PI 2.0 - How to run a report on Clients for an SSID
I'm trying to run a report to find out the client count and information (MAC, Username, etc..) per SSID in a set location over a set period of time.
Example:
SSID: IPVOICE
Location: Main Office, All Floors
Time Period: Last 2 weeks
I want Client MAC, username, AP used, Map Location, Date/time
I have found the "Client Sessions" report, and this provides all of the data I want except it gives me the same client over and over for every session in the time frame.
Is there a similar report that only shows the client information once if it accessed the network in that timeframe?
Thank you
Hi
You can run " Unique Client Detail" report & you can get what you want
Reports > Report Launch Pad > Client > Unique Clients > Unique Clients Report Details
Here is a snapshot of that in PI report, you can choose whatever field you want to include in the report
Similar Messages
-
How to run GR55 reports in background for cost center hierarchies
1. I have been asked by our users to create batch jobs to run in the background for some GR55 reports, that can then be sent directly to cost center managers via email.
I have figured out the process to do this as long as the cost center manager only needs to see a single cost center at a time. However, if they are in charge of multiple cost centers, we also want to send them a summarized report using the hierarchy we have set up. I can't seem to make this work, as the job only seem to recognize the last cost center in the group and the report is for that cost center.
Example. cost centers 100, 200 and 300 belong to hierarchy abc. If I run the job just for cost center 100 it is fine. But if I have a variant to run hierarchy abc, or even if I use the range 100 to 300, all I get is a report for cost center 300.
We cannot use BW because we only have revenue in BW. I am being asked to make this work from standard R/3 within the GR55 realm of reporting.
2. In addition, the report selection criteria includes two separate plan/forecast versions. They need to update these each month prior to running the reports and sending them out. I looked at the variables associated with the versions and tried to set them up with default values that I hoped would update automatically so that they don't have to manually change 50 or so variants each month. But I don't see any dynamic variables that I can use to have the system make that change without going into each variant individually.
3. There is another piece to this equation as well. There is another report they want sent out in batch, but it is several pages wide in SAP and several pages long. So when you run it in batch and either spool it or get it sent as an email, it is very ugly in the formatting due to all the page splits horizontally and vertically. If anyone knows how to get the report to stay together like it would if you had excel integration turned on, it would be very helpful. I have tried running it with that integration turned on, but the jobs are set up with user batch_mgr and not my id, so it isn't working well. The batch_mgr id is just a system id, not a dialog id. We also don't want the jobs set up with a regular user id because if people leave, then the jobs all need to be changed.Kim,
I may have options for issues 1 and 2. In case of 3, what I can tell you is I understand the concern, but this is what typically happens in some standard CO reports that are not ALV compatible, I don't think there is not much there to do unless you add some custom code for the output.
In regards to point 1, yes, I have noticed that this happens in some standard and custom reporting, not sure what is going on. I came up with a work around that made the trick for my client in a similar scenario; which is editing the cost center groups. For instance, instead of having the group set as a range from 100 to 300, the groups are have listed the cost centers, 100, 200 and 300. Obviously, the disadvantage of this option is that it would require a bit of more cost center group maintenance.
In regards to point 2, I understand from your note that your users already have set up selection variants for the report. One option for you is to get the help from a developer to create a custom period variable and tiny program that runs in batch every month that would update that variable accordingly. Once that's done, you may have to update at least once, the selection variant attributes to change the period to a selection variable, so everytime from that point of time forward that the variable gets updated, it will be ready with the right value for every selection variant that uses it.
Hope this helps.
GG -
How to run ADDM report from client?
Hi,
I want to run ADDM report from the client and get the report in my machine?/
in other words while connecting to sqlplus from my machine if i invoke @?/rdbms/admin/ >> it selects local oracle home..
Any suggestion to set as if run the remote sql's from sqlplus?/
Thanks,
RamanYou can run the individual built-in packages from SQL*Plus from a client.
You can also open a browser session to the OEM Grid Server if you know its fully qualified host name or IP Address on your network.
Be sure, however, that you are licensed to do so. ADDM requires the diagnostic pack license. -
How to run a report from oracle 10g form in .csv format
dear all,
how to run a report from oracle 10g form in .csv format? i've already run in pdf & excel format.
i'm using
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'PDF'); --for pdf
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'SPREADSHEET'); ---for excel
Please Help..i have already tried.
but the report show in htm or html format. that file will not save into csv. please help. -
How to run a report in form 10g
How to run a report in form 10g;
RUN_REPORT_OBJECT - check the on line help and there is a great paper on otn.oracle.com/products/forms and click on 9i papers (it will be relevant for 10g as well)>
Regards
Grant Ronald
Forms Product Management -
How to run the report and show the output in excel file
salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u allHi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks. -
How to Run a Report automatically in Background for every night
Hi,
How to run a report program in Background automatically for every nigh.
Thanks
RameshHi Ramesh,
You can use SM36 and use the "Job Wizard" to define a background job in simple step by step procedure
Or
Goto SM37 and specify a job name.
Next specify the ABAP Program Name of the report you want to execute under Job Step.
Then click on "Extended Job Selection" and goto the Period Tab.
There select "Only Periodic Jobs" and then specify the frequency of execution based on Months, Weeks, Days, Hours or Minutes.
Hope this helps,
Regards,
Madhur
Message was edited by: Madhur Chopra -
How to run a report in back ground
how to run a report in background with out using job open, submit , close is there any other function module to run report in background.
Hi,
There are two ways for you to handle,
one manually setting up the job through SM36 which is better and convinient,
secondly through program using FM's JOB_OPEN, SUBMIT, JOB_CLOSE.
Find below steps in doing both:
Procedure 1:
1. Goto Trans -> SM36
2. Define a job with the program and variant if any
3. Click on start condition in application tool bar
4. In the pop-up window, click on Date/Time
5. Below you can see a check box "Periodic Job"
6. Next click on Period Values
7. Select "Other Period"
8. Now give '15' for Minutes
9. Save the job
Procedure 2 via Program:
Below is a sample code for the same. Note the ZTEMP2 is the program i am scheduling with 15mins frequency.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
L_RELEASE(1) TYPE c.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = 'ZTEMP2'
IMPORTING
JOBCOUNT = P_JOBCNT
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SUBMIT ZTEMP2 VIA JOB 'ZTEMP2' NUMBER P_JOBCNT
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
WITH DESTINATION = 'HPMISPRT'
WITH IMMEDIATELY = SPACE
WITH KEEP_IN_SPOOL = 'X' AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = P_JOBCNT
JOBNAME = 'ZTEMP2'
STRTIMMED = 'X'
PRDMINS = 15
IMPORTING
JOB_WAS_RELEASED = L_RELEASE
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Hope the above helps you.
<b>Reward points</b>
REGARDS -
hi sap gurus
can anybody tell me about how to run a report in sap (ABAP). what is the TCode for that one.while i am trying to post asset master it is asking to start a report first and then post. kindly reply me soon
thanx in advanceHi,
- normal ABAP reports are executed by a TCode or SE38
- reports relating to assets are located at SPRO-Info Systems-Accounting-Fixed Assets
Rgds. -
How to run the report RM07CUFA?
How to run the report RM07CUFA?
Go to SE38 and enter RM07CUFA and click execute.
in the next screen enter details for
Movement Type
Special Stock Indicator
Company Code
G/L Account
and execute.
If you have any inconsistency with fields that will be shown with red colour.. -
How to run OBIEE Reports in Multi-Org Environment?
How to run OBIEE Reports in Multi-Org Environment of EBS.
hi Rainer,
My Forms and Reports Server is in Same System only. Actually i am giving this path
http://vagee.ail/reports/rwservlet?
server=rep_vagee_oracle10g_apps_server&report=D:\FP2
\dealer_reports\oc_dealer.rep&userid=fp2/fp2erp@info
&destype=cache&desformat=pdf&ODSNO=OC0809/00110&branch=DLR002
In My AS System Running Successfully. But Client systems Page cannot be display message is displaying.
but generally i m able to access the reports server using this path
http://vagee.ail/reports/rwservlet?
then Reports server page is displaying but
when i specify that report server name
http://vagee.ail/reports/rwservlet?server=rep_vagee_oracle10g_apps_server
page cannot be displayed.
what will be the problem. please help me. thank you.
Regards,
Kalyan. -
How can run the report SAP_INFOCUBE_DESIGN?
hI gURUS
To know about the DIM Table size
How can run the report SAP_INFOCUBE_DESIGN?
Thanks
Cheers
DuraiFunction (se37):
RSDEW_INFOCUBE_DESIGNS
Try to see/run this function in order
to get statistic about one InfoCube
How to determine the size of DIM?
From this Function u can determine
how many rows in DIM u have.
After this u can determine size of DIM table:
ROWS * (How many Bytes are in one row) = Size of table.
In order to determine how many Bytes are in one row,
u can see transaction se11 -> Database table -> Tabkle name of DIM -> Display -> Fields -> just add the length*Bytes for all fields in this table.
BR -
How to run a sample Jolt client
Can any one explain me how to run a sample jolt client.
Iam trying to run the following jolt client code ToUpper.java at the command prompt but I am getting the following error.I am getting the same error when i run the Jrepository Applet RE.html.
D:\ToUpper>javac ToUpper.java
D:\ToUpper>java ToUpper
bea.jolt.SessionException: Cannot connect to any //localhost:3050.
Reason:NwHdlr: Network Error: chkauth: J_CHECKAUTH FAILED
at bea.jolt.JoltSessionAttributes.getDomainInfoJoltSessionAttributes.java:584)
at bea.jolt.JoltSessionAttributes.checkAuthenticationLevel(JoltSessionAttributes.java:507)
at ToUpper.main(ToUpper.java:20).
I have the tlistener running and provided apppassword and userpassword as my System login password where I have the complete Tuxedo Installation(server and client). Please see the attached sample jolt client program I am trying to run. I am not sure what configuration Settings I need to do.
ToUpper.java
/* Copyright 1996 BEA Systems, Inc. All Rights Reserved */
import bea.jolt.*;
public class ToUpper
public static void main (String[] args)
JoltSession session;
JoltSessionAttributes sattr;
JoltRemoteService toupper;
JoltTransaction trans;
String userName=null;
String userPassword=null;
String appPassword=null;
String userRole="myapp";
String outstr;
try{
sattr = new JoltSessionAttributes();
sattr.setString(sattr.APPADDRESS, "//GVC3ZA03TESTING:3050");
switch (sattr.checkAuthenticationLevel())
case JoltSessionAttributes.NOAUTH:
break;
case JoltSessionAttributes.APPASSWORD:
appPassword = "123456"//"appPassword";
break;
case JoltSessionAttributes.USRPASSWORD:
userName = "myname";
userPassword = "123456";
appPassword = "123456";
break;
sattr.setInt(sattr.IDLETIMEOUT, 300);
session = new JoltSession(sattr, userName, userRole,
userPassword, appPassword);
toupper = new JoltRemoteService ("TOUPPER", session);
toupper.setString("STRING", "hello world");
toupper.call(null);
outstr = toupper.getStringDef("STRING", null);
if (outstr != null)
System.out.println(outstr);
session.endSession();
System.exit(0);
}catch(Exception e){
e.printStackTrace();
} // end main
} // end ToUpperHi Todd,
I am not getting the jcheckauthentication error now as i changed the port no. to the port where JSL is running.Now I am getting this error.Also find the ULOG contents pasted below.
D:\bea\tuxedo9.1\samples\jolt\ToUpper>java ToUpper
Authentication Level set To :0
Exception caught error no is:6
bea.jolt.ServiceException: TPENOENT - no entry found
at bea.jolt.JoltRemoteService.decodeCALL(JoltRemoteService.java:460)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:345)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:267)
at ToUpper.main(ToUpper.java:39)
I have checked the jrepository file and also the Applet window for the service defination(TOUPPER)but still its not recognizing the service.Is there some configuration thing I have missed out before running JOLT client.
ULOG File Contents
132947.GVC3ZA03TESTING!JSH.4000.2464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
132956.GVC3ZA03TESTING!WSL.432.5308.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
132956.GVC3ZA03TESTING!WSL.432.5308.0: WSNAT_CAT:1197: INFO: Exiting system
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
132956.GVC3ZA03TESTING!JSH.4000.2464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1197: "INFO: Exiting system"
132956.GVC3ZA03TESTING!DMADM.5844.5348.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
132959.GVC3ZA03TESTING!BBL.3216.4372.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
133021.GVC3ZA03TESTING!tmloadcf.6104.3164.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
133021.GVC3ZA03TESTING!tmloadcf.6104.3164.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
133028.GVC3ZA03TESTING!BBL.6140.5124.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
133028.GVC3ZA03TESTING!BBL.6140.5124.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
133028.GVC3ZA03TESTING!JSL.5608.6088.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133028.GVC3ZA03TESTING!JSL.5608.6088.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!JSL.5608.6088.0: INFO: JOLT Listener version-BEA Jolt 9.1
133028.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
133028.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: INFO: JOLT Handler version-BEA Jolt 9.1
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: LIBTUX_CAT:262: INFO: Standard main starting
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: Current version: BEA Jolt 9.1
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
133029.GVC3ZA03TESTING!WSL.3292.4892.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSL.3292.4892.0: LIBTUX_CAT:262: INFO: Standard main starting
133029.GVC3ZA03TESTING!WSH.2568.3772.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSH.2568.3772.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
133029.GVC3ZA03TESTING!WSH.5764.3836.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSH.5764.3836.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
133242.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
133300.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
133300.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
133359.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
133456.GVC3ZA03TESTING!JSH.6028.5748.-2: Fldid32(ACCOUNT_ID) failed for INQUIRY: LIBFML_CAT:8: ERROR: Unknown field name. Maybe FIELDTBLS32 is not set properly.
133612.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
143325.GVC3ZA03TESTING!JSH.6028.5748.-2: Fldid(SAMOUNT) failed for DEPOSIT: LIBFML_CAT:11: ERROR: Cannot find or open field table. Maybe FIELDTBLS is not set properly.
144116.GVC3ZA03TESTING!WSL.3292.4892.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
144116.GVC3ZA03TESTING!WSL.3292.4892.0: WSNAT_CAT:1197: INFO: Exiting system
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
144116.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1197: "INFO: Exiting system"
144116.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
144119.GVC3ZA03TESTING!BBL.6140.5124.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
144142.GVC3ZA03TESTING!tmloadcf.2668.3316.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144142.GVC3ZA03TESTING!tmloadcf.2668.3316.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
144148.GVC3ZA03TESTING!BBL.4144.4376.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
144148.GVC3ZA03TESTING!BBL.4144.4376.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
144148.GVC3ZA03TESTING!JSL.5072.2444.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JSL.5072.2444.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!JSL.5072.2444.0: INFO: JOLT Listener version-BEA Jolt 9.1
144148.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
144148.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: INFO: JOLT Handler version-BEA Jolt 9.1
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: Current version: BEA Jolt 9.1
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
144148.GVC3ZA03TESTING!WSL.3040.5488.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSL.3040.5488.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!WSH.5740.2764.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSH.5740.2764.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144148.GVC3ZA03TESTING!WSH.1784.5448.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSH.1784.5448.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144157.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144207.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
144226.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144229.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144518.GVC3ZA03TESTING!WSL.3040.5488.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
144518.GVC3ZA03TESTING!WSL.3040.5488.0: WSNAT_CAT:1197: INFO: Exiting system
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
144518.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1197: "INFO: Exiting system"
144519.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
144522.GVC3ZA03TESTING!BBL.4144.4376.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
144537.GVC3ZA03TESTING!tmloadcf.4892.4980.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144537.GVC3ZA03TESTING!tmloadcf.4892.4980.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
144543.GVC3ZA03TESTING!BBL.5440.4548.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
144543.GVC3ZA03TESTING!BBL.5440.4548.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
144543.GVC3ZA03TESTING!JSL.1796.5232.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JSL.1796.5232.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!JSL.1796.5232.0: INFO: JOLT Listener version-BEA Jolt 9.1
144543.GVC3ZA03TESTING!JSL.1796.5232.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
144543.GVC3ZA03TESTING!JSL.1796.5232.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: INFO: JOLT Handler version-BEA Jolt 9.1
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: Current version: BEA Jolt 9.1
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
144543.GVC3ZA03TESTING!WSL.2596.4404.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSL.2596.4404.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!WSH.3508.5136.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSH.3508.5136.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144543.GVC3ZA03TESTING!WSH.4288.5676.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSH.4288.5676.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144548.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144634.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
144734.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6" -
How to run the Transaction Code - BIC for Bank keys uploading
Hi
How to run the Transaction Code - BIC for Bank keys uploading.
please give me suggestion.
Thanks
InduGo to BIC transaction screen
Fill the selection screen parameters as below
1. Update Run (Test Run: Check Off: Real Run:Check On)
2. Set Deletion Flag (Check On)
3. Maximum no. of records: 999999
4. Detail List (Check On)
5. Display variant: 1SAP
6. Presentation server (Select Radio Button)
7. Application server (Deselcet Radio button)
8. File name and Path: Select relavant file which is to be upload
9. Bank country: If needed (Give respective country name)
10. Select execute button or F8
NOTE: Make sure that before executing run execute TEST RUN by deselecting Update Run check box
Hope this will meet your requirement
Thanks. -
How to Run a Report for Blanket PO that have been OVER Invoiced (over limit
Hi All,
How do I run a report in ME2N, where I would want to see all the Blanket POs (Framework Orders) that has a "Actual Value" (the amt invoiced so far) which is Greater than the Overall Limit (specified in the "Limits" tab)?
Are there any fields in the Dynamic Selection in ME2N? I coudn't Find any......How can I compare two fields in the Blanket PO, for example "Overal Limit' > "Actual Value"?? How to put this selection criteria in ME2N
Edited by: Duke Dukester on Sep 17, 2008 10:31 AMYou will not get this information via ME2N but you can get via ME2S
once you execute the ME2S you will see the PO lines and if oyu double click on it than you will get the all information you are looking but the exact query directly not possible with ME2S
The best way is write the query using table ESUH and EKPO
joint EKPO to ESUH and do the query based on your requirements.
you can get the package number from EKPO and based on the package number you can retrive the data form ESUH table
Maybe you are looking for
-
Anyone got one to work with Leopard yet?
Posted this Rant at the end of another Topic, slightly OT so reposting here (with some additions): I wish I could report that iTunes 7.6 broke my apple tv, because that would mean it had been working up until very recently. Sadly however, it hasn't b
-
How do I set up my exchange account to mail
i HAVE THIS ACCOUNT FROM MY UNIVERSITY AND THEY USE OUTLOOK UNFORTUNALY HOW DO i ADD this tye of account [email protected] to my mail if i DON'T KNOW the mail server, incoming or outgoing mail servers can you try to help me please thanks
-
Need to show vendor name on vendor contact workbench
Hello experts , We have a requirement where I need - On the vendor workbench page, clearly show which company they are listed under. Is there any way to do this ? I guess this can be done with the help of token embedding into localized resource . An
-
Error code -2009 while trying to share an mp-4 from Imovie with itunes. Has anyone encountered this before? It says that imovie cannot prepare the file for sharing because this error occurred.
-
HI FRNDS I NEED BAPI CODE FOR SCHEDULE LINES AND PURCHASE REQISITION. PLZZ FRNDS ITS URGENT. WITH REGARDS, SANJAY