Physical inventory document not showing the warehouse stock type in MI24

Hi Friends,
I am facing two issues.
1. In Production system, after executing MI31 for plant 3070, if i see the report in MI24, in Plant 3070, sLoc 0010, for some materials Warehouse stock type is not coming even though the materials are warehouse managed and having warehouse management views are there in material master. for some materials warehouse stock type is coming in the same plant and sloc.
2. In qulaity system, afetr executing MI31 for Plant 3070, no PID is generated for Sloc 0010 even though the sloc is having materials and those are warehouse managed and having warehouse management views are therein material master.
where i need to check for the problem,
Please help me in resolving this issue, this is high priority for me.
Thanks in advance,
Ravi.

>
Ravi Kumar Bittavarapu wrote:
>> 1. In Production system, after executing MI31 for plant 3070, if i see the report in MI24, in Plant 3070, sLoc 0010, for some materials Warehouse stock type is not coming even though the materials are warehouse managed and having warehouse management views are there in material master. for some materials warehouse stock type is coming in the same plant and sloc.
>
> 2. In qulaity system, afetr executing MI31 for Plant 3070, no PID is generated for Sloc 0010 even though the sloc is having materials and those are warehouse managed and having warehouse management views are therein material master.
>
> where i need to check for the problem,
>
> Ravi.
in your training documents (just kidding) .
You wrote that your storage location is warehouse managed. But MI31 is the transaction to craete physical inventory documents for a non-warehouse-managed location.
You have to create your physical inventory with WM transactions like LX16.

Similar Messages

Material Document Not Shows the System

Dear All
In my client is Done the Migo W r t Po but that Materail document not shows the PO History and Mb51, but i check the PO in delivery is Complted in delidery status. plz i need your help.
Thanks And Regards
Sonu

Sorry ya, its not Coming, material document does not Exist. error is comeign.

Imac OSX 10.8.2 imessage will not show the text I type

When using message from my imac, the text i type does not appear in the chat box. But this same text I just typed will show up on my iphone and ipad.
I have looked under preferences and do not see any related settings. Is this meant to be? If not how can i correct this issue.
Thanks

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Transaction code for mass creation of physical Inventory document

what is the transaction code for mass creation of physical Inventory document.

MI31 is the transaction to create hundreds of physical inventory documents for annual inventory at a time.
MICN can create several documents at a time for cycle count.
Just look in the menu of phyiscal inventory into the knot Sessions, there are even more e.g. for counting of own stock a customer and vendor location, for vendor stock at own location etc.

How to populate list of materials in IM level Physical Inventory document?

Hi,
Suppose we have maintained 1000 materials in storage location ABCD. Now when I undertake physical inventory process at IM level, I have to create physical inventory document for this storage location ABCD and I will have to input all these 1000 materials manually for count process in the document.
Is there any other way whereby if I select the storage location, all the materials which are maintained in this location will get automatically populated in the physical inventory document.
Thanks in advance,
Sanjog

Hello,
SAP provides standard transaction MI31 to create Physical inventory documents. In the selection screen, you may enter your storage location to include all materials of that location.
Thanks,
Venu

Not able to enter the count for physical inventory document in WM

Hi All,
I have created a Physical Inventory document using LX16 t-code (WM managed). Since the material and bin stock is zero and When I try to enter the count by ticking zero stock indicator using LI11 t-code, I am not able to save the document and system throws error "Finding empty Quants provided for" and message number is L4058.
Please let me know how to resolve this.
Regards
Krishnamurthy

Yes your understanding is correct but only thing I have not entered qty in the count field rather I set only zero stock indicator.
My requirement is " In Inventory (MMBE) stock of a material shows around "3000" qty. But In WM stock is "zero" and physically also "zero". so in IM also stock should be reduced to "Zero". So I tried of creating PI document in WM and then when I try to enter the count, I faced the menioned problem.
Regards
Krishnamurthy

Physical inventory document was missing in the table

Dear all,
My client have done a physical inventory means they have counted and post the difference also.
but i was trying to see the document not showing in the table or mi20 or any other transaction.
after that lot of documents has been created, only particular phy. inventory document was missing.
Please help me resolve this issue.

how do you know that the count was posted if the document is not in the tables?
A document is deleted physically if the document has no counts posted and you delete it in MI02.
The only other legal option to get a document off the tables is with archiving.
In transaction SARA for object MM_INVBEL click the button for Adminstration to see if there was an archiving done.

Can we create Physical inventory document for SO stock (E stock)?

Hi,
Can we create Physical inventory document, enter count, then post different for SO stock (E stock)?
I try these, after post the different, system does not make any adjustment on my stock quantity.
How can we do these? I wish to zerorize my SO stock quantity. It was a mistake created earlier.
Thanks

Hi,
Thanks for your helps.
I try, after I run batch input, where can I know the Physical Inventory Document created via SM35?
And I try MI01 with indicate E special stock indicator, it allow to put SO number and SO line item.
Can I know what is different by using MI01 and MIE1? When we will using MIE1?
Thank you.

Unable to Activate a Physical Inventory document for a Bin in a Warehouse

Hi All-
I am trying to activate a Physical Inventory document in a warehosue and I am getting message saying "Number of allowed bins exceeded after storage bin XXXXXXXXXX".
Physical Invenoty methoid is Continous.
The Warehouse is HU-managed Storage location and is also Storage Unit Management activated.
Does anyone have a similar issue oe experience working with HU managed storage location physical inventory.
Any thoughts or pointers on how to solve the issue?
- Prashant

Hi,
Check your settings for your WH:
Logistics Execution > WM > Activities > Physical Inventory > Define Differences and Document Limits
BR
Csaba

MB1B: Variant transaction is not showing the message of document creation

Dear MM EXPERTS n GURUS,
When we create any document using T-Code MB1B, on successful posting it gives a message: Message no. M7060, Document 4900556951 has been saved and is stored in the database.
Now, we have created an variant of this Transaction (ZMB1B) and assigned this Z-Transaction to the user. Original Transaction (MB1B), has been blocked for that user, because - user should use only ZMB1B.
Problem is that after saving the document in Z-Transaction, user come out to main screen (SAP EASY ACCESS Screen) with a message You are not authorized to use transaction MB1B Message no. S#077
While document has been saved in database.
Why it is not showing the message - Message no. M7060, Document 4900556951 has been saved and is stored in the database.
Thanks in advance.
DSC

Dear GURUS n EXPERTS,
As I have mentioned in my previous thread - After creation of Variant if I block or not assigned the original T-Code i.e. MB1B, system gives message Message no. S#077 You are not authorized to use T-Code MB1B.
If I don't block the or assigned the Original T-code, there is chance to user will use original T-Code instead of variant.
How can we solve this problem.
Please advice.
With thanks,
DSC

Router 7606 does not show the inventory for the Fan module

I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,

Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull.

Physical inventory document - date of entry in the system

Hi,
Please tell me if it is possible to find date of entry to the system of the physical inventory document.
I couldn't find the creation date in IKPF.
In tables BKPF and MKPF we have CPUDT.
Regards,
Beata Chmura

Dear,
Please check tables:
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
LINK Inventory document header in WM
LINP Inventory document item in WM
LINV Inventory data per quant
Regards,
Syed Hussain.

Physical Inventory - need to reverse the posting

Hello Everybody,
We performed a cylce count on work center in a plant. There were 4 numbers that we had to do a recount on. I was unable to enter the recounts. By mistake I posted the document before the changes were made. I tried to cancel the mat doc but was unsuccessful. I need this posting reversed.
Can anyone pls guide me.....?

Hi
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the system, difference analysis can be carried out using transaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.
Serial Numbers in Physical Inventory
If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
- Serial number profile must be maintained in the material master.
- the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
- The stock check indicator in the serial number profile should be configured.
- Maintain basic settings for the serial numbers in customization for Serial Number Profile.
- Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock

List physical inventory documents by status

Need to generate a list of physical inventory documents in Not Counted or Counted status, but only need it at the document level. (This is non-warehouse managed inventory)
MI20 and MI24 show inventory documents for different statuses, but they all list the output by document line item. There does not seem a way to compress the list to only the document number without the line item detail. I've checked the layouts and summation levels without any luck.
Ideas?

Hi
In MI20 and MI24, you will not be able to get the list at document level because the count in a PI doc is done Item wise. In the same PI Doc, some items may have been counted and some not yet.
However, you can group the list by PI doc from the Selection screen itself and then using the Layout function, view only the PI doc no and Sl no of the item and Count status (Sl no of item is mandatory field and cannot be hidden).
The other option is through SE16 (Tabl name ISEG). You have many options here. But still you will not be able to get the doc per your requirement. Your requirement has to be a Z report.
Hope this clarifies.
Thanks

Error while creating physical inventory document with zero count

Hi,
I am trying to create a physical inventory document for a material that has zero stock and that is not batch managed but I am geting an error as below.
"Item 001: No batches that can be included in phys. inv. exist.(Message no. M7701)"
This error occurs only for one or two materials.
I am able to create the physical inventory document for other materials which is also zero stock and there is no batch managed for the same.
Can anyone pls advice.
Regards,
Ramya

hi
if your material is split valuated, but not batch managed, then the split valuation type is shown in field batch number. And...it is a batch then.
To be able to do a zero count you have to have a batch record whose batch number is the valuation type.
If you never had stock in the storage location you want count, then you have to
1. extend the material to this storage location with MMSC
2. create the batch record with MSC1N for this storage location.

Physical inventory document not showing the warehouse stock type in MI24

Similar Messages

Maybe you are looking for