Physical connection of multiple cameras with EVS

how i can connect 5 GIGE vision cameras with EVS and i`m using vision builder as software and i have terminal block that its manual
http://www.ni.com/pdf/manuals/374051c.pdf
the number of inputs of it not enough to the 5 cameras i wanna connect.

I have for each camera one input 24v pulse comes from PLC and I dedicated ISO 8 for it and three outputs TTL1, for camera triggering TTL2 for light triggering and TTL3 for decision making. When I`ll use the 5 cameras I`ll need 5 inputs like ISO8 and 15 outputs from TTL...which is not available with the terminal block accessory which the vision builder software i use configured only ISO 5 and ISO 8 and TTL1, TTL2, TTL3 and TTL4 for pulse generating which not enough to my whole application...how i can get such number of inputs and outputs

Similar Messages

Multiple Cameras with one Instance of FME

Hello,
I am using FME 3.0 for upstreaming to Justin.tv and I am very satisfied, and it works perfectly.
Now I'd like to add effects, like Captions to my Stream and switch between different cameras. I have tried ManyCam which provides me a virtual webcam which I can easily add as Source to FME, but if I switch sources in ManyCam it needs several seconds to start the inactive camera and shows a black screen until the chosen camera is active.
Additionally I'd like to use effects when switching from one camera to another like fading in, or gemoetrical effects, like door opening etc.
The main problem is that I cannot see the live pictrure of an inactive camera in ManyCam,
What I am asking you for is to recommend me software which provides multiple camera feeds to combine/switch live to a virtual webcam.
I know that wirecast supports all this, inclusive the upstream to my server, however I'd like to stick to FME and I cannot afford wirecast. My budget would be less than US$200.
Anything you can recommend?
Thank You
Wolfgang

Installation guide:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000718044&_OBJECT=011000358700000291922009E
page 37:
4.1.7 SAP Solution Manager Client Strategy
SAP delivers a client with a standard configuration for SAP Solution Manager as part of the installation
process. Client 000 is the initial configuration client, and client 001 is provided for productive use.
Additional clients can be created if desired
So I don't see an issue...but i would not recommend it...

Bluetooth connection to multiple devices with the same device name

I just got a new iPhone 4 and am having trouble connecting it to my car's bluetooth. We have two GM vehicles which both have bluetooth. I can connect to one vehicle with no problems, but when I try to connect to the other, the phone tries to connect to the first car since both have the device name of "General Motors". With my old phone, I could change the name of the connection in the phone so that each car had a different name. How do I do this on my iPhone?
Thanks for the help?

No. It's a limitation of the BlueTooth protocol.

Multiple images with same filename-how does iphoto deal?

I recently lost a several pictures from iphoto on my imac running snow leopard. I have tried multiple things with the guidance of a senior advisor from apple, but the pictures are not retrievable. I have multiple backups for many, but I lost about 20 images. Naturally, I am a bit paranoid now about the stability of the remaining photos in my 66gb library, so have made multiple backups of the entire library and plan to migrate to aperture 3 with a vault.
It just struck me though, that because we use multiple cameras with the same canon file naming scheme, I have several instances where I have multiple photos with the same filename. Is this potentially a problem, or because the EXIF info is different for each one, am I okay? If this is a problem, do any of you have any remedies? I plan on adjusting the naming scheme on our cameras for the future.
Thanks in advance!

To add to Terence's reply: the only time you might run into a problem is when you might try exporting photos with the same file name to the same folder on the HD. If that were they case you could batch rename the photo's titles with Photos->Batch Change->Titles to Text with the option to add a sequential number at the end of the file name, i.e. Text - 001.jpg, etc.
Another alternative would be to upload each new shoot to a folder on the desktop and rename them with a renaming app likeName Mangler or Renamer4Mac . I rename them with the date taken and a brief description: 2009-05-10-MomsDayBalboaPark-001.JPG. You also could add an identifier to the description to tell which camera it came from.
This method will avoid any name conflict down the line and make it easy to identify photos as to their general content when used outside of iPhoto. I've found that a little extra effort up front has saved me a lot of problems on down the line.

Multiple images with same filename-how does aperture deal?

I recently lost a several pictures from iphoto on my imac running snow leopard. I have tried multiple things with the guidance of a senior advisor from apple, but the pictures are not retrievable. I have multiple backups for many, but I lost about 20 images. Naturally, I am a bit paranoid now about the stability of the remaining photos in my 66gb library, so have made multiple backups of the entire library and plan to migrate to aperture 3 with a vault.
It just struck me though, that because we use multiple cameras with the same canon file naming scheme, I have several instances where I have multiple photos with the same filename. Is this potentially a problem, or because the EXIF info is different for each one, am I okay? If this is a problem, do any of you have any remedies? I plan on adjusting the naming scheme on our cameras for the future.
Thanks in advance!

The same filename isn't an issue, and no, it won't consider them duplicates, unless you try importing them into the same project.

Problems acquiring and saving multiple camera images using a switch with GigE cameras

Hi Folks,
We are having an issue with connecting 6 GigE cameras via an Ethernet switch. We can acquire and store individual cameras but once we increase the number of cameras we end up with jumpy avi files.
Each camera has been physically labelled and attached to the switch, so camera 1 is attached to port 1, which then corresponds to Cam1 in MAX. When recording multiple files what appears to happen is that the avi file from cam1 actually has images from multiple cameras, as if cam1 is being renamed/allocated on each frmae and each time a different camera is allocated. How can we fix this?
We are new to this so any help or advice would be much appreciated.
Thanks in advance,
Cathy
Attachments:
Camerad.png ‏60 KB
Camera.vi ‏91 KB

I think your problem is caused by using the same image name on each instance of Imaq create. "Grab and Save to AVI Acq" being the string you are using. I am pretty sure If you make each image name unique you wont get image referance problems.
Senior Software Engineer
www.Adansor.com

TS3367 If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Multiple queries with 1 connection

Can I execute multiple queries with one connection?
//Example -
<%
String firstconn;
Class.forName("org.gjt.mm.mysql.Driver");
// create connection string
firstconn = "jdbc:mysql://localhost/profile?user=mark&password=mstringham";
// pass database parameters to JDBC driver
Connection aConn = DriverManager.getConnection(firstconn);
// query statement
Statement firstSQLStatement = aConn.createStatement();
String firstquery = "UPDATE auth_users SET last_log='" + rightnow + "'WHERE name='" + username + "' ";
// get result code
int firstSQLStatus = firstSQLStatement.executeUpdate(firstquery);
// close connection
firstSQLStatement.close();
%>
Now, instead of building a new connection for each query, can I use the same connection info for another query?
if so - how do you do this?
thanks for any help.
Mark

Create multiple statement objects from your connection. It's a good idea to close these in a finally block after you're done with them
Connection conn = null;
Statement stmt1 = null;
Statement stmt2 = null;
try {
    conn = DriverManager.getConnection();
    stmt1 = conn.createStatement();
    // some sql here
    stmt2 = conn.createStatement();
    // some more sql here
} finally {
    if ( stmt1 != null ) stmt1.close();
    if ( stmt2 != null ) stmt2.close();

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Macbook does not recognize iphone 5s when connected using usb cable that came with charger

I have a mac book pro Retina, 15-inch, Late 2013 and iPhone 5s. When I connect iphone to the macbook using the usb cable that came with iphone charger, macbook pro is not recognizing the iphone 5s.
Does any one have any solution for the problem

iOS: Device not recognized in iTunes for Mac OS X
BTW, this is the Mac Pro desktop forum

HT4235 my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection? i just want it to connect to my itunes again!!!

my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!

Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message. The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod. Please advise.

I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message. The cable works with the dealer's iPod which is a newer model. The cable came with the car when I purchased it. Please advise. Thanks.

Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server.take it bac

When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?

Where is everyone???? Does anyone have an answer???
Allik1

I use an iMac 10.6.8 with iPhoto '09 to download digital images from Canon DSLRs. Until the last two weeks there has been no trouble whatever importing images by a USB connection from either camera to the Mac. Now the process will not kick in. Any ideas?

I use an Mac OSX 10.6.8 with iPhoto 09 to download digital images from two Canon DSLRs. Until the last week, there has been no problem whatever in launching the import procedure once the USB connection has been connected and the camera switched on. Now the process will not kick in at all for either camera. I can't find a solution through iPhoto help or from other sources.
Any ideas to fix? (I admit I have not tested the USB cable at this time).

What does "kick in" mean?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

Using Video CAMERA with Connect pro

We reciently purchased this product and were told that it
would work with video cameras. We have a Panasonic that we are
using with vista. this camera works with Premiere Pro, and there is
nothing wrong with it. I know that Connect is not software based it
is an Internet Application. How ever i know that the OS (vista)
"sees" the camera because it works with other programs. Sorry i am
connecting with IEEE not USB
Has anyone out there in the world has success with getting a
video camera using IEEE connection to work fully. Audio and Video
coming through the camera?
Is anyon aware of drivers for either the camera or the IEEE?
And if the Connect product does not support this... WTF?
thanks

Connect does work with IEEE1394 Firewire Cams, just not with
all Firewire Cams. (USB cams also are not all working).
I would suggest to first try out the cam from different
machines with different OSs (Vista might well be the sole issue
here), also try if you can get an ordinary USB cam to work.
If all fails, you can workaround that using a virtual camera
driver, piping the firewire cam into the virtual cam and in Connect
you can load the virtual cam with the image of the Firewire cam.
Not a nice way round, but it would work.
If you google for "Adobe Connect camera compatibility matrix"
you get a "slightly" outdated list of supported cameras.

Physical connection of multiple cameras with EVS

Similar Messages

Maybe you are looking for