Physcial DC problems in a Virtual DC environment

I currently run 2 physical hosts with vmware ESXi 5.1 and 2 virtual DCs on each host. I do not have a physical DC.
All servers run Windows 2008 R2 Standard Edition. All of my branch sites are also running Virtual DC's.
My idea was to create a clean free Physical DC in the same LAN in the event that my virtual DC's went down for some reason - god knows for now.
I have read there have been issues when connecting to the physical DC when the virtual DC went down.
In my test lab, I have noticed that my clients would not automatically connect to the physical DC after I shut down the virtual DC. even after leaving it On for 10 minutes. My DHCP scope does point to the Physical DC in DNS - Anything I am missing?
Is there a way to get my end computers to authenticate to the Physical DC in case the virtual DCs went down automatically after a few mins.

Hi,
Please make sure your client have not only one DNS server, Please confirm the physical DC is the GC.
The similar thread:
When Local Domain Controller is down other DC's wont authenticates users
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b371429c-9a31-4b06-bad3-792e75bd2217/when-local-domain-controller-is-down-other-dcs-wont-authenticates-users?forum=winservergen
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Problems moving distribution from one environment toanother

Hi all,
Problems moving distribution from one environment to another
Initially we have the environment as below:-
Production :-
Server1 : AIX Environment manager (dealing with conductor, web, db)
Server2 : NT Node manager (dealing with outlook)
Development :-
Server3 : NT Environment manager (dealing with conductor, web, db)
Server4 : NT Node manager (dealing with outlook)
Currently, we intended to change the production environment via
changing the Server1 to Server3, as the new environment
manager, while the node manager unchanged.
Things that we've done in Server2, the node manager for
production environment:-
1) Pointing to Server3 instead of Server1, by changing Forte
Control Panel and changing registry entry.
2) Re-deploy the needed libraries in the new environment, so
that it can has the updated version.
3) Re-olegen the vb component.
4) Re-deploy the whole application.
However, we're facing the following problems/error messages
for the newly deployed Forte application:
1) Failed to bind to object named (/wfuseraccessobj/odbso/1)
2) Failed to bind to object named (/wfuseraccessobj/emailso/1)
These errors are actually refer to the libraries that used by
Conductor in order to perform database retrieval, and emailing
functions. These functions were worked properly in the initial
environments.
NOTE: The first error could be okay when refreshing the internet browser
(as our system is a web-based system), somehow it keeps on occurring every
now and then.
Please advice on this matter and reply ASAP as the project
delivery is crucial for our side.
Errors:
ERROR 1:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: creating engine object
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: engine object created
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: attaching database
service
23-Nov-1999 17:38:33: EngineShell.SetEngine: Unit1: connected to database
23-Nov-1999 17:38:33: EngineShell.SetEngine: Cold-starting engine... 0
23-Nov-1999 17:38:35: EngineShell.SetEngine: Unit1: registering shell
anchor
23-Nov-1999 17:41:31: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:33: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:54: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:56: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
ERROR 2:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: creating engine object
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: engine object created
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: attaching database
service
13-Oct-1999 16:45:43: EngineShell.SetEngine: Unit1: connected to database
13-Oct-1999 16:45:43: EngineShell.SetEngine: Cold-starting engine... 0
13-Oct-1999 16:45:47: EngineShell.SetEngine: Unit1: registering shell
anchor
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: A TOOL execution exception caught in ReadyAction().
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
SYSTEM ERROR: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
Class: ErrorException
Error #: [2, 122]
Detected at: OfferedActivity.Activity.AbortProcessInException()
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: A TOOL execution exception caught in ReadyAction().
Class: ErrorException
Error #: [2, 107]
Detected at: OfferedActivity.ReadyAction
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: The attribute firstReviewerID is not available in this
accessor.
Class: qqsp_UsageException with ReasonCode: SP_ER_PARAMETERERROR
Error #: [15, 1206]
Detected at: AttributeAccessor.AttributeAccessor.Find()
Last TOOL statement: method TempReview.OnReady
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
Begin Stack Backtrace
==========================================================
Trace caused by a segmentation or access violation in the Forte executable:
Application: WFEngineUnit_cl1
Platform: PC / NT
Partition: WFEngineUnit_cl1_Part1
Generated: 02-Jun-1998 19:10:20
By: ftexec Version 3.0.G.2
Fault at 13-Oct-1999 16:49:58, pid '2441', node 'CHARON':
User Name: SYSTEM
Machine Name: CHARON with 2 CPU(s)
OS version 4.0
Loading symbols for ...
d:\forte\install\bin\QQCT.dll
d:\forte\install\bin\QQSH.dll
d:\forte\userapp\wfengine\cl1\wfengi1.exe
d:\forte\install\bin\QQKN.dll
d:\forte\install\bin\QQSM.dll
d:\forte\install\bin\QQDO.dll
d:\forte\install\bin\QQCM.dll
d:\forte\install\bin\QQRT.dll
d:\forte\userapp\ofcustom\cl0\libofcus.dll
d:\forte\install\bin\QQHD.dll
d:\forte\install\bin\QQDB.dll
d:\forte\install\bin\QQDS.dll
d:\forte\install\bin\QQDD.dll
d:\forte\userapp\wfcustom\cl0\libwfcus.dll
d:\forte\userapp\wfenvdef\cl1\libwfenv.dll
d:\forte\install\bin\QQEM.dll
d:\forte\install\bin\QQFO.dll
d:\forte\install\bin\qqtlnt.dll
d:\forte\install\bin\w3tpwss.dll
C:\WINNT\System32\rpcltc1.dll
C:\WINNT\System32\comctl32.ocx
d:\forte\install\bin\QQRP.dll
C:\WINNT\System32\OLEPRO32.DLL
C:\WINNT\System32\WINSPOOL.DRV
C:\WINNT\System32\MFC40.DLL
C:\WINNT\system32\OLEAUT32.dll
C:\WINNT\System32\rnr20.dll
C:\WINNT\System32\IMM32.dll
C:\WINNT\system32\msafd.dll
C:\WINNT\System32\wshtcpip.dll
C:\WINNT\System32\WS2HELP.dll
C:\WINNT\System32\WS2_32.dll
C:\WINNT\System32\WSOCK32.dll
C:\WINNT\System32\MSVCRT40.dll
C:\WINNT\system32\COMCTL32.dll
C:\WINNT\system32\ole32.dll
C:\WINNT\system32\SHELL32.dll
C:\WINNT\system32\comdlg32.dll
C:\WINNT\system32\ADVAPI32.dll
C:\WINNT\system32\RPCRT4.dll
C:\WINNT\system32\USER32.dll
C:\WINNT\system32\GDI32.dll
C:\WINNT\system32\KERNEL32.dll
C:\WINNT\System32\ntdll.dll
C:\WINNT\system32\MSVCRT.dll
C:\WINNT\System32\MSVCIRT.dll
Stack backtrace ...
wfengi1 004edd89 (017bb4f0,019e85e0,046bfe34,016a0c08)
wfengi1 004e29d1 (017bb4f0,019f1fc0,00000000,00f039d0)
wfengi1 004e2ecb (017bb4f0,00000024,019e85e0,019f1f98)
wfengi1 004e4503 (017bb4f0,019e85e0,01a20025,01a22868)
QQKN 005dc66f (017bb4f0,019e85e0,019f0025,01a22848)
QQKN 005df7a5 (017bb4f0,019e85e0,01a22890,01a22848)
QQKN 00697109 (017bb4f0,00000000,00f039d0,00f039d0)
QQSH 0027c47b (017bb4f0,0161b9d8,00000000,017bb4f0)
QQKN 0067f24f (01619c14,017bb4f0,f34a8eb8,046bffb8)
QQKN 0067e2d5 (01619c14,00000000,00000000,00f039d0)
MSVCRT 780099ed (00f039d0,00000000,00000000,00f039d0)
KERNEL32 77f04f2c (78009990,00f039d0,00000000,00905a4d)
QQCT 00000000 (00000000,00000000,00000000,00000000)
End of Stack Backtrace
=========================================================
13-Oct-1999 16:50:10: Build: Exception raised of type TimerException and
severity 3: Exception in timer OneWorkingDayTimer (3) will cause an abort
of
process LMSPD (10).
SYSTEM ERROR: Exception in timer OneWorkingDayTimer (3) will cause an abort
of process LMSPD (10).
Class: ErrorException
Error #: [8, 111]
Detected at: ElapsedTimer.PTimer.FinishExpiration()
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: qqlo_LomTaskInitiator::Run: Asynchronous task exiting:
The following error was not on the error stack:
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: TMgr.Terminate: fatal error terminated partition

Lori,
Yes. I organize all my film rolls by name. If I import new pictures that don't fit into an existing film roll name I create a new film roll with a name appropriate to the theme of the new pictures. No problem with this.
However, if I import pictures at a later date that I want to move to an existing film roll, there is a problem if scrolling is required to bring the existing film roll into view in the display pane.
For example, I have a film roll called "Flowers & Plants". I later import a roll that contains some pictures that I want to move to the Flowers & Plants roll. The Flowers & Plants roll is not visible in the display pane so scrolling is necessary. I select and drag the new pictures up (the new film roll is always at the bottom of the display pane) to reveal the Flowers & Plants film roll. However, the film rolls scroll by so fast it is virtually impossible to stop on the Flowers & Plants roll's title bar.
This was not a problem with earlier versions of iPhoto on slower Macs. I really appreciate the much improved iPhoto/Mac performance but I wish there were some way to control this aspect.
I hope this helps.
Thanks.
Mike

How can I follow slurl's which are web short cuts into secondlife virtual world environment keeps telling me no association present and not available to be associated in the options/applications list

Secondlife.com has a system to access their world straight into their virtual world environment called "slurls" which can be used on any webpage. It appears that in IE this system works correctly, but not in Firefox.
See: http://slurl.com/about.php
Just keeps telling me that no association is available, but there is nothing in the options/applications list to create this association with as "secondlife" protocol is not listed so cannot connect it to the phoenix viewer I use for access to this virtual world grid
With over 1.3 million users of this world it is not an insignificant facility to be missing.

To use servlets u have indeed to update your web.xml...Well I'm not sure this is relevant to your case anyway.
You have to add a <servlet> element to this file.
Something like this:
<servlet>
<servlet-name>blabla</servlet-name>
<servlet-class>blablapackage.Blablaclass</servlet-class>
<init-param>...</init-param>
</servlet>
Now this may not solve your problem. Make sure you refer to your servlets using their full qualified names.btw, just to be sure, what is your definition of "servlet"? (i mean: any java class or only javax.servlet.Servlet)

NFirefox will not allow me to click on a link without switching to another program first. The version is 3.6.8. This problem makes Firefox virtually unusable. Help!

Firefox will not allow me to click on more than one link in a sequence. After one click, I am forced to switch to another active application before returning to Firefox and clicking on another link. I have seen this problem posted by others, but I can't find an answer by Mozilla. Since this problem makes Firefox virtually unusable (version 3.6.8) I would hope that Mozilla would offer an answer ASAP. Until then, I'm stuck with Explorer.
== This happened ==
Every time Firefox opened

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Problem with the virtual machine

Hello.
i've encountered problem with the virtual machine. Java instance is reseting sometimes. I found message in dev_server0 there is:
<b>
[Thr 6] JLaunchIExitJava: exit hook is called (rc = 666)
[Thr 6] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
</b>
in dev_jcontorol:
<b>
[Thr 1] Thu Mar 13 15:58:39 2008
[Thr 1] JStartupICreateProcess: fork process (pid 16077)
[Thr 1] JControlICheckProcessList: process server0 started (PID:16077)
</b>
where i can looking the reason of this?
regards,
Denis

Hi Denis,
This looks like a memory issue, similar problems have been posted on this forum before.
Change the following params.
-XX:PermSize=2048m
-XX:MaxPermSize=2048m
Also,
See SAP note 709140 and the referenced notes.
Regards,
Siddhesh

UNIX: problem running an DEV & QA environment using form/report servlets

UNIX: problem running an DEV & QA environment using form/report servlets
I am trying to setup on one server an DEV and QA environment using the Forms Servlet, Forms Listener Servlet and Report Servlet.
I think I have the Forms Servlet and Forms Listener Servlet running properly. The problem is setting up the DEV and QA environment for running reports.
For example, when in DEV environment I would like to run a report from a directory specified in the REPORTS60_PATH. This doesn't seem possible.
It might be easier if I describe my configuration first:
DEV: run all forms and reports from the directory /data/release/dev
QA: run all forms and reports from the directory /data/release/qa
---DEV & QA Settings Forms Listener Servlet:
zone.properties:
# DEV
servlet.fl60dev.code=oracle.forms.servlet.ListenerServlet
servlet.fl60dev.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/dev.env
# QA
servlet.fl60qa.code=oracle.forms.servlet.ListenerServlet
servlet.fl60qa.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/qa.env
---DEV & QA Settings Forms Servlet:
servlet.f60servlet.code=oracle.forms.servlet.FormsServlet
--- Settings for Reports Servlet:
servlet.RWServlet.code=oracle.reports.rwcgi.RWServlet
Custom Env files since we are using Developer 6i Patch 7
dev.env and qa.env
Here I specify FORMS60_PATH and REPORTS60_PATH,
eg: DEV -> FORMS60_PATH=/data/release/dev
REPORTS60_PATH=/data/release/dev
likewise for QA ../qa
In the formsweb.cfg file i have something like:
[dev]
serverURL=/servlet/fl60dev
form=test.fmx
[qa]
serverURL=/servlet/fl60dev
form=test2.fmx
I have tested the following and they work without problems:
1. forms listener test page, eg: http://webserver:7777/servlet/fl60dev
2. running forms from the 2 environments
eg: http://webserver:7777/servlet/f60servlet?config=dev
this runs the form in the FORMS60_PATH (/data/release/dev)
Now my problems start with Reports.
When I run a report from forms (using run_report_object) it will not run any reports
as specified in the REPORTS60_PATH
Even using this url:
http://webserver:7777/servlet/RWServlet?server=rep60&report=test.rdf&destype=cache&desformat=html&
userid=scott/tiger@test9i
It NEVER seems to pickup and use the REPORTS60_PATH. I have tried nearly everything.
I have gone throught the instructions in "Integrating Oracle9iAS Reports in Oracle9iAS Forms -
White Paper"
(http://otn.oracle.com/products/forms/pdf/277282.pdf)
and Forms6i Patch 7: Oracle Forms Listner Servlet for Deployment of FOrms on the Internet
(http://otn.oracle.com/products/forms/pdf/p7listenerservlet.pdf)
plus any other documents in metalink relating to forms, or report servlets. I am
totally confused, please help.
I have tried setting the REPORTS60_PATH in the following files without success:
custom.env (as specified by initArgs=EnvFile in zone.properties)
jserv.properties
in the zone.properties I have tried to set a custom env file for the report servlet:
servlet.RWServlet.code=oracle.reports.rwcgi.RWServlet
servlet.RWServlet.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/dev_rep.env
NO LUCK.
The only place that I can set the REPORTS60_PATH
is in "[6iserver home]/reports60_server" file when I start the reports server (did I even
get this right - I do have to have a reports server running don't I?)
Does this meaan I have to run multiple report servers for each of my environments?
Based on all the documentation I thought that REPORTS60_PATH as specified in the files relating
to the forms servlet would be the place to specify the path.
As you will understand I am getting really fustrated with this and it seems to
me that the reports servlet configuration in 6i is really half baked and since 9i
is coming out it will never be fixed.

I am even not able to run forms servlets from two different forms60_path, Is there any configuration do you make other than what you have mentioned in this post.
I already open a TAR in this regard, I am still waiting reply from ORACLE.
Thanks,
Shaik Ather Ahmed

Interested in TFIN50/52 in a virtual classroom environment?

Sorry for posting an advertisement like this but I wanted to reach as many interested parties as possible...
NA SAP Education is offering, for the very first time, TFIN50 and TFIN52 through our virtual classroom environment. If you are interested, click through to:
TFIN50 - http://www.sap.com/usa/services/education/tabbedcourse.epx?context=%5b%5b%7cTFIN50%7c%7c3%7c092%7cUS%7c%5d%5d%7c
TFIN52 - http://www.sap.com/usa/services/education/tabbedcourse.epx?context=%5b%5b%7cTFIN52%7c%7c3%7c092%7cUS%7c%5d%5d%7c
The academy will be offered beginning at the end of April and again in Q3.
Please let me know if you have questions.

dears
My Exam on Delhi - India
and as i now the pass mark in exam it's 66% in SAP FI
so in Multiple chose is't 5 from 5 for correct and the not corect 0 from 5 ??? or 3 from 5 ?
please advise me
thanks and best regards
Edited by: sugairmk on Mar 31, 2010 7:42 AM

Problem with creating virtual column

Hello,
We've got problem with creating virtual column.
There is table R_T that contain columns R_ID and L_ID, we would like to create virtual column RL_ID that contains sth like 'R_ID-L_ID' (R_ID, L_ID and RL_ID are varchars).
According documentation we've tried:
alter table R_T add column (RL_ID varchar2(60) generated always as (R_ID||'-'||L_ID) VIRTUAL)
but getting
ORA-00904: : invalid identifier
00904.00000 - "%s: invalid identifier"
Have no idea where is the problem.
Table, columns names are little different but contains only capital letters A - Z and underscore "_".
Has anyone idea?
Thanks a lot.

Strange...
This does work for me :
Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
Connected as dev
SQL>
SQL> create table r_t (
2   r_id varchar2(25),
3   l_id varchar2(25)
4 );
Table created
SQL> insert into r_t (r_id, l_id) values('R','L');
1 row inserted
SQL> alter table r_t add (rl_id varchar2(60) generated always as (r_id||'-'||l_id) virtual);
Table altered
SQL> select * from r_t;
R_ID                      L_ID                      RL_ID
R                         L                         R-L
SQL>

Installation of xMII into a virtual server environment

Can we deploy xMII into a Virtual Server environment? If so, are there any downside issues we need to be aware of before considering such an option?
Appreciate any ideas

Jaremy,
Can you please qualify what you meant by "typically". Is there any benchmark study on performance in production that you are basing on? Otherwise, what else could be the reason you do not advise in production?
We are currently installing xMII in Dev VMWare environment. Our company is seriously advising only VMWARE for Dev and test. If you have any benchmarks, that will help.
Thanks.
Prasad Kodukulla.

Is there any report in SCCM 2012 to list out all the physcial machine and all the virtual machine?

Is there any report in SCCM 2012 to list out all the physcial machine and all the
virtual machine?
and list all VMs for each physical server.

Hi,
there is no such builtin report but you can easily crete one as all information is in the database.
http://www.scconfigmgr.com/2014/01/24/create-custom-reports-for-configmgr-2012-with-report-builder/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Problem with Windows virtual environment:

I have parallels virtualization and Win7 - 32bit. I cannot download any exe in the Windows environment - the file downloaded is just 1-2 KB whatever be the size. When I run the .exe file, I get "not a valid Win32 app...". I tried Firefox, Chrome, Java, IE9, etc.
I tried all of the following and the problem continues
1. I tried Virtual Box (Oracle) virtualization software
2. Windows XP, Windows 7 - 64
3. Disenable Norton Anti-virus in Mac environment
I tried to download the .exe in Mac environment and then open it in Windows environment. The exe did not get properly downloaded in Mac environment; and I got the same error in Windows environment.

It appears that somehow, Microsoft Fusion Assembly binding logging was turned on and many of the temp folders located at c:\users\username\AppData\Local\Microsoft\Windows\InetCache\IE were filling up with hundreds of thousands of Fusion HTM log files.
This is controlled by an entry in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion\ForceLog which was set to 1. Hopefully, setting it back to zero will fix the issue. As a result of figuring this out, I have recovered almost 80GB of disk
space occupied by the log files.
I thought WinDirStat would show me what I needed to know, but it turns out TreeSize (which I've used in the past) works much better.
Russ

Installation problem w/ Java Run Time Environment 1.2.2

Steps to reproduce error:
1.On Windows 98 I install Java Run Time Environment 1.2.2
2.I try to launch Java Plug-in Control Panel from Windows Start menu
Error message:
JAVAW caused an invalid page fault in
module SYMCJIT.DLL at 0167:500bf974.
Registers:
EAX=00000e03 CS=0167 EIP=500bf974 EFLGS=00010206
EBX=006538e0 SS=016f ESP=0063f838 EBP=00000e7f
ECX=0000009f DS=016f ESI=00000e7f FS=0e77
EDX=00000003 ES=016f EDI=05110010 GS=0000
Bytes at CS:EIP:
f3 a5 ff 24 95 48 42 0c 50 8d 49 00 8d 74 31 fc
Stack dump:
500bf8c7 0000027f 500c42b0 5007cc24 05110010 00000e7f 0000027f 00760ab0 00000283 0069a4a8 006538e0 0063f8e4 00653928 05110010 006538e0 00000e7f
Is there a fix for this?
Thanks
-DK

This dll does not recognise the Pentium 4 processor. You need to update the JRE. It is a well recognised problem. Search the forums (and Google) using "symcjit pentium 4" to obtain more information.
Hope this helps.--
<sig> http://www.itswalky.com http://www.crfh.net </sig>

10.6.8 Causes New Problem with Mixed Graphics Hardware Environment - Suggestions?

Hi. After installing the latest Mac OS update (10.6.8), I can no longer boot my 5,1 Mac Pro into its Mac OS partition. An undefined display (and graphics card) now seems to be used as default, rather than the supported display/hardware, so I cannot interact with the user interface. I simply have an inoperable blue screen on the correct display. I have 2 graphics cards in my Mac Pro: a supported GT120 (solely for the purpose of booting/using Mac OS), and an unsupported HD6970 (used extensively for Windows 7 3D gaming, in Slot 1). Until this latest OS release, I could successfully boot and use my computer in both Mac OS and Windows environments. I encountered other problems because of this mixed graphics environment, like an inability to put the system to sleep without having the Mac Pro PCI fan unnecessarily ramp up to full speed after waking - but it would always work correctly when first booted. (I have contacted Apple Support about this sleep issue, but they do not support my configuration.) Does any boot command exist to force the use of the supported graphics card? Or, do kext files exist to enable the Mac OS to at least recognize (not use) the 6970 card? With the 6970 removed, I have no problems booting the Mac OS, but I do NOT want to remove my hardware card every time I want to shift to the Mac OS. Do anyone have any suggestions?

Thanks for the suggestions.
First, I cannot swap graphic cards in PCI slots, because the 6970 only operates correctly in slot 1 (the high-speed graphics slot). I may have to revert to the prior OS release, but what about next month, with Lion?
I am familiar with Netkas.org (I will probably try it or Groths.org next, thanks). One of my previous graphics cards was a flashed 4970. I do not have access to the prelease Lion kext files that he suggests using. Full flash support does not appear to yet exist for the 6970, much less the HD 6990 or GTX 590 that it appears I may need next.
Ideally, the Mac Pro firmware should ignore any attempted bus communication with an unrecognized PCI card. Currently, it appears that the unsupported 6970 can cause boot or run-time problems (I also have occasional freezes during Mac OS hardware interaction like writing a file to disk). Note that I have never had any problems arising from my unsupported Windows 5.1 PCI sound card, however.

Problem with a virtual KYF

We have a virtual key figure, a employee counter.
It works fine when we run the query, but it gives a cero when we refresh it.
Any help will be helpful
Thanks a lot
Ignacio

Ignacio,
I think you have to explain with more details your problem...
Bye,
Roberto

Problem register Oracle Virtual Directory to WebLogic - urgent ... pls help

Hi,
I'm a new to Oracle product and would like to install and run Oracle Virtual Directory for the following purpose:
Using LDAP client that connects to OVD and to issue ldapsearch command line based on the attrbiutes and filters of each one of the two Directories behind the OVD..
|-- Tivoli LDAP directory
LDAP client -> OVD ---|
|-- MS AD
I have downloaded the identity management package 11g and install only the OVD on Windows 2003 standard machine.
I then realized that I have to install the WebLogic package to have WEB UI to the OVD admin.
So I downloaded the WebLogic 10.3.1.0 package and install it.
I followed the installation instructions of
'Installing and Configuring Only Oracle Virtual Directory Without a WebLogic Administration Domain' at http://download.oracle.com/docs/cd/E12839_01/install.1111/e12002/ovd.htm#CIHFFAFH
and complete the installation.
Notice that the OVD and the WeblOgic SW are installed on the same Windows machine.
After that I had to register Oracle Virtual Directory with the WebLogic Administration Server.
Running the command-line I got the following error:
Deploying NonJ2EEManagement Application...Done
Command failed: Exception while registering the instance
Details are logged in C:\....\provision.log
opmnctl registerintance: failed
The provision.log file has the following exception call stack:
Aug 18, 2009 4:08:05 PM oracle.as.config.provisioner.InstallerCmdLine logInitialCommand
INFO: Start of command: [registerinstance, -adminHost, 127.0.0.1, -adminPort, 7001, -adminUsername, weblogic, -oracleHome, C:\oracle\product\11.1.1\OracleIDM_1, -oracleInstance, C:\as_admin\asinst_1]
Aug 18, 2009 4:08:14 PM oracle.as.config.provisioner.InstallerCmdLine handleRunFailure
SEVERE: Command failed:
oracle.as.config.ProvisionException: Exception while registering the instance
     at oracle.as.config.impl.OracleASInstanceImpl.register(OracleASInstanceImpl.java:239)
     at oracle.as.config.provisioner.commands.RegisterInstanceCommand.execute(RegisterInstanceCommand.java:11)
     at oracle.as.config.provisioner.InstallerCmdLine.run(InstallerCmdLine.java:86)
     at oracle.as.config.provisioner.InstallerCmdLine.main(InstallerCmdLine.java:44)
Caused by: oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
     at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:595)
     at oracle.as.config.impl.OracleASInstanceImpl.register(OracleASInstanceImpl.java:219)
     ... 3 more
Caused by: oracle.as.config.ProvisionException: The AdminServer is not enabled for NonJ2ee applications.
     at oracle.as.config.impl.RuntimeServiceConnection.isValidJrfInstall(RuntimeServiceConnection.java:547)
     at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:201)
     at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:587)
     ... 4 more
Any thoughts ?

Hi,
I am also facing the same problem. I have oracle internet directory 11.1.1 installed without domain. I then installed weblogic 32bit exe on same windows server.
while registering getting the same error. I think it is because of bit compatibility. OID is 64bit and weblogic is 32bit. Not sure.
thanks

Physcial DC problems in a Virtual DC environment

Similar Messages

Maybe you are looking for