PI 7.0 ABAP Proxy Wrong Namespace after Client copy

Hello,
i am looking for an PI expert because we have some problems with a standard ABAP proxy interface.
We use the FSCM Module and we send Credit Commitment Notification from a SAP ECC 6.0 to PI 7.0.
We use the Interface CreditCommitmentNotification_Out and it works fine on the Development System (D46). But on the integration system (Q46) it doesn't work. The Q46 is build up from our production system (P46) by a system/client copy.
We get the error:
The payload include a wrong namespace for the proxy interface.
wrong: xmlns:prx="urn:sap.com:proxy:P46:/1SAI/TAS7DF374ECCA722B654BFE:700:2007/10/04"
correct: xmlns:prx="urn:sap.com:proxy:Q46:/1SAI/TAS7DF374ECCA722B654BFE:700:2007/10/04"
I dont know why we get the wrong namespace. I check the transaction SICF, SPROXY and SXMB_ADM and compare it with the customizing on our development system. I didnt find any gap.
Please help me if you have some ideas what is wrong on our system.
Regards
Jürgen 8-))

Hi,
We experience the same problem after an upgrade from ECC 5.0 to 6.0
How did you solve this?
Ron

Similar Messages

Unable to find product categories after client copy

Hi all,
We have copied clients from an existing ones for both SRM and ECC. After client copy we have followed standard procedure after client copy i.e.
Run transcation BDLS
created new RFC connections
changed attributes using the Attributes replace report
created new distributon model
maintained CRM parameters
maintained new site attributes in SMOEAC transaction
maintained entries in table TWPURLSVR
however , when i try to create a shopping cart, I cannot see any product category. The extended attributes for product category point to new ECC client becuse we have run the attributes replace report.
however in the product category table , COMM_CATEGORY , the product categories listed are all for the old ECC client
When i tried to load the Object DNL_CUST_PROD1 using transaction R3AS in SRM and tried to pull from new ECC client , it is in runing status for a long time and new categories with new ECC backend reference are not being replicated in the SRM.
Can you tell me why this could be happening ? How can i get the product categories from new ECC backend into my client?
Regards,
Mangesh

problem solved
i was using wrong parameters in BDLS

AFAB: Runtime Error after client copy.

Hi all,
I'm having a problem with the transaction code AFAB (post client copy). After client copy from PRD to DEV, I'm encountering this runtime error "SAPSQL_ARRAY_INSERT_DUPREC - The ABAP/4 Open SQL array insert results in duplicate database records." whenever I tried to perform AFAB. Test run was executed successfully but I cannot complete the actual background processing.
I have try with other asset (in the same client) and encounter the same problem. Likewise, I have successfully completed the depre. if I try the same and other asset (in a different client on the same server).
I've check the number range in FBN1 and have verified that the range is correct.
Any advice as to how I can solve this problem?
Thank you.
Regards.
p/s: if there is duplication, how do I find where the duplication is located and how do I remove this duplication?
p/s 2: the standard SQL that is having this problem is "INSERT COBK FROM TABLE COBK_INS."
Edited by: Sek Yao Ooi on Aug 5, 2010 5:21 AM

Solution obtain from snote-83731 ; thanks to SAP-Marketplace's support.
Issue solved.

SAP* not authorized after Client copy

Dear All,
Here's the scenario:
1. Created a new logical system for a new Quality client 230.
2. Created the new client 220
3. scheduled a test remote client copy from the new client, source Production. (Successful)
4. Scheduled the actual client copy to run last night.
5. Today morning, I'm logging into the new client with SAP*, it prompted me to change password.
6. I want to look for the client copy logs (SCC3), but getting "not authorized"
7. Checked all other transactions, all giving "not authorized" error
Any help would be appreciated. Thanks in advance.

Dear Reza,
Better to go for Client Export Import process . This is what SAP reccomends for coping clients between
different systems ( Like from Production to Quality ) as the remote client copy has many
disadvantages..
For this 1 ) you should get the downtime of production system and do the client export process .
SCC8 . See the logs at scc3 .
2) Copy the datafile and cofile to the Source system
3) Import it usting stms_import .
Monitor the logs as the logs will be grown massive and make sure enough space is there.
4) After client copy , go for post processing ( scc7 ) .
Hope you are clear and feel free to get back if any doubts.
Regards,
Nibu

TCURM in target client empty after Client Copy

Hi Experts,
Has anyone encountered situation whereby TCURM does not contain a record for the target client after Client Copy process is completed? Is this a feature or bug?
Regards

Hi , I user the exclude tables option to exclude some tables.
but I have another problem: the client copy still failed. I get these informations:
table/object   component                         error
ANLU           FI-AA-AA                   Field missing locally
C905            SD-MD-CM                Different Field Names
IMPTT          PM-EQM-SF-MPC      Field missing locally
how can i finish my client copy ?   can you give me the solution
thanks very much

Change Myself system in RSA1 trx after client copy

Hi,
I have installed SCM 2007 system.
As post-processing step i have configured myself system in RSA1 trx in the 001 client.
Now, i want to perform client copy and use that new client 100 as Prod client. What are the steps required to change myself system to point to the new client?
Please help.
Regards,
Chintan

HI,
As logical systems are used to define you can use BDLS to convert them after client copy.
Go through :Note 325470,325525.
Thanks.

BI-RFC problems after client copy

Hi all
Client copy was done and after that when I tried to load data in BW, it ran for long time and finally showed cancelled in SM37. When I checked the source system in RSA1, it gave two messages.
1.Incorrect IDoc type ZSAC008 in the ALE definition of the source system RSAR373
2.Result of the destination check: Password logon no longer possible - too many failed attempts RSAR375.
In long text of message 1 suggestion was to enter IDoc type ZSAB003. In SM30 for Message Type RSSEND Basic Type ZSAB003 Release field is empty. Is this error because of this? After client copy is there a way to restore the settings back to how it was set initially in the development server? Basis told ALEREMOTE & BIWREMOTE are not blocked. What is missing here? Thanks a lot in advance.
Subin

There are a few things need to be performed on basis side after copy .
1. Restore of Logical system.--> check with Baisis team wheather they have performed this action or not after copy.
2. Check your source system connection, in rs1-- source sytem --check
3. Change the aleremote or Bwremote passwords.
4. Try to logon to your sourcesystem ( from SM59 Tcode) Remote logon.
Hope this helps.
Regards,
Reddy
Edited by: Reddybl on Apr 1, 2010 11:56 AM

After Client copy - No Authroization Issue

Dear All,
Good Day,
We copied Production data to Quality system through Transport management System. We checked those data copied successfully. After client copy, login in Quality also done successfully
But unable to run any transaction. no authroization error occur for all the transaction for all the user id.
"You are not authorized to use transaction XXXX"
Kindly advice me to resolved this issue.
Best Regards,
KSK

Was security transported down? Can you log into the system as SAP*? If so, check to make sure that all the roles and user masters where copied. You can also run st01 to do an authorization check.

Background jobs pointing to old client after client copy

Hello
We have recently completed system refresh from PROD system to TEST system.
We have created new client in new TEST system. Background jobs are copied properly from old client to new client.
But all these jobs are pointing to old client only. We have deleted old client.
Hence all these jobs get cancelled.
How shall I change the client of all the jobs from old to new one.
-Nandu More

Please check the thread:
Error in Background Jobs After Client Copy
Check some of the TBT* tables.

Replicating Product groups after client copy WRONG

Hi Folks,
I've taken a client copy from client 100 to 050 in both SRM SD1CLNT100 and ECC ED1CLNT100.
I've done BDLS to replace log. sys. in both systems for both SRM and ECC log sys. eg. ED1CLNT100 to 050 and SD1CLNT100 to 050.
After replication of config and product groups I'm stuck with the product groups replicateded in CLNT100.
I get the root node after replication of product groups in the new 050 client but all the product groups are not copied!
Any ideas to what I'm doing wrong?
Thanks in advance,
Thomas

HI Thomas
Can you pls go through following replies ---
1 how to delete Product Category ?
2 Re: Updating Product Categories
3 Deletion of Product master on Production Client
Run transaction BDLS to convert logical system from old ID to new logical system ID. The logical system ID now would be PR3CLNT700
regards,
Nimish Sheth

Regarding ABAP Proxy : on a different client on XI Box

Experts,
I was referring to this thread
Has anyone generated server proxy on XI box??
where Michal has answered saying it is possible to have ABAP Proxies in XI box if its a separate client.
Does anyone have experience of doing this, what are the setup steps ?

Hey
yeah its possible if you have two clients of XI server,one client can act as ABAP proxy client and the other one can be the XI server .
please have a look at the following blog
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Thanx
Aamir

Wrong datasources on DEV after client copy

Hi all,
a customer just made a cliente copy from PRD to DEV and now all data sources on DEV are pointing to PRD
and it says that source system doesn't exist.
1) What was the right way to do the copy so the datasources are still pointing to R/3 DEV (or QAS) after the client copy?.
2) Is there any easy way to correct the situation without creating all transformations again ?
Thanks in advance
JP

Hi,
Ok.
Then you can do same changes at bw dev server.
You need to change table - RSLOGSYSMAP entries. it may have ECC prod name.
Remove ecc prod server name, enter ecc dev server name and save it.
Or ask basis team to maintain ecc dev server and bw dev server technical names entries at table RSLOGSYSMAP at bw server.
You can maintain from below option as well.
BW dev server t code - RSA1, Menu Tools--> Conversion of logical system names. on next screen you can change and save entries.
Source - maintain ecc dev technical name
Target - BW Dev server technical name
Thanks

Unable to create IDOCs after client copy

I'm unable to create IDOCs after a client copy. I receive a SAPSQL_ARRAY_INSERT_DUPREC or insert of duplicate rows ABAP dump.
Does anyone know what how to fix this. Thank you in advance.
Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
Date and Time          22.10.2007 16:50:51
ShrtText
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEDI1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"F09_IDOC_INSERT_WITH_NUMBER" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLEDI1" or "LEDI1F09"
"F09_IDOC_INSERT_WITH_NUMBER"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"F09_IDOC_INSERT_WITH_NUMBER"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "auaplxr3q"
Network address.......... "128.197.135.5"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "000B439ED600"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "auaplxr3q"
Database type............ "ORACLE"
Database name............ "Q63"
Database owner........... "SAPR3"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Mar 22 2007 20:48:46"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "175"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 4189928
Heap..................... 0
Page..................... 0
MM Used.................. 1469352
MM Free.................. 2718056
SAP Release.............. "640"
User and Transaction
Information on where terminated
The termination occurred in the ABAP program "SAPLEDI1" in
"F09_IDOC_INSERT_WITH_NUMBER".
The main program was "SAPMSSY1 ".
The termination occurred in line 108 of the source code of the (Include)
program "LEDI1F09"
of the source code of program "LEDI1F09" (when calling the editor 1080).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "F09_IDOC_INSERT_WITH_NUMBER" "(FORM)" but was not handled locally,
not declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLEDI1 ". Its source code starts in line 5
of the (Include) program "LEDI1F09 ".
Source Code Extract
Line
SourceCde
78
perform call_badi tables list_container_insert
79
using control
80
ident.
81
Aufruf des Badi's für das einstreuen neuer Segmente
82
perform call_insert_badi tables list_container_insert
83
using control
84
ident
85
changing maxsegnum.
86
87
   free list_container_insert
88
FREE_RETURN = 1.
89
ELSE. " no other IDoc is open in create-mode
90
LOOP AT LIST_CONTAINER_CREATE WHERE MANDT EQ SY-MANDT
91
AND   DOCNUM EQ IDENT.
92
LIST_CONTAINER_CREATE-DOCNUM = DOCNUM.
93
MODIFY LIST_CONTAINER_CREATE.
94
ADD 1 TO MAXSEGNUM.
95
ENDLOOP.
96
if control-mestyp eq c_mestyp.
97
CALL FUNCTION 'FUNCTION_EXISTS'
98
EXPORTING
99
funcname           = c_func
100
EXCEPTIONS
101
FUNCTION_NOT_EXIST = 1.
102
IF syst-subrc IS INITIAL. "Anwendungssystem
103
perform call_transform
104
tables list_container_create
105
using control.
106
ENDIF.
107
endif.
>>>>>
INSERT EDID4 FROM TABLE LIST_CONTAINER_CREATE.
109
Aufruf des Badi's für das Anwendungsmapping einzelner Felder
110
perform call_badi tables list_container_create
111
using control
112
ident.
113
perform call_insert_badi tables list_container_create
114
using control
115
ident
116
changing maxsegnum.
117
118
free list_container_create
119
FREE_RETURN = 0.
120
ENDIF.
121
122
insert status records
123
124
SYN_ERROR_IN = ' '.
125
CNTR_STATUS = 0.
126
REFRESH LIST_STATUS.
127
CLEAR LIST_STATUS.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
13 FORM         SAPLEDI1                            LEDI1F09                              108
F09_IDOC_INSERT_WITH_NUMBER
12 FUNCTION     SAPLEDI1                            LEDI1U19                               33
EDI_DOCUMENT_CLOSE_CREATE_TAB
11 FUNCTION     SAPLEDIR                            LEDIRU01                              273
IDOC_INBOUND_WRITE_TO_DB
10 FORM         SAPLEDIN                            LEDINF01                              457
ONE_IDOC_STORE
9 FUNCTION     SAPLEDIN                            LEDINU05                              234
IDOC_INBOUND_ASYNCHRONOUS
8 FORM         SAPLEDIN                            LEDINV05                               19
IDOC_INBOUND_ASYNCHRONOUS
7 FORM         SAPMSSY1                            SAPMSSY1                              254
XAB_RUN_DRIVER
6 FUNCTION     SAPLSXAB                            LSXABU01                                9
RFC_RUN_XAB_DRIVER
5 FUNCTION     SAPLERFC                            LERFCU01                               59
ARFC_EXECUTE
4 FUNCTION     SAPLERFC                            LERFCU02                              229
ARFC_DEST_SHIP
3 FORM         SAPLERFC                            LERFCV02                               28
ARFC_DEST_SHIP
2 FORM         SAPMSSY1                            SAPMSSY1                               69
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
%_RFC_START
Chosen variables
Name
Val.
No.      13 Ty.          FORM
Name F09_IDOC_INSERT_WITH_NUMBER
CONTROL-MESTYP
USERCLONE
554544444222222222222222222222
53523CFE5000000000000000000000
C_MESTYP
FIDCCH
444444222222222222222222222222
694338000000000000000000000000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
LIST_STATUS-STAPA2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
C_FUNC
IDOC_TRANSFORM
444455544544542222222222222222
94F3F421E36F2D0000000000000000
SYST-REPID
SAPLEDI1
5454444322222222222222222222222222222222
310C549100000000000000000000000000000000
SY-UNAME
Q63CLNT140
533444533322
1633CE414000
%_DUMMY$$
2222
0000
SY-MSGV1
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SYST-SUBRC
0
0000
0000
ALE_IDOC_TO_APL_OK
62
33
62
LIST_CONTAINER_CREATE[]
Table IT_20[9x1068]
FUNCTION-POOL=EDI1DATA=LIST_CONTAINER_CREATE[]
Table reference: 14
TABH+ 0(20) = 070000008036F5B8000000000000000000000000
TABH+ 20(20) = 0000000E00000014000000090000042CFFFFFFFF
TABH+ 40(16) = 0400002300000CA0000824C401000000
store        = 0x070000008036F5B8
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 14    (0x0000000E)
label        = 20    (0x00000014)
fill         = 9     (0x00000009)
leng         = 1068 (0x0000042C)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000048
occu         = 8     (0x00000008)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x070000008036F610
pghook       = 0x07000000802D86D0
idxPtr       = 0x0000000000000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x00000010)
lineAlloc    = 16    (0x00000010)
store_id     = 23    (0x00000017)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
LIST_CONTAINER_CREATE
1400000000000511747000000009E1BPADRML                     00000002#èXD63        070TST_QA140_1
3333333333333333333333333333434544544222222222222222222222333333330E54332222222233355555433353
14000000000005117470000000095120142DC0000000000000000000000000000238846300000000070434F11140F1
CONTROL
1400000000000511747640 64        2SAPQ63    LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
G_MAXSYNERR
1
0000
0001
<%_TABLE_EDID4>
ALE_DISPATCH_ERROR
27
33
27
ALE_IDOC_READY_FOR_APL
64
33
64
%_SPACE
2
0
IDENT
0000000000000001
3333333333333333
0000000000000001
ALE_IDOC_TO_APL_ERROR
63
33
63
No.      12 Ty.          FUNCTION
Name EDI_DOCUMENT_CLOSE_CREATE_TAB
IDENTIFIER
0000000000000001
3333333333333333
0000000000000001
NO_DEQUEUE
X
5
8
SYN_ACTIVE
Y
5
9
IDOC_CONTROL
1400000000000511747640 64        2SAPQ63    LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
SYNTAX_RETURN
0
0000
0000
INT_EDIDD[]
Table IT_10[9x1062]
FUNCTION-POOL=EDINDATA=G_T_DATA_RECORDS[]
Table reference: 9
TABH+ 0(20) = 0700000080284B80070000008028530800000000
TABH+ 20(20) = 000000090000000A0000000900000426FFFFFFFF
TABH+ 40(16) = 0400000900000AA8000824C401000000
store        = 0x0700000080284B80
ext1         = 0x0700000080285308
shmId        = 0     (0x00000000)
id           = 9     (0x00000009)
label        = 10    (0x0000000A)
fill         = 9     (0x00000009)
leng         = 1062 (0x00000426)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000039
occu         = 8     (0x00000008)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x0700000080320D90
pghook       = 0x07000000802E1508
idxPtr       = 0x0000000000000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x00000010)
lineAlloc    = 16    (0x00000010)
store_id     = 17    (0x00000011)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x0000000000000000
hsdir        = 0x0000000000000000
ext2         = 0x07000000802852A8
>>>>> 2nd level extension part <<<<<
tabhBack     = 0x0700000080284B30
delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x0000000000000000
pb_handle    = 0x0000000000000000
NO_IGNORE
2
0
EDI_IDOC_SYNTAX_ERROR_IN
60
33
60
DOCNUM
0000000000511747
3333333333333333
0000000000511747
EXCLUSIVE
E
4
5
SYNCHRONOUS
S
5
3
APL_TESTIDOC_CHECK_OK
55
33
55
FREE_RETURN
0
0000
0000
INT_EDIDD
1400000000000000001000009E1BPADRML                  00000000##XD63        070TST_QA140_17 X00
3333333333333333333333333434544544222222222222222222333333330054332222222233355555433353322533
14000000000000000010000095120142DC0000000000000000000000000000846300000000070434F11140F1700800
SUB_INT_ACK_POSITIVE
14
33
14
G_INSERT_OK
2
0
LIST_CONTAINER_INSERT_TMP[]
Table[initial]
LIST_CONTAINER_INSERT_TMP
0000000000000000000000000                              00000000##
2223333333333333333333333333222222222222222222222222222222333333330022222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No.      11 Ty.          FUNCTION
Name IDOC_INBOUND_WRITE_TO_DB
PI_DO_HANDLE_ERROR
X
5
8
PI_NO_DEQUEUE
X
5
8
PI_RETURN_DATA_FLAG
X
5
8
PI_RFC_MULTI_CP
0000
3333
0000
PI_STATUS_MESSAGE
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PE_IDOC_NUMBER
0000000000000001
3333333333333333
0000000000000001
PE_INBOUND_PROCESS_DATA
140BAPI                                                  6
3334454222222222222222222222222222222222222222222222222223222222222222222222222222222222222222
1402109000000000000000000000000000000000000000000000000006000000000000000000000000000000000000
PE_STATE_OF_PROCESSING
0
0000
0000
T_DATA_RECORDS[]
Table IT_10[9x1062]
T_LINKED_OBJECTS[]
Table IT_11[0x100]
FUNCTION-POOL=EDINFORM=ONE_IDOC_STOREDATA=LT_LINKED_OBJECTS[]
Table reference: 10
TABH+ 0(20) = 000000000000000007000000802853F000000000
TABH+ 20(20) = 0000000A0000000B0000000000000064FFFFFFFF
TABH+ 40(16) = 0400000900002BB00010249401000000
store        = 0x0000000000000000
ext1         = 0x07000000802853F0
shmId        = 0     (0x00000000)
id           = 10    (0x0000000A)
label        = 11    (0x0000000B)
fill         = 0     (0x00000000)
leng         = 100   (0x00000064)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000190
occu         = 16    (0x00000010)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
store_id     = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = 0x0000000000000000
hsdir        = 0x0000000000000000
ext2         = 0x0700000080285390
>>>>> 2nd level extension part <<<<<
tabhBack     = 0x0700000080285340
delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x0000000000000000
pb_handle    = 0x0000000000000000
PC_CONTROL_RECORD
1400000000000000000    30        2          LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
L_STATUS
64
33
64
L_ALE_SUCCESS_MESSAGE
B1                  S005                                                  No filters
4322222222222222222253332222222222222222222222222222222222222222222222222246266676772222222222
21000000000000000000300500000000000000000000000000000000000000000000000000EF069C45230000000000
ST_PREVIOUS_PARTNER_DATA-SYNCHK
X
5
8
C_TRUE
X
5
8
SYST-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
C_ELEMENT_UNPROCESSED_IDOCS
Unprocessed_IDocs
56776667766544667222222222222222
5E02F353354F94F33000000000000000
ST_PREVIOUS_STATE_OF_PROCE
0
0000
0000
ST_INBOUND_PROCESS_DATA-EDIVR2
6
3
6
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
L_SYN_ACTIVE
Y
5
9
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
L_SYNTAX_RETURN
0
0000
0000
%_DUMMY$$
2222
0000
SY-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
No.      10 Ty.          FORM
Name ONE_IDOC_STORE
IDOC_NUMBER_IN
0000000000000000
3333333333333333
0000000000000000
STATE_OF_PROCESSING_IN
0
0000
0000
INBOUND_PROCESS_DATA_IN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS[]
Table[initial]
G_LAST_IDOC_NUMBER
0000000000000000
3333333333333333
0000000000000000
SYST-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
CURRENT_CONTROL_RECORD_IN-DOCNUM
0000000000000000
3333333333333333
0000000000000000
CONV_ERROR
2
0
C_TRUE
X
5
8
SY
0000000000000000000000000000000000000000000000000000000000000000000000000000000200000000000000
0002000000010009000000000000000000000000000100000001000000010000000000000000004C00000000000000
STATUS_MESSAGE_IN
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_IDOC_SELECT_AND_WRITE_TO_DB
5
3
5
SY-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
STATUS_MESSAGE_IN-STAMID
22222222222222222222
00000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
STATUS_MESSAGE_IN-STAMNO
000
333
000
RET_FLAG
X
5
8
G_RFC_CODEPAGE
0000
3333
0000
RSJOBINFO-JOBSUBRC
0
0000
0000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
SY-LANGU
E
4
5
G_T_DATA_RECORDS[]
Table IT_10[9x1062]
LT_LINKED_OBJECTS[]
Table IT_11[0x100]
CURRENT_CONTROL_RECORD_IN
1400000000000000000    30        2          LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
SWO_%OBJID
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No.       9 Ty.          FUNCTION
Name IDOC_INBOUND_ASYNCHRONOUS
IDOC_CONTROL_REC_40[]
Table IT_3[1x524]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_CONTROL_REC_40[]
Table reference: 3
TABH+ 0(20) = 07000000802D876007000000802D449000000000
TABH+ 20(20) = 0000000300000003000000010000020C000000E0
TABH+ 40(16) = 0400000900001FE0000A249001000000
store        = 0x07000000802D8760
ext1         = 0x07000000802D4490
shmId        = 0     (0x00000000)
id           = 3     (0x00000003)
label        = 3     (0x00000003)
fill         = 1     (0x00000001)
leng         = 524   (0x0000020C)
loop         = 224   (0x000000E0)
xtyp         = TYPE#000136
occu         = 10    (0x0000000A)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 0
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x07000000802DB9D8
pghook       = 0x0000000000000000
idxPtr       = 0x0000000000000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 10    (0x0000000A)
lineAlloc    = 10    (0x0000000A)
store_id     = 9     (0x00000009)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x0000000000000000
hsdir        = 0x0000000000000000
ext2         = 0x07000000802D88A0
>>>>> 2nd level extension part <<<<<
tabhBack     = 0x07000000802D8710
delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x0000000000000000
pb_handle    = 0x0000000000000000
IDOC_DATA_REC_40[]
Table IT_4[9x1063]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_DATA_REC_40[]
Table reference: 4
TABH+ 0(20) = 07000000802D880807000000802D896000000000
TABH+ 20(20) = 00000004000000040000000900000427FFFFFFFF
TABH+ 40(16) = 04000009000020500008249001000000
store        = 0x07000000802D8808
ext1         = 0x07000000802D8960
shmId        = 0     (0x00000000)
id           = 4     (0x00000004)
label        = 4     (0x00000004)
fill         = 9     (0x00000009)
leng         = 1063 (0x00000427)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000138
occu         = 8     (0x00000008)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 0
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x07000000802E1550
pghook       = 0x07000000802D8860
idxPtr       = 0x0000000000000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x00000010)
lineAlloc    = 16    (0x00000010)
store_id     = 12    (0x0000000C)
shmIsReadOnly = 0     (0x

Hi Rohan,
Welcome to SDN!
This error means that you're trying to duplicate a record on the DB... check the IDOC number ranges... it might help
Regards
Juan
Please reward with points if helpful

SWN_SELSEN not working in test client after client-copy

Hi all,
We are using extended notification without problem until test client was refreshed by client-copy from production client. In test client, report SWN_SELSEN did not generated notification even there are newly generated workflow items. Because of client-copy, I found that tables SWN_NOTIF, SWN_NOTIFTSTMP, SWN_SENDLOG, SWN_TIMESTAMPS are all empty in test client.
Please advise how to make report SWN_SELSEN back to work in test client. Thanks.
<< Additional information >>
(1) Run report SWN_SELSEN_TEST with test Case 5 - Simulate Send Only. After this, some entries were written to above tables. But test on new workflow item, the schedule report SWN_SELSEN still fail to trigger notification.
(2) Run report SWN_SELSEN_TEST with test Case 4 - Send One Message Only. It triggered notifications for all active workflow items and sent out several hundred emails including workflow item created in step 1. However, further test on new workflowitem, the schedule report SWN_SELSEN is still unable to trigger notification.
I think there may be something else missing, like the timestamp of delta. Please help.
Regards,
Donald

Hello,
I've experienced a few cases where stopping SWN_SELSEN and then restarting it helped to fill up SWN_TIMESTAMPS with proper values. How does that table look after you run it?
What is SWN_SELSEN_TEST?
Chck in SLG1 to get an idea of why it's not working. You can also run SWN_SELSEN in the foreground and debug it to see exactly where and why it goes wrong. Also check ST22.
regards
Rick Bakker
hanabi technology

Error After client copy

Hi all,
I did a client copy in ECC IDES with client 800 as source client.As per the logs , copy is successful.The profile usedf is SAP_ALL.After the copy we logged into the new client which was
created and it looked good. Checked the Logs in SCC3 and it said that client copy was finished sucessfully.However now when we go and execute transactions MM01 and VA01, it is giving a error saying
Batch definition level not found.System inconsistency!
Not sure what went wrong, Any suggestions would be Helpful.
Regards,
Chaitanya.

hi...
send the full details of ur client copy....
what is ur target client where u did this client copy .. i mean in prod dev

PI 7.0 ABAP Proxy Wrong Namespace after Client copy

Similar Messages

Maybe you are looking for