Phtoshop with Terminal Server

Hello.
We are using different products:
Photoshop
6.01
Photoshop CS
2.0
Photoshop CS
4.0
Photoshop   Elements
1.0
Photoshop   Elements
2.0
First question: Is it possible to run all of them with a terminal server? With terminal server I mean every user starts it's own session on the server when starting the programm. It doesn't matter on which kind of server (Windows, Citrix). We just want to know, if it is possible.
If we change our running systems to Windows 7 we have to change our products, too.
Adobe   Photoshop CS5
Adobe   Photoshop CS5
Adobe   Photoshop CS5
Adobe   Photoshop Elements 9
Adobe   Photoshop Elements 9
Can these programms be used with a terminal server?
Thanks a lot for the answer and the heldp.
David

I don't have Elements 1.0, so I can't answer for that version, though as I recall it was pretty closely related to Photoshop 6.0 or 7.0, so it should work.
For all other versions of Photoshop, I have brought them up over RDP and tested them, and they do run.
Note that OpenGL cannot be enabled over an RDP connection for Photoshop CS4 and CS5.x (not even with W7 SP1 and Server 2008 R2), so people expecting to use the several good features ONLY available when OpenGL is enabled may miss them. As with the other versions, the interactivity is generally diminished by remoting the relatively high bandwidth graphics operations across a link, because no matter how fast a link is it's nowhere near as direct as the PCIe buss to a local graphics card.
Generally speaking, Photoshop can be both extremely compute-intensive and put a lot of data out to the UI, so it's not a very good fit to running via Terminal Services. I certainly would prefer running it locally.
I do hope you have a good, responsive LAN between your terminal server and your clients, and a very healthy server.
-Noel

Similar Messages

Access issue with Terminal server in MPLS network

Hi,
i have MPLS network and i have installed windows server 2003 with terminal server.
Problem - every 40 minutes, 2 hours server stopped pinging in spoke network while this worked in LAN,when we trace it by pinging of server IP address we get RTO,
after rebooting the server, we can easily access the server and work for again 40 to 2 hours.i am not able to understand the problem
i have troubleshoot -
1. restarted all network media during the problem
2. reset the LAN card of server
3. restarted the server
after all, it is not resolved.
please help me here to solve this issue.
Thanks,
Damodar
Regards, Damodar

Hi Abrante
thanks for your response but the issue of tftpboot still seems to be there. I am unable to find the issue here. We users try to load their images from the /tftpboot directory on the routers they get the following error messages
Error loading file: errno = 0x3c.
Can't load boot file!!
They are able to connect to another tftpboot server without any issues at all. I am not sure if I have missed out any configuration parameters while enabling tftp. Is there anywhy I can find tftp log files on the server.

Is InDesign Compatible with Terminal Server?

Is InDesign Compatible with Terminal Server 2012 R2?

It's just like any other package manager.
For the most part, the stuff it installs is outside of the realm of what Apple installs, so anything you install via Homebrew will work just as it would - just don't expect the Apple tools to integrate with it.
That also holds true if your're trying to install tools that somehow interact with Apache - the standard Apple install likely won't see the Homebrew-installed tools, so you may have to play games with Apache, or install the Homebrew version of Apache to work with it (and break the links to Server Admin, of course).
So, short answer - will it 'work'? yes - in as much as you can install Homebrew app and tools. Will it integrate with your existing services? probably not, at least not without some extra work.

HP T410 All-In-One (H2W21AA) serious RDP problem with terminal server

Hi there! The scheme is this:
HP T410 All-In-One (H2W21AA)
firmware that was out-of-the-box got some graphical problems with RDP, so i updated the Smart Zero Core Image to the latest Z6A44019 Rev. 1 (11 dec 2013). Graphical problem gone, but new, much more unpleasant problem emerged.
This thin client is connected to Windows Server 2008 R2 SP1, all updates are up-to-date. Terminal Server.
the steps:
- i connect from my machine (W7SP1x64 with latest updates) via RDP (mstsc.exe or tsmmc.mmc - doesn't matter) to the terminal server
- i open up the remote desktop services manager, right click on the user that's connected from the T410
- i hit "remote control" button
- for a moment i see some bits of user's desktop, but in less than a second my RDP session drops with the following error:
Problem signature:
Problem Event Name: APPCRASH
Application Name: mstsc.exe
Application Version: 6.2.9200.16398
Application Timestamp: 5036045e
Fault Module Name: mstscax.dll
Fault Module Version: 6.2.9200.16398
Fault Module Timestamp: 5035e59d
Exception Code: c0000005
Exception Offset: 00000000000f2220
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1049
Additional Information 1: 2328
Additional Information 2: 2328419a4b40d8964e7f792f0ac157d5
Additional Information 3: 3197
Additional Information 4: 319796c94d8825616721d114b3479569
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
the problem is not present for the rest on the terminal users (that are connected from a unix thin clients), i remote control their session without any issues.
Please help me. We are building a new office and planning it for using PoE on every workdesk with your T410 Thin Client. But the fact that i can't manage them remotely brings me a lot of grief.

Hello again! I am sad to tell that my solution was not fully effective - i have got the new problem now
when i remote control session, it connects and works for some time, but at some point (which can be even a second from connection) it disconnects, throws me back to my admin session, and on the client side of t410 the following message appears:

Network printer or local printer with terminal server

Hello
We have a technical issue I believe on invoices we want Business One to automatically generate a printout document but nothing happens although settings are correct
The only thing I do not handle very well is we have busines one running on terminal server ad the printers are local
Can someone advise if automatic printout on local printers is possible with a terminal server ?
thank you in advance

Sap Business One uses the windows printing architecture to print, so.. as long as you can print via windows on the terminal server, SB1 should be able to print it.
One thing to remember is, if you are using RDP, make sure you are using the latest RDP Client, I believe it's version 6.5 at the moment, but a check on windows update should confirm that.
If you want to print locally, you'll need the following to be true:
1. Printer redirection box in the RDP Settings is ticked.
2. The Policy on the terminal server, or terminal server gateway allows you to connect printers via RDP
3. The drivers for your particular printer must be installed on the terminal server (One for your IT Dept).
If all those are met, you should then see, when you go to print, something like <Printer> on <workstaiton>, where printer is the name of your local printer, and the workstation is your local workstation ID.
With a bit of luck, you can then print.
T.

USB redirection with Terminal server

Dear All,
i have a setup where there are two machines, sun ray 1 and sun ray2. and using Windows terminal server
or there is any way to redirect usb scanners from DTU to windows terminal server 2008 session using sun ray software 4.1(no VDI)
thanks

Hi,
apart that your are in the wrong forum (there is a SRSS forum), this is not feasible with WTS ab backend hosts currently, see man page of uttsc (only printers, serial devices and usb disks in general). I redirect only printers to WTS, that's working so far.
An Alternative would be some XP box with the USB Redirector installed using
uttsc -r usb:on xp-box
regards, thomas

Business Object problem with terminal server

Post Author: Yaron
CA Forum: Authentication
Hello, I have a problem running Business Object ( version 5.1.8 at the moment, we might change to XI soon ) on windows 2003 terminal server (citrix) and we have problems from every station without full administrative rights. Giving full access to either the folder or the entire HDD did not help.Difference is the Business Object starts by calling his COM object rather then the normal exe for authentication issues and i think it might be a part of the problem.Thanks in advanace and apologies if I posted in the wrong place.

Hello,
Thanks.
Pinging from client is successful.
And the repository is not accessible from the client side.
We install the client tool in other computer and we still can't connect.
We got message : "Cant access repository"
I'll appreciate your help. Thanks.
Regards,
Eco

SCCM 2007 SP2 R3 client on App V Server with Terminal Server

Hii,
We have the following servers in our environment.
Termincal Services with Server 2008 and App v on same machine
SCCM 2007 SP2 R3. When I installed SCCM client on APP V server yesterday, terminal and App V servers / services stopped working and users were unable to use these services. After uninstalling of SCCM client, its working. What is the recommendation for this
situation? Is it recommended to do not install SCCM client on APP V servers? And if we install SCCM client then APP V services stop working?
Please suggest.
Regards, Syed Fahad Ali

issue has been resolved via below link.
http://support.microsoft.com/kb/2694295/en-us
the client advertise setting was set to Allow virtual application package advertisement. For the
time being we uninstall the SCCM client from all APP V servers. Soon we will test with the mentioned setting in above link.
Thanks for your response.
Regards, Syed Fahad Ali

Terminal Server Farm balancing with down server

I have an 11501 that is balancing connections between my 10 terminal servers.
We are using roundrobin because we were told by TAC that leastconn and ACA do not work well with terminal server environment.
The problem is that whenever a server goes down and comes back up that server is not first inline for people reconnecting. I need help finding a way, once the down server comes back online, to make this server have a higher weight until its connections are about equal to what the other server loads are.
Any help would be greatly appreciated.

Hi,
in my pinion balance leastconn should the job as it only counts the number of connections see :
http://www.cisco.com/en/US/customer/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a008029c621.html#wp1038118:
balance leastconn - Least connection algorithm. This balance method chooses a running service that has the fewest number of connections.
We do not recommend that you use UDP content rules with the balance leastconn load-balancing algorithm. The service connection counters do not increment and remain at 0 because UDP is a connectionless protocol. Because the counters remain at 0, the CSS will give inconsistent results.
So if your terminal service is a running via UDP you are having a problem but in any other case it should do the job from the description given above.
The balance aca will fail due to the fact that the first and keepalive is very fast and so it can not determin the real load what you already found out.
Which method did you use balance aca or balance leastconn?
Cheers,
Joerg

Terminal server DLU policy only - nothing else applies

I have a Windows Server 2003 with Terminal Server. When a user logs
in I want a DLU policy to take affect, but nothing else. No bundles
installed, no other policies applied. What is the best way to make
sure that it works this way? During testing, I logged in as a user
and a bundle installed an app.
Thanks,
Ken

Configure System Requirements on the Bundles/Policies so they are not
effective for the Terminal Server?
On the settings of the Terminal Server Object, you could also set the
'Bundle Management" to disabled.
On 5/2/2012 1:24 PM, KeN Etter wrote:
> I have a Windows Server 2003 with Terminal Server. When a user logs
> in I want a DLU policy to take affect, but nothing else. No bundles
> installed, no other policies applied. What is the best way to make
> sure that it works this way? During testing, I logged in as a user
> and a bundle installed an app.
>
> Thanks,
> Ken
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

W2k3 End of Support 14 July 2015 + Terminal Server

Hi, all!
We use W2k3 for new installation projects with Terminal Server Licencing. We activate now our Termainal Server Licencing on https://activate.microsoft.com. After that we install CALs licenses per users and use this PC for our old applications.
As Microsoft will support activation our servers licencing after 14 July 2015 when W2k3 is out of support?
Thanks
P.S: If I choose wrong place with my question please give me a link

Hi, all!
We use W2k3 for new installation projects with Terminal Server Licencing. We activate now our Termainal Server Licencing on https://activate.microsoft.com. After that we install CALs licenses per users and use this PC for our old applications.
As Microsoft will support activation our servers licencing after 14 July 2015 when W2k3 is out of support?
Thanks
P.S: If I choose wrong place with my question please give me a link
If it is already activated then it will remain activated. If you are asking if you will need to do extra activation in the future after that the OS gets out support then you might to check with a Microsoft Activation Center in your country.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Problem with Photoshop hangs/freezing for users on a terminal server

Dear Forum!
I'm having some trouble with Photoshop freezing over a period of ~20 minutes when you (1.) user the eraser with special brushes and (2.) copy and paste material from a PDF to Photoshop. As you might notice by the size of this post i'm getting quite depserate over here and need some help.
A Little background information...
Photoshop CS6 is installed on a terminal server with ~25 Active users where 3 of them are using Photoshop.
The operating system on the server is Windows Server 2012 R2.
There are no additional add-ons just a plain installation of Photoshop in that matter.
The server uses 40-60% of the memory most of the time (mostly a bit less, some times a bit more but never 100%) and 40% of the CPU.
There's enough space free on the disc.
The problem in detail...
There are two occasions where the freezing has occured most of the time. After it hangs for the first time, it will happen everytime you do any of the operations over a period of ~20 minutes and it's Mutual for all users. When it freezes, the whole terminal session freezes but the program i still responding (it's not getting set to "not responding") when viewed from Another user through the task manager. Ending the process as an administrator sometimes work, although from the moment i end he proces it takes about 10-60 seconds Before the program actually Closes and the user gets back Control. The easiest thing to do most of the time is if an administrator forces them to log out.
1. The first occasion is when you use the eraser with a brush that's not standard but manually added. The names of the brush packages used are:
Extacy__Elemental
KKC_Fractal
Kornkid's_Grunge_Set
and the problem is with all brushes inside those packages. The way i evoke the problem is the following:
     1. Start Photoshop
     2. Create new
     3. Fill the background with any color
     4. Select the eraser tool
     5. Change the brush to one of the ones mentioned above
     6. Program freezes
2. The second scenario when the problem occurs is when the users copy something from a PDF to Photoshop. The way i evoke this is:
     1. Open a PDF
     2. Select area and copy it
     3. Open Photoshop
     4. Create new
     5. Paste into Photoshop
     6. Program freezes
Solutions we have tried so far...
I've been working on this for several round now and i'm not entirely sure on what exactly i have done. I will try and do the following solutions once more but i'm pretty sure that i have tried most of them.
Update graphic card drivers.
Resetting all Tools:
     1. Select options for a tool
     2. choose "Reset all Tools"
Resetting presets:
     1. Hold ctrl + shift + alt while Photoshop is starting
     2. select "yes"
Tested if it matters if i have a pen connected or not, which it doesn't.
Removed the special brushes (but it still freezes when copy/paste from PDF)
Removed "save in background" and "automatically save recovery information" options
Updated to latest version.
Turned off OpenGL
Solutions i haven't, but will try...
Reinstall Photoshop
Change font preview size
     1. Go to "type"
     2. select "Font prview size"
     3. select "none"
Delete system font cache
Close all Adobe applications including the Creative Cloud desktop app (if installed).
Navigate to \Windows\ServiceProfiles\LocalService\Appdata\Local
Delete the *FNTCACHE*.DAT or *FontCache*.dat files.
NOTE: The asterisk (*) indicates various numbers, letters, or words, such as FontCache-S-1-5-21.dat or COFFfntCache.dat.
Delete Photoshop font cache
Exit Photoshop and the Creative Cloud desktop app (if installed).
Navigate to the appropriate folder
Photoshop CS6 and earlier.
Windows XP: \Documents and Settings\Local Settings\Application Data\Adobe
Windows 7: \Users\[user name]\AppData\Local\Adobe
Photoshop CC and CC 2014
Windows 7 and 8: \Users\[user name]\AppData\Roaming\Adobe\Adobe Photoshop CC or CC 2014
     3. Delete the TypeSupport folder (Photoshop CS6 and earlier) or the CT Font Cache folder (Photoshop CC and CC 2014), and empty the trash.
Some links i have been using...
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html#troubleshoot
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html

Hi Mylenium!
Thanks for your reply but since the users work on the terminal server via remote dektop the only data sent through the network is a "Picture" of what is happening on the server. All the operations are handled on and by the server and nothing is executed on the users local machine. Also all files are stored on the server therefore the load on the network is minimum.
We are not the first in the World to run this setup and i know that this is possible to do since i've read about others running PS like this.
Kind Regards,
J. Alm

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I connect to a terminal server with my mac book pro

How do I connect to a terminal server with my mac book pro

Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field. If that does not work then use the IP address to connect.

Server 2008 R2 Terminal Server c0000005 and c0000006 errors with KERNELBASE.dll error in RDP sessions.

We installed a new Server 2008 R2 server this spring. It is configured as a Terminal Server with 16 Wyse t10 thin clients connecting with RDP. We are a small resort so we run Springer Miller Host and SpaSoft. Ever since moving from PCs to the thin clients
and TS we have been seeing SpaSoft randomly crash with KERNELBASE.dll errors and also a lot of c0000005 and c0000006 errors. Springer Miller support says its a Microsoft Networking issue so no help there. The company we worked with to install this has no clue
so I hope to reach out to this community to solve this. I can also open support case with Microsoft Support but I am not sure if they will be of any help. Here are some examples of the errors:
"Event 1000
Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x0eedfade
Fault offset: 0x0000c42d
Faulting process id: 0x3718
Faulting application start time: 0x01cf9ac7922487e9
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: cfdcf9a9-06ba-11e4-a5af-000c298d9aa5"
Also:
"Faulting application name: VH.EXE, version: 18.80.430.0, time stamp: 0x3f73b447
Faulting module name: VFP8R.DLL, version: 8.0.0.3117, time stamp: 0x3f73c232
Exception code: 0xc0000006
Fault offset: 0x0001d598
Faulting process id: 0x2bc8
Faulting application start time: 0x01cf99297ee1742f
Faulting application path: J:\HOSTPLUS\fxp32\VH.EXE
Faulting module path: J:\HOSTPLUS\fxp32\VFP8R.DLL
Report Id: 5fbc65c4-055c-11e4-a5af-000c298d9aa5"
And:
"Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x2aa0
Faulting application start time: 0x01cf988e6770e619
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: unknown
Report Id: 01029179-04b9-11e4-a5af-000c298d9aa5"
There are no network specific errors in any of the logs. I am thinking that SpaSoft needs to be run as an administrator but I am not sure how to do that in this environment. We have disabled DEP for all but essential Windows processes. All of the firewall
and AV has been completely disabled, and still getting these errors. Is there a way to run these applications as admin without the user actually being an admin? Should I go ahead and open a Microsoft support case? Thanks

Hi,
Thank you for posting in Windows Server Forum.
Explanation
The indicated program stopped unexpectedly. The message contains details on which program and module stopped. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
User Action
If an error report was generated for this error, you might be able to obtain more information about the error by sending the report to Microsoft for analysis.
Yeah, you can open a support case with Microsoft as they will help and guide you for proper solution. You can go through
this source article.
Hope it helps!
Thanks.
Dharmesh Solanki

Phtoshop with Terminal Server

Similar Messages

Maybe you are looking for