PI 2.0 Manager Report for Alarm Assignments and Acknowledgements

Is there a Prime Infrastructure 2.0 manager report that shows daily alarms, who the alarms were assigned to and when they were acknowledged? I can't find anything on the tool or in the documentation and this is required to prove compliance in the financial industry.
Thanks

There is no PI 2.0 release yet.
LMS 4.2 can do this. Reference.
I am curious - can you cite the compliance regulation that requires this feature?

Similar Messages

Error opening a Manage Report template with Formulas and Summation

Hi Expert,
My j2ee web application is setup is such a way that when there is NO connectivity to the Crystal Report Server XI, it will use the Crystal Report for Eclipse functionality and opening report templates located in the relative path - This works fine.
But when there is a connectivity to the CMS Server, I have this error when opening a manage report in Crystal Report Server XI that contains formulas and summations. But for other reports like chart and listings no problem.
This code triggers the error:
ReportClientDocument clientDoc = reportAppFactory.openDocument(infoObject,0, java.util.Locale.US);
I found out there's a conflict between CR libraries for Eclipse and libraries for RAS Enterprise Server XI.
How can I solve this issue so that I can support the two scenarios - with or without CMS connectivity, I can still view reports.
Error Stack Trace:
com.crystaldecisions.sdk.occa.managedreports.ras.internal.a: Cannot open report document. - Unable to connect to the server: gdcextrp.RAS.rptappserver. cause:com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: gdcextrp.RAS.rptappserver.-- Error code:-2147467259 Error code name:failed detail:Cannot open report document. - Unable to connect to the server: gdcextrp.RAS.rptappserver. The exception originally thrown was com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: gdcextrp.RAS.rptappserver.-- Error code:-2147467259 Error code name:failed at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
Hoping for your answers.
Regards,
Rulix Batistil

You must isolate the CR4E and RAS SDK jars using separate classloaders - simplest is have separate apps, if rolling your own class loaders is out of project scope.
They do not work together.
Sincerely,
Ted Ueda

Report for daily production and daily sales quantities

Can you Please any body let me know what fields and tables should I pick to generate a report for sales qty and production qty for a material on daily basis. we are using PP PI

Hi,
You can use table MSEG for that purpose. Try BUDAT-MKPF as one of the selection parameters and use
MBLNR-MKPF = MBLNR-MSEG
MJHAR-MKPF = MJHAR-MSEG
Sort the results in ERFMG-MSEG and ERFME-MSEG using
BWART-MSEG = 101 minus 102 (for production)
SOBKS-MSEG = E
BWART-MSEG = 601 minus 602 (for sales).
Above stuff might be useful to you for your development requirement provided you are having Sales Order specific production.
Thanks & Regards,
Abu Arbab A

Report for Asset number and its Purahcse order number

Hello Friends,
Please give me details of report for Asset number and its Purchase order number .
Regards
Nilesh Vakil

hi,
GO to ME2N...
use SHIFT + F4..
there check for the acc. assign cata. field and input the asset and execute..
Regards
Priyanka.P

Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas?

Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas? Thanks for any assist!

Hi Ken,
Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
I am looking at a product called wmobile, but may be problematic on my current system.
thanks for any help...

Standard report for cheq incomming and chq ougoing.

Dear All,
urgent one please.
Is any standard report for cheque incomming and cheque ougoing with document wise.
if so pls suggest me.
awaiting your valuable suggestions.
Thanks & Regards,
satishkumar.m

Hi,
my doubt is in.tr.code fb02 and after putting doc type bp(bank payables) after executing that i will get screen showing details ie., doc no., year, type do.date and posting date.
my client wants outgoing cheq details ie., to who we have issued the cheques with cheque no, date, and bank.
if we go to drilldown report of fb03 we r getting but each and every entry they cant go and drilldown it..
we cheked in fchn but that requirement wont suit to my client..
can any one suggest me.
thanks & regards,
satishkumar.m

Drill Down reports for Profit Centers and Segments

Hello Experts
I would like to down load the "Drill down reports for profit center and segments". I have found standard SAP documentation through (http://help.sap.com/erp2005_ehp_05/helpdata/EN/46/f6fc4e7a7569b5e10000000a114a6b/frameset.htm ).
As per the given guidelines, i have beening trying to down load from client 000, the spool request is showing finished (with out any error and in one / two seconds) .. but the reports are appearining in SAP Easy Acess.
I have checked with Basis team, whethere i have restrictions with my userid. Even with Basis id also, we are being unable to activate these reports.
Does it required any configuration / licence issues before i need to lookinto before download?
Kindly revert
Regards
Anil Kumar

Hello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar

Where can i activate a delivery report for my sms and mms?

where can i activate a delivery report for my sms and mms?
I dont seem to find it on my Iphone 5.
Its unacceptable!
Also a sound for missed calls seems to be missing to !!!
Unacceptable!
Can somebody help me please?
[email protected]

Unbelieveble and unacceptable.
Every simple phone has a delivery report....
Big dissapointment
Iphone never again.
thanks anyway

Standard report for Reconciliation report for Asset Accounting and GL

is ther any standard report for Reconciliation report for Asset Accounting and GL

hi
functional specification r reqired for this issue
regards
venkataswamy

BPM for error handling and acknowledgements

Hi,
Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
Please send me the link if you have other wise give me the solution on the same.
Thanks,
Nagesh

Hi !
Just check out these links This might help you.
Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
To know about Ack-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
The following link has entire configuration of Receiver XI Adapter (including acknowledgements)
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
 eror handling in BPM.

1. CCMS monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
2. BPM Monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks !!!
Regards
Abhishek Agrahari
Questions are welcome here!!
Also mark helpful answers by rewarding points

SAP Time management reports for Ukraine

Hi All,
can anybody send me the list of Time management reports available for ukraine.
i have checked in other sites also, i am getting only standard reports, but i am not getting reports for ukraine. i have given ukraine country grouping also.
regards
Vani

Hai..
Personal Work Schedules (Report RPTPSH10)
Daily Work Schedules (Report RPTDSH20)
Attendance
Attendance/Absence Data: Overview (Report RPTABS20)
Attendance/Absence Data: Calendar View (Report RPTABS50)
Attendance/Absence Data: Multiple Employee View (Report RPTABS60
Attendance Check (Report RPTEAB00)
Attendances/Absences Overview Graphic (Report RPTLEA40)
Absence
Attendance/Absence Data: Overview (Report RPTABS20)
Attendance/Absence Data: Calendar View (Report RPTABS50)
Attendance/Absence Data: Multiple Employee View (Report RPTABS60
Attendances/Absences Overview Graphic (Report RPTLEA40)
Time Accounts
Time Leveling (Report RPTCMP00)
The Time Statement (Report RPTEDT00)
Cumulated Time Evaluation Results: Time Balances and Time Wage T
Time Accounts (Report RPTDOW00)
Displaying Absence Quota Information (Report RPTQTA10)
Displaying Time Evaluation Messages (Report RPTERL00)

Configuring Enterprise Manager Reporting for Web

Hi,
I have successfully configured OEM reporting for web. But while accessing reports, its gives me the following error. See if you can help me:
Error Message:
No OMS location specified for the Servlet to connect to. Make sure that reporting has been successfully configured for this webserver.
Regards,
Aqueel.

Was having the same problem. I even gave up many times. But was finally able to solve this issue. I reconfigured the websever using oemctl configure rws, startup the apache service of the host, stopped and started the OMS and the the reporting was good.
Good luck
Schekina

Report for Qty Contract and Value Contract with PO release exceeding limits

Hi All,
Is there a std report in SAP that the users can use to view Qty and Val Contracts that has exceed in Qty (in case of Qty Contracts) or Val (in case of Val Contracts) ?
Thanks in advance!

hi Duke,
If thinking logically, then there is no report for the same..this may be because you enter the qty or value limits in the contract doc itself....So, when you make the PO for the same, and if the qty or value exceeds the system automatically provides the message..stating that the qty or value has exceeded....
So, there is no report for the same...
Hope it helps...
Regards
Priyanka.P

Report for open order and shipped qty summary

Dear Folks,
           Can any one please help me.
Report for open order summary Vs shipped quantity
what are the related programs to it.
throw some light on it.

>
arpita b wrote:
> Dear rohit
>
>     Iam asking about any report which compares or give details of open order vs shipped qty.
>
> Any sis report is available for this?
Hi Arpita,
There is no such sis report available. You will have to configure and create two seperate reports and do the comparison.
If you want, I will send you the list of all T.codes used to generate reports in SD.
Revert back to me if you need the same.
Regards,
Swapna D.

Report for Req Material and Issue Material for Project/WBS

Dear All,
My client need a report for a WBS element-wise material required and material issue with value.
Let me know if any standard report avialble for same??
Or Incase of devlopment which are the tables we can use to Get req qty and issue qty of materials?
Thanks and Regards,
Atul R. Rajmane

Dear Shirkant,
Thanks for your input. I am using CN52N report.
I this I have selected Req Qty, Qty Received, Qty Withdrawn, Shortfall Qty. I am getting figures in Req Qty, Qty Withdrawn, Shortfall Qty but I am not able to get Qty Received figure. Let me know how I can get it i.e. for this any Note is required or any other configuration??
If I can get this figure than I can use this report for requirement.
Thanks and Regards,
Atul R. Rajmane

PI 2.0 Manager Report for Alarm Assignments and Acknowledgements

Similar Messages

Maybe you are looking for