Physical samples or reserve sampples
Dear All,
My requirement is that for a material when a inspection lot generated sample size should be 10 and pysical samples to be created as 50 and this samples are stored for future use till exipry for example if a market complaint comes for this batch then they will analyse this physical/reserve samples. Now when the UD is done for the inspection lot these two should be substracted from inspection lot qty means suppose inspection lot qty is 100 then UD to be done for 1000-(10+50) = 940.
Now I know sample size can be configured with sampling procedure with fixed sample size as 10. But how to configue this physical samples qty. kindly guide me how to map this. is this can be mapped through sample drawing procedure ?
then kindly tell me how to do.
thanks
vinamrath
Hi Kumar,
Yes, you have already answered ur question in the end.
It can be easily met by SDP (Sample Drawing Procedure)
Create one SDP (T code QPV2), in SDP there is be sample type "3" for Reserved Samples. Got to that Tab and assign the sample size 50 here.
Assign ur SDP to ur inspection plan (QP01/QP02) Here you need to assign the inspection point 200 - physical sample.
Then rest you know, assign sampling procedure at MIC level defined the sample size 10 to it.
Try with fresh inspection lot. You will meet the requirement.
Regards,
Shyamal
Similar Messages
-
Physical sample and physical sample drawing relationship
Dear all,
When an inspection lot is created in a inspection plan using sample drawing procedure to determine physical sample size, the following two objects created automatically.
Physical Sample Drawing Number
Physical Sample Number
The relationship between these two objects is... one physical sample drawing number can represent more than one physical sample record, am I correct?
Thanks
KarenPhysical Sample Drawing Number : it represents unique number for physical sample
Ex. if you sampled 100 pcs SAP gives Numbe Number for this 100. pcs
Physical Sample Number it gives the number for bifurgation of this qty.
Ex. out of 100 pcs 20 is physical sample 20 for pooled and remaining is reserve etc.
Cheers, -
QM - Record Results for Physical Sample
Hi Gurus!
We are working with sample drawing procedure and when the inspection lot is generatee the physical samples are created too. So, when I record result for one of them and I try to UD the system shows me all characteristics like pending for other phisical samples that I didn´t record the results. I mean, I would like to record just one phisical sample of them. I was wondering if you could inform me there is any way to do it? I am working in release 5.0 from SAP
In advance I would like to your attention,
BR
ValdevairIf you only want to record values on one sample why are you creating a sample drawing procedure that requires more? If you don't use them but just collect them, set them up as reserve samples.
FF -
Display of Qual Characteristics in QE03 for Physical Samples
Hi All,
I am using result recording with physical samples.
I am able to record Qualitative characteristics through transaction QE01. When i want see these "qualitative characteristics" in QE03 screen, just an icon appears in the "results" coulmn in RR screen. (Code & Code Texts missing)
Why is this so?? When I go back & see in QE01, I can see the Qual Values.
Require some pointers to address this issue.
Thank you a lot in advance
Regards,
PradeepHello,
You may need to check QE13 to view the qualitative results for the inspection point.
Regards,
John -
Availability of Standard Physical Sample Report
QPR3 Tcode provides Physical Sample details for only one Inspection Lot at a time
Instead I need below details
Input Data :
Material From To
Batch From To
Plant From To
Inspection Lot From To
Physical Sample Number From To
Sample-Drawing Number From To
Sample Category From To
System status From To (Internal Status of Physical-Sample Record)
Physical Sample Release Date From To
QM mat. auth. From To
Creation Date of Physic Sample From To
Output :
1) Material No
2) Material name
3) Batch
4) Inspection Lot
5) Physical Sample No
6) Plant
7) Sample Category
8) Status (Internal Status of Physical-Sample Record)
9) Vendor ( No & Name )
10) Manufacturer ( No & Name )
12) Drawing number
13) Created by
14) Creation Date of Physical Sample
15) Released By
16) Physical Sample Release Date
17) Time of Physical Sample Release
18) Sample Quantity
19) Unit of Measure for Physical Sample Size
20) Sample-Drawing Procedure
21) QM mat. auth.
22) Insp. Lot Qty
23) SampleSize
24) No. Containers
25) Lot Cntnr.
26) Group
27) Group Counter
28) System Status ( Inspection Lot )
Is there any provision for accessing same above details via SAP Standard Report
Kunal ShethGet Solved
-
How to manage physical sample in SAP?
Hi,
How to manage physical sample in SAP?
Regards
Ashish JainHi
Physical sample is to keep the sample of a product till its shelf life expiry date. E.g. In case of any shelf life applicable product, the inspected sample will be retained till its expiry date. If any customer complaints are received, on inspecting the complaint, result may be compared with the existing physical sample.
In SAP, Material master should have inspection type 15.
To create physical sample, sample drawing procedure has to be created and attached to the header of inspection plan. With this set up when the lot is created, physical sample will also be created. Result recording should be done for physical sample. Physical sample storage information has to be updated through transaction code QPR2
Regards
Nikhilesh Ray -
Is there any Bapi for Physical Sample creation
Hi Folks,
Is there any Bapi for physical sample creation. My scenario is like this I have the data in the table (material, plant, batch, type,vendor, vendorbatch ). For each material i have to create a physical sample......
Any ideas or suggestions would be appreciated..
thanks
chaithanya.HI Chaitanya,
You can use : BAPI_BATCH_CREATE
it has import paramaters like Material, Plant , batch , Batch Attributes ( Vendor No, Vendor Batch etc)... I guess this is what you are looking for.
Regards,
-Venkat. -
Mass release of Physical Samples
Hi Gurus,
Is there any T code for Mass release of Physical samples. We are in cutover and for around 1000 Open inspection lots, we need to release the physical Samples. It will be labourious to release every sample using QPR4.
Tried LSMW, SHDB but the release is not getting recorded. Is there any other way for releasing physical samples in mass?
Thanks in Advance.
regards,
senthilDear,
Please check in QPV2. There is one check box. this is determine the automatic sample determine.
check box is Confirmation req. Please remove this check box.
-Sandip
Edited by: Sandipsinh Shaktavat on Mar 6, 2012 12:15 AM -
Dear SAP Experts,
I have created inspection lot for a material with movement type 101 against a Purchase order in developmet client. I have attached inspection plan to it. In inspection plan sampling procedure & sample drawing procedure are used. According to it Sample calculation is also done. Now the inspection lot is in released status. When I go for result recording system does not allow me for result recording. When I investigate, I observe that the physical samples (both primary & pooled) are in CRTD status. They are not in result status thats why system does not allow the result recording. Please note that I have not used any user status which may prohibit release of physical samples.
I think, after releasing the lot, physical samples must automatically have release status. Is my assumption correct?
If not how the physical samples can have release status automatically?
Kindly help in this regard. Your valuable help is appriciated.
Regards
VivekDear,
Please check in QPV2. There is one check box. this is determine the automatic sample determine.
check box is Confirmation req. Please remove this check box.
-Sandip
Edited by: Sandipsinh Shaktavat on Mar 6, 2012 12:15 AM -
Inspection type 01 and physical samples
Dears
I have scenario like this
My raw material is avtivated inspection type 01 and 15 (For physical sample)
as GR done inspection lost was created of 01 type and it was workin fine
now when ever vendor delivery a new item with a slight changes for existing material (So material number will not change)
So as GR done inspection lot was created, But for this inspection lot i need system treat as a physical sample (normaly creating by using QPR1)
to achive this what are the things i need to do
Pls tell me the details step with process
Pls give your in put
hope my question was cleared
Thanks
Faisalsir,
actually i am try to do something for sample approval process
my scenario is
when ever vendor deliver any sample we need to recored it and keep a database with all inspection details
some times vendor will deliver the sample in po with zero value
so can you pls tell me how i can map this scenario
Faisal -
Hi,
how is the physical sample handled in QM-IDI ?
In 'QAIMV' there is a field called 'PHYSPROBE' with a length of 6,
but in transaction QPR4 the field Physical Sample' is longer than 6.
How are these field related ?
Best regards
Jenshi prasad
i think you have not maintained the container while making the Good receipt.kindly check once again,
for detailed process kinldy refer the following link where the entire procedure has been done
http://help.sap.com/saphelp_46c/helpdata/en/fe/67f9979d6f11d189b60000e829fbbd/frameset.htm
regards
thyagarajan -
Error during Usage Decision - Not All Physical Samples are valuated
Hi,
I am using Sampling Procedure as follows:
Sampling Type : Fixed Sample
Valuation Mode : Attributive Inspection nonconf. Units
Inspection Points : Sample Management
I have assigned the Inspection Point as 200 and Sample Drawing Procdure in Inspection Plan Header.
I have recorded and closed results for 3 samples. During Usage decision the following message shows:
Not all physical samples are valuated! Do you want to force inspection completion?
This means that Valuation of Inspection points have not updated. I request your help to solve this problem.
Thanks & Regards
V.DevarajHi
Check the inspection plan, check for all the operation, by double clicking on operation you enter the opertioa details screnn, pls scrol down, you should have a field called VALUATION, select the option "automatic valuation option" .
try this
navin -
QM Physical Sample Numbers to xMII
I am trying to get the Physical Sample numbers for an Inspection Lot out of SAP and into xMII for additional barcode label processing. I can see the information I need in the SAP R/3 client but am unable to get it to xMII.
I am using the JCO interface and using BAPI_INSPLOT_GETLIST to get the inspection lot # for a Production Order and have tried passing that into BAPI_INSPLOT_GETDETAILS, BAPI_INSPOPER_GETLIST and BAPI_INSPOPER_GETDETAIL but none of them seem to have access to the physical sample records. Can anyone help me with a RFC, BAPI or user Exit that I can use to get this data?I have tried using BAPI_INSPCHAR_GETRESULT but I can only get information if the results for that char have ben posted. I am trying to get the physical sample numbers to send to a barcode label application so we can track the samples thru the testing machine. The requirements are for multiple lables in different sizes so we are not printing these labels from SAP.
For each inspection lot\physical sample drawing, we generate 30 physical samples. (1 master, 2 pooled, 27 retention) I need to get these numbers out of SAP to print them.
If I run transaction QA3 from the client and select Samples (Physical Samples (Shift + F2)) from the menu, I can see the list I want before any results have been entered. -
Hi all,
Does anyone know how to extract QM Physical Sample information? Did anyone face this problem before? Do I have to set up a new custom extractor based on QPRS table or is there any standard way to do that?
Regards,
ModroHello Modro,
See this link [Archiving Sample Records (QM-IM-SM)|http://help.sap.com/saphelp_nw04/helpdata/en/6f/370e405c538f5ce10000000a155106/content.htm]
Thanks
Chandran -
Result Recording without release of physical sample
Hi,
SAP Gurus,
I have one query regarding result recording for some lots.
I have created one sample drawing procedure and assigned to inspection plan.
In SDP I have maintained primary size factor 1, Fixed number 1, Acc.to smplng scheme-PM, Insp. severity-4.
In pooled sample size factor 1, Fixed number 1.
At header level Consider No. of Containers Tick, Confirmation Required Tick, Used in Task List Tick.
I have done One GR for raw material and assigned that inspection plan to the created 01 origin 01through QA02.
One primary and pooled sample is created in CRTD status. I have not release the sample.
When I go to QE11 for result recording system assigns the physical sample by default and branch me direatly to the result recording screen.
My query is that, i have acivated confirmation required tick in SDP then system should not accept the sample which is in created status and should not allow me to do result recording. But system is skiping this and allowing me to do Result recording.
Please let me know what necessary settings i have forgot.
Thanks in advance,
HarrieshDear Shyamal,
The scenario i mapped is that, I need to release the sample manually. User should not go for RR without sample release.
It is working fine also. But for few lots it is not asking the sample release. It ir skiping the sample status stage and directly going to RR.
Please let me know way system is behaveing like this for few lots only.
Thanks and regards.
Harriesh.
Maybe you are looking for
-
Cannot create new Events in specific Dates???
I am having a problem creating a new event for a specific date, November 4th. What I did: I duplicated an event that took place in October 30th and dragged it to the desired date, in Monthly View, but iCal doesn't let me drop it in the day I want. Th
-
[Solved] Adding Printer Marks to a Pages document in Acrobat
By "Printer Marks" I mean "bleeds" and "crop marks". A bleed is the area of the paper that will be trimmed off after the job is printed. Crop marks indicate the exact place where the paper is to be trimmed. Background: I normally do programming and w
-
I cant sign in Youtube on my Apple TV
I can't sign in in YouTube on my Apple TV please help me!!
-
Hi gurus, I want to know the name of the job that is used to transfer the currency values from R/3 to BW. From my understanding, this is the job that updates the TCURR table in BW. Any help is highly appreciated Thanks
-
Maching Chart on jsp page by retriving the data from database
Hi. I want to draw bar, pi etc chart on the web page by getting the values from database oracle while implementing in jsp. kindly tell me how i can do this. Please write down the detailed code for it. Thankx.