Physical control in big projects

Dear Gurus,
I am in a project of implantation SAP ECC in a company of the mining segment.
In this company has Big Projects of CAPEX, today is used the Software Primavera.
The premise is to try to substitute "Primavera" with the component PS, the projects can have around 50.000 item between WBS´s, Activities...
We will have problems in the operation of the ECC and performance...
Somebody already lived this problem?
Regards
Elza
Edited by: Elza A.Silva Bispo on Jul 30, 2010 2:14 PM

Hi,
In this regard, it advised you refer SAP Notes no.206264 on limit in size of projects.
As per SAP, it is recommended that you may try to break your huge project into small projects, if possible, keeping prescribed limits of max. of 10,000 WBS Elements and 10,000 Activities (incl. Act.elements).
With huge project sizes, performance may be affected not only in PS area but also may lead to the performance issues for other areas which have direct link with the Project elements.
Regards,
Vasu
Edited by: SAP_PS_2010 on Aug 1, 2010 5:05 AM
Edited by: SAP_PS_2010 on Aug 1, 2010 5:08 AM

Similar Messages

How can I deploy only one package out of a big project?

Does any one know how can I only deploy one package out of a big project?
We have a project which includes about 12 differenct packages. Is there a way in Jdeveloper for me to create a deploy profile to only deploy one package to a *.jar file?
Do I have to re-create a new project ( that's what I am doing currently) simply for deployment purpose?
By the way, click and pick class from more than 100 classes is too much of work. In addition, you don't really know exactly which class you are picking if two classes (in different packages) have the same name.
Thanks a lot.

Rename your LCA file extention into .ZIP
Open the ZIP file in any of the compressing utility (e.g. WinZip, WinRar etc.)
Extract the desired process and deploy it manually to your server.
Nith

Several small projects under one big project

Dear Gurus,
Can several small projects be created under a big project?
Similar like what we do WBS under the WBS or activities for that matter?

Hi,
Yes, You can. Please go through this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/40/437f8c2dc111d2a62400104b59c1ec/frameset.htm
Hope this will help you.
Regards,

Version Control - Web(JSF) project

Hello fellows,
Which version control for Web project you are using? I have been using CVS for common java (and nojava) projects but is there any another version control tool for Web projects. Any suggestion how web projects should be stored in repository?, how web project should be maintained ?.
Any help and suggestion will be helpful.
Thanks in advance.

SVN is better then CVS

Handling a big project - advice needed

Hi
I am using Premiere Pro CS4 to edit 1920*1080 AVCHD footage (3 hours in total) shot with a Canon HF10 camera. In that matter I have a three questions:
1) Since I don't have a Blu-Ray burner in my PC yet, I am chopping my movie up into several parts each with a length of approximately 30 minutes, so I can burn some DVD's with the movie. My question is then: How do I do this the easiest way? Do I make 6 different projects and edit the movie as if it was 6 independent movies, or is there any better way of doing this?
2) And how do I merge these 6 parts in one, which I will need when I get a Blu-Ray burner?
3) Would you think it is a bad idea to make such a huge project? I have tried several other programs to edit AVCHD with no luck - the programs always crashed at some point, so I am a bit nervous if a 3 hour project would be too huge to be handled properly even though Premiere Pro CS4 looks to be working good. So far I have been able to transcode 30 minutes footage to a DVD with success using Encore (haven't tried more yet). Then I burnt the ISO to a DVD with some freeware program and it looked amazing when I played it with my BD player.
In case you want info on my hardware I give it to you here:
Intel Core2Quad Q9450 2.6Ghz, 4 GB Memory, 1000GB Samsung F1 HD, GF8800GTS 512MB, Windows Vista Ultimate 32Bit
Please tell me if I am unclear about something or need to give you more information.
Thanks in advance :)

That AVCHD footage must be ***** to edit.
My P2 dvcprohd files are a gig a minute yet I get realtime playback with video's on 2 channels fullscreen uncompressed using a computer with just slightly higher - but almost the same - specs as yours. Using just a single SATA 640gb WD and my files are 4 times the size of your AVCHD files.
Hell now I can even playback the footage in After Effects realtime fullframe with now FX (something that comes in handy because I can use AE as my NLE if there isn't to much sound involved)
With big projects you need to split it down to 10-17 minutes parts. Once they get longer than that Premiere becomes sluggish. It's no problem putting all the 'projects' in to a feature length timeline just don't expect to do much editing when it's put together because it'll be real sluggish.
Render to an uncompressed still sequence because you can always restart where the render stopped if it crashes (and it's more likely to the bigger the project).
I'm finishing a feature that way and it's worked great all on CS4 (not that I'm happy with Adobe about Premiere CS4 at all). But I had around 20 hours of rough footage and with duplicates it's 4 terabytes or so.

I am working on big project and in accidentally flatten the file and i saved it as PSD in then I exited Photoshop. the next time when i open the file it is merged on one page. please help!

I am working on big project and in accidentally flatten the file and i saved it as PSD in then I exited Photoshop. the next time when i open the file it is merged on one page. please help!

Flattening and merging are very similar. The main difference is merging keeps the transparent areas, whereas flattening removes all transparent areas by giving it a white background. A good example of flattening is a jpg image.
Since you have closed the file by closing photoshop, that means that the history is now gone, no way of undoing.
So that leaves you with two choices.
You can either recreate the whole document.
Or you can make selections of areas you are keeping and moving them one at a time to new layers. Keep each object on a separate layer. Then redo the area behind those objects.

Budgetary Control and Oracle Projects

Budgetary control for Oracle Projects was mooted as future functionality in 11i. Is this now a reality, and in which release of 11i?
Thanks

Budgetary Control has been added to Projects as part of MiniPack H. The documentation can be found on MetaLink. However, the docuementation does not provide a step by step set guide so I'm having trouble testing this new feature. If you find anyone who has more information regarding budgetary controls and funds check, please let me know.

I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

Also, if you can't get them to work, what is the error message you are getting?
Baron Samedi

Big project done by oracle ADF

hi everybody,
did any one know some big project done by oracle ADF ??
is there any demo online ??? it will help me a lot to convince my manager to work with oracle ADF ;
thanks.

demo application:
http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html
run demo:
http://www.oracle.com/technetwork/developer-tools/adf/documentation/adf-faces-rc-demo-083799.html
sample adf demo:
http://jdevadf.oracle.com/adf-richclient-demo/faces/index.jspx;jsessionid=1Qt3TbPQ1kJpntmbjDznCvj32mWqkmtyQNkCd0yq5HN3YPf7v1Pk!-2111346381?_afrLoop=2626702636812537&_afrWindowMode=0&Adf-Window-Id=w0
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/tree.jspx?Adf-Window-Id=w15&_afrLoop=725443835824416&_afrWindowMode=2
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/treeTable.jspx?Adf-Window-Id=w16&_afrLoop=725446135224429&_afrWindowMode=0
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/skinningKeys/brandingBar.jspx?_afrRedirect=724564639942429&_afrLoop=724611806862216&_afrWindowMode=0&Adf-Window-Id=w6
http://sd4itapps.com/sddemo
skining demos:
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/skinningKeys/index.jspx?_afrLoop=45586601071161272&_afrWindowMode=0&_afrWindowId=null
Form Visual Design Demo
http://jdevadf.oracle.com/adf-richclient-demo/faces/visualDesigns/formLayout.jspx
demo summit adf app videos
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/SummitADF/SummitADF.html

IMovie only show background music after connecting to my external iMovie Mediathek, no video!!! desperat, i potentially lost a big project...

I work with an external iMovie-Mediathek so my big project don't mess up my macbook. I was working on a big project (45 min.) after the program crashed. Now, when I try to connect again to the external Mediathek, it will only show the background music I used, no video material at all... !!!!!!!!!!!!!!!! But in the "events"-section, it looks normal with the preview just like always during the last couple of days... It even shows the size of the file with 146GB (which is correct), but still only the music is displayed (about 7 tracks).
I need urgent help. Same thing happened to the security-backup I make regularly...

Here's a picture of the iM window. 3 Projects available but only 2 desplayed? HOW I GET MY 3rd PROJECT BACK????

Breaking up a big project

Hi
I read in a posting some time back that a neat way of 'breaking up' a big project would be to export sections as avi movie clips and then re-assemble the movie clips to burn a DVD. Would there be a degredation of the quality or loss of video resolution in going about a project in this way? Thanks, John Mathias

There might be a slight (negligable) degradation in clips which have had content changed (eg subtitle added, brightness or contrast changed, etc.), but if you start with DV AVI and export to DV AVI with the recompress flag unchecked (checked by default), then unaltered frames should pass through exactly the same.

Getting a very big project into one DVD

Hi,
I got a really big project which according to encore needs 8.5 GB.
I want to put it on a 4.5 GB DVD.
I tried transcoding it different and do "fit" but nothing helps.
I don't really mind the quality, I just want it to get into one DVD.
What do I do?
Thanks.

>2nd is they use multi-pass encoders that cost WAY more than what you have invested in your entire computer hardware and software... there was a recent message somewhere (I'm not going to look) that mentioned a NINE pass encoder
Cinemacraft CCE-SP. Their basic version is cheap, at $79. The next one is around $2,000 and has up to 99-pass encoding available as well as a feature that will allow you to set timecodes and encode the sections between each timecode reference with different settings too. It uses what they call "Adaptive Quantize Matrix" encoding, which creates a reference file, and begins to encode and after the third pass, it will continually refine the process on a sub-pixel level until it gets the finest possible quality. It's awesome, and takes a LOT of learning.
See http://www.cinemacraft.com/eng/sp2.html
This version is small potatoes indeed to what they call their "serious" encoder, which is unpriced unless you contact them directly.
http://www.omni-cinemacraft.com/products_cinemacraftxtream.shtml
If you have to ask, you can't afford it.
Sonic Solutions also do an HD/SD encoder called CineVision, which is a wallet-busting $50,000 a go.
MPEG encoding is an art - even more so than cutting & editing film in the first place, and the big players employ encodists who just do this - all day, every day. You are never going to get the same quality from a sub-$500 2-pass encoder.

Rendering big projects

In FCP,is it possible render big project using more then one mac? (share render)
thx

Rendering the Timeline - no.
Transcoding to other formats (often mistakenly called rendering) using Compressor and Qmaster -yes.
Read the "Distributed Processing Setup" manual that accompanies Qmaster. Depending on which version of FCS you have, you might have a printed version. In any case there is an identical pdf in the application's Help menu bar item.

Organising a big project with sub-projects

So ,I'm laying out my project now, very large. Easily over 1000 topics, about 1000 images, some embedded, some not, variables all over the place etc., and this is for our generic help file.
I'm thinking of how to proceed with the other versions of this that will come in the future, i.e client specific help files with some sections removed that aren't relevent, images changed etc.
Just wondering what people think.
a) create a new project for each client iteration of the help file and share topics, variables etc using the resource manager? (this is what it is used for correct?)
b) leave everything in one large project, remove topic in each TOC before publishing and maintain everything in one place.
Both are good ideas, maybe. if I have different projects, then I manage things individually and keep prject sizes low and organised. If I keep each topic in one place I don't have issues with importanting resources, keeping them all shared properly and potentially losing things and everything is centralized, though things could become very big and maybe RH will start to slow down......
I also worry about the Resource manager and where its storing things that I import into it, and if they are lost/corrupted then other links etc might die also....
cheers.
Nick

"ah ok then, so to achieve output where I want some topics in and some not I need to use the conditional tags, and basically I have to apply conditional tags to every topic..."
Not exactly.
To control "some topics in and some not," different TOCs and different layouts can each be used, in addition to conditional tags.
And no, you do not "have to apply conditional tags to every topic." As Peter said, topics with no conditional build tag will be included in every output. You might find variables to be more useful if you're looking at branding or versioning issues (the rest of the topic is identical for every output, and would not need conditionalizing).
Your best bet is to investigate what the output demands are currently, and what they might morph into in the near term and long term, such as whether context-sensitive help will be needed, whether print versions will be supplied, etc. You might find that the largest percentage of topics will appear in every output, with each of them containing a smattering of variables, snippets, and conditionalized segments of content (different screenshots, tables, etc.). You might even structure a merged help project so that certain outputs would eliminate entire project folders.
Bottom line: one solution is usually never the way to go...be good to yourself, and use all the features that RH offers. But again, do your homework now, to save yourself untold grief later on.
Good luck,
Leon

BC4J - Big Project - Business Logic

What is the suggested best practice on where to locate business logic in a big application?
It would appear that entity objects are good for table/domain level validation.
View objects are good to ensure that the data between multiple tables is copesthetic.
But where would one place business process logic that could potentially span multiple views and even multiple application modules?
Also what is the difference between retrieving an application module using the ApplicationModuleHome.create function and from the applicationpool?
Thanks,
Marty
null

re: "duplicate"
You betchya. This is mimicing a SmallTalk implementation I worked with years back.
In some cases, the checks are not duplicated because they share "objects" instantiated for those entities. And in the case of 3 frames all with the same field.. only one check fires ( the active frame where they entered the data ) and all the others don't fire.. they just clean up when the user corrects the data.
In some cases putting validation in the EO appears to just add work at both ends, and adds another layer of confusion for programmers. ( I.E. A programmer is looking at the code.. it is NOT apparent without complete knowledge of the EO code what is and is not being checked. Is that maintainable? maybe, maybe not )
Here's an example of an edit check... confirming that a part number is valid for a custom Find Panel.. and while we're at it, let's turn * to % for a LIKE statement so all our Access users don't get confused:
String oldPart = ((ImmediateAccess)partNumber_tf.getDataItem()).getValueAsString().toUpperCase();
String wildPart = new String();
if (oldPart.indexOf("*") > 0)
{ wildPart = oldPart.substring(0,oldPart.indexOf("*"))+"%"+
oldPart.substring(oldPart.indexOf("*")+1);
oldPart = wildPart;
try { ((ImmediateAccess)partNumber_tf.getDataItem()).setValue(oldPart); }
catch ( Exception e0 ) { System.out.println(e0.toString()); }
if (oldPart.indexOf("%") < 0)
if (!isValidPartNumber(oldPart) )
try { ((ImmediateAccess)partNumber_tf.getDataItem()).setValue(""); }
catch (Exception e0) { System.out.println(e0.toString()); }
boolean isValidPartNumber( String partNumber )
boolean isValid = true;
if (!partNumber.equals("") )
try
Statement call= OpenDBConnections.myJdbcConnection.createStatement();
ResultSet rset=call.executeQuery("SELECT getPartDescription('"+
partNumber+
"') AS PART_DESC FROM DUAL");
rset.next();
if (rset.getString("PART_DESC").startsWith("ERROR") )
statusLine_tf.setText("USER ERROR: Invalid Part Number!");
Toolkit.getDefaultToolkit().beep();
isValid = false;
else
{ status_tf.setText(""); }
rset.close();
call.close();
catch (SQLException esql)
{System.out.println(esql.toString());}
return isValid;
Notes:
1. I do a JDBC call cuz I don't want a lock on my target records. It's a bloody read only request. ( Or is there a way to set that up..as far as I can tell UPDATABLE seems to affect the UI when defined in the View Object.. it has nothing to do with locking? The EO may be updatable by the application... by read only for this particular purpose... )
2. If I understand you right, you are saying to do the IsValidPartNumber code in the validateEntity() method. I want it NOW.. not at commit time.. or is validateEntity "run" on any change to the EO? Or should it be put on the impl setr so that the try catch around the setValue() of the DACF element will catch it? ( I like that )
3. The status line and beeping is managed by the try catch around the dacf setValue(), as well as the clearning of the appropriate DACF control and refocus (if needed ).
4. And that the validation should REALLY be applied to a DOMAIN of "PartNumberDomain".. since it really applies to many EOs with attributes that are of domain "PartNumberDomain".
That last item is VERY interesting to me. I used such stuff in Rdb in the database. Catch is that domain and their power and implementation is scantily described in training and in the online Help.
I'm guessing that when I do a DACF entry that the setr in the EO can be used to validate.. and that the DOMAIN edit gets automatically executed as well.. and that it shows up as a JBOException to the try/catch at the application source level for the programmer to deal with, right?
Note that when Dec/Rdb started on this sorta course 10 years ago, it was clear to everyone that it was a house of ravioli code.. and that without a POWERFUL object repository it was very, very difficult for la rge projects to be built so that programmers would have clear visibility to all the conditions/issues.
Want to bet that you can count on one hand (or less) the number of customers outside of Oracle who have implemented domain validation code and applied it to Entity Object attributes?
Note that in all these cases, I still need to implement the same checks in my triggers to protect the database against ALL comers. So everything gets checked twice.
re: BC4J, wrappers, and java stored procedures. All interesting ideas. I booted that option out during this implementation because the goal was to implement the application... I estimated we'd extend the project another 2-3 months by taking the approach you imply, due to learning curve, conceptual errors on our part during implementation, bugs in the Oracle code awaiting fixing, ad nauseam. That rough estimate has been born out by the fact that JDEV issues of implementation has caused my project to slide over 2 months. Simple, easy things I had alotted a short effort for based on experience with MS Access, Delphi, Forms and other tools turned out to wildly off base. ( Example: the imageControl that simply doesn't work, but is documented as being so easy and quick to put in ).
Thanks again. BTW. If you don't know, I'll be at Oracle HQ on Friday the 16th. Hope to see you again, if just to say hi.
null

Physical control in big projects

Similar Messages

Maybe you are looking for