Physical movement of SAP Servers ( Procedure,Odds n Cons, Pre/Post Steps )
Physical movement of SAP Server and Pre,Post steps ?
Hello Experts,
Need your help here.. Our Data Center is moving to Different Place , hence IM team proposed Physical movement of SAP Server to New Location.
In our Landscape we have SRM 4.0, XI 3.0 & BW 3.5 , ITS 620 and Requisites Servers available . As these are out of SAP support we don't have expert for ITS and Requisite Server installation and configutaiton.
Please please tell me Will this process work ? if yes then what are odds n cons in this procedure , Pre and Post Steps need to perform.
Please help me as early as possible as we need to take decision ASAP.
Thanks and Regards,
Raja.
Net-weaver Consultant.
Hi Raja,
You need to take care of following
1) Ensure that IP address and hostname are retained in the new DC. If IP is changing you need to take a note of all the RFC and JCO connections where IP is used and replace them with hostname.
2) For ITS you can re-install and re-configure. It is not a big task.
Make a note which all places ITS is configured.
3) You need to have full offline backup of the system before movement.
4) You need to plan for some System integration testing post movement to ensure things are working post DC migration.
Some useful information can also be found in http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc
Hope this helps.
Regards,
Deepak Kori
Similar Messages
-
SAP Servers not showing up in Server Explorer...
Hi,
I have just installed v2 of NCO and everything has installed fine. Also tested a previous application written for v1 NCO and works fine.
But for some reason or other I can no longer create a sapproxy with V2. I followed the tutorial in VS2003 to the tutorial point in bold:
Procedure
1. In Visual Studio .net create a new Visual Basic or C# Console application
2. Add an SAP client proxy to your project as follows:
a. From the Project menu in Visual Studio .net, select Add New Item.
b. Select SAP Connector Proxy as a template and choose Open.
c. Switch to the VS .NET Server explorer.
<b>d. Right-click on SAP Servers and select Add Server.</b>
All I have is a Servers node that lists previous servers and a data connection node for SQLServer. There is no node called SAP Servers. Obviously this is the fundamental reason why I cant create a proxy as per tutorial notes.
Maybe the installation may have missed something, but I had no problems with the installation at all and like I said apps I had written in V1 are working.
Please help...
thanks
KurtOfer, I spoke too soon.
I now have the SAP servers coming up and the BOR and Functions folders now. But When I try to create a filter on functions as per tutorial for <b>"RFC_CUST*"</b> it says incorrect username and password. I have tried refreshing this time and still comes up with a RED cross.
This is the same user account as used in NCO v1 app that is currently working with V2 of NCO. I have tried with uppercase password but still no luck.
This is the connection string constructed by proxy:
ASHOST=yamba SYSNR=1 CLIENT=300 USER=dotnetconn PASSWD=ALLREADY LANG=en
Something seems a little weird.
Kurt -
How to manage physical sample in SAP?
Hi,
How to manage physical sample in SAP?
Regards
Ashish JainHi
Physical sample is to keep the sample of a product till its shelf life expiry date. E.g. In case of any shelf life applicable product, the inspected sample will be retained till its expiry date. If any customer complaints are received, on inspecting the complaint, result may be compared with the existing physical sample.
In SAP, Material master should have inspection type 15.
To create physical sample, sample drawing procedure has to be created and attached to the header of inspection plan. With this set up when the lot is created, physical sample will also be created. Result recording should be done for physical sample. Physical sample storage information has to be updated through transaction code QPR2
Regards
Nikhilesh Ray -
Hi,
The purpose of this question is because our company is moving the main headquarters to another plant and we need to move the site, and this also includes the SAP Servers to another location.
So we need to change the IP addresses for every SAP Server that we have.
We have the following architecture:
1 SAP application server defined with hostname SAP-APP (Production system). Operating System is Microsoft Windows Server 2003 Standard Edition with Service Pack 2.
1 SAP DB Server defined with hostname PRODUCCION (Productive DB). Database is MS SQL Server 2000 with Service Pack 4 and Operating System Microsoft Windows Server 2003 Standard Edition with Service Pack 2.
1 QAS and DEV Server with a local Database defined with the hostname QAS_DEV. Operating System is Microsoft Windows Server 2003 Standard Edition with Service Pack 2 and the database is MS SQL Server 2000 with Service Pack 4.
We do not use Print Servers or IP Printers on SAP, we use default printers for every user, using the SWIN: Windows printing via SAPlpd.
Our SAP Version is SAP ERP Central Component 5.0.
Notes related.
And then, we checked the related notes and topics on market place for changing an IP address to a SAP Server and found the following ones:
Note 403708 Changing an IP address.
Note 88346 Changing the RFC destination if IP changes are made.
Note 25917 Changing to /etc/hosts are not accepted.
RFCs on transaction SM59 and table RFCDES
The RFC that we are most worried about are the following:
PRODUCTION:
RFCDEST: CONEXION A QAS
RFCTYPE: 3
RFCOPTIONS: H=10.172.20.14,S=10,M=020,U=EESPINOSAZ,v=E962007D7D3C11AE883C362D16A252D
RFCDEST: SAPNET_RFC
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SAPNET_RTCC
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,S=01,M=0
RFCDEST: SAPOSCOL_SAP_DB
RFCTYPE: T
RFCOPTIONS: H=10.172.20.13,N=
10.172.20.13\usr\sap\PRD\SYS\exe\run\SAPOSCOL.EXE,R=N
RFCDEST: SAPOSS
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SDCC_OSS
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,M=001,U=
QAS:
RFCDEST: CONEXION A DEV
RFCTYPE: 3
RFCOPTIONS: H=QAS_DEV,S=00,M=030,U=EESPINOSAZ,L=E,v=3734043406A307628776795A292D89,i
RFCDEST: CONEXION A PRD
RFCTYPE: 3
RFCOPTIONS:H=SAP-APP,S=00,M=200,U=EESPINOSAZ,L=E,v=A7361E1928457A0626D502BA5F3FB8,i
RFCDEST: SAPNET_RFC
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SAPNET_RTCC
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,M=001,U=
RFCDEST: SAPOSS
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
DEV
RFCDEST: CONEXION A QAS
RFCTYPE: 3
RFCOPTIONS: H=QAS_DEV,S=10,M=020,U=EESPINOSAZ,L=E,v=F004DE7B5EC01E876B998927E7417A,i
RFCDEST: SAP_INTERNET_GATEWAY
RFCTYPE: T
RFCOPTIONS: H=QAS_DEV,G=pynl0x.pypmsa.com.mx,g=smtp.wan,N=/sapmnt/SID/exe/mlunxsnd,R
Is there any problem if we have defined like this the RFC connections?
Are we missing anything using these notes or do we have to consider anything else?
Best Regards,
Erik EspinosaHi,
you are not changing the SAP System Host name, you are only change the IP address SAP Server.
for that you are only worried about the RFC destination which are created using IP address of host,
you need to change those RFC and assign correct IP address.
Production.
RFCDEST: CONEXION A QAS
RFCTYPE: 3
RFCOPTIONS: H=10.172.20.14,S=10,M=020,U=EESPINOSAZ,v=E962007D7D3C11AE883C362D16A252D
this RFC is created under Production system for PRD - QAS connectivity.
H=10.172.20 --> assign the correct the ip address of QAS system.
RFCDEST: SAPNET_RFC
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SAPNET_RTCC
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,S=01,M=0
RFCDEST: SAPOSS
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SDCC_OSS
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,M=001,U=
10.172.20.115 -> check the correct IP address of SAP router running at your side.
RFCDEST: SAPOSCOL_SAP_DB
RFCTYPE: T
RFCOPTIONS: H=10.172.20.13,N=
10.172.20.13\usr\sap\PRD\SYS\exe\run\SAPOSCOL.EXE,R=N
10.172.20.13 -> check the correct IP address of SAP production server host
regards,
kaushal -
Need Help to Move in SAP World
Hello Friends,
Need your Help. Some of my Friends working in Banking line , they are very much intersted to move in SAP world.
Can you please guide me how can i help them.
Thnaks in Advance !!
Vanu.
Edited by: Vandana Singh on Dec 21, 2010 9:29 AMLany, my current ADC environment is in Physical server, so its not possible for me.
Kindly help me to get answers for the below Questions,
hope I have to assign new IP to new ADC and point he clients accordingly.
FSMO role I can check using the netdom query
fsmo command, if something is there I will move to new ADC
Doubts:
DHCP, DNS, Global catalogue, EFS, TSL and WINS are the other area i need some more clarity.
How to check whether the above roles are enabled on DC or not and give me some more insight on those
areas please? -
hi ,am raghu .
i got a new sap servers to cluster .i understood how to do it theriotically but i couldnt understand practically .can any one help me in sorting this. my database is oracle 9i,unix.
i want any screen shots or steps releted to this .Hi Raja,
You need to take care of following
1) Ensure that IP address and hostname are retained in the new DC. If IP is changing you need to take a note of all the RFC and JCO connections where IP is used and replace them with hostname.
2) For ITS you can re-install and re-configure. It is not a big task.
Make a note which all places ITS is configured.
3) You need to have full offline backup of the system before movement.
4) You need to plan for some System integration testing post movement to ensure things are working post DC migration.
Some useful information can also be found in http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc
Hope this helps.
Regards,
Deepak Kori -
Want to move to SAP BW. Suggestion required
Presently I am working in India in the Data Warehousing area as Business Analyst. I have considerable functional experience and very good exposure to Supply Chain. Apart from that I have some exposure to BAAN ERP package. I would like to move to SAP BW. I have access to SAP BW and want to move to SAP BW. Can any want suggest what kind of role I can fit into?
Hi,
I think in most of BW Projects only 1 or 2 developers will be alloted to it. So most of the time you have to handle all things.
When comparing BW project with other DW projects, It is very pretty and easy job. If you have functional knowledge in the learning phase of BW ,It is very good.
So try to learn all things like Extraction,Modelling,Reporting,some sort of Sytem maintanance. And I think Work in Each part is dependent on other parts. i.e Modeling and Reporting are mutually dependent to each other.
With rgds,
Anil -
Want to move to SAP BW. Help required
Presently I am working in India in the Data Warehousing area as Business Analyst. I have considerable functional experience and very good exposure to Supply Chain. Apart from that I have some exposure to BAAN ERP package. I would like to move to SAP BW. I have access to SAP BW and want to move to SAP BW. Can any want suggest what kind of role I can fit into?
bb,
Could you tell me if you have access to a BW system for development or as an end user.
Also I suggest you have a look at BW Projects happening in your company. That would give you an idea.
Also one more thing to do would be to go thru Fu and Fu first ( BW Setp by Step ). SDN please forgive me for recommending this book, it is on an older version but it is the only one in this category. ( Someone has to write a better book ...)
Then get yourself familiar with how DW and BW work , one area where you could fit in would be in Data Modelling and depending on your expertise with Data Modeling you could sell your skills as a BW Data Modeler.
But , the caveat is that getting in head forst as a data modeler is tough , most probably you might have to:
1. Get into a support project and work your way upwards or..
2. Get certified and then go into hardcore BW.
Arun
P.S I am also a Business Analyst of the DW Practice at my company and now full time into BW. -
How to get the list of SAP Servers defined in xMII?
Hi,
We have a requirement to get the list of SAP Servers defined in xMII and show them in a html dropdown field? We know that we could achieve this by using a custom action block.
Is there any way to get this list of SAP servers without using custom action block?
Thanks,
SaraThanks, Udayan.
I am actually looking for a Query Template which can return the list of SAP Servers.
Thanks,
Sara -
Can't create MBO from SAP servers
Hi,
I'm trying to create MBO from SAP servers with Sybase Unwired WorkSpace.
I created Connection Profile and it worked well(Ping succeeded!).
However, I expanded profile tree, no BAPI was shown.
Any ideas what is happening here?
SAP version is below,
SAP
ERP: ERP 6.0 EHP 5
NetWeaver: SAP EHP 2 for SAP NetWeaver 7.0
OS: Windows NT 2x X86_64
Sybase Unwired WorkSpace
2.1.0
Additionally, It worked well in SAP ECC 6.0.
Regards,
Hiroshi SaitoEventually, the problem is resolved.
It related SAP Note 706195.
I did the Solution in the Note, all BAPI is displayed in Sybase Unwired WorkSpace's Enterprise Explorer.
Note 706195:
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_dwb/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373036313935%7d
thanks,
Hiroshi Saito -
Have a problem where I'll occasionally shift my computer (i.e. physically move it, say from the coffee table to my lap on the couch) and it will freeze and the screen will turn into a bunch of horizontal multicolored lines (closer to 100 lines than 5). Usually restarting (by holding the power button to turn it off) works. A few times that has resulted in the three beeps (RAM issue? -- I've since replaced my RAM [it *seemed* to stop it for a while, but maybe not]), but the second time it always works. Attempting to SSH into the computer during this state does not work. Please advise as to what to do/what reports I can run and post. I will take a pic next time it happens.
Here's this info:
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP71.0039.B0B
OS 10.6.8Sounds like a problem with your GPU. Do you have an external display you could connect your machine to in order to test this? If the external display renders the same way, then your GPU is damaged. If the external renders fine, then the CPU display is damaged.
-
How to Physically move my windows hard drive to my mac pro
Is there any way to physically move my windows 7 harddrive to my mac pro and have it boot under bootcamp?
It is never a good idea to move to different hardware, even if it does seem okay and work.
Why not try and see? and then ask what's next.
Obviously you'll have to reactivate when it detects new hardware. -
ERP2005 SR3 Create SAP Stored Procedures Error
Hi Seniors,
I have tried to install SAP ERP ECC 6.0 IDES ERP2005 SR3 , I got the error in installation step 19/26 (Create SAP Stored Procedures).
OS : WIN 2008 SERVER
DB : MS SQL 2008
I have fallow the Note 1152240.
Error log :
ERROR 2010-03-02 12:08:20.282
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
Please help me,
Thank you,
Sagar K> I have tried to install SAP ERP ECC 6.0 IDES ERP2005 SR3 , I got the error in installation step 19/26 (Create SAP Stored Procedures).
>
> OS : WIN 2008 SERVER
> DB : MS SQL 2008
See note 1244548 - IDES ERP 6.0 ECC 6.0 SR3:
<...>
Microsoft SQL Server 2008:
An Installation of this IDES version on MSSQL 2008 is NOT possible.
Please use MSSQL 2005 as database version
<...>
The reason is that the SAP_BASIS support package is too low.
Markus -
Best Practice AV set up on SAP Servers
Hi,
Has anyone come across or aware of any best practice guidelines for AV setup on SAP servers, for example, which files/drives should you exclude and configuration tuning/reg-edits required. We have McAfee as our standard AV and we do use the HIPS component.
Thanks,
MartinMy best advise is:
Don't run AV on a database server but rather reconfigure the local/a firewall so that only those ports are open which are necessary to run the SAP application.
Excluding files may help a bit but neverless, as soon as the AV scanner is installed it will hook up to the filesystem layer and slowing down (maybe not significantly) I/O. I've seen weird side effects in upgrades and patch installations due to an enabled scanner although the database files and executables were excluded from scanning.
If you're urged to run Windows servers then I would put them in a separate network segment with a firewall in front and enable only the necessary SAP ports (and printing ports). This has a number of advantages:
- nasty RPC bugs can't be exploited because RPC to the SAP system should be disabled
- there's no need to reboot the Windows machines on every "Microsoft patch day"
A virus scanner adds, especially for production database systems, an indeterministic risc to the business.
Markus -
Best practice approach for seperating Database and SAP servers
Hi,
I am looking for a best practice approach/strategy for setting up a distributed SAP landscape i.e separating the database and sap servers. If anyone has some strategies to share.
Thanks very muchI can imagine the most easiest way:
Install a dialog instance on a new server and make sure it can connect nicely to the database. Then shut down the CI on the database server, copy the profiles (and adapt them) and start your CI on the new server. If that doesn't work at the first time you can always restart the CI on the database server again.
Markus
Maybe you are looking for
-
Hi, I'm a newbie in ABAP and I want to create a popup with only four buttons (with my options), like a questionnaire, but without cancel button. I see the function C102_POPUP_TO_CONFIRM, I want something similar but without cancel button. can someone
-
ITunes refuses to quit on shutdown
I am using iTunes 6.0.4(3) on a 20" iMac Power G5 OS X 10.4.5 with three AirPort Express units connected to an existing wireless Network. If iTunes is open and I shutdown, iTunes cancels shutdown and then refuses to quit (it quits and then instantly
-
Group by clause will try to group the primay key's
hi all, For my requiremments and to avoid the the subquery i am using join and group by clause in my sql query in oracle 10g r2 database.my question is if i put a primary column the group clause then oracle try to group the records?. i know if we use
-
Business Configuration - Task to Set Default Logistics Area
Hello! I created a customer-specific solution with a BO Extension. The BO Extension includes a field logisticsArea and that field should have a default value, that is defined by the user. The difficult part ist, that the user should be able to set a
-
Hi, Our OBIEE platform is running on IIS Instance. let me know whether we can configure the BIpublisher using IIS or we need OC4J???