Physical Inventory documents mass delete and reference in material document
Dear Experts,
I have 3 questions,
1. Is there any option to mass delete physical Inv documents
2. How can i know if the physical inventory documents are posted (MI07) or not yet
3. If i see any material document of mov type 701 or 702, there is no reference of physical Inv Doc # in it. How can i know that this material document is created as a result of which physicl Inv document.
Appreciate your help
SAPXPT
Hi,
"1. Is there any option to mass delete physical Inv documents"
Yes You can delete the Physical Inv Documents with MIAD but for that you need to maintain one variant with it and copy all the Document no. in TEXT file paste in the in Archiving Selection's.
"2. How can i know if the physical inventory documents are posted (MI07) or not yet"
Please check ISEG table and provide the time Period as search menu so that you can see all the Doc's posted on today's date.
"3. If i see any material document of mov type 701 or 702, there is no reference of physical Inv Doc # in it. How can i know that this material document is created as a result of which physical Inv document."
go to MB59 and check the Material documents with respect to Movement type and date. and the difference you will see in MMBE as per the movement used.
Regards,
Ninad Kshirsagar
Similar Messages
-
Mass Delete Offline Reference Files..?
You know when you open a project and it says
"Some of your files have gone offline" ?
How can I mass delete these references?
I have already "forgotten" these, so I don't
get a warning when I open the project.
I just don't want them cluttering up visual space.
I have thought to use Media Manager, but I'm afraid
it'll write over my good files or try and copy everything.
Even if the referencing works out, I'm afraid the red files
will still be there and some of my audio/Motion files
will be cut into unworkable pieces.
Thanks for the help in advance!If I understand you, you have references in your project that point to files that are no longer resident on your system? A lot of media clips with the redline through them? And you don't want to look at them any more?
If so, just delete them from your browser: highlight, hit delete key. -
Goods Issue with reference to Material document
Hello,
I would like to create Goods Issue with reference to material document (Transfer Posting document) , but the following message appears :
"Selected material document does not correspond with action to be executed".
Is it possible to create Goods Issue with reference to Transfer Posting (mov.type 311 - from stor.loc. to stor.loc.) ?
ThanksThanks,
probably I'll have to find another way to solve this business requirement of copying the transfer document data in GI.
We have an auto created transfer postings via interface from another system and the main idea was to use already entered fields in transfer posting document such as material , quantity , text , goods recepient , etc. and not to enter them twice when GI should be created. In our case (it's a case for certain materials) it's always 1:1 relationship, so the idea was to facilitate the job of creating the GI, because GI should contain the same data as in transfer posting document. -
Hi,
we use a few tables to log access to our various e-commerce sites.
Now some of these tables are very large (20-50 millions row) so we decided to remove old data after having consolidated it.
However deleting a large number of rows takes a long time (it took about 18 minutes to remove 2millions).
We're removing all rows with primary key less than x (key is an integer).
Does a method exists to mass delete with better performances (maybe disabling logging or ....) ?
If not, can I send a delete statement that will run on background (i.e. disconnecting the client) possibly at a lower priority ?
Rows are always inserted with primary key greater than x (it's a db sequence) so delete and insert never conflicts.
Thank youHi Andrea,
I know that this might come a bit too late for your scenario, but how about this?
For your logging table you could implement something like a poor-mans-partitioniong yourself.
Instead of one big table, you create a table for each, say quarter yourself.
You also create a synonym to he currently used "write-into-this" partition, so that your logging trigger doesn't have to be changed when the new partition should be used.
On top of that you create a UNION view over all partitions.
With that your requirements for logging everything should be fulfilled and (since you don't have to take care about updates) you can keep the active partition small and get rid of old data very fast (drop table/truncate table).
If you go for the "truncate table" (which is pretty much the same as a "drop table" for MaxDB) then you can also think about having a fixed set of tables (Q1, Q2,... Q7, Q8) that you write to in a round-robin fashion. This would then be a kind of moving-window into your logging history.
The only thing to take care of here is that you'll need to have a small time-slice in which you change the synonym every quarter.
Just my two pence on this...
regards,
Lars -
Document got deleted and i didn't save
While I was writing a document on the new Pages, my computer froze and the document got deleted. Is there any way that I can recover the document?
In the Finder, press shift+command+G. Clear any existing content in the Go to folder content input area.
Triple-click the following content, copy and paste it into the Go to folder input window. Edit the viking part with your short user name.
/Users/viking/Library/Containers/
Once you are in the Containers directory, look for the file named com.apple.iWork.Pages. Right-click on this file and choose Show Package Contents.
Now, double-click the Data folder. Double-click the Library folder. Double-click the Autosave Information folder. If you find an Unsaved Pages Document in this location, understand that this is the display name, and it has a hidden .pages file extension. Double-click this document, and if you are lucky, it will open in the default version of Pages and you may be able to recover some of the content you thought was lost. If so, immediatey press the option key and choose File > Save As... and name and save the document in your login directory/Documents folder.
Good luck. -
Purchasing Doc. No with reference of Material Document no?
Hello Experts,
can you please help with the T-Code where I can find the Purchasing Document no with reference to the Material DOcument no?
Thanks in advance.
Regards,
Yawar KhanHi Polly,
Thanks a Lot for your help, I was able to get the solution with your suggestion.
Points awarded..............
and thanks to all the other people Kilas, sangeeta, and jayakanth.
Regards,
Yawar Khan
Edited by: 1234_abcd on May 27, 2011 11:30 AM -
Find Material Document with Movement type 103 for material document 105
Hi experts,
In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
Regards,
AbdullahHi,
you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
Regards,
Chaitanya -
COPA document is not visible for a material document ?? Why
Hi Experts,
We have a material document, for which we have accounting doc and CO document respectively. But we don't have a PA document(not Visible). Any Idea why it is not visible.
Moderator: Please do not ask basic questionsHi ,
I am really very much appreciate your cooperation for the issue.
When i try the same through KE4S in test run system is showing the below lines.....
Number of billing documents read: 1
Number of line items to be transferred: 0
No. of billing doc. items already transferred: 0
Number of billing docs with errors: 0
Note:- Number of line items to be transfered 0 then there is nothing to transfer to COPA.
Please suggest. -
The Document header txt and Reference Field are empty
The BKPF table is not populated with
BKTXT and XBLNR for document type TE
on Posting
Is there any configuration
where i can see the issue
please adviceAll the posting is done via standard SAP programs set up as jobs
RPRTEC00 to settle trips
RPRFIN00_40 to create posting run
RPRPOSTD to post the entry
on checking the OBA7 the reference field and document header text are not checked
in bothe Q and D systems
But in D system the values appear on repeating the same in Q the values are not there
Please advice
Shall i recomment to Check these two entris in OBA7 and then give a try -
Invoice verification with reference to material document
Dear Experts;
i want to make invoice verification (MIRO) with reference to good receipt document not the all quantity in the purchase order. is this possible ???Hi,
Option - 1
If you have done 3 separate GR's for the above qtys then if you do MIRO with reference to PO then 3 line items will appear with the respective qtys. You select the one you want & delete the rest.
Option - 2
Check whether you have entered any values in the delivery note field while doing GR. If yes then do MIRO with reference to Delivery note rather than PO so that qty in the GR material doc will flow to MIRO automatically.
Thanks & Regards, -
Submit a document for approval and accompany with supporting documents
Frequently, the document that is being submitted for approval, requires to be accompanied by supporting documents which may be Excel spreadsheets and/or Word documents and/or Autocad Drawings and/or PDF documents.
How can I route these supporting documents along with the document being processed for approval?
Thank you very much for your guidance.Do you have Sharepoint Standard License?
I think what you need is start working with Document Sets. You can create workflow to Documents sets that treat multiple documents as if it's an archive.
http://blogs.technet.com/b/vedant/archive/2010/04/21/using-the-document-set-feature-in-sharepoint-2010-part-1.aspx -
I have started to work in Indesign CS5.5. Ater saving all my pages in indd and open them again. Now they are not editable what is wrong?
Are your layers or objects locked? Did you do all the initial editing on your master pages?
-
Commercial invoice number and Goods receipt Material document
Hello,
Can any one guide me for the following...
we need to develop a report where we need to track the For each good reciept number the corresponding invoice number...
Thanks
RaheemHi
While doing GR use delivery note number.
The same you follow for Invoice verification also. With ref. to delivery note you do the IV.
Then i feel it will be esay to correlate the GR and IV.
Regards,
Raman -
I Am trying to send an employment application that I have saved to Adobe. Each time I email it to the recipient it arrives blank. What am I doing wrong?
Hi Lee61,
What email client are you using to send the PDF file? If you have a free Acrobat.com account, you can upload your file to your account, and then send a link to it to your recipients.
Best,
Sara -
Physical inventory document creation for split valuated material
Hi
We are doing stock count in our company. We are using split valuation for some of the materials. When I tried to create a PID for split valuated material which are not in stock, system issued a standard error message. What I understood from that error message, we can create a PID for split valuated materials which are in stock. Is it so? If so, then how can we count split valuated material?
Let me know if you need any info.
Thanks in advance..
Jeny...Please refer to SAP note 30254 and it should help.
Symptom
If you create a physical inventory document for a material in a storage
location without existing storage location segment, error message M7006
is displayed: 'Material & (material number) & (plant) & (storage
location) does not exist'. Thus, a storage location segment is not
created automatically for this material.
The same also applies to the batch segment. The batch segment is also
not created automatically but, if a batch is specified for a material
when creating a physical inventory document, that is not yet created for
this material, error message M7042 is generated: 'Batch & & & & does not
exist'.
The same applies to the special stock segments which are also not
created automatically. Different error messages are generated here
depending on the special stock (see also Note 64448).
Additional key words
MI01, MI09, MI10, M7076, M7183, M7184, M7185, MARD, MCHA, MCHB, MSKA,
MKOL, MSKU, MSPR, MSLB
Cause and prerequisites
If no storage location segment or batch segment or special stock segment
exists to a material, this then means that a goods movement did never
occur before in the system to this material (batch) to this storage
location (special stock), that is that the material (batch) never had a
stock to this storage location (special stock) in the system before and
that it was never posted before on this segment. It is therefore not
possible to carry out a physical inventory for such a material (batch).
It is different, if a goods movement has already occurred to a material
(batch) to this segment and if only the present stock is zero. A
physical inventory is then necessary and also feasible for this material
(batch) since the different segments are not deleted automatically in
the moment in which the stock becomes zero.
Solution
For a material for that no storage location segment, batch segment or
special stock segment exists, it is not necessary, to carry out a
physical inventory on this storage location or for this batch or this
special stock. If, however, a quantity is physically found to such a
material, the corresponding segment must be created before the physical
inventory.
There are 3 options to create storage location data:
- maintain the 'Storage' view in the material master for the
material and storage location or
Page 2
- use the 'Enter storage locations' function in the material
master or
- post the first goods receipt (providing, the automatic
creation of storage location data is permitted in the plant
and for the movement type).
There are 2 options to create batch data}:
- create the batches in the material master manually via
function 'Create batch'.
- post the first goods receipt for the batches to the respective
material.
You can only post the various special stock segments via posting a goods
receipt. An exception is special stock 'K' (vendor consignment). You
must define a consignment price in the material master for this special
stock using the 'Create vendor consignment' function before a goods
receipt can be posted for this special stock.
Maybe you are looking for
-
Unable to open the file in USB
I stored many files in a USB drive many months ago. I tried to open the files in USB, but found that all the files become 1 file called ''ReadyBoost''. It has 1.6M KB. I tried to open the "ReadyBoost" file but cannot. I used some USB recovery softw
-
Condition type ICN3 is blocked in FTXP.
HI. people. Somebody knows to tell me how can i do to active the condition type ICN3 in transaction FTXP? The line is black and i can´t do any changes. The line should be in blue, either the others. I don´t know what... Thank you.
-
I have recently changed my cpu and video card from an AMD Athlon 64 3500/XFX 6800gt AGP to an AMD Athlon 64 x2 4800 duel core/XFX 7800GS. I think I may have a problem, but I'm not sure. Windows is very stable and quick. In device mgr. and task mgr. I
-
Repeated 'mac OS X wants to make changes' prompt
In the last few days, I have started seeing a really annoying problem. Some apps (e.g. Shrook) have now started displaying the prompt Mac OS X wants to make changes. Type an administrator's name and password to allow this. Mac OS X wants to use the
-
How do I enable inline autocomplete for Firefox 5.0.1 Mac?
I just installed Firefox 5 on my Macbook, and I'm trying to enable inline autocomplete (like that found in Chrome, IE, and Safari). I've followed the instructions that I found on the internet (about:config, set browser.urlbar.autoFill to true) but au