Physical Inventory Movement Block not Rest at Storage Location Level

Hi,
We are facing a typical problem in our Production System and the issue is as follows:
1. We have created a Physical Inventory Document for a material with Freeze Book Inventory and Posting Block indicators.
2. We completed the count and entered the same with reference to the PI Document.
3. We reconciled and posted the differences in the system.
4. We still find that in Material Master the Physical Inventory block for material movements was not reset automatically at the Storage Location stock view.
Please help us urgently as all our Goods movements for this material are held up.
Thanks

Hi,
I am able to see 4 PIDs in MI22 for my material.
2 docs pertaining to the latest Annual Physical Inventory in 2010.
These documents are for the same material in the same plant but for different Storage Locations. Out of which when i see the Material Master - Storage Location view, i see that the Physical Inventory Block "X" is set for one of the Storage Locations.
The PID for the Storage Location with this Physical Inventory Block for Movements indicator, is already settled (Count done and no differences in physical and book stock in this storage location).
The problem persists and i need to remove the posting block which was not reset.

Similar Messages

  • Multiple physical inventory document active for same material-storage locat

    hi experts,
    I am using transaction code MI31 for creating physical inventory document for all materials at a particular warehouse(storage location). User is selecting direct generation of of PI documents in the transaction. If by mistake he presses execute button more than once system is creating as many copies of physical inventory documents. As per ERP system logic it sound very wrong to have multiple physical inventory document active for same material-storage location ( no batches or special stocks exist ).
    Is there a message number or some standard setting to prevent such occurrence.
    regards
    Avinash

    Hi,
    Syetem won't create again physical inventory document, if allready PI is active for the same part number,  plant, storage location & batch/valuation type.
    Check your PI documnets
    Regrads
    KRK

  • Movement type authorisation for different storage locations

    Hi sdners
    can we make the movement type restricted to any storage location
    Ex: i have 2 storage locations 1110 and 1114 in plant 1100
    and i have two end user mst1 mst2
    if so i want to make sure that mst1 is responsible only for issue goods from 111o
    and he should not able to issue goods from 1114 vice versa to mst2
    is there any possible configuration please let me know.
    With regards
    S.K.chaitanya

    Hi
    u can achive this through authorization
    First
    You need to activate the storage location authorization check for goods movements in config
    SPRO->Materials Management->Inventory Management and Physical Inventory->Authorization Management->Authoization check for storage locations.
    Then required  control is achieved via authorization object M_MSEG_LGO.
    Get in touch with Basis and ask him to remove required storage location from user ID so that that user will not able to pass any movement to that storage location
    Vishal...

  • Need Inspection lot creation at only one storage location level - QA07

    Hi,
    I have shelf life expired material at different storage location. When ever i run QA07.System generates inspection lot for all storage location.But I want to process the inspection lot for only one storage location. Please guide me how can we map this reqmnt.
    Thanks in advance for your relevent response.
    Thanks & Regards
    Kundan Kumar

    Hi,
    Next inspection date is maintained at the batch level, not at the storage location level.
    You can suggest the following solutions if it is feasible in your business scenario.
    Scenario 1: Batch is inwarded in one storage location"A" & stored for some time, then it is transfered to other storage loactions B & C (like production storage locations).
    In this case suggest to transfer the batch to storage loactions B & C just one or two days before the actual consumption of the batch & also keep the opening period  in QA07 sufficient days (between 10-15 days), so that the sytem will create the inspection lot in one storage location "A" . Since the batch is still not transfered to B & C, the system will not create inspection lots in B&C.
    Scenario 2: Batch is inwarded in all the storage locations with the same batch number.
    In this case suggest to inward the same bacth with different batch numbers, keeping the all other characteristic values same
    With Best Regards
    Vithal

  • ATP Check issue for storage location level

    Hi Experts:
       I met a problem when carry out the ATP check, when I create the SO for material A 1 pcs and not maintain the storage location in sales order, ATP carried out and gave me the proposal delivery date(100 days later)  for about this material, the system can not check the storage location level.
       the real situation is for material A, in stock 1000 has 100 pcs, in stock 2000 has 50 pcs, and in stock 3000 has 30 pcs.
       How can the system automatic check the storage location level even I not fill in the storage location in the sales order?
    Thanks and best regards
    Jin

    Jin,
    For this check
    1)Youe storage location shd be automatically determined..Make sure you've done all settings in 0vlk/0vlp..
    2)In MMR-MRP2 make sure you have entered Prod Storage Location..Also in OVZ9 check what stocks you have selected for ATP  for particular check rule..
    3)Also in VA02 Go to Environment-Availability overview..
    REWARD IF U FINDS THIS AS HELPFUL..
    Regds
    MM

  • Material is blocked in Plant and storage location due to Physical Inventory

    Dear Experts,
    Our user trying "Post goods issue against 201 movement type,but its giving error message
    "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
       location 2101 due to a physical inventory".     
    we are not using any physical inventory here,give me sugestion.
    i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    Thanks in Advance
    varun

    >
    madhu varun tirupati wrote:
    > Dear Experts,
    > Our user trying "Post goods issue against 201 movement type,but its giving error message
    > "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
    >    location 2101 due to a physical inventory".     
    > we are not using any physical inventory here,give me sugestion.
    >
    > i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    >
    >
    > Thanks in Advance
    >
    > varun
    >
    madhu varun tirupati wrote:
    > Dear Experts,
    > Our user trying "Post goods issue against 201 movement type,but its giving error message
    > "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
    >    location 2101 due to a physical inventory".     
    > we are not using any physical inventory here,give me sugestion.
    >
    > i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    >
    >
    > Thanks in Advance
    >
    > varun
    Dear Experts,
    We have a simulation in our quality server,even though a physical inventory document is existed for the material,doc  status showing active in MI22,but its allowing me to issue goods,but its not allowing in our production system.
    please give

  • Physical Inventory at Storage location level

    hi.,
    Environment  ECC 6.0
    Our suggestion on Physical inventory at the client site was as per SAP
    "If the flag for posting block is set then no movements can be posted for that material. Note that the inventory document should be created at a material / plant / storage location level so as to not block that material at other storage locations. If a block is not required then do not flag the “Set posting block” indicator. It is always prudent to restrict the amount of materials being counted and to clear the count results quickly so business is not interrupted"
    CLIENT feedback: " Like wise we asked the client to make the selection by Plant = 1000, SLoc = 100, and WBS =2312-344-332 and checked Posting Blocked.
    My understanding was that this selection would block only the 1000/100/WBS location.
    Client is having a problem is that people trying to transact in a SLoc other than 100 (200, 300, 400)  are experiencing the “Blocked” warning.
    I know I heard that we can inventory a Storage location in SAP and lock it and the rest of the sites could continue without interruption.
    Any suggestions on how we can achieve this.
    Tx

    Hi,
    Are you setting teh posting block at the time of creation of physical inventory document or by running MI32 later?
    If you are running MI32, then ensure that you enter teh storage locations correctly, else the material irrespective of storage locatioons may get blocked.
    Hope this helps

  • Material block for sale in plant-storage location level

    Dear experts,
    Please help me how to block a material to sale in plant-storage location level.
    Thank you.
    Regards,
    Badruddoza

    The standard sales block (MVKE-VMSTA) in material master is valid for sales organisation / distribution channel combination (VKORG, VTWEG) - this means you cannot do it for Plant / SLoc combination,
    What does it mean to block it at plant / sloc level? Generally in SO you do not specify the storage location. Or you are speaking about MRP also? In this case you could use SLoc-MRP (with proper availability check in delivery) for your material but the problem is that a plant might be assigned to several sales area and this SLoc would be hidden for them also.
    Could you please specify what would you like to achieve, what sales block means according to you?
    Regards,
    Csaba

  • Material deletion flag at storage location level is not working

    I have a material that is created in some plants and also in some storage locations within each plant. If I mark the deletion flag at plant level I am not able to create a PO -> Me051 error message appears. Whereas if I mark the deletion flag at storage location level nothing appens. I am able to create a PO and also to create to goods receipt. Is there any customization that I should do in order to get the error message?
    Thanks in advance.

    storage location level deletion flag is not checked at order creation.
    it is assumed that you can change the storage location when you do the receipt.
    MRP run is at plant level, so the requirement is valid even the storage location view is flagged for deletion.

  • Can i restrict a movement type with respect to storage location

    Hi
    Is there any way to restrict the movement type for a particular storage locations.
    For eg.
    If am using a Mvt 311 tP btwn storagelocations.
    If there are 10 Stlocs in my plant i want to restrict 311 only for 7Slocs.
    Is it possible
    Guide me
    Sunil

    Sunil
    Please contact your BASIS security team , with the help of Authorization roles you can restrict
    Reward if helpful
    Regards
    venu gopal

  • Report on QI, Blocked, Returned Stocks at Plant & Storage location level

    Hi,
    Would like to know any reports which gives QI, Blocked, Returned stocks at Plant & Storage location level.
    Regards,
    Vengat

    hi,
    What do you exactly mean say by "Returned  stock"..
    Also go through by MMBE tcode ...
    Regards
    Priyanka.P

  • Move all materials in a storage location to another storage location

    Hi,
    is there in SAP a trx which moves automatically materials from a storage location to another storage location ?
    Regards

    is there in SAP a trx which moves automatically materials from a storage location to another storage location ?
    There is no t code for  automatic goods movement.
    Have to do manually with t code: MB1B or LSMW

  • Delivery is to be done at the end user location not at the storage location

    Hai Gurus.
       I have a problem
    I am working for a construction industry.. I had a storage location at say" X":. And in case of emergency for the material to the end user at different locations, delivery is to be done at the end user location not at the storage location.. Where to give the end user location address .As delivery address in PO item details will be plant address. pl help
    regards
    chandrasekhar

    As i underdstand from your  description of issue .You dont want to recive the material in the storage location of your  main plant but you want to recive the goods directly to the end user from the vendor.This is typical scenario of Third party PO ..so kindly traise third part PO to vendor ..by changing the item category ...and so the delivery addfres popolutaed in ur PO will be directly from the ship to address from your sales order.rathewr than the storgae location you wd have specified in ur material master

  • Storage Location level ATP check with CRM

    Hi:
    I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
    Some background on supply
    EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
    First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
    Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
    One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
    Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
    Please share any experience that you may have in this.
    Thanks,

    Hi Satish,
    In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
    What we did is as follows:
    - We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
    Plant A - AFC
    Plant B - AFC
    Plant C - AFC
    - We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
    I hope this helps.
    Please let me know if you have any questions.
    Thanks,
    Anupam
    Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

  • Storage Location Level ATP check through CRM

    Hi:
    I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
    Some background on supply
    EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
    First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
    Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
    One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
    Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
    Please share any experience that you may have in this.
    Thanks,
    Satish

    Hi Satish,
    In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
    What we did is as follows:
    - We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
    Plant A - AFC
    Plant B - AFC
    Plant C - AFC
    - We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
    I hope this helps.
    Please let me know if you have any questions.
    Thanks,
    Anupam
    Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

Maybe you are looking for

  • Access Denied when trying to access shared folders on the server with administrative privileges

    I have problem accessing shared folder on the server machine from Windows 7 machine even if I try to access it with administrative privileges (server Administrator account). I will try now to explain better my situation. In my company, we have small

  • Am I the only one?

    My ipod mini, which I've owned for LESS than 1 year now, resets itself automatically. Not only does it reset itself and erases all my songs, it fails to be read by my PC or iTunes. After the first time it reset itself, I sent it in to be repaired, wh

  • How to change purchase order logo & company name in runtime

    Hi Experts,           In Sap B1 9.0 i am adding a purchase order.after that i want to take a preview of that puchase order to take print out.but in my situation am having 2 logos and company names.while adding first purchase order i need a logo1 and

  • Rules of thumb for sizing an Oracle BPM 11g deployment

    Anyone out there have some rules of thumb they are using to size out an environment for Oracle BPM 11g? I know processing power can vary widely for process complexity and amount of data floating around. Still, I get asked questions like how much proc

  • How to get rid of a whiteout

    To experiment, I created some whiteouts in a subdirectory of /tmp (contained on a HFSXJ partition) via mknod w. I now seem to have no way to get rid of them (nor does a reboot get rid of them). How do I delete the whiteouts?