page is displayed)
The output of /usr/sbin/apxs follows:
cannot open /home/httpd/build/config_vars.mk: No such file or directory at /usr/sbin/apxs line 218.
configure: error: Aborting
make: *** No targets specified and no makefile found. Stop.
The package version is php4 4.3.11-1. I'll be grateful for any suggestions.
Thanks in advance. M.
I just removed
--with-pgsql=shared --with-pgsql-sock=/tmp/pgsql.sock
and it worked. Strange.
Similar Messages
-
Can't get ET to work after building from AUR
I have downloaded Enemy Territory tar from AUR and am trying to build it, here is what I am getting:
bobby@dabox:~/installs/enemy-territory$ ls
enemy-territory.desktop et-ded et-pbupdate.sh PKGBUILD
enemy-territory.install etded.sh et.sh
bobby@dabox:~/installs/enemy-territory$ makepkg
==> Entering fakeroot environment
==> Making package: enemy-territory 2.60b-8 (Tue Jan 8 14:44:27 EST 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading et-linux-2.60.x86.run
--14:44:28-- http://ftp.games.skynet.be/pub/wolfenstein/et-linux-2.60.x86.run
=> `et-linux-2.60.x86.run'
Resolving ftp.games.skynet.be... 195.238.1.6
Connecting to ftp.games.skynet.be|195.238.1.6|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 270,965,248 (258M) [text/plain]
89% [============================================> ] 241,461,216 458.72K/s ETA 01:03^100%[==================================================>] 270,965,248 467.87K/s ETA 00:00
14:54:12 (453.47 KB/s) - `et-linux-2.60.x86.run' saved [270965248/270965248]
-> Downloading ET-2.60b.zip
--14:54:15-- http://ftp.gwdg.de/pub/misc/ftp.idsoftware.com/idstuff/et/ET-2.60b.zip
=> `ET-2.60b.zip'
Resolving ftp.gwdg.de... 134.76.12.3
Connecting to ftp.gwdg.de|134.76.12.3|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4,143,401 (4.0M) [application/zip]
100%[==================================================>] 4,143,401 326.94K/s ETA 00:00
14:54:36 (201.11 KB/s) - `ET-2.60b.zip' saved [4143401/4143401]
-> Found enemy-territory.desktop in build dir
-> Found et-ded in build dir
-> Found et-pbupdate.sh in build dir
-> Found et.sh in build dir
-> Found etded.sh in build dir
==> Validating source files with md5sums
et-linux-2.60.x86.run ... Passed
ET-2.60b.zip ... Passed
enemy-territory.desktop ... Passed
et-ded ... Passed
et-pbupdate.sh ... Passed
et.sh ... Passed
etded.sh ... Passed
==> Extracting Sources...
==> Starting build()...
Creating directory enemy-territory
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.60 Full Install..............................................................................................................................................................................................................................................................................................................................
[b]cp: cannot stat `Enemy Territory 2.60b/linux/et.x86': No such file or directory
cp: cannot stat `Enemy Territory 2.60b/linux/etded.x86': No such file or directory[/b]
==> Removing info/doc files...
==> Compressing man pages...
==> Stripping debugging symbols from libraries...
==> Stripping symbols from binaries...
==> Generating .FILELIST file...
==> Generating .PKGINFO file...
==> Copying install script...
==> Compressing package...
==> Finished making: enemy-territory (Tue Ja
I have bolded those 2 lines as when I try to run enemy-territory after finishing, I keep getting this:
bobby@dabox:~$ enemy-territory
/usr/bin/enemy-territory: line 6: /opt/enemy-territory/et.x86: No such file or directory
/usr/bin/enemy-territory: line 6: exec: /opt/enemy-territory/et.x86: cannot execute: No such file or directory
bobby@dabox:~$colbert wrote:So this cannot work since it is trying to use a .zip? But others have gotten this to work, I don't understand?
It was caused by the upgrade of the file package. -
I can't install lib32-boost-libs from AUR
I am trying to install Plex Media Server from AUR and one of the dependencies is lib32-boost-libs, but when I try and install it I get an error. How can I fix this?
==> lib32-boost-libs dependencies:
- lib32-bzip2 (already installed)
- lib32-zlib (already installed)
- lib32-gcc-libs (already installed)
- icu (already installed)
- python (already installed)
- python2 (already installed)
- bzip2 (already installed)
- lib32-zlib (already installed)
- openmpi (already installed)
- gcc-multilib (already installed)
==> Continue building lib32-boost-libs ? [Y/n]
==> ------------------------------------------
==>
==> Building and installing package
==> Making package: lib32-boost-libs 1.47.0-1 (Tue Jan 3 12:33:08 MST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading boost_1_47_0.tar.gz...
--2012-01-03 12:33:08-- http://downloads.sourceforge.net/sourceforge/boost/boost_1_47_0.tar.gz
Resolving downloads.sourceforge.net... 216.34.181.59
Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://downloads.sourceforge.net/project/boost/boost/1.47.0/boost_1_47_0.tar.gz [following]
--2012-01-03 12:33:18-- http://downloads.sourceforge.net/project/boost/boost/1.47.0/boost_1_47_0.tar.gz
Reusing existing connection to downloads.sourceforge.net:80.
HTTP request sent, awaiting response... 302 Found
Location: http://superb-dca2.dl.sourceforge.net/project/boost/boost/1.47.0/boost_1_47_0.tar.gz [following]
--2012-01-03 12:33:18-- http://superb-dca2.dl.sourceforge.net/project/boost/boost/1.47.0/boost_1_47_0.tar.gz
Resolving superb-dca2.dl.sourceforge.net... 209.61.193.20
Connecting to superb-dca2.dl.sourceforge.net|209.61.193.20|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 55798639 (53M) [application/x-gzip]
Saving to: `boost_1_47_0.tar.gz.part'
100%[=====================================================================================================================>] 55,798,639 322K/s in 2m 36s
2012-01-03 12:35:58 (350 KB/s) - `boost_1_47_0.tar.gz.part' saved [55798639/55798639]
==> Validating source files with md5sums...
boost_1_47_0.tar.gz ... Passed
==> Extracting Sources...
-> Extracting boost_1_47_0.tar.gz with bsdtar
==> Starting build()...
/tmp/yaourt-tmp-jason/aur-lib32-boost-libs/./PKGBUILD: line 38: ./build.sh: Permission denied
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build lib32-boost-libs.
==> Restart building lib32-boost-libs ? [y/N]
==> -----------------------------------------
==>Raynman wrote:My guess: you have /tmp mounted with 'noexec'.
It was, but I took noexec out. After I rebooted and tried to install lib32-boost-libs I got a very similar error
==> Continue building lib32-boost-libs ? [Y/n]
==> ------------------------------------------
==>
==> Building and installing package
==> Making package: lib32-boost-libs 1.48.0-1 (Thu Jan 5 13:34:17 MST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading boost_1_48_0.tar.gz...
--2012-01-05 13:34:17-- http://downloads.sourceforge.net/sourceforge/boost/boost_1_48_0.tar.gz
Resolving downloads.sourceforge.net... 216.34.181.59
Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://downloads.sourceforge.net/project/boost/boost/1.48.0/boost_1_48_0.tar.gz [following]
--2012-01-05 13:34:32-- http://downloads.sourceforge.net/project/boost/boost/1.48.0/boost_1_48_0.tar.gz
Reusing existing connection to downloads.sourceforge.net:80.
HTTP request sent, awaiting response... 302 Found
Location: http://voxel.dl.sourceforge.net/project/boost/boost/1.48.0/boost_1_48_0.tar.gz [following]
--2012-01-05 13:34:32-- http://voxel.dl.sourceforge.net/project/boost/boost/1.48.0/boost_1_48_0.tar.gz
Resolving voxel.dl.sourceforge.net... 208.122.29.16, 208.122.29.17, 208.122.29.18, ...
Connecting to voxel.dl.sourceforge.net|208.122.29.16|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 58665706 (56M) [application/x-gzip]
Saving to: `boost_1_48_0.tar.gz.part'
100%[=====================================================================================================================>] 58,665,706 215K/s in 4m 52s
2012-01-05 13:39:28 (196 KB/s) - `boost_1_48_0.tar.gz.part' saved [58665706/58665706]
==> Validating source files with md5sums...
boost_1_48_0.tar.gz ... Passed
==> Validating source files with sha1sums...
boost_1_48_0.tar.gz ... Passed
==> Extracting Sources...
-> Extracting boost_1_48_0.tar.gz with bsdtar
==> Starting build()...
### Using 'cc' toolset.
rm -rf bootstrap
mkdir bootstrap
gcc -o bootstrap/jam0 -m32 command.c compile.c debug.c expand.c glob.c hash.c hdrmacro.c headers.c jam.c jambase.c jamgram.c lists.c make.c make1.c newstr.c option.c output.c parse.c pathunix.c pathvms.c regexp.c rules.c scan.c search.c subst.c timestamp.c variable.c modules.c strings.c filesys.c builtins.c pwd.c class.c native.c md5.c w32_getreg.c modules/set.c modules/path.c modules/regex.c modules/property-set.c modules/sequence.c modules/order.c execunix.c fileunix.c
./bootstrap/jam0 -f build.jam --toolset=cc --toolset-root= clean
...found 1 target...
...updating 1 target...
...updated 1 target...
./bootstrap/jam0 -f build.jam --toolset=cc --toolset-root=
...found 49 targets...
...updating 3 targets...
[MKDIR] bin.linuxx86
[COMPILE] bin.linuxx86/b2
[COPY] bin.linuxx86/bjam
...updated 3 targets...
Performing configuration checks
- has_icu builds : yes
...patience...
...found 1013 targets...
...updating 82 targets...
common.mkdir ../../bin.v2/tools
common.mkdir ../../bin.v2/tools/bcp
common.mkdir ../../bin.v2/tools/bcp/gcc-4.6.2
common.mkdir ../../bin.v2/tools/bcp/gcc-4.6.2/release
common.mkdir ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/add_dependent_lib.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/add_path.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/bcp_imp.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/copy_path.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/file_types.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/fileview.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/main.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/path_operations.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/scan_cvs_path.o
scan_cvs_path.cpp: In member function ‘void bcp_implementation::scan_cvs_path(const boost::filesystem3::path&)’:
scan_cvs_path.cpp:34:68: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/licence_info.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/scan_licence.o
scan_licence.cpp: In function ‘const char* context_before_license(const fileview&, fileview::const_iterator, int)’:
scan_licence.cpp:31:76: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
scan_licence.cpp: In function ‘const char* context_after_license(const fileview&, fileview::const_iterator, int)’:
scan_licence.cpp:52:74: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/output_licence_info.o
common.mkdir ../../bin.v2/libs/test
common.mkdir ../../bin.v2/libs/test/build
common.mkdir ../../bin.v2/libs/test/build/gcc-4.6.2
common.mkdir ../../bin.v2/libs/test/build/gcc-4.6.2/release
common.mkdir ../../bin.v2/libs/test/build/gcc-4.6.2/release/link-static
gcc.compile.c++ ../../bin.v2/libs/test/build/gcc-4.6.2/release/link-static/execution_monitor.o
gcc.compile.c++ ../../bin.v2/libs/test/build/gcc-4.6.2/release/link-static/debug.o
gcc.compile.c++ ../../bin.v2/libs/test/build/gcc-4.6.2/release/link-static/cpp_main.o
gcc.archive ../../bin.v2/libs/test/build/gcc-4.6.2/release/link-static/libboost_prg_exec_monitor.a
common.mkdir ../../bin.v2/libs/regex/build/gcc-4.6.2/release
common.mkdir ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/c_regex_traits.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/cpp_regex_traits.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/cregex.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/fileiter.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/icu.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/instances.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/posix_api.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/regex.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/regex_debug.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/regex_raw_buffer.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/regex_traits_defaults.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/static_mutex.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/w32_regex_traits.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/wc_regex_traits.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/wide_posix_api.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/winstances.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/usinstances.o
gcc.archive ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/libboost_regex.a
common.mkdir ../../bin.v2/libs/filesystem
common.mkdir ../../bin.v2/libs/filesystem/build
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v2
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v2/src
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v2/src/v2_operations.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v2/src/v2_path.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v2/src/v2_portability.o
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/operations.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/path.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/portability.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/windows_file_codecvt.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/codecvt_error_category.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/path_traits.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/unique_path.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/utf8_codecvt_facet.o
gcc.archive ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/libboost_filesystem.a
common.mkdir ../../bin.v2/libs/system
common.mkdir ../../bin.v2/libs/system/build
common.mkdir ../../bin.v2/libs/system/build/gcc-4.6.2
common.mkdir ../../bin.v2/libs/system/build/gcc-4.6.2/release
common.mkdir ../../bin.v2/libs/system/build/gcc-4.6.2/release/link-static
gcc.compile.c++ ../../bin.v2/libs/system/build/gcc-4.6.2/release/link-static/error_code.o
gcc.archive ../../bin.v2/libs/system/build/gcc-4.6.2/release/link-static/libboost_system.a
gcc.link ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/bcp
common.mkdir ../../dist
common.mkdir ../../dist/bin
common.copy ../../dist/bin/bcp
...updated 82 targets...
Building the Boost C++ Libraries.
Performing configuration checks
- has_icu builds : no
warning: Graph library does not contain MPI-based parallel components.
note: to enable them, add "using mpi ;" to your user-config.jam
- iconv (libc) : yes
- icu : no
- icu (lib64) : no
- ../config//has_gcc_visibility builds : yes
- ../config//has_long_double_support builds : yes
warning: skipping optional Message Passing Interface (MPI) library.
note: to enable MPI support, add "using mpi ;" to user-config.jam.
note: to suppress this message, pass "--without-mpi" to bjam.
note: otherwise, you can safely ignore this message.
Component configuration:
- chrono : building
- date_time : building
- exception : building
- filesystem : building
- graph : building
- graph_parallel : building
- iostreams : building
- locale : building
- math : building
- mpi : building
- program_options : building
- python : not building
- random : building
- regex : building
- serialization : building
- signals : building
- system : building
- test : building
- thread : building
- timer : building
- wave : building
...patience...
...patience...
...patience...
...patience...
...found 6866 targets...
...updating 880 targets...
common.mkdir stage
common.mkdir stage/lib
common.mkdir bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/c_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/cpp_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/cregex.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/fileiter.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/icu.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/instances.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/posix_api.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/regex.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/regex_debug.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/regex_raw_buffer.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/regex_traits_defaults.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/static_mutex.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/w32_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/wc_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/wide_posix_api.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/winstances.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/usinstances.o
gcc.link.dll bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_regex.so.1.48.0
common.copy stage/lib/libboost_regex.so.1.48.0
ln-UNIX stage/lib/libboost_regex.so
common.mkdir bin.v2/libs/graph
common.mkdir bin.v2/libs/graph/build
common.mkdir bin.v2/libs/graph/build/gcc-4.6.2
common.mkdir bin.v2/libs/graph/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/graph/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/graph/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/graph/build/gcc-4.6.2/release/address-model-32/threading-multi/read_graphviz_new.o
gcc.compile.c++ bin.v2/libs/graph/build/gcc-4.6.2/release/address-model-32/threading-multi/graphml.o
gcc.link.dll bin.v2/libs/graph/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_graph.so.1.48.0
common.copy stage/lib/libboost_graph.so.1.48.0
ln-UNIX stage/lib/libboost_graph.so
common.mkdir bin.v2/libs/iostreams
common.mkdir bin.v2/libs/iostreams/build
common.mkdir bin.v2/libs/iostreams/build/gcc-4.6.2
common.mkdir bin.v2/libs/iostreams/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/file_descriptor.o
gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/mapped_file.o
gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/zlib.o
gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/gzip.o
gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/bzip2.o
gcc.link.dll bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_iostreams.so.1.48.0
common.copy stage/lib/libboost_iostreams.so.1.48.0
ln-UNIX stage/lib/libboost_iostreams.so
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/encoding
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/encoding/codepage.o
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/date_time.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/format.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/formatting.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/generator.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/ids.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/localization_backend.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/message.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/mo_lambda.o
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util/codecvt_converter.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util/default_locale.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util/info.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util/locale_data.o
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix/codecvt.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix/collate.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix/converter.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix/numeric.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix/posix_backend.o
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std/codecvt.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std/collate.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std/converter.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std/numeric.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std/std_backend.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util/gregorian.o
gcc.link.dll bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_locale.so.1.48.0
common.copy stage/lib/libboost_locale.so.1.48.0
ln-UNIX stage/lib/libboost_locale.so
common.mkdir bin.v2/libs/math/build
common.mkdir bin.v2/libs/math/build/gcc-4.6.2
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/..
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/../src
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/../src/tr1
gcc.compile.c++.pch bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/../src/tr1/pch.hpp.gch
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_laguerre.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_legendre.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/beta.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_1.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_2.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_3.o
...on 100th target...
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_i.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_j.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_k.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_neumann.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_1.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_2.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_3.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expint.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hermite.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/laguerre.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/legendre.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/riemann_zeta.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_bessel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_legendre.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_neumann.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_tr1.so.1.48.0
common.copy stage/lib/libboost_math_tr1.so.1.48.0
ln-UNIX stage/lib/libboost_math_tr1.so
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_laguerref.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_legendref.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/betaf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_1f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_2f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_3f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_if.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_jf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_kf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_neumannf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_1f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_2f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_3f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expintf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hermitef.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/laguerref.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/legendref.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/riemann_zetaf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_besself.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_legendref.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_neumannf.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_tr1f.so.1.48.0
common.copy stage/lib/libboost_math_tr1f.so.1.48.0
ln-UNIX stage/lib/libboost_math_tr1f.so
common.mkdir bin.v2/libs/math/config/gcc-4.6.2/release
common.mkdir bin.v2/libs/math/config/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/math/config/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/math/config/gcc-4.6.2/release/address-model-32/threading-multi/has_long_double_support.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_laguerrel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_legendrel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/betal.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_1l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_2l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_3l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_il.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_jl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_kl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_neumannl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_1l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_2l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_3l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expintl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hermitel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/laguerrel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/legendrel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/riemann_zetal.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_bessell.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_legendrel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_neumannl.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_tr1l.so.1.48.0
common.copy stage/lib/libboost_math_tr1l.so.1.48.0
ln-UNIX stage/lib/libboost_math_tr1l.so
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/acosh.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/asinh.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/atanh.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cbrt.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/copysign.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erfc.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expm1.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fmax.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fmin.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fpclassify.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hypot.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lgamma.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/llround.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/log1p.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lround.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nextafter.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nexttoward.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/round.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/tgamma.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/trunc.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_c99.so.1.48.0
common.copy stage/lib/libboost_math_c99.so.1.48.0
ln-UNIX stage/lib/libboost_math_c99.so
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/acoshf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/asinhf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/atanhf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cbrtf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/copysignf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erfcf.o
...on 200th target...
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erff.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expm1f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fmaxf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fminf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fpclassifyf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hypotf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lgammaf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/llroundf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/log1pf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lroundf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nextafterf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nexttowardf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/roundf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/tgammaf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/truncf.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_c99f.so.1.48.0
common.copy stage/lib/libboost_math_c99f.so.1.48.0
ln-UNIX stage/lib/libboost_math_c99f.so
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/acoshl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/asinhl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/atanhl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cbrtl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/copysignl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erfcl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erfl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expm1l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fmaxl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fminl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fpclassifyl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hypotl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lgammal.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/llroundl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/log1pl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lroundl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nextafterl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nexttowardl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/roundl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/tgammal.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/truncl.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_c99l.so.1.48.0
common.copy stage/lib/libboost_math_c99l.so.1.48.0
ln-UNIX stage/lib/libboost_math_c99l.so
common.mkdir bin.v2/libs/program_options
common.mkdir bin.v2/libs/program_options/build
common.mkdir bin.v2/libs/program_options/build/gcc-4.6.2
common.mkdir bin.v2/libs/program_options/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/cmdline.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/config_file.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/options_description.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/parsers.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/variables_map.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/value_semantic.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/positional_options.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/utf8_codecvt_facet.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/convert.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/winmain.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/split.o
gcc.link.dll bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_program_options.so.1.48.0
common.copy stage/lib/libboost_program_options.so.1.48.0
ln-UNIX stage/lib/libboost_program_options.so
common.mkdir bin.v2/libs/random
common.mkdir bin.v2/libs/random/build
common.mkdir bin.v2/libs/random/build/gcc-4.6.2
common.mkdir bin.v2/libs/random/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/random/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/random/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/random/build/gcc-4.6.2/release/address-model-32/threading-multi/random_device.o
gcc.link.dll bin.v2/libs/random/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_random.so.1.48.0
common.copy stage/lib/libboost_random.so.1.48.0
ln-UNIX stage/lib/libboost_random.so
common.mkdir bin.v2/libs/serialization
common.mkdir bin.v2/libs/serialization/build
common.mkdir bin.v2/libs/serialization/build/gcc-4.6.2
common.mkdir bin.v2/libs/serialization/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_archive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_iarchive.o
libs/serialization/src/basic_iarchive.cpp: In member function ‘const boost::archive::detail::basic_pointer_iserializer* boost::archive::detail::basic_iarchive_impl::load_pointer(boost::archive::detail::basic_iarchive&, void*&, const boost::archive::detail::basic_pointer_iserializer*, const boost::archive::detail::basic_pointer_iserializer* (*)(const boost::serialization::extended_type_info&))’:
libs/serialization/src/basic_iarchive.cpp:437:23: warning: variable ‘new_cid’ set but not used [-Wunused-but-set-variable]
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_iserializer.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_oarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_oserializer.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_pointer_iserializer.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_pointer_oserializer.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_serializer_map.o
libs/serialization/src/basic_serializer_map.cpp: In member function ‘bool boost::archive::detail::basic_serializer_map::insert(const boost::archive::detail::basic_serializer*)’:
libs/serialization/src/basic_serializer_map.cpp:46:47: warning: variable ‘result’ set but not used [-Wunused-but-set-variable]
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_text_iprimitive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_text_oprimitive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_xml_archive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/binary_iarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/binary_oarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/extended_type_info.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/extended_type_info_typeid.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/extended_type_info_no_rtti.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/polymorphic_iarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/polymorphic_oarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/stl_port.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/text_iarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/text_oarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/void_cast.o
...on 300th target...
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/archive_exception.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_grammar.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_iarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_oarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_archive_exception.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/shared_ptr_helper.o
gcc.link.dll bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_serialization.so.1.48.0
common.copy stage/lib/libboost_serialization.so.1.48.0
ln-UNIX stage/lib/libboost_serialization.so
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_text_wiprimitive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_text_woprimitive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/text_wiarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/text_woarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/utf8_codecvt_facet.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_wgrammar.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_wiarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_woarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/codecvt_null.o
gcc.link.dll bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_wserialization.so.1.48.0
common.copy stage/lib/libboost_wserialization.so.1.48.0
ln-UNIX stage/lib/libboost_wserialization.so
common.mkdir bin.v2/libs/signals
common.mkdir bin.v2/libs/signals/build
common.mkdir bin.v2/libs/signals/build/gcc-4.6.2
common.mkdir bin.v2/libs/signals/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/trackable.o
gcc.compile.c++ bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/connection.o
gcc.compile.c++ bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/named_slot_map.o
gcc.compile.c++ bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/signal_base.o
gcc.compile.c++ bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/slot.o
gcc.link.dll bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_signals.so.1.48.0
common.copy stage/lib/libboost_signals.so.1.48.0
ln-UNIX stage/lib/libboost_signals.so
common.mkdir bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/execution_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/debug.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/cpp_main.o
gcc.link.dll bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_prg_exec_monitor.so.1.48.0
common.copy stage/lib/libboost_prg_exec_monitor.so.1.48.0
ln-UNIX stage/lib/libboost_prg_exec_monitor.so
common.mkdir bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/compiler_log_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/debug.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/execution_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/framework.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/plain_report_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/progress_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/results_collector.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/results_reporter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/test_main.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/test_tools.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/unit_test_log.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/unit_test_main.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/unit_test_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/unit_test_parameters.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/unit_test_suite.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/xml_log_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/xml_report_formatter.o
gcc.archive bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_test_exec_monitor.a
common.copy stage/lib/libboost_test_exec_monitor.a
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/compiler_log_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/exception_safety.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/framework.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/interaction_based.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/logged_expectations.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/plain_report_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/progress_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/results_collector.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/results_reporter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/test_tools.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/unit_test_log.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/unit_test_main.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/unit_test_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/unit_test_parameters.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/unit_test_suite.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_log_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_report_formatter.o
gcc.link.dll bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_unit_test_framework.so.1.48.0
common.copy stage/lib/libboost_unit_test_framework.so.1.48.0
ln-UNIX stage/lib/libboost_unit_test_framework.so
common.mkdir bin.v2/libs/thread
common.mkdir bin.v2/libs/thread/build
common.mkdir bin.v2/libs/thread/build/gcc-4.6.2
common.mkdir bin.v2/libs/thread/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32/threading-multi
common.mkdir bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32/threading-multi/pthread
gcc.compile.c++ bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32/threading-multi/pthread/thread.o
In file included from libs/thread/src/pthread/thread.cpp:26:0:
libs/thread/src/pthread/timeconv.inl: In function ‘void {anonymous}::to_time(int, boost::xtime&)’:
libs/thread/src/pthread/timeconv.inl:22:9: warning: variable ‘res’ set but not used [-Wunused-but-set-variable]
libs/thread/src/pthread/timeconv.inl: In function ‘void {anonymous}::to_timespec_duration(const boost::xtime&, timespec&)’:
libs/thread/src/pthread/timeconv.inl:59:9: warning: variable ‘res’ set but not used [-Wunused-but-set-variable]
libs/thread/src/pthread/timeconv.inl: In function ‘void {anonymous}::to_duration(boost::xtime, int&)’:
libs/thread/src/pthread/timeconv.inl:90:9: warning: variable ‘res’ set but not used [-Wunused-but-set-variable]
libs/thread/src/pthread/timeconv.inl: In function ‘void {anonymous}::to_microduration(boost::xtime, int&)’:
libs/thread/src/pthread/timeconv.inl:112:9: warning: variable ‘res’ set but not used [-Wunused-but-set-variable]
gcc.compile.c++ bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32/threading-multi/pthread/once.o
gcc.link.dll bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_thread.so.1.48.0
common.copy stage/lib/libboost_thread.so.1.48.0
ln-UNIX stage/lib/libboost_thread.so
common.mkdir bin.v2/libs/timer
common.mkdir bin.v2/libs/timer/build
common.mkdir bin.v2/libs/timer/build/gcc-4.6.2
...on 400th target...
common.mkdir bin.v2/libs/timer/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/timer/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/timer/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/timer/build/gcc-4.6.2/release/address-model-32/threading-multi/auto_timers_construction.o
gcc.compile.c++ bin.v2/libs/timer/build/gcc-4.6.2/release/address-model-32/threading-multi/cpu_timer.o
common.mkdir bin.v2/libs/chrono
common.mkdir bin.v2/libs/chrono/build
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/threading-multi/chrono.o
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/threading-multi/thread_clock.o
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/threading-multi/process_cpu_clocks.o
In file included from ./boost/chrono/detail/inlined/process_cpu_clocks.hpp:39:0,
from libs/chrono/src/process_cpu_clocks.cpp:17:
./boost/chrono/detail/inlined/posix/process_cpu_clocks.hpp: In static member function ‘static boost::chrono::process_system_cpu_clock::time_point boost::chrono::process_system_cpu_clock::now()’:
./boost/chrono/detail/inlined/posix/process_cpu_clocks.hpp:218:1: warning: control reaches end of non-void function [-Wreturn-type]
common.mkdir bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/threading-multi/error_code.o
gcc.link.dll bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_system.so.1.48.0
gcc.link.dll bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_chrono.so.1.48.0
gcc.link.dll bin.v2/libs/timer/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_timer.so.1.48.0
common.copy stage/lib/libboost_timer.so.1.48.0
ln-UNIX stage/lib/libboost_timer.so
common.mkdir bin.v2/libs/wave
common.mkdir bin.v2/libs/wave/build
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_cpp_exprgrammar.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_cpp_grammar.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_cpp_literalgrs.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_defined_grammar.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_predef_macros.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_re2c_lexer.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_re2c_lexer_str.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/token_ids.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/wave_config_constant.o
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/cpplexer
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/cpplexer/re2clex
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/cpplexer/re2clex/aq.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/cpplexer/re2clex/cpp_re.o
common.mkdir bin.v2/libs/date_time
common.mkdir bin.v2/libs/date_time/build
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi/gregorian
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi/gregorian/greg_month.o
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi/gregorian/greg_weekday.o
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi/gregorian/date_generators.o
gcc.link.dll bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_date_time.so.1.48.0
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v2
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v2/src
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v2/src/v2_operations.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v2/src/v2_path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v2/src/v2_portability.o
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/operations.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/portability.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/windows_file_codecvt.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/codecvt_error_category.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/path_traits.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/unique_path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/utf8_codecvt_facet.o
gcc.link.dll bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_filesystem.so.1.48.0
gcc.link.dll bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_wave.so.1.48.0
common.copy stage/lib/libboost_wave.so.1.48.0
ln-UNIX stage/lib/libboost_wave.so
common.copy stage/lib/libboost_system.so.1.48.0
ln-UNIX stage/lib/libboost_system.so
common.copy stage/lib/libboost_chrono.so.1.48.0
ln-UNIX stage/lib/libboost_chrono.so
common.copy stage/lib/libboost_date_time.so.1.48.0
ln-UNIX stage/lib/libboost_date_time.so
common.mkdir bin.v2/libs/exception
common.mkdir bin.v2/libs/exception/build
common.mkdir bin.v2/libs/exception/build/gcc-4.6.2
common.mkdir bin.v2/libs/exception/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/exception/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/exception/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/exception/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
gcc.compile.c++ bin.v2/libs/exception/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/clone_current_exception_non_intrusive.o
gcc.archive bin.v2/libs/exception/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_exception.a
common.copy stage/lib/libboost_exception.a
common.copy stage/lib/libboost_filesystem.so.1.48.0
ln-UNIX stage/lib/libboost_filesystem.so
common.mkdir bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
gcc.compile.c++ bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/error_code.o
gcc.archive bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_system.a
common.copy stage/lib/libboost_system.a
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
...on 500th target...
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/chrono.o
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/thread_clock.o
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/process_cpu_clocks.o
In file included from ./boost/chrono/detail/inlined/process_cpu_clocks.hpp:39:0,
from libs/chrono/src/process_cpu_clocks.cpp:17:
./boost/chrono/detail/inlined/posix/process_cpu_clocks.hpp: In static member function ‘static boost::chrono::process_system_cpu_clock::time_point boost::chrono::process_system_cpu_clock::now()’:
./boost/chrono/detail/inlined/posix/process_cpu_clocks.hpp:218:1: warning: control reaches end of non-void function [-Wreturn-type]
gcc.archive bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_chrono.a
common.copy stage/lib/libboost_chrono.a
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/gregorian
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/gregorian/greg_month.o
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/gregorian/greg_weekday.o
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/gregorian/date_generators.o
gcc.archive bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_date_time.a
common.copy stage/lib/libboost_date_time.a
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v2
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v2/src
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v2/src/v2_operations.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v2/src/v2_path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v2/src/v2_portability.o
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/operations.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/portability.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/windows_file_codecvt.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/codecvt_error_category.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/path_traits.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/unique_path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/utf8_codecvt_facet.o
gcc.archive bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_filesystem.a
common.copy stage/lib/libboost_filesystem.a
common.mkdir bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/c_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/cpp_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/cregex.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/fileiter.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/icu.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/instances.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/posix_api.o
gcc.c -
[SOLVED] Enabling debug for ath9k in compat-drivers-patched from AUR
Wireless card: TP-LINK TL-WN951N. lspci says that it is an Atheros AR5416 adapter [AR5008].
Some background: I'm having the same issues as the OP in this thread, which references this bug report. The problem is that I get a 2000 ms ping every 30 seconds. So 2 seconds of inactivity every 30 seconds. I have the same wireless PCI card, as well. I need to fix this, because it's making online gaming impossible. I should also note that the card is working just fine in Windows 8, however. I am using net-auto-wireless. I have tried using wicd, enabling ath9k's nohwcrypt option, toggling the card's power save, installing the latest compat-drivers-patched from the AUR, toggling different settings in my motherboard's BIOS, and removing the antennae from the card. But nothing has made a significant difference.
I think I'm really close now. I just have to disable ANI. But in order to do that, it seems that I need to enable debugging for ath9k. But this means that I need to either recompile a custom kernel, or somehow enable debug for ath9k in compat-drivers-patched from the AUR. I'd prefer the latter, as that means that I will have a more bleeding-edge driver. That, and I won't have to touch the kernel as much. What I want is described on this page. But it seems too complicated to me. Please let me explain.
I've installed things from the AUR before, as mentioned above, and have properly configured my makepkg.conf for my system. So I'd like to use the CFLAGS and such that I've set. I don't understand how everything works in the PKGBUILD; I don't have much experience with sed and awk and regular expressions, and haven't done much shell scripting at all. It seems that at some point in the PKGBUILD, I need to enable debugging for ath9k before it is compiled. Apparently on the last page I linked to, I need to add:
export CONFIG_ATH_DEBUG=y
export CONFIG_ATH9K_DEBUG=y
export CONFIG_ATH9K_DEBUGFS=y
to some config.mk file. I can only get access to the config.mk file after I install the package with pacman. I've tried adding those lines to my /etc/profile file, and checked, after a reboot, with "set", that those variables are indeed set. But the thing is, with these variables set in /etc/profile, when I run makepkg, makepkg fails with an error 2. I tried again and got the same error. I removed those lines from my /etc/profile, rebooted, tried makepkg again, and everything worked. So putting those lines in my /etc/profile is not the solution, and I feel like I'm doing something very stupid. What am I doing wrong?
I should also note that I've tried to read the wiki page on compiling a custom kernel using ABS, but it seems to just say "get your custom configuration files" and then just continue (so it assumes that I should already be familiar with the configuration part). The PKGBUILD and Creating Packages wiki pages also seem to be a little... too advanced for me at this point in time.
So how do I enable debugging for ath9k in compat-drivers-patched from the AUR? I'd prefer to stick with only editing the PKGBUILD and using makepkg, if possible.
I've really tried to search the web and the arch forums on how to fix this problem myself, but alas, it seems that I need help this time. I greatly appreciate your time for reading my long post.
UPDATE:
I've made a lot of progress. I ended up removing the AUR package with pacman by invoking "pacman -Rsn compat-drivers-patched".
Instructions for [almost] success: First, download compat-drivers-patched from AUR. Then move it to the "builds" directory (or "local", if using ABS). Extract the tarball. After the new directory is created, cd into it. Now here's the important part: run
$ makepkg -so
Then cd into src, cd into the directory inside src, then edit the config.mk file. Make sure these lines are uncommented (or created, if not already there):
export CONFIG_CFG80211_DEBUGFS=y
export CONFIG_MAC80211_DEBUGFS=y
export CONFIG_ATH_DEBUG=y
export CONFIG_ATH9K_DEBUG=y
export CONFIG_ATH9K_DEBUGFS=y
(source)
Now run "cd ../.." to go back up two directories. Now run:
$ makepkg -e
# pacman -U <file that was produced>
And I ran "mkinitcpio -p linux" just in case, but I'm not sure if that is necessary at all. I'm... not touching the kernel, right?
Now I ran:
echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani
But bash would say that the file or directory doesn't exist. Even if I prepend it with "sudo", I get the same results. I was only able to get the command to work if I logged in as root. I even put the line in my /etc/profile. The 2000 ms ping every 30 seconds is now GONE. HOWEVER! If I reboot and log in as a normal user, the problem is there again. If I reboot and log in as root, the problem is gone. If I then log out and then log back in as a normal user, the problem does not come back.
So really, I can avoid the problem if I first log in as root, log out, and then log back in as a normal user. But this is a great inconvenience. I would much prefer if I could just log in as a normal user right after boot, and have everything working.
Now, how do I get the command to automatically run at boot as root (without me having to log in as root), and work?
UPDATE 2:
I got it working. Putting the line in /etc/profile is not the solution. I created a custom systemd .service file.
Put this into /etc/systemd/service (name it "disable_ani.service"):
EDIT: Wow. I made a glaring typo here. It should be /etc/systemd/system/disable_ani.service
[Unit]
Description=disable_ani
[Service]
Type=oneshot
ExecStart=/bin/sh -c "echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani"
[Install]
WantedBy=multi-user.target
Then make sure to "sudo chmod 755 /etc/systemd/service/disable_ani.service", since root owns this file.
Then run "sudo systemctl enable disable_ani.service".
EDIT: It has been brought to my attention that there is a much simpler way than creating a custom service.
Using a tmpfile:
/etc/tmpfiles.d/disable_ani.conf
w /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani - - - - 1
Done.
Now ANI is persistently disabled between boots, even if I log in as a normal user right after boot.
Thanks for reading.
Last edited by vyu223 (2013-03-12 10:20:19)So zsh is telling you that the command didn't work, since it claims that there is no such file or directory. I had a lot of trouble with getting the echo command to work, as well. I found that if out of these lines:
export CONFIG_CFG80211_DEBUGFS=y
export CONFIG_MAC80211_DEBUGFS=y
export CONFIG_ATH_DEBUG=y
export CONFIG_ATH9K_DEBUG=y
export CONFIG_ATH9K_DEBUGFS=y
If the first and second line above were not uncommented in the config.mk file, I couldn't leave the last line above uncommented as well, or else makepkg would fail and give me an error. So originally I had only the 3rd and 4th lines above uncommented/inserted in my config.mk. With that configuration, I could not get the echo command to work, no matter what. Have you uncommented or inserted all of the above 5 lines into your config.mk?
After making sure all of the above 5 lines were in my config.mk, the echo command still didn't work, even if I preceded the command with sudo, or entered a su session. Bash would tell me that there was no such file or directory. I found that if I actually logged out of my normal user, and then logged back into the computer as root, the command would work. If your shell does not give you any feedback (particularly, "no such file or directory"), then the command worked. In order to get the command to run every time the computer boots, I used a systemd service, so that the command is issued as root. For some reason, it doesn't work if you put the command into /etc/profile.
Oh, and it would probably be helpful to mention that for the compat-drivers-patched package from the AUR, the PKGBUILD checks to see what your _selected_drivers variable is before compilation. If you set _selected_drivers=ath9k, your compile times will be much shorter. -
[Solved] how to patch source file from AUR for gcc46 ?
In a topic from yesterday, I was seeking help to get AUR package 'insight' installed, but so far no luck, since there seems to be a bug in the source that won't work with the gcc47 compiler. I'm posting this new topic, since the subject has changed a bit - I'm now trying to compile gcc46 because another user had success with that version in compiling the 'insight' package, and I need to patch the gcc46 source to get it to compile.
I'm looking for help to fix the problem myself, or if anyone wants to create a new PKGBUILD to handle the problem, that would be nice too
Originally, I thought I would try to install gcc42 from AUR and use that to run makepkg on the 'insight' app, since one user had success with this version of gcc. Both gcc42 and gcc46 give me the same errors with an 'unwind' file, and I couldn't get either to compile (errors about unwind.h or linux-unwind.h).
I found a post with a link to a patch (for gcc46), but I have no idea where to apply or how to apply this patch. I think I'm supposed to apply it to this file, but again, I'm not sure how to apply a patch:
/home/briphi/builds/gcc46/src/gcc-4.6.3/gcc/unwind-dw2.c
, but this c file has includes to other "unwind" header files. Here is a link to the unwind-dw2.c file at my dropbox folder, if anyone needs to see this file without downloading/compiling gcc46: http://dl.dropbox.com/u/8169867/unwind-dw2.c
Sticking with gcc46 for the moment (since I found the patch for this version)...
The post with the link to the patch to gcc46 is here: https://bbs.archlinux.org/viewtopic.php … 0#p1229880
The patch at pastebin.com is here: http://pastebin.com/VkgE27Pd and looks like this:
--- a/gcc/config/i386/linux-unwind.h 2011-01-03 20:52:22.000000000 +0000
+++ b/gcc/config/i386/linux-unwind.h 2012-07-06 12:23:51.562859470 +0100
@@ -133,9 +133,9 @@
struct rt_sigframe {
int sig;
- struct siginfo *pinfo;
+ siginfo_t *pinfo;
void *puc;
- struct siginfo info;
+ siginfo_t info;
struct ucontext uc;
} *rt_ = context->cfa;
/* The void * cast is necessary to avoid an aliasing warning.
The package that I'm actually trying to install is 'insight', here: https://aur.archlinux.org/packages/insight/
My error when compiling (running makepkg -s on gcc46) looks like this:
/home/briphi/builds/gcc46/src/gcc-build/./gcc/xgcc -B/home/briphi/builds/gcc46/src/gcc-build/./gcc/ -B/usr/i686-pc-linux-gnu/bin/ -B/usr/i686-pc-linux-gnu/lib/ -isystem /usr/i686-pc-linux-gnu/include -isystem /usr/i686-pc-linux-gnu/sys-include -g -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -O2 -g -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -fno-stack-protector -I. -I. -I../.././gcc -I/home/briphi/builds/gcc46/src/gcc-4.6.3/libgcc -I/home/briphi/builds/gcc46/src/gcc-4.6.3/libgcc/. -I/home/briphi/builds/gcc46/src/gcc-4.6.3/libgcc/../gcc -I/home/briphi/builds/gcc46/src/gcc-4.6.3/libgcc/../include -I/home/briphi/builds/gcc46/src/gcc-4.6.3/libgcc/config/libbid -DENABLE_DECIMAL_BID_FORMAT -DHAVE_CC_TLS -DUSE_TLS -o unwind-dw2.o -MT unwind-dw2.o -MD -MP -MF unwind-dw2.dep -fexceptions -c /home/briphi/builds/gcc46/src/gcc-4.6.3/libgcc/../gcc/unwind-dw2.c -fvisibility=hidden -DHIDE_EXPORTS
In file included from /home/briphi/builds/gcc46/src/gcc-4.6.3/libgcc/../gcc/unwind-dw2.c:333:0:
/home/briphi/builds/gcc46/src/gcc-4.6.3/libgcc/../gcc/config/i386/linux-unwind.h: In function ‘x86_fallback_frame_state’:
/home/briphi/builds/gcc46/src/gcc-4.6.3/libgcc/../gcc/config/i386/linux-unwind.h:138:17: error: field ‘info’ has incomplete type
make[3]: *** [unwind-dw2.o] Error 1
make[3]: Leaving directory `/home/briphi/builds/gcc46/src/gcc-build/i686-pc-linux-gnu/libgcc'
make[2]: *** [all-stage1-target-libgcc] Error 2
make[2]: Leaving directory `/home/briphi/builds/gcc46/src/gcc-build'
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory `/home/briphi/builds/gcc46/src/gcc-build'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
Last edited by stringchopper (2013-02-15 08:29:39)Lone_Wolf wrote:
@ stringchopper
The file(s) that need patching are mentioned in the patch, so you don't have to know yourself where they are.
patch files like these are usually applied from the directory where you build stuff.
On your system that is probably this folder : /home/briphi/builds/gcc46/src/gcc-4.6.3/
for details about the command used to apply the patch, t0m5k1's link above should help.
Thanks Lone_Wolf for the help. I'm suffering from information overload at the moment, so (@t0m5k1) even though I found the same results that you found through google, they weren't explicit enough. -
Can't download an file from AUR (using yauort)
I keep getting the same error when I try to download anything using yaourt:
[kaipee@kphmsrv ~]$ yaourt bittorrent-sync
1 aur/bittorrent-sync 20130510-1 (36)
BitTorrent Sync
==> Enter n° of packages to be installed (ex: 1 2 3 or 1-3)
==> -------------------------------------------------------
==> 1
==> Downloading bittorrent-sync PKGBUILD from AUR...
(23) Failed writing body
==> ERROR: bittorrent-sync not found in AUR.Rebooted and looks like I can download now.
Though It does look like I need to do some cleaning up
/dev/sda6 9.1G 3.8G 4.9G 44% /
/dev/sda7 9.1G 7.2G 1.4G 84% /var -
Problem about networkmanager from AUR
Well I have downloaded and installed the different dependencies for the package but I got this error during makepkg og networkmanager - to be able to use knetworkmanager. Using kde as desktop - so I'm not that much of the understanding kind of building the packages and the errors from them:
[root@kira networkmanager]# makepkg
==> Making package: networkmanager 0.6.3-2 (Sun Oct 1 19:37:18 CEST 2006)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Using local copy of NetworkManager-0.6.3.tar.bz2
==> Found policy.patch in build dir
==> Found mtufix.patch in build dir
==> Found wpa_supplicant-nodebug.patch in build dir
==> Found dhcp-fix.patch in build dir
==> Found restart-fix.patch in build dir
==> Validating source files with MD5sums
NetworkManager-0.6.3.tar.bz2 ... Passed
policy.patch ... Passed
mtufix.patch ... Passed
wpa_supplicant-nodebug.patch ... Passed
dhcp-fix.patch ... Passed
restart-fix.patch ... Passed
==> Extracting Sources...
==> tar --use-compress-program=bzip2 -xf NetworkManager-0.6.3.tar.bz2
==> Removing existing pkg/ directory...
==> Starting build()...
patching file gnome/applet/nm-applet.conf
patching file src/NetworkManager.conf
patching file src/backends/NetworkManagerArch.c
patching file src/backends/NetworkManagerArch.c
patching file src/backends/NetworkManagerArch.c
patching file src/nm-device-802-11-wireless.c
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking for a BSD-compatible install... /bin/install -c
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking paths.h usability... yes
checking paths.h presence... yes
checking for paths.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for mode_t... yes
checking for pid_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether gcc needs -traditional... no
checking for working memcmp... yes
checking for select... yes
checking for socket... yes
checking for uname... yes
checking for intltool >= 0.27.2... 0.34.1 found
checking for perl... /usr/bin/perl
checking for XML::Parser... ok
checking for iconv... /usr/bin/iconv
checking for msgfmt... /usr/bin/msgfmt
checking for msgmerge... /usr/bin/msgmerge
checking for xgettext... /usr/bin/xgettext
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /usr/bin/msgfmt
checking for dcgettext... yes
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for catalogs to be installed... bg bs ca cs da de el en_CA en_GB es fi fr gu hr hu it ja ko lt mk nb ne nl pa pt_BR rw sk sq sr@Latn sr sv uk vi wa zh_CN zh_TW
checking for wireless-tools >= 28pre9... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for DBUS... yes
Your dbus version is 0,62,0.
checking for GTHREAD... yes
checking for GLIB... yes
checking for GMODULE... yes
checking for HAL... yes
checking for LIBNL... configure: error: Package requirements (libnl-1) were not met:
Package 'libnl-1' has no Name: field
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables LIBNL_CFLAGS
and LIBNL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
make: *** No targets specified and no makefile found. Stop.
==> ERROR: Build Failed. Aborting...Yes - I have installed the package from AUR - wich is the only place where I can find this
So cannot see what to do.
And besides that I cannot see the why not I can get and DHCP address to the wireless network. or get on in a WEP-crypto network!
I have asked another question - but this is to me really really strange and cannot understand what is hapening. -
[SOLVED] Can't compile hdjmod and hdjcpl from AUR.
Hello,
I've bought a Hercules DJ Console MK2, and I would like to use it with Mixxx.
It doesn't seem to be recognized by Mixxx, probably because no drivers are installed.
So I decide to install hdjmod from AUR.
It also gets hdjcpl (dependency), but while compiling, it fails.
Here's the error message :
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c ghelpers.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gbutton.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gcheckbox.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gcombobox.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gslider.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gstatic.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gstatictext.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps gcc -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -c binreloc.c
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
g++ -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -pthread -o hdjcpl hdjcpl.o alsainterface.o bulkinterface.o drivernotification.o hidnotification.o dmanager.o localization.o devnulldlg.o devdjcdlg.o devmk2dlg.o devmp3dlg.o devrmxdlg.o devsteeldlg.o gcontrol.o gdialog.o ghelpers.o gbutton.o gcheckbox.o gcombobox.o gslider.o gstatic.o gstatictext.o binreloc.o -L../../wxWidgets-2.8.10/buildgtk/lib -lz -lm -lasound -pthread -lSM -lgtk-x11-2.0 -lgthread-2.0 -lglib-2.0 -lwx_gtk2_adv-2.8 -lwx_gtk2_core-2.8 -lwx_base-2.8 -lwxpng-2.8
../../wxWidgets-2.8.10/buildgtk/lib/libwx_gtk2_core-2.8.a(corelib_displayx11.o): In function `wxDisplayImplX11::ChangeMode(wxVideoMode const&)':
displayx11.cpp:(.text+0x20f): undefined reference to `XF86VidModeGetAllModeLines'
displayx11.cpp:(.text+0x2f1): undefined reference to `XF86VidModeSwitchToMode'
displayx11.cpp:(.text+0x3bd): undefined reference to `XF86VidModeSwitchToMode'
../../wxWidgets-2.8.10/buildgtk/lib/libwx_gtk2_core-2.8.a(corelib_displayx11.o): In function `wxDisplayImplX11::GetCurrentMode() const':
displayx11.cpp:(.text+0x462): undefined reference to `XF86VidModeGetModeLine'
../../wxWidgets-2.8.10/buildgtk/lib/libwx_gtk2_core-2.8.a(corelib_displayx11.o): In function `wxDisplayImplX11::GetModes(wxVideoMode const&) const':
displayx11.cpp:(.text+0x6b7): undefined reference to `XF86VidModeGetAllModeLines'
collect2: ld returned 1 exit status
make[2]: *** [hdjcpl] Error 1
make[2]: Leaving directory `/tmp/yaourt-tmp-alex/aur-hdjcpl/hdjcpl/src/hdjcpl-1.09/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-alex/aur-hdjcpl/hdjcpl/src/hdjcpl-1.09'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build hdjcpl package.
Do you have any idea about the reason I got this error ?
What are the prerequisite to install these drivers (I mean, is there any other dependency that isn't asked in the PKGBUILD ?) ?
Sorry for my bad english.
Thanks for future answers.
skYzer
Last edited by skYzer (2009-09-23 10:32:20)Welcome to the forum skYzer!
makepkg can show you if there are some dependencies that you didn't installed, and makepkg with -s option does it for you automatically, so it installs all the dependencies.
If the author missed this dependencies from the PKGBUILD, you can see on the url address in the PKGBUILD (so on the author site) what do they write about dependencies, in last case try it manually, and see config.log, or similar outputs.
Btw, it can be built by me without any problem.
Last case you could build it manually, without using fakeroot environment, and the PKGBUILD from maintainer. -
Error building kdebase4-svn from AUR
Anytime I try to build kdebase4-svn from AUR, I get the following error:
[ 88%] Building CXX object kcontrol/access/CMakeFiles/kdeinit_kaccess.dir/kaccess.o
In Datei, eingefügt von /tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace-build/kcontrol/access/kaccess.moc:10,
von /tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp:33:
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace-build/kcontrol/access/../../../kdebase-workspace/kcontrol/access/kaccess.h:15:30: Fehler: Phonon/MediaObject: Datei oder Verzeichnis nicht gefunden
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp:441:2: Warnung: #warning is this the best way to invert a pixmap?
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp:590:2: Warnung: #warning "kde4 fixme"
In file included from /tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace-build/kcontrol/access/kaccess.moc:10,
from /tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp:33:
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace-build/kcontrol/access/../../../kdebase-workspace/kcontrol/access/kaccess.h:76: Fehler: »Phonon« wurde nicht deklariert
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace-build/kcontrol/access/../../../kdebase-workspace/kcontrol/access/kaccess.h:76: Fehler: ISO-C++ verbietet Deklaration von »MediaObject« ohne Typ
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace-build/kcontrol/access/../../../kdebase-workspace/kcontrol/access/kaccess.h:76: Fehler: expected »;« before »*« token
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp: In constructor »KAccessApp::KAccessApp(bool, bool)«:
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp:100: Fehler: Klasse »KAccessApp« hat keinen Feldnamen »_player«
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp: In member function »void KAccessApp::initMasks()«:
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp:318: Warnung: es wird empfohlen, explizite geschweifte Klammern zu setzen, um mehrdeutiges »else« zu vermeiden
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp: In member function »void KAccessApp::xkbBellNotify(XkbBellNotifyEvent*)«:
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp:471: Fehler: »_player« wurde in diesem Gültigkeitsbereich nicht definiert
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp:472: Fehler: »Phonon« wurde nicht deklariert
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp:472: Fehler: »Phonon« wurde nicht deklariert
/tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-svn/src/kdebase-workspace/kcontrol/access/kaccess.cpp:476: Fehler: »_player« wurde in diesem Gültigkeitsbereich nicht definiert
make[2]: *** [kcontrol/access/CMakeFiles/kdeinit_kaccess.dir/kaccess.o] Fehler 1
make[1]: *** [kcontrol/access/CMakeFiles/kdeinit_kaccess.dir/all] Fehler 2
make: *** [all] Fehler 2
==> FEHLER: Build fehlgeschlagen.
Breche ab ...
Error: Makepkg was unable to build kdebase4-workspace-svn package.
Can anyone help me?
Thanks
HenneI tried to build it with yaourt... When doing it the normal way, it works fine...
Thanks -
[Solved] Error installing Flash 64bit from AUR
I tried installing the 64bit flash from here :http://aur.archlinux.org/packages.php?ID=21601, using 'yaourt -S flashplugin-alpha-64 10.0.d20.7-3'
It will say:
Downloading 10.0.d20.7-3 PKGBUILD from AUR
Error: 10.0.d20.7-3 not found in AUR.
So i tried another method by downloading this tar file from http://download.macromedia.com/pub/labs … .so.tar.gz
Then i untarred the file and on the desktop it shows 'libflashplayer.so'
So next i went to terminal, tried doing 'cd Desktop', followed by 'pacman -S libflashplayer.so', but it says i need to be root to do that. So i do 'su - ', and then 'cd Desktop', but it says '-bash: cd: Desktop: No such file or directory.'
How am i suppose to install flash64 bit? Thanks.
Last edited by Chance (2008-12-18 15:19:46)Chance wrote:
I tried installing the 64bit flash from here :http://aur.archlinux.org/packages.php?ID=21601, using 'yaourt -S flashplugin-alpha-64 10.0.d20.7-3'
It will say:
Downloading 10.0.d20.7-3 PKGBUILD from AUR
Error: 10.0.d20.7-3 not found in AUR.
should be just "yaourt -S flashplugin-alpha-64" no version needed
the error is telling you it cant find 10.0.d20.7-3 which is not a package. did you get another error with the first part? or did you see it building the package?
i like building it by hand, so i usually (in a folder on my /home) i do
mkdir flashplugin-alpha-64
cd flashplugin-alpha-64
yaourt -G flashplugin-alpha-64 (to get pKGBUILD and other files)
makepkg (to build)
then install with yaourt -U [full package filename]
makes me feel like i'm in control
Last edited by toxygen (2008-12-18 04:56:50) -
Could not build cups-canon-3.00 from AUR
Hi!
I'm coming from linux mint and I'm totally amazed by simplicity of Arch Linux. However, I have problem with installing my printer (Canon IP1900). I'm unable to install canon-cups-3.00 from AUR (using yaourt). It gives me this error:
==> Zaczynam build()
patching file backend/src/cnij_backend_common.c
patching file cngpijmon/src/bjcupsmon_cups.c
......... libs
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:4: error: 'AM_CONFIG_HEADER': this macro is obsolete.
You should use the 'AC_CONFIG_HEADERS' macro instead.
/usr/share/aclocal-1.13/obsolete-err.m4:12: AM_CONFIG_HEADER is expanded from...
configure.in:4: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: error: echo failed with exit status: 1
Running autoheader...
autoheader: error: AC_CONFIG_HEADERS not found in configure.in
Running automake --gnu ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in: error: no proper invocation of AM_INIT_AUTOMAKE was found.
configure.in: You should verify that configure.in invokes AM_INIT_AUTOMAKE,
configure.in: that aclocal.m4 is present in the top-level directory,
configure.in: and that aclocal.m4 was recently regenerated (using aclocal)
configure.in:9: installing './install-sh'
Makefile.am: installing './COPYING' using GNU General Public License v3 file
Makefile.am: Consider adding the COPYING file to the version control system
Makefile.am: for your code, to avoid questions about which license your project uses
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
buftool/Makefile.am:1: error: library used but 'RANLIB' is undefined
buftool/Makefile.am:1: The usual way to define 'RANLIB' is to add 'AC_PROG_RANLIB'
buftool/Makefile.am:1: to 'configure.in' and run 'autoconf' again.
buftool/Makefile.am: installing './depcomp'
/usr/share/automake-1.13/am/depend2.am: error: am__fastdepCC does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am: The usual way to define 'am__fastdepCC' is to add 'AC_PROG_CC'
/usr/share/automake-1.13/am/depend2.am: to 'configure.in' and run 'aclocal' and 'autoconf' again
/usr/share/automake-1.13/am/depend2.am: error: AMDEP does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am: The usual way to define 'AMDEP' is to add one of the compiler tests
/usr/share/automake-1.13/am/depend2.am: AC_PROG_CC, AC_PROG_CXX, AC_PROG_OBJC, AC_PROG_OBJCXX,
/usr/share/automake-1.13/am/depend2.am: AM_PROG_AS, AM_PROG_GCJ, AM_PROG_UPC
/usr/share/automake-1.13/am/depend2.am: to 'configure.in' and run 'aclocal' and 'autoconf' again
paramlist/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
paramlist/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
paramlist/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
paramlist/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
paramlist/Makefile.am:1: its definition is in aclocal's search path.
Running autoconf ...
configure.in:2: error: possibly undefined macro: AM_INIT_AUTOMAKE
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.in:4: error: possibly undefined macro: AM_CONFIG_HEADER
configure.in:11: error: possibly undefined macro: AM_PROG_LIBTOOL
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
configure: WARNING: unrecognized options: --enable-progpath
./configure: line 2181: syntax error near unexpected token `buftool,'
./configure: line 2181: `AM_INIT_AUTOMAKE(buftool, 1.0.0)'
==> BŁĄD: Wystąpił błąd w build().
Przerywam...
==> ERROR: Makepkg was unable to build cups-canon-3.00.
I tried downgrading automake to 1.11 from AUR, but then, when I try to compile cups-canon-3.00 it just gives me error, that I don't have automake (yes, I did "export automake=automake-1.11").
I'm fighting with it for hours, and still nothing...It looks like this time it changed something so I gave it two tries again:
Before 1st autogen:
==> Zaczynam build()
patching file backend/src/cnij_backend_common.c
patching file cngpijmon/src/bjcupsmon_cups.c
......... libs
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
Running automake --gnu ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:11: installing './config.guess'
configure.in:11: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
Makefile.am: installing './COPYING' using GNU General Public License v3 file
Makefile.am: Consider adding the COPYING file to the version control system
Makefile.am: for your code, to avoid questions about which license your project uses
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
buftool/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
configure: WARNING: unrecognized options: --enable-progpath
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating buftool/Makefile
config.status: creating paramlist/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --enable-progpath
Now type `make' to compile buftool
make all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making all in paramlist
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
/bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c -o paramlist.lo paramlist.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c -fPIC -DPIC -o .libs/paramlist.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c -o paramlist.o >/dev/null 2>&1
mv -f .deps/paramlist.Tpo .deps/paramlist.Plo
/bin/sh ../libtool --tag=CC --mode=link gcc -O2 -Wall -O2 -Wl,-O1,--sort-common,--as-needed,-z,relro -o libparamlist.la paramlist.lo
libtool: link: ar cru .libs/libparamlist.a .libs/paramlist.o
libtool: link: ranlib .libs/libparamlist.a
libtool: link: ( cd ".libs" && rm -f "libparamlist.la" && ln -s "../libparamlist.la" "libparamlist.la" )
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making all in buftool
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -MT buftool.o -MD -MP -MF .deps/buftool.Tpo -c -o buftool.o buftool.c
mv -f .deps/buftool.Tpo .deps/buftool.Po
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -MT buflist.o -MD -MP -MF .deps/buflist.Tpo -c -o buflist.o buflist.c
mv -f .deps/buflist.Tpo .deps/buflist.Po
rm -f libbuftool.a
ar cru libbuftool.a buftool.o buflist.o
ranlib libbuftool.a
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making install in paramlist
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making install in buftool
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
......... cngpij
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:20: installing './config.guess'
configure.in:20: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
cngpij/Makefile.am: installing './depcomp'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for main in -lparamlist... no
checking for main in -lpopt... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating cngpij/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
Making all in cngpij
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT bjcups.o -MD -MP -MF .deps/bjcups.Tpo -c -o bjcups.o bjcups.c
mv -f .deps/bjcups.Tpo .deps/bjcups.Po
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT getipc.o -MD -MP -MF .deps/getipc.Tpo -c -o getipc.o getipc.c
getipc.c: In function ‘GetIPCData’:
getipc.c:63:48: warning: passing argument 3 of ‘accept’ from incompatible pointer type [enabled by default]
In file included from /usr/include/netinet/in.h:24:0,
from /usr/include/arpa/inet.h:22,
from getipc.c:21:
/usr/include/sys/socket.h:244:12: note: expected ‘socklen_t * __restrict__’ but argument is of type ‘size_t *’
mv -f .deps/getipc.Tpo .deps/getipc.Po
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT bjutil.o -MD -MP -MF .deps/bjutil.Tpo -c -o bjutil.o bjutil.c
mv -f .deps/bjutil.Tpo .deps/bjutil.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -L../../libs/paramlist -Wl,-O1,--sort-common,--as-needed,-z,relro -o cngpij bjcups.o getipc.o bjutil.o -lpopt -lcups -lparamlist -lpopt -lcups
libtool: link: gcc -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o cngpij bjcups.o getipc.o bjutil.o -L../../libs/paramlist /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist/.libs/libparamlist.a -lpopt -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
Making install in cngpij
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
/usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin'
/bin/sh ../libtool --mode=install /usr/bin/install -c cngpij '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin'
libtool: install: /usr/bin/install -c cngpij /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin/cngpij
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
......... pstocanonij
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
libtoolize: `AC_PROG_RANLIB' is rendered obsolete by `LT_INIT'
Running aclocal ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:22: installing './config.guess'
configure.in:22: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
filter/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... (cached) ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for main in -lparamlist... no
checking for main in -lpopt... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating filter/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
Making all in filter
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -I../../libs/buftool -O2 -MT pstocanonij.o -MD -MP -MF .deps/pstocanonij.Tpo -c -o pstocanonij.o pstocanonij.c
pstocanonij.c: In function ‘get_ps_params’:
pstocanonij.c:249:3: warning: pointer targets in passing argument 1 of ‘buflist_new’ differ in signedness [-Wpointer-sign]
In file included from pstocanonij.c:35:0:
../../libs/buftool/buflist.h:38:10: note: expected ‘unsigned char *’ but argument is of type ‘char *’
pstocanonij.c:299:5: warning: value computed is not used [-Wunused-value]
pstocanonij.c:385:3: warning: pointer targets in passing argument 1 of ‘buflist_new’ differ in signedness [-Wpointer-sign]
In file included from pstocanonij.c:35:0:
../../libs/buftool/buflist.h:38:10: note: expected ‘unsigned char *’ but argument is of type ‘char *’
pstocanonij.c: In function ‘make_cmd_param’:
pstocanonij.c:905:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:906:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:935:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:936:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c: In function ‘exec_filter’:
pstocanonij.c:1133:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
mv -f .deps/pstocanonij.Tpo .deps/pstocanonij.Po
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -I../../libs/buftool -O2 -MT canonopt.o -MD -MP -MF .deps/canonopt.Tpo -c -o canonopt.o canonopt.c
mv -f .deps/canonopt.Tpo .deps/canonopt.Po
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -I../../libs/buftool -O2 -MT paramlist.o -MD -MP -MF .deps/paramlist.Tpo -c -o paramlist.o paramlist.c
mv -f .deps/paramlist.Tpo .deps/paramlist.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -O2 -Wall -I../../libs/buftool -O2 -L../../libs/buftool -Wl,-O1,--sort-common,--as-needed,-z,relro -o pstocanonij pstocanonij.o canonopt.o paramlist.o -lcups ../../libs/buftool/libbuftool.a -lpopt -lcups
libtool: link: gcc -O2 -Wall -I../../libs/buftool -O2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o pstocanonij pstocanonij.o canonopt.o paramlist.o -L../../libs/buftool ../../libs/buftool/libbuftool.a -lpopt -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
Making install in filter
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
/usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter'
/bin/sh ../libtool --mode=install /usr/bin/install -c pstocanonij '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter'
libtool: install: /usr/bin/install -c pstocanonij /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter/pstocanonij
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
......... backend
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:19: installing './config.guess'
configure.in:19: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
src/Makefile.am: installing './depcomp'
src/Makefile.am:10: warning: 'CFLAGS' is a user variable, you should not override it;
src/Makefile.am:10: use 'AM_CFLAGS' instead
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
Making all in src
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -MT cnij_backend_common.o -MD -MP -MF .deps/cnij_backend_common.Tpo -c -o cnij_backend_common.o cnij_backend_common.c
mv -f .deps/cnij_backend_common.Tpo .deps/cnij_backend_common.Po
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -MT cnij_usb.o -MD -MP -MF .deps/cnij_usb.Tpo -c -o cnij_usb.o cnij_usb.c
cnij_usb.c: In function ‘main’:
cnij_usb.c:97:7: warning: unused variable ‘port’ [-Wunused-variable]
cnij_usb.c:94:4: warning: unused variable ‘username’ [-Wunused-variable]
cnij_usb.c:93:4: warning: unused variable ‘hostname’ [-Wunused-variable]
cnij_usb.c:92:7: warning: unused variable ‘method’ [-Wunused-variable]
mv -f .deps/cnij_usb.Tpo .deps/cnij_usb.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -O2 -Wall -Wl,-O1,--sort-common,--as-needed,-z,relro -o cnijusb cnij_backend_common.o cnij_usb.o -lcups -lcups
libtool: link: gcc -O2 -Wall -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o cnijusb cnij_backend_common.o cnij_usb.o -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
Making install in src
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
/usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend'
/bin/sh ../libtool --mode=install /usr/bin/install -c cnijusb '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend'
libtool: install: /usr/bin/install -c cnijusb /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend/cnijusb
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
. ip1900
.......... lgmon
processing .
Running aclocal ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:12: error: 'AM_CONFIG_HEADER': this macro is obsolete.
You should use the 'AC_CONFIG_HEADERS' macro instead.
/usr/share/aclocal-1.13/obsolete-err.m4:12: AM_CONFIG_HEADER is expanded from...
configure.in:12: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: error: echo failed with exit status: 1
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
autoheader: error: AC_CONFIG_HEADERS not found in configure.in
Running automake --gnu ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in: error: no proper invocation of AM_INIT_AUTOMAKE was found.
configure.in: You should verify that configure.in invokes AM_INIT_AUTOMAKE,
configure.in: that aclocal.m4 is present in the top-level directory,
configure.in: and that aclocal.m4 was recently regenerated (using aclocal)
src/Makefile.am:3: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
src/Makefile.am: installing './depcomp'
/usr/share/automake-1.13/am/depend2.am: error: am__fastdepCC does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am: The usual way to define 'am__fastdepCC' is to add 'AC_PROG_CC'
/usr/share/automake-1.13/am/depend2.am: to 'configure.in' and run 'aclocal' and 'autoconf' again
/usr/share/automake-1.13/am/depend2.am: error: AMDEP does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am: The usual way to define 'AMDEP' is to add one of the compiler tests
/usr/share/automake-1.13/am/depend2.am: AC_PROG_CC, AC_PROG_CXX, AC_PROG_OBJC, AC_PROG_OBJCXX,
/usr/share/automake-1.13/am/depend2.am: AM_PROG_AS, AM_PROG_GCJ, AM_PROG_UPC
/usr/share/automake-1.13/am/depend2.am: to 'configure.in' and run 'aclocal' and 'autoconf' again
Running autoconf ...
configure.in:11: error: possibly undefined macro: AM_INIT_AUTOMAKE
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.in:12: error: possibly undefined macro: AM_CONFIG_HEADER
configure.in:27: error: possibly undefined macro: AM_PROG_CC_STDC
configure.in:31: error: possibly undefined macro: AM_PATH_GTK_2_0
Running ./configure --prefix=/usr --enable-libpath=/usr/lib/bjlib --enable-binpath=/usr/bin --enable-progpath=/usr/bin --program-suffix=ip1900 ...
configure: WARNING: unrecognized options: --enable-libpath, --enable-binpath
./configure: line 1886: syntax error near unexpected token `lgmon{program_suffix},'
./configure: line 1886: `AM_INIT_AUTOMAKE(lgmon{program_suffix}, 3.00-1)'
==> BŁĄD: Wystąpił błąd w build().
Przerywam...
Before both:
==> Zaczynam build()
patching file backend/src/cnij_backend_common.c
patching file cngpijmon/src/bjcupsmon_cups.c
......... libs
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
Running automake --gnu ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:11: installing './config.guess'
configure.in:11: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
Makefile.am: installing './COPYING' using GNU General Public License v3 file
Makefile.am: Consider adding the COPYING file to the version control system
Makefile.am: for your code, to avoid questions about which license your project uses
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
buftool/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
configure: WARNING: unrecognized options: --enable-progpath
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating buftool/Makefile
config.status: creating paramlist/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --enable-progpath
Now type `make' to compile buftool
make all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making all in paramlist
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
/bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c -o paramlist.lo paramlist.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c -fPIC -DPIC -o .libs/paramlist.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c -o paramlist.o >/dev/null 2>&1
mv -f .deps/paramlist.Tpo .deps/paramlist.Plo
/bin/sh ../libtool --tag=CC --mode=link gcc -O2 -Wall -O2 -Wl,-O1,--sort-common,--as-needed,-z,relro -o libparamlist.la paramlist.lo
libtool: link: ar cru .libs/libparamlist.a .libs/paramlist.o
libtool: link: ranlib .libs/libparamlist.a
libtool: link: ( cd ".libs" && rm -f "libparamlist.la" && ln -s "../libparamlist.la" "libparamlist.la" )
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making all in buftool
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -MT buftool.o -MD -MP -MF .deps/buftool.Tpo -c -o buftool.o buftool.c
mv -f .deps/buftool.Tpo .deps/buftool.Po
gcc -DHAVE_CONFIG_H -I. -I.. -O2 -MT buflist.o -MD -MP -MF .deps/buflist.Tpo -c -o buflist.o buflist.c
mv -f .deps/buflist.Tpo .deps/buflist.Po
rm -f libbuftool.a
ar cru libbuftool.a buftool.o buflist.o
ranlib libbuftool.a
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making install in paramlist
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making install in buftool
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
......... cngpij
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation. -
[SOLVED] Installing Catalyst drivers from AUR
Hi everyone!
Got me an new laptop and have an Radeon HD 3200 in it and hoped to get it working but
I dont managed to get it to work so I hoped someone here could help me
Ive tested the xf86-video-ati
xf86-video-radeonhd
xf86-video-radeonhd-git
But those does get it to work but the performance is really shit and I really want 3d acceleration
so I decided to give the catalyst 9.4-1 from AUR a go.
Installs with yaourt and everything seems to go fine but when I startx it goes back to command line.
My xorg:
Section "ServerFlags"
Option "DontZap" "false"
EndSection
#Section "Module"
# Load "glx"
# Load "dri"
# Load "drm"
#EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
# Option "AccelMethod" "exa"
# Option "DRI" "on"
# Option "ColorTiling" "on"
EndSection
#Section "DRI"
# Group "video"
# Mode 0666
#EndSection
The commented lines were used for the radeonhd driver.
Here is the Xorg.0.log when using fglrx driver:
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH x86_64
Current Operating System: Linux acer 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 15:36:46 CEST 2009 x86_64
Build Date: 15 April 2009 11:01:49AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 12:36:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Card0"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x15c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:5:0) ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0xd0000000/268435456, 0xcfdf0000/65536, 0xcfe00000/1048576, I/O @ 0x00009000/256
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.60.3
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.60.3
Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:05:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.60.3
(II) ATI Proprietary Linux Driver Release Identifier: 8.602
(II) ATI Proprietary Linux Driver Build Date: Apr 1 2009 15:01:03
(II) PCS database file /etc/ati/amdpcsdb not found
(II) Creating PCS database from initial defaults instead
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 5.0
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x9612) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x2499770
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 1 card 5 func 0
(II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 8/8
(EE) fglrx(0): Given depth (8) is not supported by fglrx driver
(EE) fglrx(0): PreInitVisual failed
(EE) fglrx(0): PreInit failed
(II) fglrx(0): === [atiddxPreInit] === end
SetVBEMode failed
(II) UnloadModule: "fglrx"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/lib/xorg/modules//libvgahw.so
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Anyone knows why it isnt working. Im not so good at this so I really have no idea.
Thx in advance for all help I can get
Last edited by lord_zlayer (2009-05-10 12:22:13)Thanks greenfish for your help I changed my xorg.conf to this:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen "aticonfig-Screen[0]-0" RightOf "Screen0"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
And now I get into X with the catalyst driver and it seems much smoother than with
the radeonhd driver.
But now comes the next problem, when I try to launch a 3d application such as tuxkart
I get this outout:
[johan@acer ~]$ tuxkart
Data files will be fetched from: '/usr/share/games/tuxkart'
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 137 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 21
Current serial number in output stream: 21
Anyone knows anything about this? glxgears gives me the same results. -
[solved] subversion and apr-util-iodbc from aur
Hi,
apr-util-iodbc from AUR http://aur.archlinux.org/packages.php?ID=27040
provides apr-util but subversion still says it needs apr-util. It seems ignoring provides directive.
jithine ~ $ yaourt -Qi subversion
Name : subversion
Version : 1.6.5-5
URL : http://subversion.tigris.org/
Licenses : apache bsd
Groups : None
Provides : svn
Depends On : neon>=0.28.2-2 apr-util>=1.3.2-2
Optional Deps : gnome-keyring
kdeutils-kwallet
Required By : kdemod-kdesdk-common
Conflicts With : None
Replaces : None
Installed Size : 24164.00 K
Packager : Allan McRae <[email protected]>
Architecture : i686
Build Date : Sat 26 Sep 2009 09:34:53 AM IST
Install Date : Sun 18 Oct 2009 09:45:43 PM IST
Install Reason : Installed as a dependency for another package
Install Script : No
Description : Replacement for CVS, another versioning system (svn)
jithine ~ $ yaourt -Qi apr-util-iodbc
Name : apr-util-iodbc
Version : 1.3.9-1
URL : http://apr.apache.org/
Licenses : APACHE
Groups : None
Provides : apr-util
Depends On : apr gdbm expat db libldap iodbc
Optional Deps : None
Required By : None
Conflicts With : None
Replaces : apr-util
Installed Size : 756.00 K
Packager : Unknown Packager
Architecture : i686
Build Date : Wed 21 Oct 2009 05:42:10 PM IST
Install Date : Wed 21 Oct 2009 05:42:47 PM IST
Install Reason : Explicitly installed
Install Script : No
Description : The Apache Portable Runtime using iodbc and with KDEmod support
This is what I get when I try to re install subversion
jithine ~ $ sudo yaourt -S subversion
Password:
warning: subversion-1.6.5-5 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
:: unixodbc conflicts with iodbc. Remove iodbc? [Y/n] n
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: unixodbc: conflicts with iodbc
missing dependency for subversion : apr-util>=1.3.2-2
Last edited by jithin1987 (2009-10-21 12:59:13)apr-util-iodbc should have a versioned "provides" in its PKGBUILD, as stated in the comments on AUR. It also needs "conflicts=('apr-util'), instead of "replaces"; no AUR PKGBUILD should ever use "replaces" anyway.
Last edited by byte (2009-10-21 12:44:14) -
Trying to get gnome-main-menu-svn (SLAB) installed from AUR
Having soem troubles installing gnome-main-menu-svn (SLAB) installed from the AUR using yaourt. After getting all the dependencies figured out, there still seems to be problems.
Here is what I have so far:
$ yaourt -S gnome-main-menu-svn
==> Resuming previous build
==> Downloading gnome-main-menu-svn PKGBUILD from AUR...
==> Last 5 comments ordered by date (asc):
Comment by: pressh on 20070926 [10:17:48]
- beagle depends > makedepends
- added instructions for beagle/tracker search functionality to install file
Comment by: pressh on 20071206 [08:22:07]
cleanup
Comment by: raul_nds on 20080118 [02:07:13]
How do I use this? It doesn't appear in the applets menu
Comment by: raul_nds on 20080118 [02:24:48]
Never mind. This removes dbus-sharp after the installation, and then requires it as a dependency. I missed the message
Comment by: laloch on 20080427 [15:12:48]
current revision (451) doesn't work with networkmanager 0.6.6 from extra. Revision 401 from http://svn.gnome.org/svn/gnome-main-menu/branches/gnome-2-22/ works for now.
First Submitted: Tue, 28 Aug 2007 14:30:49 +0000
Last Updated: Thu, 06 Dec 2007 08:22:07 +0000
gnome-main-menu-svn 350-2 (Unsupported): Novell SLED Gnome main-menu applet
==> gnome-main-menu-svn dependencies:
- glib2 (already installed)
- gtk-doc (already installed)
- libgnome (already installed)
- gnome-panel (already installed)
- libgtop (already installed)
- dbus-sharp (already installed)
- networkmanager (already installed)
- hal (already installed)
- wireless_tools (already installed)
- gnome-menus (already installed)
- avahi (already installed)
- libbeagle (already installed)
- libgail-gnome (already installed)
- gnome-screensaver (already installed)
- intltool (already installed)
- pkgconfig (already installed)
- subversion (already installed)
- gnome-common (already installed)
- versionpkg (already installed)
- beagle (already installed)
==> Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> WARNING: This PKGBUILD contains install file that can be dangerous.
gnome-main-menu.install
==> Edit gnome-main-menu.install (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of 'gnome-main-menu-svn'? [Y/n]
==> ----------------------------------------------
==>y
==> Building and installing package
mkdir: cannot create directory `/var/abs': Permission denied
==> WARNING: Unable to write in /var/abs/local/yaourtbuild/gnome-main-menu-svn directory. Using /tmp directory
==> Searching new CVS/SVN/GIT revision for gnome-main-menu-svn
==> retrieving latest revision number from svn... 467
==> newer revision detected: 467
==> modifying PKGBUILD to pkgver=467...
==> Determining latest svn revision...
-> Version found: 467
==> Making package: gnome-main-menu-svn 467-2 (Fri May 16 16:11:44 ADT 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Validating source files with md5sums...
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
At revision 467.
==> SVN checkout done or server timeout
==> Starting make...
/usr/bin/gnome-autogen.sh
checking for autoconf >= 2.53...
testing autoconf2.50... not found.
testing autoconf... found 2.62
checking for automake >= 1.9...
testing automake-1.10... found 1.10.1
checking for libtool >= 1.4.3...
testing libtoolize... found 2.2
checking for glib-gettext >= 2.2.0...
testing glib-gettextize... found 2.16.3
checking for intltool >= 0.25...
testing intltoolize... found 0.37.1
checking for pkg-config >= 0.14.0...
testing pkg-config... found 0.23
checking for gtk-doc >= 1.0...
testing gtkdocize... found 1.10
Checking for required M4 macros...
Checking for forbidden M4 macros...
Processing ./configure.in
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
Running glib-gettextize... Ignore non-fatal messages.
Copying file mkinstalldirs
Copying file po/Makefile.in.in
Please add the files
codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4
from the /aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
Running intltoolize...
Running gtkdocize...
Running aclocal-1.10...
Running autoconf...
Running autoheader...
Running automake-1.10...
Processing ./trunk/configure.in
Running libtoolize...
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
Running glib-gettextize... Ignore non-fatal messages.
Copying file mkinstalldirs
Copying file po/Makefile.in.in
Please add the files
codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4
from the /aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
Running intltoolize...
intltoolize: 'po/Makefile.in.in' is out of date: use '--force' to overwrite
make: *** No targets specified and no makefile found. Stop.
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build gnome-main-menu-svn package.
Any help is appreciated. I really love that menu!I ran yaourt as root to install gnome-main-menu-svn, and it got past that part. Looks like that was a problem with permissions that also needs to be fixed.
Now its telling me that I don't have a high enough version of libnm-glib, it is asking for >= 0.7.0, and I have 0.6.6. I checked the the repos and there does not seem to be a 0.7.0 version or higher available. A suggestion on the gnome-main-menu-svn package page makes a suggestion, but Im not sure how to go about it
current revision (451) doesn't work with networkmanager 0.6.6 from extra. Revision 401 from http://svn.gnome.org/svn/gnome-main-men … nome-2-22/ works for now.
So I either need to get revision 401 from the svn instead, or get networkmanager and its libs at version 0.7.0
How could I go about doing any of these things. I am not familiar with SVN, so go easy on me.
EDIT:
I found a package called networkmanager-beta which seems to be version 0.7.0. Trying to install that with yaourt is unsuccessful as well.
NetworkManager-nm-netlink.o: In function `nm_netlink_get_default_handle':
nm-netlink.c:(.text+0x38): undefined reference to `nl_handle_alloc_nondefault'
nm-netlink.c:(.text+0x63): undefined reference to `nl_handle_set_pid'
collect2: ld returned 1 exit status
make[3]: *** [NetworkManager] Error 1
make[3]: Leaving directory `/tmp/yaourt-tmp-root/aur-networkmanager-beta/networkmanager-beta/src/NetworkManager-0.7.0/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/tmp/yaourt-tmp-root/aur-networkmanager-beta/networkmanager-beta/src/NetworkManager-0.7.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-root/aur-networkmanager-beta/networkmanager-beta/src/NetworkManager-0.7.0'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build networkmanager-beta package.
Also had to do yaourt as root to get that far. Why is it that when you use yaourt as root, it advises you to switch to a normal user, and then the packages will not install correctly unless you do?
So far I have been very turned off by the AUR
Last edited by lungdart (2008-05-17 12:59:29) -
Thunderbird3-x86-64 from AUR and Provider for Google plugin not workin
Hi
I compiled Thunderbird 3 from AUR which has the Lightning plugin in it v1.0b2pre and want Provider for Google (sync google calender to lightning) and I'm not getting it working. I have tried serveral versions including the nightly build and does not install. Has anyone got this plugin working?
MHi
Thanks I've tried that but Provider for Google's preferences is not available for me to select - its greyed out.
I compiled Thunderbird from AUR which had Lightning pre-installed. I disabled it and installed your recommended version - lightning is now 1.0b1 and Provider is 0.6b1. Did you install Thunderbird from extra and not AUR?
M
Okay uninstalled my compiled thunderbird and installed from extra - its called shredder from what I see. Installed lightning and provider as you have indicated and still Provider's preference button is grayed out. is this due to remnents of previous installation? what can I do to fix?
Last edited by majikins (2010-02-27 16:09:11)
Maybe you are looking for
-
Command link / button action is not taking place if i use it in iterator.
Hi, I am new to ADF, i am facing 1 issue while implementing ADF mobile browser application. Issue: command link / button action is not taking place if i use it in iterator. its just refreshing the page it self and displaying as no records. Scenario i
-
My computer wont recognize my Iphone 4
I've plugged my phone into a PC, a Laptop, and a Macpro and every outlet in the house and it still wont say its charging yet when its pluggled in it trickle charges. ive even tried unistalling and reastalling itunes plz help!?!?!?
-
Background job taking more time.
Hi All, I have a background job for standard program RBDAPP01 which is scheduled to run after every 3 minutes. The problem is that it takes very long time at particular time everyday. Like normally it take 1 or 2 second. But at 11.14 it takes approx
-
Save for web greyed out, CS4, 10.5.8 (worked on 10.4)
I have been on the phone with Adobe for over 2 hours...I have reinstalled several times, and even used the cleaning software that they suggested I download and use last night before I called. He's currently checking to see if they can email me the "
-
I get this output when I run a script finding all my modules: agpgart.ko amd74xx.ko ata_generic.ko button.ko cdrom.ko ehci-hcd.ko evdev.ko fan.ko fb_ddc.ko forcedeth.ko hid.ko i2c-algo-bit.ko i2c-core.ko i2c-nforce2.ko ide-core.ko ide-pci-generic.ko