Physical Inventory Status Flag Not Reset after Year End Inventory Procedure

Hi,
We are just done with the Year End Inventory Procedures, and to my surprise, a lot of Storage Bins are having their Physical Inventory status flag as ACTIVE, which they should not have.
An example bin has incorrect status-u201Ccountedu201D in the associated inventory record number . LINV status is L-cleared. LINK status is Z-counted, LINP status is Z-counted and physical inventory flag is ON in table LAGP, but status must be L-cleared and physical inventory flag should be OFF (or blank) in table LAGP.
Our users did not use LI20 to clear the empty bins or bins had no difference to post (meaning book qty & count qty are the same).
I already tried the Program RLREOLPQ and OSS Note 824904, but no its of no use in our Case.
Any guess/hint for the problem?

I solved this with thehelp of a Zprogram writeen wrt the OSS note mentioned above in the question.

Similar Messages

Expenses not closed after year end

Dear All:
I have a query, our last fiscal year ended at 30.06.2009 but upon analysis of some GLs relating to expenses i observed that they were not closed. Principally they should have been closed automatically as the year ended but they did not. What can be the possible cause. Please guide if there is any problem in back end configuration for these expenses GL relating to manufacturing costs.
Regards

As explained earlier in couple of instances above, there is no closing as such and once you have done the carry forward of the balances, you would find that the B/S accounts have been brought forward but the P&L Accounts (Expense & Revenue) Accounts have been transferred to the Retained Earnings Account. At the year end the system calculates the net earnings amount by deducting total liabilities from the total assets and posts the same into the Retained Earnings Accoungs, at the same time, the B/S account balances are carried forward to the new fiscal year. You can also run a GL Balance Dsiplay Report using FAGLB03 and would observe that in the opening balance in case of P&L A/c indicated as "Bal. Carryforward" is zero but in case of B/S accounts there is a positive or negative figure depending upon debit or credit in last year's balance.
Hope this helps.
Regards

HT201401 After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

Status Flag not appearing if branching

I have a CP project with branching after a question slide (slide 14). If the user gets the question wrong, they follow an alternate path to slide 15 to review the correct answer. Then they hit slide 16. If they get the question right, they skip slide 15 and hit slide 16. The user who gets the question right will never see slide 15, thus making the TOC think they didn't see all the slides. The TOC will not mark the module as complete with a status flag. Help?

Hello,
TOC can help users by marking slides as seen. But you have to be aware that only slides that are completely viewed will get the status flag. It is also great for self paced learning, for navigation. From your question I understand that you want it to take over the role of a LMS: completion of a course is normally reported by the LMS. Even there a branching in a course will cause problems if you want to have a Completed status reported. For a LMS you could indicate which % of slides have to be watched.
What do you really want to achieve with the TOC? Perhaps it could be realized with some variables and advanced actions.
Lilybiri

Release strategy does not reset after PO change - tried changeability 4 & 6

Hi,
After my PO is released, I change the item quantity/price such that the net PO value (increased) is changed MORE than the tolerance % set in the changeability. I expect that the PO release should be reset but it does not.
However if my PO value is changed (increase) such that my PO value is now in a different "release bracket/range" -- as it falls into a different release strategy, then the release is reset.
Could anyone advise me what is wrong? I tried everything - i tried changeability = 4 and 6. i deleted the whole release class, release strategies and recreated -- nothing.
According to OSS note 493900 below, it should reset when the tolerance % is breached.
I'm on SAP 4.7.
Anyone could advise?
thanks!
     3. Question :
     Why is the release strategy not reset ?
     Answer :
     A reset of the release strategy only takes place if
            - the changeability of the release indicator is set to '4' in
               case of a purchase requisition and '4' or '6' in case of
               another purchasing document (purchase order, request for
               quotation, contract, scheduling agreement),
            - the document is still subject to the previous release
               strategy,
            - the new TOTAL NET ORDER VALUE is higher than the old one.
     The total net order value is linked to CEKKO-GNETW for a purchase order,
     CEBAN-GSWRT for a purchase requisition item-wise release and CEBAN-GFWRT
     for a purchase requisition overall release.
     If you have maintained a Tolerance for value changes during release
     (V_161S-TLFAE), the release strategy is reset when the value of the
     document is higher than the percentage you have specified and if the
     document is still subject to the previous release strategy.

Hi,
Thanks.
The release strategies are able to be determined correctly when the PO is created so I guess that means its all setup correctly?
The issue is only with PO change - how to cause the reset when the PO value increases by more than the tolerance %.
cheers.

My ipod will not reset after several attempts

I recently bought a new Iphone and have successfully transferred my apps/data from my Ipod Touch (4th generation). I am now trying to "erase all content and Settings" via the settings button. All I get when the screen goes black is the apple logo. NO progress bar whatsoever. I have tried this several times even leaving the device (plugged into a power source) on all night long and still nothing. It simply will not reset. Is there something else I need to do? I have deleted all apps and anything else from the Ipod in hopes that would work but still nothing. It just locks up in the reset mode. Then when I restore it to stop the process most of the deleted apps come back. HELP!!
P.S. There is no Apple store nearby to help me with this so I'm hoping this forum will.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Year end closing procedure

Hi
I want to end the fiscal year 2008-2009 of my client and start 2009-2010.
I dont know the procedure for doing it. Please suggest me procedure for it.
Thanks

hi,
Check this links
https://forums.sdn.sap.com/click.jspa?searchID=24168576&messageID=7207229
https://forums.sdn.sap.com/click.jspa?searchID=24168576&messageID=7116133
https://forums.sdn.sap.com/click.jspa?searchID=24168576&messageID=7207871
https://forums.sdn.sap.com/click.jspa?searchID=24168576&messageID=6825204
https://forums.sdn.sap.com/click.jspa?searchID=24168576&messageID=7216984
https://forums.sdn.sap.com/click.jspa?searchID=24168576&messageID=6775302
Year End can be do just once?
Jeyakanthan

Data not reset after 3 days on new billing cycle!!!

My data has STILL not been reset and I'm three days into this billing cycle. This is very frustrating because, with four people in my family sharing data, I need to be able to track data. When I called customer service, they said not to worry because they could see (on their end), that it had been reset and that we've only used a fraction of a Gigabyte on this new billing cycle. I guess it just really bothers me that when I look it up (text DATA, app, website), they all say that we are almost to our 6G limit. I need to be able to keep track of data without calling customer service and being put on hold for several minutes. Is this a common problem and is there a way to resolve it?

I am equally frustrated, last month was my "first month" with the jet pack, got text message alert use 75% of data package had not even use 30%, after being on hold for several minutes I was told oh don't worry accident, system having problems, now 3 days into new month appears we have used more than 1/2 our allowance & haven't even been on our phones or gotten any alerts re:usage. I was totally mislead on speed of the jet pack & have gone to store & called customer service. I have been a Verizon customer for 13+ years but customer appreciation isn't important to Verizon.

Status is not updated after Save in the transaction but after closing and

Hi
In CRM GUI and PCUI,
1) Opening a transaction (say an Invoice)
2) Changing the status from 'Open' to 'Completed'.
3) Save it
4) after save, the status shows as 'Open' (but it should show as completed) but if we come out of the transaction and come again to the same transaction, we can see now that it is in completed status.
Is there any thing to be checked or SAP usually works like this?
As whenever an user change the status from open to completed, an follow up activity is created, since here the user see the open status again in the same transatcion (after saving), he/she again change the status from open to completed and save.. so it now creates two follow-up activity..
Please help.

HI
i had similar issue when I planned callback after saving document (function module with commit was doing sth).
This commit caused that status displayed on my document was previous not actual. When entering document again status was ok.
So check if there are any function modules with commit launched after you save document (of course I do not mean standard commit for saved document).
Regards
Radek

Contribute 6.5 can not ftp after years of no issues with CS4 and CS5

The problem
Contribute 6.5 can not connect via ftp using settings that formerly worked (and still do) in CS4 and CS5.
How we ended up here
I am the administrator website where
Our content editors have been using Contribute CS 4 and Contribute CS 5 without issue, 6+ years.
We are trying to upgrade to CS 6.5 to better support HTML5 markup now used within the site.
When attempting to configure a website connection in 6.5, Contribute alerts:
"Contribute cannot find the website files on the server. Please contact the website's administrator for assistance."
After closing the dialog box the failed connection is removed from contributes website connection list.
We have a shared hosting account and utilize ftp to publish changes.
Server is Win2008 with IIS 7.5
Again it's shared hosting, so read/write ftp are scoped to our account's directory.
We attempted this on serveral pcs including on a PC with a fresh install of Windows 7.
We can still connect successfully via ftp with CS4, CS5, dreamweaver, and Filezilla.
Which is why I believe this to be a Contribute 6.5 issue.
I've attempted the following troubleshooting articles:
Use network I/O logging to log operations, identify problems
I compared the I/O logging for both CS5 and CS 6.5 which both appear to log the same diagnostic steps.
Contribute FTP Server Checker (quite dated)
All successes reported. No failures.
Troubleshooting a Connection CS4 (linked from with CS 6.5's help UI)
As indicated above, alternate FTP clients have no issue.
This appears to be similar issue to the following posts:
5301620 - HELP - FTP Connection Error with Contribute 6.5
5907180 - Contribute 6.5 can no longer connect to sites ...
Unfortunately, there has been no solutions posted on either of these threads.
Any help would be greatly appreciated.
I can PM the network I/O log details if there is adobe staff who can get them in the right hands.
(Again the logs only show successes.)

@Zaldomoh
Have you found a solution or been given assistance from Adobe to resolve this issue? I'm having the same problem (CS 6.5 ftp'ing to a shared hosting enviroment). Details of our situation can be found on thread 1384686

ITunes Sharing Not Working After Years of Working Great

After many years of iTunes Home Sharing working great with an old Mac Mini and a large shared library of music and videos, I decided it was time to upgrade the system with a new Mac Mini (bought a few weeks ago) with a nice OWC external hard drive for the data.
I am now having problems sharing on all devices. On AppleTV it has trouble finding the shared library.
On another Mac in my home it shows the shared libary in iTunes, but when you click on it to use it it gets stuck on "Loading".
The only thing that solves the problem is for me to go to the iTunes computer and shut off and restart iTunes. That will then work for a period of time (not very long) and then we go back to the problem.
I have checked all the settings and nothing seems to be wrong.
I am using the latest versions of everything.
Any ideas?
David

Hi Roger,
Tell us what silly Belkin you have please.
If it has Ping Blocking then turn that Off.
If it has DOS (Denial of Service) Turn that Off.
Same with anything for SPI (Stateful Packet Inspection)
If this is Cable I can't see that "Too Far from the Exchange" is even relevant.
What Internet Speeds (UP and Down) are you getting ?
http://www.speedtest.net/
This page may also help.
Defcom and I are in Table 2
http://www.ralphjohns.co.uk/ContactTesters.html
8:50 PM Tuesday; April 6, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Safari not resetting after Mavericks

hey.
It might just be a coincidence, but the first time i noticed this was after updating to Mavericks on my macbook pro: when i reset safari (safari>reset safari> everything checked) everything works good, my history's clean, the window reopens itself, but once i go and google something, the pages i've been on are still marked. Other additional things i've tried are clearing the history (history>clear history), remove all website data (preferences>privacy) and also empty caches (from the develop menu), individually and together. Nothing works.
I haven't found anyone else with this problem, so is it just me, should i take my computer to a mac store or is there some glitch with safari or mavericks, or is there just something i'm not doing correctly?

hey.
It might just be a coincidence, but the first time i noticed this was after updating to Mavericks on my macbook pro: when i reset safari (safari>reset safari> everything checked) everything works good, my history's clean, the window reopens itself, but once i go and google something, the pages i've been on are still marked. Other additional things i've tried are clearing the history (history>clear history), remove all website data (preferences>privacy) and also empty caches (from the develop menu), individually and together. Nothing works.
I haven't found anyone else with this problem, so is it just me, should i take my computer to a mac store or is there some glitch with safari or mavericks, or is there just something i'm not doing correctly?

Pegasus R4 Will Not Reset After Power Outage

I have a Pegasus R4 hard drive system connected by a Thunderbolt cable to an iMac. It has bee functioning flawlessly for several months. We had a power outage during the day and ever since the R4 has not been able to reset. Anyone have any advice out there on this issue.

Not trying to be a stick in the Mud here but you guys that are serious gamers need to always keep a close eye on the weather. If there is the possibility of a storm you must have an APC or Battery Backup. Just a Power Strip is sometimes not enough. Of course you have No Control over Power Companies cutting your Power and causing a Power Surge that fries your equipment. Please Please be aware of the weather I cannot tell you how many things I have cooked over the years by not taking this advise. It can save you thousands of dollars.

InDesign 2.0.2 will not load after years of working just fine

We are publishing a book (200 pages with a number of color pictures etc) and near completion. We have been using InDesign 2.0 for a long time without any problems.
Last night, all of a sudden, InDesign 2.0.2 would not load at all. It "quit unexpectedly" and a report was issued. We are using Mac OS X 10.4.11. All other applications and Mac OS X are working just fine.
As a point of reference, my husband logged on to my computer separately and was able to open InDesign 2.0.2 and the file we backed up the night before. However, we need to complete the book under my user id as all of the work has been done there.
Could someone please assist. We are under the gun to meet a publisher's deadline.
Many Thanks in advance.
Nancy

Buko
Yes, Many, Many Thanks!
It worked. Apparently the "Saved Data" file in the userid
preferences was corrupted.
You are our hero.
Bill Hecker

Inventory DB will not Configure after 6.5sp4a

I've recently installed NetWare 6.5sp4a on my zen server and it's broken
my inventory. When I attempt to configure the DB ConsoleOne hangs (both
on admin workstations and the server itself).
There are no errors on the ZEN Inventory screen - however, the logging
isn't very verbose. (Does anyone know the command to enable verbose
logging on the Inventory screen?)
I have the SP4 backed up and can rev back - However, I would rather see
if the problem can be resolved and use backing out of the service pack as
a last resort.
Has anyone seen this or had similar problems?
Thanks.
Matt.

On Mon, 12 Dec 2005 15:49:14 GMT, [email protected] wrote:
> There are no errors on the ZEN Inventory screen - however, the logging
> isn't very verbose. (Does anyone know the command to enable verbose
> logging on the Inventory screen?)
you wont get anything on the screen but in the log file..
but wonder if anything would show up..
Try enable debugging....
http://www.novell.com/documentation/...rts/zdprts.pdf
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Physical Inventory Status Flag Not Reset after Year End Inventory Procedure

Similar Messages

Maybe you are looking for