Physical inventory check MI01

In MI01, eventhough if i select Posting Block, and freeze Book inverntory, after creating the Physical inventory Document. i tried posting some 100 qty for the same material and storage loc .
I have also made (Allow Freezing of Book Inventory Balance in Storage Location) and i have selected the Storage location
Eventhough system is allowing me to post stocks.
Till i post the difference sys should not allow to post the stock rite??

thanks a lot for ur reply
while posting the difference i am getting the error
Difference amount is too high
Message no. M7777
I have configured the Physical Inventory difference tolerance group
Difference amount per phys. inv. doc = 1000
and user name i have given my username and i have given the tolerance group
when i try to post the difference
Difference amount is too high i am getting this error

Similar Messages

Physical inventory/stock taking, Asset tracking

Hello, I am trying to understand how asset labelling, tracking and physical inventory (stock taking) can be done using handheld devices directly on SAP. Pls let me know any leads/information. Thanks, SD

Hi
1.Post physical inventory document-MI01
2.Enter inventory count-MI04
3.Post inventory difference-MI07

Physical Inventory Posting Block

Hi ,
I have Created Physical Inventory Document (MI01) with Posting Block , But i will try to do REM back flash T code MFBF, it will for all the transaction good receipt and goods issue all the transaction , kindly tell me how to control this
Regards,
Ranganath

do I understand that correct your MFBF reduces the inventory that is blocked for physical inventory?
Can it be that you already entered the count? because the count entry in MI04 removes the posting block. Often people think the posting block is removed with posting the difference, but as said, this happens already with entering the count.

Physical inventory of configurable material

Hi ,
   Can any one suggest me the process of performing physical inventory for configurable material.
Thanks ,
Deepa

Physical Inventory (MM-IM)
Technical name: SAP_MM_IM_INVENTORY_CONTROL
Tasks
In Physical Inventory, the user has the task of creating and processing physical inventory documents. After the physical inventory count is complete and a recount has been carried out if required, he or she posts the inventory differences and can print out a list of these.
Activities in Materials Management
Activity,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Transaction Code
Create Physical Inventory Document     MI01
Change Physical Inventory Document     MI02
Display Physical Inventory Document     MI03
Print Physical Inventory Document     MI21
Process List of Differences                     MI07
Create List of Differences with Document     MI08
Create List of Differences Without Document MI10
Print List of Differences                      MI20
Recount Physical Inventory Document     MI11
Reporting in Physical Inventory (MM-IM)
Technical name: SAP_MM_IM_INVENTORY_REPORTING
Tasks
The user has the task of monitoring all the data relevant to physical inventory in the Inventory Management component.
Activities in Materials Management
Activity,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Transaction Code
Display Physical Inventory Documents for Material     MI22
Display Physical Inventory Data for Material     MI23
Physical Inventory Overview     MIDO
Display Changes     MI12
Physical Inventory List     MI24
Read Physical Inventory Document Archive     MIAL
Carrying Out a Physical Inventory (MM-IM)
Technical name: SAP_MM_IM_INVENTORY_EXECUTION
Tasks
When carrying out a physical inventory, the user has the task of entering the counted stocks in the system and changing and displaying physical inventory documents if necessary.
Activities in Materials Management
Activity     Transaction Code
Enter Physical Inventory Count with Document     MI04
Enter Physical Inventory Count without Document     MI09
Change Physical Inventory Count     MI05
Display Physical Inventory Count     MI06
Inventory Sampling (MM-IM)
Technical name: SAP_MM_IM_INVENTORY_SAMPLINGTasks
The user has the task of creating, changing, and displaying data for the inventory sampling procedure in the R/3 System or other systems. He or she carries out the individual steps in the inventory sampling procedure: assigning stock management levels, forming the stock population, forming a stratification, forming a random selection, update, and extrapolation.
Activities in Materials Management
Activity     Transaction Code
Create Inventory Sampling in the R/3 System     MIS1
Create Inventory Sampling - Other     MIS5
Change Inventory Sampling     MIS2
Display Inventory Sampling     MIS3
http://help.sap.com/saphelp_46c/helpdata/en/b5/2f2686d6f511d3b7f30000e82de955/frameset.htm
Edited by: SYED SALEEM on Mar 20, 2008 10:50 PM
Edited by: SYED SALEEM on Mar 20, 2008 11:19 PM

Default check on the 'Posting block' check box in the Physical Inventory

I am looking for a default check on the 'Posting block' check box in the Physical Inventory document for T-code MI01 or MI31. Can anyone help in this?

Thanks for your reply. Can you send me the detail process how to do it through Transaction Variant.
Regards,
Tt

*bold* Enhancement in Mi01 tcode for Physical Inventory *bold*

hi,
My issue is i need to maintain the physical inventory reference field in the header of tcode Mi01 by checking it against a text the current status of my program is i am able to check for the text however if the user doesnt click the header button and saves the tcode after entering the material its allowing him to do now i need to make sure that i put in a condition that the header is maintained and in that i need to check for the text before saving .
Thanks in advance

I hav resolved it by myself

Material blocked due to a physical inventory

Hello,
I have an issue.
I have done a stock take via MI01, MI21, MI04 and finally MI20!
When I afterwards create a delivery with one of that part that was counted it gives me an error message saying:
M7100 - Material xxx blocked due to a physical inventory
When I look into the inventory document it says: Counted, adjusted.
While debugging I found out that the process somewhere checks MARD-SPERR which is X for that part and therefore outputs messsage M7100! But X only indicates that posting block was set while physical inventory was done!
Does someone have an idea? Is there maybe a report to verify and correct inventory status?
Hope someone can help, cause I've counted a hundreds of parts which are now blocked.
Thanks for your reply.
Wolfgang

Hello Wolfgang,
If you enter the differences for your physical inventory documents against those materials, then the posting block check shall automatically go off and you can do the material movements.
First, you need to check whether you posted the differences for the respective physical inventory document.
If not you need to post the difference first as it may lead to data inconsistencies.
To remove the posting block go to MI02, enter the physical inventory document number and year, now go to Header and untick the posting block check box.
Posting block indicator
The indicator remains in the physical document header even if the stock is unblocked through the posting of inventory differences. It then only indicates that a posting block was set for the documents.
The blocking indicator can be set in one of two ways:
Directly upon entry of the physical inventory document (if the count is to take place immediately)
Shortly before the count (if the count is to take place later)
You can set the indicator by choosing Physical inventory document -> Change in the header data of the physical inventory document or via batch input.
Now you can create delivery for the materials.
Br,
Tushar
Edited by: Tushar Patankar on Jan 24, 2011 5:30 PM

MB1C and Physical Inventory

Hi experts,
I have try to Post one material using MB1c using 561 movenent type,while saving it gives a message"Delivery 180000014 created". I dont know how this message is coming and the stock also not get updated.
Then by using transaction code MI01 for the material it saying error message"Phys. inventory document cannot be created
Message no. M7450
Diagnosis
A physical inventory document has to be created, but the storage location is subject to handling unit management.
Physical inventory in Inventory Management does not support handling units.
please advice
regards
s

Hi
For MB1C
Try to understand whether a materia document has been created or not.
For this aim check MB51 with relevant parameters (that you have done MB1C such as material number,mov. type:561, posting date etc)
If not then this shows that it hasnt been done i mean no update.
Try MB1c again
For the other issue
You can use all the functions of Inventory Management, with the exception of the following:
u2022 Physical inventory in Inventory Management does not support Handling Unit Management.
check:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOHU/LOHU.pdf
Hope will help
Best Regards

Physical inventory document - for all A parts

Hi,
We are in the process of preparing our system for physical inventory count for all A parts (Cycle count indicator is A).
1. We ran MI24 to get all open physical inventory documents.(they are around 100).
2.Then we ran MI31 (didn't create batch input) for all A parts and the following are checked - 1. Material marked for deletion 2. only materials w/o zero stock 3. Unrestrcited use 4. Blocked 4. Include inventoried materials 5. Included inventoried batches. The variant for MI31 includes all A parts in the material selection and the required plant and SL are input. The output said, phy inventory documents could be created for 656 materials.
3. I wrote a query with MARC and MARD to get all A parts with unrestricted quantity > 0 for the above specified plant and SL. The list produced 882.
The above two counts are not matching.
I ran MI31 for some of the materials which are in the list materials as per point 3 but not in the above 2. But MI31 said, no physical inventory document can be created.
We want to make sure both the both numbers are equal (step 1 + 2 = step 3), to make sure all A parts will be counted. Can anyone explain why they are not matching? or Am I missing something?
OR any other ways to make sure all A parts will be counted. Thanks,
Regards,
Sundar.

Please refer my comment. It may be useful for you.
There are two ways if you want to carry out Physical Inventory count
1)Manual -
First check if there are no open PI document for a material using MI31.
Then carry out three transactions one after another MI01, MI04, MI07
2) Automatic
Maintain CC physical inv. indicator in material master i.e A, B, C
Before that ensure that you have maintained SPRO setting for A, B and C.
Ok Now check the planned count date in MARC table. Run a Z program to change the last count date
Now run MICN and schedule a job to create PI documents

Interfaces in Physical Inventory

Hi experts
Can i get info on interfaces in physical inventory process.
warm regards
marias

Hi
See all the MI** transactions for Physical inventory related transactions like
MI01/02/03 PI doc cretae/change/display
check the transactions
MI04,05,06,07,08,09,10,11,12,20,22,23,24 and
MMBE,MB51 etc
Reward points for useful Answers
Regards
Anji

Authorization Control for Physical Inventory Transactions

Hello,
Can we control the authorization for Physical Inventory Transactions especially MI01, MI02, Mi04, MI07, MI08, MI31 etc. at Storage Location level instead of Plant Level.
If it's not possible at Sloc level does anyone knows the user exit/code we can use enable the authorization check at Storage Location level.
Regards,

hi,
yes u can do it.
check
M_MSEG_LGO Goods Movements: Storage Location
mvt type 701/702

MM-Physical Inventory

Hi all,
Is it possible to do backdated Physical Inventory for Customer Consignment??
I have tried it however sysyem always compares stock with the current stock and posts the difference ,,,not with reference to the back date i am referring to,,
Experts any suggestion on it??
Refards
Shrinivas

Hi
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the system, difference analysis can be carried out using transaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.
Serial Numbers in Physical Inventory
If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
- Serial number profile must be maintained in the material master.
- the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
- The stock check indicator in the serial number profile should be configured.
- Maintain basic settings for the serial numbers in customization for Serial Number Profile.
- Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock
Rgds,
Rajesh

Implementation of physical inventory

hi,
tell me the detail steps while implementing physical inventory newly for a company ( with t codes)

Dear,
Please efer the link /people/community.user/blog/2007/05/04/physical-inventory-in-material-management
First you can use the trn. MI01 there put all the material save, then use T-Code MI04 there you have to enter the count the if you want put 0, put it and make the tick then save then use MI22 post the difference.
About Physical inventory process you have another way :
1. Use t-code MI31 instead of using MI01 , it will give you a document number of all your stock.
2. If you did not get the document number use t-code MI24 .
3. MI21 to print the document.
4. MI04 to enter the count if you want put 0.
5. MI07 post.
Create PI document using MI01 (MI31 -Using Batch)
Enter Count Using MI04 (Select Zero Stock Indicator)
Post Count results using MI07
Check Results using MI24
Upload initial Stock using MB1C 561
Reward if helpful
Regards
venu gopal
Edited by: venu kk on Apr 29, 2008 12:37 PM

Physical inventory

Dear All,
When I created physical inventory document by using MI31 some batches were not picked in the inventory documant.But other batches are been picked for the same material.
I checked the batch characters in MSC3N it is same for both the batches.
Can any one tell me why system dint pick other batches of the same materail.
Thanks in advance,
With Rgds,
Babu

Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Hi
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)

Problem in the Physical Inventory Count

Hi Experts,
We are facing a problem in the Physical Inventory Count as below
1) Suppose for Material XYZ we have done the MI01 on the current date i.e 14.11.2008 with the Planned Count date as 08.11.2008 activating the Freeze Book Inventory check box.
2) Now if there is any movement of material XYZ between 08.11.2008 & 14.11.2008, then while doing MI20 it compares the Physical Count Quantity with the actual book quantity as on 14.11.2008 i.e the current date & not with actual book quantity as on 08.11.2008 which is required by us.
Can you kindly help us in rectifying this issue at the earliest???
Regards,
Samir Bhatt

hi,
In such cases, you use the adjust Book inventory indicator...
SPRO --> MM --> Inventiry management and PI --> Physical inventory > Settings for the PI> Activate the ADj book inv indicator for your plant as per your plant and make the choice btween 2 and 3...
By this the system will auto adjust the book inventory and the count for the goods mov posted.....
Note: This feature is allowed if the posting is done one day after or before...
But in your case, the days are more, so you need to use the recount technique...
Regards
Priyanka.P

Physical inventory check MI01

Similar Messages

Maybe you are looking for