Physical to Virtual Copy of 11i EBS and 10gR2 DB instances for Upgrade Test

We recently completed a P2V copy of our 11.5.10.2 EBS instance and its corresponding database. We then ran the adcfgclone.pl script on each tier to rename the SID and basically create a new instance. When I navigate to the newly assigned web address to access this environment for testing, I can get to http://host.domain:port, click on Apps Logon Links, then E-business Home Page. Once I click that, I'm redirected to the original (Physical) instance's site. Any idea how I can resolve this issue?
Please let me know if you need additional information.
Thanks!
Kristopher

I've checked all that you mentioned in your post, and everything refers to my new host.domain:port. I haven't made any changes at the OS level regarding this new VM. Are there any OS-level changes that need to be made to point to this new host? I've already run the txkrun.pl script as follows:
txkrun.pl -script=SetAdvCfg -appsuser=<appsuser> -appspass=<appspass> -enable=HTTPLoadBal
and answered the prompts to reflect the new host and domain.
Thanks!
Kristopher

Similar Messages

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost?

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.

virenkhare wrote:
I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.
There are no keys, there is no trial version of OSX (ML or Mavericks) and Mavericks is free
What have you downloaded, and where did you get it

Three Physical Samples withdraw from inspection lot 04 and then result record for all three

Dear Gurus,
We have 3 quality labs and each lab is sent a separate samples to inspect certain characteristics once we receive material from production. I have created an inspection plan and mapped these three labs as work center in operation and then assigned MICs under each operation to inspect.
Now my issue is how to map separate 3 samples to inspection lot generated from production ( type-4) and also how to configure that to inspection plan.
I have to result record for all these three physical sample as withdrawn from Lot based upon inspection plan as mentioned above.
I can mention sample drawing procedure in inspection plan but how to map actual sample there.
Any help will be greatly appreciated.
Regards,
Satish

Hi Satish
You are creating three operation for depicting three testing Labs.
Against each lab (operation) you had assigned MICs as per your requirement.
Now you have to assign a SDP along with inspection point type 200 for physical sample in task list.
After prod confirmation system will create inspection lot along with a sample by default for 1st operation.
For other operations you have to create samples manually referring the same inspection lot (QPR6).Remember to click ' Create Insp points' and mention operation.
Release the samples in QPR4.
Now when you go for result recording system would ask first for operation, so select the operation , then system will ask for insp point (sample no).There click on assign insp point , so system will provide the Sample no which were created in QPR6 for that particular operation.
Please follow the steps and revert.
Regards
D Mohanty

Admin username and password not recognized for upgrade

I'm trying to upgrade a user account on my computer to Yosemite. This is that not the admin account. My admin username and password are rejected. It is also rejected when I try to do something such as change the power settings. If I'm doing this within my admin account the same username and password work just fine. I have no idea how to fix this.

One more follow up question. I logged back into my admin account to upgrade to Yosemite. The software was already downloaded in the user account using the apple ID and PW associated with that account, which is different than the apple ID associated with the admin account.
Within my admin account, on the first page of the app store app it shows OSX Yosemite as 'downloaded' and nothing happens when I click that button.
The only other option is to click 'learn more' under the OSX Yosemite image. From that page it asks me to sign in to the App store to download Yosemite. The Apple ID box already contains the other Apple ID (not the one I want to use), and there is no option to change that. All I can do is enter that password.
I'd like to complete this with my Apple ID but I don't know how to change it.

Flex Charting 2 and the best solution for upgrade

Hi!
I worked with FlexBuilder 2 trial a few months ago (last
months I worked with "WIN extension serial"). On June 10, 2007 I
decided to aquire Flex Charting 2 and buy it on Adobe Web Site for
$337.59 and I decided to wait for flexbuilder 3 until the end of
the year. But now, Adobe anounced future plans for the Flex
Charting 2 which will be "eliminated" and incorporated in the
Flexbuilder 3 Professional edition at 2008.
Buying FlexBuilder 2 after 1 November ($249) and paying an
upgrade for FlexBuilder 3 Standard ($99), in the future, can I work
with FB3 standard and my serial of Flex Charting 2? or must I buy
Flex Builder 2 ($249) and after then buy Flex Builder 3
Professional Upgrade ($299).
Sorry my english
Thanks
Flex man

Hi!
I worked with FlexBuilder 2 trial a few months ago (last
months I worked with "WIN extension serial"). On June 10, 2007 I
decided to aquire Flex Charting 2 and buy it on Adobe Web Site for
$337.59 and I decided to wait for flexbuilder 3 until the end of
the year. But now, Adobe anounced future plans for the Flex
Charting 2 which will be "eliminated" and incorporated in the
Flexbuilder 3 Professional edition at 2008.
Buying FlexBuilder 2 after 1 November ($249) and paying an
upgrade for FlexBuilder 3 Standard ($99), in the future, can I work
with FB3 standard and my serial of Flex Charting 2? or must I buy
Flex Builder 2 ($249) and after then buy Flex Builder 3
Professional Upgrade ($299).
Sorry my english
Thanks
Flex man

Dreamweaver and Contribute set-up for local, testing, and VSS (CS4)

I'm trying to figure out the best configuration for my site.
I want to work locally on files, test them on a dev server while
still using VSS for versioning. With all this the site needs to
have Contribute enabled.
My thoughts are:
1. Define the local as my machine.
2. Define the testing as the dev server.
3. Define the remote as VSS.
I'm a little confused with the Put/Get and Checkin/Checkout
functionality as well. Any suggestions?
Thanks,
Victor

Site Name: PHP Test Site
Local Site Folder: C:\xampp\htdocs\php_test\
Server Name: Local Testing
Connect Using: Local/Network
Server Folder: C:\xampp\htdocs\php_test
Default Images Folder: C:\xampp\htdocs\php_test\Images\
Web URL: http://localhost/php_test/Server Model: PHP MySQL
Is that everything you need to know? Note that I do not have a remote testing site set up yet.

Missing Complete My Album and iTunes Plus Check For Upgraded Songs.

Anyone else experiencing this combination?
Anyone else have a clue what is going on with the iTunes store? I see a lot of problems on the message board. I wanted to complete a couple of albums today and was hoping to do so. Apparently the recording industry does not want my money.
Any help would be appreciated. I uninstalled then reinstalled itunes to no avail.

I'm having similar issues when trying to upgrade my library to iTunes plus tracks. I get the following error:
'The item you tried to buy is no longer available.
The availability of the item changed while you were using the store. The same item may be available with a different price or elsewhere on the store.'
What am I doing wrong?
Are we experiencing similar issues to that described in this older post?.....
http://discussions.apple.com/thread.jspa?threadID=978789

Elite e9150t - upgrading coolingfan/heatsink and power supply (suggestions for upgrade?)

Hey guys,
I don't know why I didn't come here first, but here I am.
Basically, I have the HP elite e9150t model. Great computer... I've already upgraded a few things, but I am looking to do another little upgrade and would love to get some input. It's also Windows 8.1 Pro.
Alright, I've upgraded the ram to two 8gb kingston chips. I've also upgraded the video card to a GeForce 660 GTX. Now I am looking to upgrade my power supply and cooling unit. I've been running into problems where my computer will start to overheat when playing games. I can render out things easily enough with 3D software like Maya, but games make the system chug. That's why I've decided to upgrade the cooling unit and figured I should do the same for my power supply as well since it still has the 460w unit. I'd love to get this ugpraded to the point that I can play games with high settings and not worry about my computer dying on me from heat related injuries. I'm not looking to play games like Watch Dogs at the highest setting. I'd LOVE to have that, but I doubt I could squeeze that out right now. I would, however, love to play a game like Wildstar on their ultra setting (which I feel should be doable with my system).
Also, I am pretty much ignorant when it comes to computer hardware. When I say this, I am not exaggerating. I really have no idea what I am doing when it comes to this part of computers. Here are the two items that were suggested to me. Keep in mind, that I am on a budget right now (starting a new job next week after graduating this past week), so this is about what I can afford (this ~price range). I've also added a fan to the side panel of the computer (well I didn't, but the guy I bought it from did).
First is the power supply:
XFX TS Series P1550SXXB9 550W ATX12V 2.2 & ESP12V 2.91 SLI Ready CrossFire Ready 80 PLUS Bronze Certified Active PFC Power Supply
http://www.newegg.com/Product/Product.aspx?Item=N82E16817207013
550 Watt for ~$25 after rebate. Can't beat that and the people that recommended it were saying that it's made by a great company (SeaSonic?)
And the cooling unit:
Cooler Master Hyper T4 - CPU Cooler with 4 Direct Contact Heatpipes
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103182&cm_re=Cooler_Master_Hyper_T4-_-35-10...
It was actually suggested I get the TX3, but I saw that the TX3 does not support LGA 1336 that the HP has.
1) Case size: I've tried googling what type of case I have because it seems like that is the jelly to any peanut butter question on power supplies and/or cooling units. Will my suggested items fit in the case I have? It looks like a tight fit in there, so I don't know how well they'll fit.
2) Are the recommended items good: Again, I don't know anything about this stuff and am going purely off recommendations. Are these the items that I do need?
3) Another thing bugging me about the video card: Not exactly on topic, but I have the GeForce card in there right now and it's huge. I also have a sound card, but the way the PCI slots are setup, I have to put the sound card directly over the GeForce card (and the Geforce card has a fan on top of it blowing up). This has the heat blowing directly to the sound card. I don't know if this is what I want to do? I read somewhere that I want the video card closest to the heatsink? Could I reverse the order and have the sound card below the video card and still get away with it? It's a nice sound card and it's being wasted right now (not even in the computer).
Alright, thanks guys. I know I wrote a **bleep** essay here, but I wanted to be detailed as possible. Thanks again for those that stuck through the whole thing lol...

Hi,
I suggest that you do some measuring from the top of the processor to bottom of the removable side panel. You need this measurement to determine if your chosen heat sink cooling will fit.
When you install the new power supply then install it fan up pointing to top so that is draws cool air into the power supply from the top side air intake vents. Measure your existing power supply and look for a high efficiency model with a large fan that will fit in your PC. If you can find a PSU with a 140 mm fan that will fit then go for it.
Additional cooling ideas: PCI slot cooling fan and vented PCI slot covers.
Your particular PC probably has a single width graphics just link my e9280t (same cabinet and mobo).
BTW--the truckee mobo is not spec'd for 8 GB dimms.
You have made lots of changes already to your PC so saying that you know very little appears to be underestimating your own ablities.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Active dataguard with 11i EBS

We have client presentation for Active data guard with 11i EBS, is this certified with 11i EBS...?
Please let me know some more information.

Hi,
Yes its certificated, please check below thread for notes-steps etc.
Data Guard setup with 11i apps
Dataguard for EBS db
Dataguard for EBS db
Implement Standby Instance for EBS
Implement Standby Instance for EBS
Also see:
Business Continuity for Oracle E-Business Release 11i Using Oracle 11g Physical Standby Database - Single Instance and Oracle RAC [ID 1068913.1]
Regard
Helios

11i EBS XML Publisher Report with Multiple Data Source

I need to create XML Publisher report in 11i EBS pulling data from another 10.7 EBS Instance as well as 11i EBS in single report.
I am not allowed to create extract or use db links.
My problem is how to create Data Source Connection using Java Concurrent Program.
The approach I am trying is
1. create Java concurrent program to establish connection to 10.7 instance.
2. Will write the SQL queries in Data Tempalete with 2 Data Source 1 for 11i EBS and 2 for 10.7 EBS
3. Template will show the data from both query in 1 report..
Is there any other way to proceed using datasource API...
thanks

option1:
The query should be same @ detail level, only the template has to be different for summary and details.
@runtime, user can choose to see the detail/summary
Disadvantage, if the data is huge,
advantage , only one report.
option2:
create two separate reports summary and details
and create diff data and diff layout and keep it as different report
Advantage, query will perform based on the user run report, summary/detail, so that you can write efficient query.
Dis advantage , two reports query/template to be maintained.

Is there a simple way to drag new virtual copy to a collection?

I've searched multiple times for a hint on how to do this, but always come up empty, perhaps I'm not searching correctly; apologies if this is obvious, well known or asked all the time:
In Windows Lightroom (3.5 at the moment), if I select one or more images and then, on the left, right click and create a new collection, I'm given the option of creating new virtual copies of the selected images for inclusion in the new collection. I use this all the time.
However, once the collection is created, I've not found a simple, one-step method to add virtual copies of additional images to that collection. Best I've come up with is the three step process: create a virtual copy, drag the virtual copy to the collection, and then remove the virtual copy from the folder/collection where I created it. It would be far cooler if there was, say, a keyboard shortcut, e.g. alt-click-drag or something, that would do this all in one step. Is there such a method?
Thanks.

You can right click on the collection and make it a target collection. Then each time you create a virtual copy simply hit the B key to add it. No need to drag.
Remember to switch your target when finished by right-clicking Quick Collection.

Virtual Copy & Collections

Hello,
i have organized my pictures in collections. When i create a virtual copy of a picture and drag it to the collection the picture-count of the collection is increased by 1 but the virtual copy wont show up in the collection.
- Is there a way to create a virtual copy of a picture an assign it to an colletion?
- Is there a way to filter / search for virtual copys?
Thank you
elessar

You have to assign it to a collection at the time of creation while it is selected post creation (whether one or a group).
AFAIK there is no filter for VCs at the moment. A work around would be to assign all VCs a color (assuming you won't want that color for other uses) and filter on that color.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Comparison Between Oracle eBS and JD Edwards

Hi All,
Is there any site / document / any kind of referference / help on comparison between Oracle-eBS and JD Edwards mainly for Finance and SCM module please ? Need this urgently so any help is appreciated.
Thanks & Regards,
Subhra Saha

Hi,
Any kind of help plz.
Regards,
Subhra

Crane Aerospace and electronics is looking for Test Engineers with LabVIEW experience - please disregard previous post.

Here is the correct post:
Are you detail-oriented, creative, and technically skilled at Engineering design and development? Come to Crane Aerospace & Electronics and use your excellent Engineering skills to design, improve, and deliver the next generation of products in the aerospace and electronics Industry!
We have a unique and exciting career opportunity for Engineer II, Test.
You will be responsible for maximizing new product development and manufacturing performance through the creation and deployment of test strategies, tools, and plans. Design and implement high performance hardware and software for test equipment. Authoring test procedures and performing Qualification test activities. Ensure high product quality.
Responsibilities:
Collaborate with customers and multi-disciplined engineers to establish/clarify test, qualification, verification and validation requirements.
Write test plans, procedures, requirements and reports in a highly structured environment.
Analyze, develop and deploy complex and high performance test hardware and software solutions for automated test equipment.
Design, develop, debug, validate & verify the fabrication of manual and automated test equipment at the circuit board and system level, and specify and procure COTS test equipment.
Develop/maintain hardware documentation including block diagrams, schematics, BOMs, wiring diagrams and wiring lists, software documentation, and configuration control of initial release and updates.
Perform detailed calculations to establish test equipment specifications and design margins.
Maintain existing test systems through bug fixes, improvements and modifications.
Support the estimation of costs and schedules to develop or upgrade test platforms.
To perform a number of the above responsibilities with limited supervision.
Minimum Requirements:
Experience: 2-5 years. Previous work experience in aerospace, space or medical electronics industry preferred.
Knowledge: Microprocessor / Microcontroller hardware and firmware design; Analog Circuit and power supply design; Digital Circuit Design including high-speed serial communication design; Firmware programming in c; Schematic Capture, PADS Logic preferred; Circuit Simulation; Fundamentals of magnetic proximity, temperature, and pressure sensing electronics; ESD; Familiarity with testing standards (MIL-810, MIL-704, and DO-160 preferred). Basic laboratory test equipment; LabVIEW experience, certification preferred; Developing hardware per DO-254 and software per DO-178 preferred; Experience with Adobe FrameMaker, IBM Rational tools, TestStand, Microsoft Project preferred.
Skills: Good interpersonal and communication skills (verbal and written)- effectively lead and/or participate in multifunctional teams in a dynamic work environment. Ability to manage multiple tasks, flexibility to switch between tasks and prioritize tasks.
Education/Certification: Bachelors Degree in electrical engineering, computer science, physics or related technical discipline.
Eligibility Requirement: Must be a US Person (under ITAR rules) to be eligible.
Working Conditions:
Working conditions are normal for an office/manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to safety glasses, heel straps, and shop coats.
Requires lifting 25 lbs
Apply online today: http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3170
Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Visit our website at CraneAE.com for more information on our company, benefits and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. FAA sensitive positions require employees to participate in a random drug test pool.

How can you say you are hiring test engineers with LabVIEW, yet the job description doesn't even mention LabVIEW. All I see in there is CAD design.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

I am running Windows 7 Enterprise. I want to upgrade to a newer version of itunes. I click on help then click on check for upgrades. When I try to upgrade/install the upgrade for itunes it loads 52MB of the required 56MB and then just freezes ?

I am running Windows 7 Enterprise.
I need to upgrade my version of Itunes from version 7 to version 10 or 11.
I go to Help and click on Search for Upgrades.
I then select Upgrade Itunes.
The system starts to upgrade and download the new software.
It gets to 52.60 MB of 56 MB and then it just freezes / sticks and does not go any further ?
I have tried to upgrade on a number of occasions but the same thing happens each time.
Any help please ?

Answer is in the original post.

Physical to Virtual Copy of 11i EBS and 10gR2 DB instances for Upgrade Test

Similar Messages

Maybe you are looking for