PI 7.0 Post Installation
Hi All,
I am facing diffuculty while doing the Post-installation activities for XI. I don't have the passwords for the Service Users like PILDUSER, PIAPPLUSER, SAPJSF etc.,. When I try to reset/change the password in the User Management Section, I am getting the following error message "An error occurred in the persistence; contact your system administrator". Pls suggest as to what can be done.
Regards,
Divya.
Hi,
Please see the below links
Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
-/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
2004s PI installation - help.sap.com:
http://help.sap.com/saphelp_nw04s/helpdata/en/78/f59442062bcd6ae10000000a155106/frameset.htm
Regards
Chilla
Similar Messages
-
System message at the time of login & need post installation
Hallo Everybody
I just install the SAP IDES ECC 5.0 (SQL database), I also running some transaction, but from 2 days i receive the message at the time of logging
System message
Validity of certificate from list with PSE type >system PSE < ends in 1 day. for more information see the SAP system log (transaction SM21)
but i also check the tran. SM21 but i can't find something that indicate what exact erroe and dignosis.
So please suggest me the solution.
Also what tran. are need to run (Post installation) after the installation. beacause i install IDES on standalone machine (Require Post installation proc.)
System Desc.
SID=ERP
instance no=00
host=sapsrv
database SQL 2005check these links for the PSE error:
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/fb993af7700577e10000000a11402f/frameset.htm
PSE certification validity end
post-processing steps are in the installation guide. -
11.5.10.2 Post Installation Checks: DBC ,JSP checks failed (Resolved)
Hi,
I am trying to install 11.5.10.2 OEL 5 installation on VMware. Its failing in the post installation checks: the DBC check and JSP checks are failing. Looking at the errors, it says that .dbc file is not generated. And because of which the JSP is also failing. I am able to access the portal http://vega.apps11i:8005 , but not anything after that.
So, I tried to generate the dbc file by running the adgendbc.sh file.. but its failing as below:
==============================================
adgendbc.sh started at Sun July 13 07:19:17 PDT 2008
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Params=
Unique constraint error (00001) is OK if key already exists
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
ADD call failed with exit code 127
Trying to update information ...
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
UPDATE call failed with exit code 127
Generating /u01/sam/applvck/vckappl/fnd/11.5.0/secure/vega.apps11i_vck.dbc
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
DBC generation failed with exit code 127
Generating /u01/sam/applvck/vckappl/fnd/11.5.0/secure/vega_vck.dbc
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
DBC generation failed with exit code 127
Updating Server Security Authentication
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
==================================================
So I checked if the librt.so.1, libdl.so.2 and libc.so.6 exist or not. But I see that those exist also. Unable to understand how to fix this. Please help.
Thanks
Vikram
[root@vega ~]# locate librt.so.1
/lib/librt.so.1
/lib/i686/nosegneg/librt.so.1
/lib/rtkaio/librt.so.1
/lib/rtkaio/i686/nosegneg/librt.so.1
/u01/sam/applvck/vckora/8.0.6/lib/stubs/librt.so.1
/u01/sam/applvck/vckora/iAS/lib/stubs/librt.so.1
/u01/sam/oravck/vckdb/9.2.0/lib/stubs/librt.so.1
[root@vega ~]# locate libdl.so.6
[root@vega ~]# locate libdl.so.2
/lib/libdl.so.2
/u01/sam/applvck/vckora/8.0.6/lib/stubs/libdl.so.2
/u01/sam/applvck/vckora/iAS/lib/stubs/libdl.so.2
/u01/sam/oravck/vckdb/9.2.0/lib/stubs/libdl.so.2
[root@vega ~]# locate libc.so.6
/lib/libc.so.6
/lib/i686/nosegneg/libc.so.6
/u01/sam/applvck/vckora/8.0.6/lib/stubs/libc.so.6
/u01/sam/applvck/vckora/iAS/lib/stubs/libc.so.6
/u01/sam/oravck/vckdb/9.2.0/lib/stubs/libc.so.6
Message was edited by: Vikram CI posted the installation log here. Apologize if its too long.
Succesfully changed Permissions for /u01/sam/applvck/vckappl/admin/VCK_vega/log
Processing DriverFile = /u05/start11i/startCD/Disk1/rapidwiz/template/adriapps.drv
Running Instantiation Drivers for /u05/start11i/startCD/Disk1/rapidwiz/template/adriapps.drv
instantiate file:
source : /u05/start11i/startCD/Disk1/rapidwiz/template/adrunias.sh
dest : /u01/sam/applvck/vckcomn/temp/adrunias.sh
backup : /u01/sam/applvck/vckcomn/temp/adrunias.sh to /u01/sam/applvck/vckappl/admin/VCK_vega/out/templbac/adrunias0.sh
setting permissions: 755
setting ownership: applvck:dba
instantiate file:
source : /u05/start11i/startCD/Disk1/rapidwiz/template/adrunat.sh
dest : /u01/sam/applvck/vckcomn/temp/adrunat.sh
backup : /u01/sam/applvck/vckcomn/temp/adrunat.sh to /u01/sam/applvck/vckappl/admin/VCK_vega/out/templbac/adrunat0.sh
setting permissions: 755
setting ownership: applvck:dba
Step 0 of 5
Command: /u01/sam/applvck/vckcomn/temp/adrunias.sh
Step 3 of 5: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has succeeded
Processing Step 3 of 5
Step 1 of 5
Command: /u01/sam/applvck/vckcomn/temp/adrunat.sh
Step 4 of 5: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has succeeded
Processing Step 4 of 5
Starting CVM on Middle Tier.....
Using Context file : /u01/sam/applvck/vckappl/admin/VCK_vega.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u01/sam/applvck/vckappl/admin/VCK_vega/out/07130653/VCK_vega.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Established
ADX Database Utility
getConnection() -->
sDbHost : vega
sDbDomain : apps11i
sDbPort : 1526
sDbSid : VCK
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@vega.apps11i:1526:VCK
Connection obtained
Result : Successfully uploaded the Context information template file to the DataBase
===========================================================================
Completed CVM on Middle Tier....
Succesfully changed Permissions for /u01/sam/applvck/vckcomn/temp
Setting service Oracle Apache Server VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adapcctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
adapcctl.sh version 115.43
Apache Web Server Listener is not running (dedicated HTTP) ...
Apache Web Server Listener is already stopped.
adapcctl.sh: exiting with status 2
.end std out.
cat: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sh: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
sh: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
sh: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
sh: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Setting service OracleTNSListener80APPS_VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adalnctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
adalnctl.sh version
Shutting down listener process APPS_VCK.
adalnctl.sh: exiting with status 0
.end std out.
.end err out.
Setting service OracleConcMgrVCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adcmctl.sh stop
Timeout specified in context file: 1000 second(s)
script returned:
You are running adcmctl.sh version 115.20
Shutting down concurrent managers for VCK ...
adcmctl.sh: exiting with status 127
.end std out.
/u01/sam/applvck/vckappl/fnd/11.5.0/bin/CONCSUB: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Setting service OracleFormsServer-Forms60VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adfrmctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
You are running adfrmctl.sh version 115.34
Unable to create logfile - permission denied
Attempted to write to:
/u01/sam/applvck/vckcomn/admin/log/VCK_vega/f60svrm.txt
adfrmctl.sh: exiting with status 1
.end std out.
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
Setting service OracleReportServer-Rep60_VCK to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adrepctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
You are running adrepctl.sh version 115.29
Reports Server for VCK is already stopped.
adrepctl.sh: exiting with status 2
.end std out.
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
ps: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckappl/fnd/11.5.0/bin/FNDSVCRG: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Setting service Oracle Metrics Client VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adfmcctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
You are running adfmcctl.sh version 115.17
forms load balancing client for VCK already stopped.
adfmcctl.sh: exiting with status 2
.end std out.
.end err out.
Setting service Oracle Metrics Server VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adfmsctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
You are running adfmsctl.sh version 115.13
forms metrics server for VCK on port 9205 already stopped.
adfmsctl.sh: exiting with status 2
.end std out.
.end err out.
Setting service Oracle Fulfillment Server VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/jtffmctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
You are running jtffmctl.sh version 115.16
Shutting down Fulfillment Server for on port 9305 ...
jtffmctl.sh: exiting with status 0
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
Setting service Oracle Discoverer services VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/addisctl.sh stop
Timeout specified in context file: 300 second(s)
script returned:
addisctl.sh version 115.14
OAD is not running
Osagent is not running
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
addisctl.sh: exiting with status 0
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/admkxdir.sh
script returned:
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/adgendbc.sh
script returned:
adgendbc.sh started at Sun Jul 13 06:58:55 PDT 2008
Params=
Unique constraint error (00001) is OK if key already exists
ADD call failed with exit code 127
Trying to update information ...
UPDATE call failed with exit code 127
Generating /u01/sam/applvck/vckappl/fnd/11.5.0/secure/vega.apps11i_vck.dbc
DBC generation failed with exit code 127
Generating /u01/sam/applvck/vckappl/fnd/11.5.0/secure/vega_vck.dbc
DBC generation failed with exit code 127
Updating Server Security Authentication
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/adgenjky.sh
script returned:
adgenjky.sh started at Sun Jul 13 06:58:58 PDT 2008
Unable to create the log file /u01/sam/applvck/vckcomn/admin/log/VCK_vega/VCK_vegajkey.log
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
script returned:
amscmprf.sh started at Sun Jul 13 07:01:34 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/amswebprf.sh
script returned:
amswebprf.sh started at Sun Jul 13 07:01:37 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/wshadmprf.sh
script returned:
wshadmprf.sh started at Sun Jul 13 07:01:47 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
wshadmprf.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/clnadmprf.sh
script returned:
clnadmprf.sh started at Sun Jul 13 07:01:54 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
clnadmprf.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
setting ownership: applvck:dba
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/okeadmprf.sh
script returned:
okeadmprf.sh started at Sun Jul 13 07:02:00 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
okeadmprf.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/okladmprf.sh
script returned:
okladmprf.sh started at Sun Jul 13 07:02:07 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/csfagprf.sh
script returned:
csfagprf.sh started at Sun Jul 13 07:02:21 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
csfagprf.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/csfwebprf.sh
script returned:
csfwebprf.sh started at Sun Jul 13 07:02:23 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
csfwebprf.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
setting ownership: applvck:dba
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/xnccmprf.sh
script returned:
xnccmprf.sh started at Sun Jul 13 07:02:29 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
setting ownership: applvck:dba
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/ibywebprf.sh
script returned:
ibywebprf.sh started at Sun Jul 13 07:02:37 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/paadmprf.sh
script returned:
paadmprf.sh started at Sun Jul 13 07:02:43 PDT 2008
Executable :
ERRORCODE = 127 ERRORCODE_END
Message was edited by: Vikram C -
#I hope its the right forum to post that in, if not im very sorry!
This here is a script i wrote to automate all the stuff i do after installing arch, i have several computers and it has options for a additional one
Some important points:
1) this script is very specific, its made for my computer and my needs, this means that its useful right now only to people who know bash
and will find use in altering it to their own needs, also if someone wants he can make it more general for a wider use
2) this is one of the first scripts i wrote, it may be that it doesn't implent some of its features in the best way possible
3) use it at your own risk, if it breaks your system don't blame me please, you should check it before you use it, anyway its meant to be used
on a FRESH arch install, not on a working system.
What the correct script actually does:
The script as stated in the comments does the next things:
1) First of all it consists of several files, one the "install" file is the actual script, the others are just meant to run the script and split its output to
show both on the terminal and in a file named: /var/log/MySysInstall.log, here is an example of main.install:
#!/bin/bash
./install Main | tee /var/log/MySysInstall.log
in the current script Main in the last row can be replaces with Laptop, Game for computer specific arguments or without argumets for a general install
the two files should be in the same folder, i think it could have been implented with one file but im new to scripting..
2) The script will ask some general questions to make sure everything is currect, some of the questions and checks in the script are not relevant at all
to anybody other than myself, they usually make sure that i have a samba shared partition running (it could lose connection on wireless).
3) Adds the archlinux.fr repo, it will be used for yaourt.
4) The script installs lots of stuff, at first general stuff used by all computers in my house, then stuff based on the argument given in 1)
please inspect the packages and change according to your needs
5) The script nano's to /etc/yaourtrc
6) Adds users to the system, change to your users.
7) It creates my /home/samba share dir if its not created (probably irrelevant to you)
8) Configures sudo in a nasty way that maybe can damage the sudoers file, delete this line if you dodnt know sudo well enough.
9) Edits samba if needed, this is the first line in the script that relies on additional files i have on my comp or the samba share (main and game are the same
comp (dual boot of arch32 and 64) and they are the hosts of /home/samba all the other computers will mount it from them, this is why a samba check is not
present here.).
10) Adds some commented lines to fstab and nano's it for easier configurations, this is the regular workflow in the script BTW (adding comments to the file
before editing it)
11) Helps edit the gpm daemon
12) Helps to configure alsa
13) Helps to configure xorg
14) Does some post install copies of files AND creates a file in my main users home with further instructions, mostly for stuff that needs to be done with xorg runnig
or stuff i was to lasy to add to the script
15) chowns and sets my regular permissions for user folders
16) ends the script
The script itself, ENJOY:
#!/bin/bash
# Copyright 2008 Leon Vayman
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# A copy of the GNU General Public License is found in
# <http://www.gnu.org/licenses/>.
#Check that the user updated the kernel and restarted before proceeding
while [ 1 ] ; do
echo ; clear
echo -n "Have you already used pacman -Syu and Restarted? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
echo "Then do it now.."
exit
esac
done
#Check if samba is accesible and warn the user if its not (offering to quit)
if [ ! -e /home/samba/Config/ ] ; then
while [ 1 ] ; do
echo ; clear
echo -n "Samba is not accesible, do you want to proceed? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
exit
esac
done
fi
#Make sure the app wasnt ran accidently with wrong arguments
while [ 1 ] ; do
echo ; clear
echo -n "The comp you are on is $1 is that correct? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
exit
esac
done
#Edit /etc/pacman.conf
echo ; clear
echo >> /etc/pacman.conf
echo "[archlinuxfr]" >> /etc/pacman.conf
if [ "$1" = "Game" ] ; then
echo "Server = http://repo.archlinux.fr/x86_64" >> /etc/pacman.conf
else
echo "Server = http://repo.archlinux.fr/i686" >> /etc/pacman.conf
fi
echo -n "Make sure the right archlinux.fr repo was added "
read n1
nano /etc/pacman.conf
echo ; clear
#Install all packages
echo "Installing packages"
pacman -Syu
pacman -S yaourt
pacman -S xorg
pacman -S gstreamer0.10-plugins
yaourt -S abiword alsa-lib alsa-utils alsa-oss bash-completion cabextract centerim conky exaile hal epdfview feh freetype2 gamin gconf-editor geany gksu gmrun gnome-icon-theme gpicview \
gtk-engines zip irssi jre links-g libdvdcss tcl lxappearance lxpanel lxde-common lxrandr lxtask mesa moc mousepad mplayer-plugin numlockx openbox obconf obmenu openbox-themes \
p7zip pcmanfm pidgin pm-utils powertop screen terminal ttf-bitstream-vera ttf-dejavu ttf-freefont ttf-ms-fonts unace unrar unzip xarchiver xchat xmahjongg
yaourt -S stjerm
case "$1" in
"Laptop")
yaourt -S vlc keytouch keytouch-editor xf86-video-i810 synaptics cpufrequtils flashplugin
yaourt -S swiftweasel-pentium-3
yaourt -S wpa_supplicant-beta
yaourt -S xcompmgr-git
"Main")
yaourt -S flashplugin cpufrequtils epiphany catalyst deluge amule xmoto abs samba
yaourt -S icecat
yaourt -S xcompmgr-git
yaourt -S ekiga3
yaourt -S ov51x-jpeg
yaourt -S vlc-branch
yaourt -S brasero-no-gnome
"Game")
yaourt -S epiphany catalyst deluge amule xmoto abs samba ##!! add gnash or swfdec
yaourt -S icecat
yaourt -S ekiga3
yaourt -S ov51x-jpeg
yaourt -S vlc-branch
yaourt -S brasero-no-gnome
echo -n "No extra packages installed "
esac
echo -n "Press Enter to continue "
read n1
echo ; clear
#Configure yaourt.rc
echo -n "Replace the editor in yaourtrc "
read n1
nano /etc/yaourtrc
echo ; clear
#Add users
echo "Adding User vleon"
useradd -d /home/vleon -g users -G disk,wheel,games,video,audio,optical,storage,power,dbus,hal,avahi,log -m vleon
echo "Set vleon's password"
passwd vleon
echo ; clear
echo "Adding User masha"
useradd -d /home/masha -g users -G disk,wheel,games,video,audio,optical,storage,power,dbus,hal,avahi,log -m masha
echo "Set masha's password"
passwd masha
echo ; clear
#If for some reason samba dir doesnt exist, create it
if [ ! -e /home/samba ] ; then
mkdir /home/samba
chown vleon:users /home/samba
chmod 770 /home/samba
fi
#Configure visudo
echo -n "uncomment wheel in visudo and make sure the added lines are correct "
read n1
echo "#%power ALL=(ALL) NOPASSWD: /usr/sbin/pm-hibernate" >> /etc/sudoers
echo "#%power ALL=(ALL) NOPASSWD: /sbin/shutdown" >> /etc/sudoers
visudo
echo ; clear
#Edit samba if needed
if ( [ "$1" = "Main" ] || [ "$1" = "Game" ] ) ; then
echo -n "Edit swat "
read n1
cp /home/samba/Config/etc/xinetd.d/swat /etc/xinetd.d/swat
nano /etc/xinetd.d/swat
echo ; clear
echo -n "Edit Hosts "
read n1
cp /home/samba/Config/etc/hosts.allow /etc/hosts.allow
nano /etc/hosts.allow
echo ; clear
echo -n "Edit smb.conf "
read n1
cp /home/samba/Config/etc/samba/smb.conf /etc/samba/smb.conf
nano /etc/samba/smb.conf
echo ; clear
echo "Set vleon's samba password"
smbpasswd -a vleon
echo ; clear
echo -n "Add samba and xinetd daemon to rc.conf "
read n1
nano /etc/rc.conf
echo ; clear
fi
#Edit fstab
echo -n "Edit fstab "
read n1
echo >> /etc/fstab
if [ "$1" != "Laptop" ] ; then
echo "#UUID=92D8DA69D8DA4ADD /mnt/windows ntfs-3g defaults,noatime 0 0" >> /etc/fstab
if ( [ "$1" != "Main" ] && [ "$1" != "Game" ] ) ; then
echo "#UUID=0E15-1D06 /mnt/windows vfat defaults,noatime,umask=0000 0 0" >> /etc/fstab
echo "#//192.168.1.100/samba /home/samba cifs defaults,noatime,noauto,user=vleon%pass 0 0" >> /etc/fstab
echo "##change the above password!!" >> /etc/fstab
fi
nano /etc/fstab
echo ; clear
else
echo "#UUID=0E15-1D06 /mnt/windows vfat defaults,noatime,umask=0000 0 0" >> /etc/fstab
echo "#//192.168.1.100/samba /home/samba cifs defaults,noatime,noauto,user=vleon%pass 0 0" >> /etc/fstab
echo "##change the above password!!" >> /etc/fstab
nano /etc/fstab
echo ; clear
fi
#Edit gpm
echo -n "Edit gpm "
read n1
echo "#GPM_ARGS=\"-m /dev/input/mice -t imps2\"" >> /etc/conf.d/gpm
nano /etc/conf.d/gpm
echo ; clear
echo -n "Add gpm daemon to rc.conf "
read n1
nano /etc/rc.conf
echo ; clear
#Configure alsa
Alsa Config
test=1
echo -n "Edit alsamixer "
read n1
while [ "$test" = 1 ] ; do
alsamixer -V all
echo "Testing Sound"
aplay /usr/share/sounds/alsa/Noise.wav
while [ 1 ] ; do
echo ; clear
echo -n "Did You Hear Any Sound? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
test=0
break
[Nn])
break
esac
done
done
alsactl store
echo -n "Add alsa to daemons "
read n1
nano /etc/rc.conf
echo ; clear
#Configure Xorg
if [ -e /home/samba/Config/etc/X11/ ] ; then
echo -n "Edit xorg.conf "
read n1
if ( [ "$1" = "Laptop" ] ) ; then
cp /home/samba/Config/etc/X11/laptop.xorg.conf /etc/X11/xorg.conf
else
cp /home/samba/Config/etc/X11/main.xorg.conf /etc/X11/xorg.conf
fi
nano /etc/X11/xorg.conf
echo ; clear
echo -n "add \"ru\" to xorg.conf.mom "
read n1
cp etc/X11/xorg.conf etc/X11/xorg.conf.mom
nano /etc/X11/xorg.conf.mom
echo ; clear
else
echo -n "No samba connection found, manually editing xorg.conf "
read n1
X -configure
mv /root/xorg.conf.new /etc/X11/xorg.conf
echo >> /etc/X11/xorg.conf
echo "# Option \"XkbLayout\" \"us,il\"" >> /etc/X11/xorg.conf
echo "# Option \"XkbOptions\" \"grp:alt_shift_toggle,grp_led:scroll\"" >> /etc/X11/xorg.conf
echo "# DefaultDepth 24" >> /etc/X11/xorg.conf
echo "# Modes \"1680x1050\" \"1280x1024\" \"1024x768\" \"800x600\"" >> /etc/X11/xorg.conf
if [ "$1" = "Laptop" ] ; then
echo >> /etc/X11/xorg.conf
echo "#Section \"InputDevice\"" >> /etc/X11/xorg.conf
echo "# Identifier \"Touchpad\"" >> /etc/X11/xorg.conf
echo "# Driver \"synaptics\"" >> /etc/X11/xorg.conf
echo "# Option \"Device\" \"/dev/input/mouse0\"" >> /etc/X11/xorg.conf
echo "# Option \"Protocol\" \"auto-dev\"" >> /etc/X11/xorg.conf
echo "# Option \"LeftEdge\" \"1700\"" >> /etc/X11/xorg.conf
echo "# Option \"RightEdge\" \"5300\"" >> /etc/X11/xorg.conf
echo "# Option \"TopEdge\" \"1700\"" >> /etc/X11/xorg.conf
echo "# Option \"BottomEdge\" \"4200\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerLow\" \"25\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerHigh\" \"30\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerPress\" \"100\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxTapTime\" \"180\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxTapMove\" \"220\"" >> /etc/X11/xorg.conf
echo "# Option \"VertScrollDelta\" \"100\"" >> /etc/X11/xorg.conf
echo "# Option \"MinSpeed\" \"0.06\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxSpeed\" \"0.12\"" >> /etc/X11/xorg.conf
echo "# Option \"AccelFactor\" \"0.0010\"" >> /etc/X11/xorg.conf
echo "# Option \"SHMConfig\" \"on\"" >> /etc/X11/xorg.conf
echo "#EndSection" >> /etc/X11/xorg.conf
fi
echo -n "Edit xorg.conf "
read n1
nano /etc/X11/xorg.conf
echo ; clear
echo -n "add \"ru\" to xorg.conf.mom "
read n1
cp etc/X11/xorg.conf etc/X11/xorg.conf.mom
nano /etc/X11/xorg.conf.mom
echo ; clear
fi
#Start the post install document and copy files to homes if able and need to
echo "Post Installation Instructions" > /home/vleon/PostInstall.txt
echo "------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "Usage: Follow the instructions and delete the lines that are not relevant anymore. you can delete" >> /home/vleon/PostInstall.txt
echo " this file after you finished." >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
if [ ! -e /home/vleon/.config] ; then
if [ -e /home/samba/Config/ ] ; then
cp /home/samba/Config/.bash_profile /home/vleon/ ; cp /home/samba/Config/.bash_profile /home/masha/
cp /home/samba/Config/.bashrc /home/vleon/ ; cp /home/samba/Config/.bashrc /home/masha/
cp /home/samba/Config/.xinitrc /home/vleon/ ; cp /home/samba/Config/.xinitrc /home/masha/
cp /home/samba/Config/.xserverrc /home/masha/
mkdir -p /home/vleon/.config/openbox ; mkdir -p /home/masha/.config/openbox
cp /home/samba/Config/.config/openbox/rc.xml /home/vleon/.config/openbox/ ; cp /home/samba/Config/.config/openbox/rc.xml /home/masha/.config/openbox/
if [ "$1" = "Laptop" ] ; then
cp /home/samba/Config/.conkyrc.laptop /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.laptop /home/masha/.conkyrc
cp /home/samba/Config/.Xdefaults.laptop /home/vleon/.Xdefaults ; cp /home/samba/Config/.Xdefaults.laptop /home/masha/.Xdefaults
cp /home/samba/Config/.config/openbox/menu.xml.laptop /home/vleon/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/menu.xml.laptop /home/masha/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/autostart.sh.laptop /home/vleon/.config/openbox/autostart.sh
cp /home/samba/Config/.config/openbox/autostart.sh.laptop /home/masha/.config/openbox/autostart.sh
else
if ( [ "$1" != "Main" ] && [ "$1" != "Game" ] )
cp /home/samba/Config/.conkyrc.laptop /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.laptop /home/masha/.conkyrc
else
cp /home/samba/Config/.conkyrc.main /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.main /home/masha/.conkyrc
fi
cp /home/samba/Config/.Xdefaults.main /home/vleon/.Xdefaults ; cp /home/samba/Config/.Xdefaults.main /home/masha/.Xdefaults
cp /home/samba/Config/.config/openbox/menu.xml.main /home/vleon/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/menu.xml.main /home/masha/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/autostart.sh.main /home/vleon/.config/openbox/autostart.sh
cp /home/samba/Config/.config/openbox/autostart.sh.main /home/masha/.config/openbox/autostart.sh
fi
else
echo >> /home/vleon/PostInstall.txt
echo "!!Samba is not availble, you will have to create the following files yourself!!" >> /home/vleon/PostInstall.txt
fi
echo >> /home/vleon/PostInstall.txt
echo "The folowing files where probably created in your home folders:" >> /home/vleon/PostInstall.txt
echo ".bash_profile" >> /home/vleon/PostInstall.txt
echo ".bashrc" >> /home/vleon/PostInstall.txt
echo ".conkyrc" >> /home/vleon/PostInstall.txt
echo ".Xdefaults" >> /home/vleon/PostInstall.txt
echo ".xinitrc" >> /home/vleon/PostInstall.txt
echo ".xserverrc #<< only to /home/masha" >> /home/vleon/PostInstall.txt
echo ".config/openbox/autostart.sh" >> /home/vleon/PostInstall.txt
echo ".config/openbox/menu.xml" >> /home/vleon/PostInstall.txt
echo ".config/openbox/rc.xml" >> /home/vleon/PostInstall.txt
echo "!!Make sure the above files created and are configured properly!!" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "Configuration Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) make sure width and hight are correct .Xdefaults" >> /home/vleon/PostInstall.txt
echo "2) make sure to comment the \"xcompmgr\" line in autostart.sh, to fit the Computer and User" >> /home/vleon/PostInstall.txt
echo "3) use obmenu and obconf later to tune up stuff" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "rc.conf Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) possible modules are: powernow-k8 or acpi-cpufreq, cpufreq_ondemand, ov51x-jpeg, fglrx" >> /home/vleon/PostInstall.txt
echo "2) possible daemons are: hal, cpufreq, acpid [laptop], netfs, keytouch" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "General Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) copy or compare the files from /home/samba/Config/etc to /etc" >> /home/vleon/PostInstall.txt
echo "2) on the laptop, dont forget to add the additional scripts needed from the /home/samba/Config/, dont forget to backup replaced files" >> /home/vleon/PostInstall.txt
echo "3) add resume=/dev/sda3 to /boot/grub/menu.lst if its not there already" >> /home/vleon/PostInstall.txt
echo "4) dont Forget to configure gksu after launching X" >> /home/vleon/PostInstall.txt
echo "5) lauch and configure all the apps in the menu and the cmdline apps links -g, mocp, irssi, centerim" >> /home/vleon/PostInstall.txt
echo "6) test logout, reboot, shutdown and hibernate" >> /home/vleon/PostInstall.txt
echo "7) configure keytouch on the laptop" >> /home/vleon/PostInstall.txt
echo "8) if it doesnt exist mkdir ~/.Theme for both users and add a jpg picture named theme.jpg to be the wallpaper" >> /home/vleon/PostInstall.txt
echo "9) read /var/log/MySysInstall.log and make sure all was succesfull especialy AUR install's like icecat or iceweasel" >> /home/vleon/PostInstall.txt
echo "10) run lxappearance, configure lxpanel, configure terminal" >> /home/vleon/PostInstall.txt
echo "11) run powertop after you restart again with all the modules and daemons and other stuff configured" >> /home/vleon/PostInstall.txt
#Return ownership to the approtiate users
chown -R vleon:users /home/vleon ; chown -R masha:users /home/masha
chmod /home/vleon 750 ; chmod /home/masha 750
chmod /home/vleon/.config 750 ; chmod /home/masha/config 750
chmod /home/vleon/.config/openbox 750 ; chmod /home/vleon/.config/openbox 750
#End
echo "Install Finished, please additional instructions where created in /home/vleon/PostInstall.txt"
read n1
exitluckystar09 - I'd say you're on your own there. This thread is nearly a year old, and Black Mage hasn't posted here since. Read the script, and modify it yourself as required.
Forum rule - do not post in threads that have been inactive for six months of more. See here for full details.
Closed. -
11.5.10.2 Post Installation Check Failures in Linux
Hi All,
I had installed 11i (11.5.10.2) in an external drive (made as a Linux OS through VM Ware) and was trying to access through my laptop (having OS XP Professional)
The Installation of 11i in Linux (RHEL 4) went fine, except during the post installation checks I got the following errors:
1. JSP Check failed
and
2. Environment File Check failed
============================================
For the JSP Check:
a. I ensured the dbc file in $FND_SECURE top is fine
b. The jserv.log file shows as below:
java.lang.NumberFormatException: For input string: "%s_servlet_init_timeout%"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Long.parseLong(Long.java:394)
at java.lang.Long.<init>(Long.java:630)
at org.apache.java.util.Configurations.getLong(Configurations.java:678)
at org.apache.java.util.Configurations.getLong(Configurations.java:657)
at org.apache.jserv.JServServletManager.init(JServServletManager.java:320)
at org.apache.jserv.JServ.start(JServ.java:622)
c. The mod_jserv.log is as follows:
[04/07/2008 15:42:21:813] (EMERGENCY) ajp12: function auth fail
[04/07/2008 15:42:22:233] (EMERGENCY) ajp12: auth did not receive challenge size
[04/07/2008 15:42:22:234] (EMERGENCY) ajp12: function auth fail
[04/07/2008 15:42:29:394] (EMERGENCY) ajp12: auth did not receive challenge size
[04/07/2008 15:42:29:395] (EMERGENCY) ajp12: function auth fail
[04/07/2008 15:42:29:763] (EMERGENCY) ajp12: auth did not receive challenge size
d. I had given the virtual host as vision.imax.info, where imax.info is a named server that is registered
I am able to dig vision.imax.info, as shown below:
[root@vision etc]# dig vision.imax.info
; <<>> DiG 9.2.4 <<>> vision.imax.info
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 3228
;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;vision.imax.info. IN A
;; Query time: 12 msec
;; SERVER: 192.168.222.5#53(192.168.222.5)
;; WHEN: Fri Jul 4 18:59:56 2008
;; MSG SIZE rcvd: 34
but please note that my ifconfig gives the following output:
[root@vision etc]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:5E:C8:97
inet6 addr: fe80::20c:29ff:fe5e:c897/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:15421 errors:0 dropped:0 overruns:0 frame:0
TX packets:11828 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1464189 (1.3 MiB) TX bytes:2554712 (2.4 MiB)
Interrupt:177 Base address:0x1080
eth0:0 Link encap:Ethernet HWaddr 00:0C:29:5E:C8:97
inet addr:192.168.222.5 Bcast:192.168.222.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:177 Base address:0x1080
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2058114 errors:0 dropped:0 overruns:0 frame:0
TX packets:2058114 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:297458110 (283.6 MiB) TX bytes:297458110 (283.6 MiB)
and the linux OS having the static IP as follows:
IP: 192.168.222.5
Mask: 255.255.255.0
Gateway: 192.168.222.5
Primary DNS: 192.168.222.5
========================
And for the Environment File check:
The Error is:
RW 10006: Error: - APPL_TOP environment files has uninstantiated variables
File = /d01/oracle/visappl/VIS_vision.env
But I am not able to locate which variable is not instantiated...
Please help me to resolve this out... Please correct me if I am wrong any where..
Many Thanks....Please note that, when I restarted the application services in a different terminal, I got the following script Error, only for the below mentioned script:
Executing service control script:
/d01/oracle/viscomn/admin/scripts/VIS_vision/addisctl.sh start
script returned:
addisctl.sh version 115.14
/d01/oracle/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
Cannot bind to OAD. Re-starting...
OAD is stopped
Osagent is stopped
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
/d01/oracle/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
Registering Discoverer Session
Registering the Collector
Applying preferences from file : /d01/oracle/visora/8.0.6/discwb4/util/pref.txt
Finished applying preferences
Closing down registry..
Registry File sync...
Registering Discoverer Preference Repository
addisctl.sh: exiting with status 127
.end std out.
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
.end err out.
Check logfile /d01/oracle/viscomn/admin/log/VIS_vision/07042249.log for details
Exiting with status 1
====================
The /d01/oracle/viscomn/admin/log/VIS_vision/07042249.log file shows the following too:
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server VIS_vision adapcctl.sh Started
OracleTNSListener80APPS_VIS_vision adalnctl.sh Started
OracleConcMgrVIS_vision adcmctl.sh Started
OracleFormsServer-Forms60VIS_vision adfrmctl.sh Started
OracleReportServer-Rep60_VIS adrepctl.sh Started
Oracle Metrics Client VIS_vision adfmcctl.sh Started
Oracle Metrics Server VIS_vision adfmsctl.sh Started
Oracle Fulfillment Server VIS_vision jtffmctl.sh Started
Oracle Discoverer services VIS_vision addisctl.sh Failed
Oracle Restricted Apache Server VIS_vision adaprstctl.sh Disabled
Oracle Apache Server VIS_vision for PL/SQL adapcctl.sh Disabled
Oracle TCF SocketServer VIS_vision adtcfctl.sh Disabled
Oracle ICSM VIS_vision ieoicsm.sh Disabled
Oracle iProcurement Bulk Loader VIS_vision icxblkctl.sh Disabled
ServiceControl is exiting with status 1
Where could be the problem for the above issues.... -
WSUS reinstall on 2012 SCCM server post-installation task fails to run/finish
I had to re-install WSUS on a 2012 R2 SCCM server (Windows 2012), and am running into several issues re-installing. It may help to point out that the SCCM SQL server is remote, so this isn't a WSUS / SQL 2012 issue.
The sticky post at the top of the WSUS forum has helpful troubleshooting information, and I have tried going through this as well as many other threads on this very topic of re-installing WSUS.
1. Roles for WSUS and WID were removed successfully. The WSUS Website was manually deleted from IIS. As this is a SCCM server, removing the IIS role is not an option.
2. I removed the existing WID database files for SUSDB
3. After rebooting, I verified registry keys were gone, system files were cleaned up, and deleted the program files\update services directory
4. This isn't a permission issue, as I have clearly installed this before on this server.
5. Registry keys, system files, and susdb files no longer exist, and the server has rebooted cleanly.
6. I am able to add the WSUS role selecting WID, and this installs WID without any errors. At this point, simply clicking the post installation task fails, generates an empty .tmp file in my %appdata%\temp folder, and exits the MMC.
7. This file is blank. Absolutely empty, so I couldn't really troubleshoot any post installation tasks.
8. Further investigation shows that the 'C:\Program Files\Update Services\Tools\' directory is gone, and isn't being
generated.
9. Ok... DISM /online /Cleanup-Image /Scanhealth didn't return any issues, so I copied the wsusutil out of the windows\WinSxS directory.
10. Yey! wsusutil postinstall runs, but bombs out on the IIS portion. It generated the DB without an issue, but results
in an IIS generation error. So, I installed WSUS on a clean 2012 install, then copied over the program files\updateServices directory to reclaim the missing files.
The log files show --
2013-12-06 10:30:34 Configuring IIS...
2013-12-06 10:30:35 Start: ConfigureWebsite
2013-12-06 10:30:36 Configuring website on port 8530
2013-12-06 10:30:39 System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
... ok - tripple checked that network service has permissions to .net and windows\temp folders.
netstat -a doesn't show anything running on port 8530 ( in case this was some weird port check in use)
Which goes back to the missing directory problem -- further net searches show that this is a reoccurring issue for some OOBE... sfc /verifyonly shows ... nothing.
What is left to be done at this point? The missing folders from the program directory seems to be a problem for some with some users right out of the box. I have read many other threads where users just formatted and started over. Not exactly a solution
- any help out there on this issue? Any suggestions to determine what file is missing, or generating the IIS issues?Part of the post install tasks wanted to download some items including the tools folder.
Can you expand on this please. The WSUS post-install tasks do not download anything, except what is acquired during the initial synchronization with Microsoft.
Because of my group policy the WSUS server was trying to download the updates from itself even though it was not setup yet.
What update(s) was the WSUS server trying to "download"?
In fact, if the WSUS Server was not setup yet (but you already had a GPO in place), then the first issue here was performing deployment steps out of order.
But still.... except for the actual installation binaries for the WSUS Server Role on a WS2008SP2/WS2008R2 system, there's nothing the WSUS server needs to get from either Windows Update or a WSUS server. This scenario is actually discussed hundreds of times
in this forum, but complicating matters, this thread isn't about installing WSUS V3.2 on a WS2008SP2/WS2008R2 system, it's about installing WSUS v65 on a WS2012 system, so I'm a bit confused as to what the actual installation environment is that we're discussing.
I changed the WSUS server to get it's windows updates from Microsoft and then the post install task succeeded.
I'd really like to get some more details about what exactly in the "post-install task" was dependent upon content from WU/WSUS.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Oracle 8.0.5 Post Installation Problem
Hi all,
I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
However, I am running into a couple of post-installation
problems.
1. root.sh (sucessfully ran).
2. glibc patch (successfuly ran). There were a few errors on the
screen with the "mv" commands (file does not exist). Is tha
alright?
3. catrep.sql (problem). This is where I have a problem.
I ran dbstart as oracle805 (installation account), but I have no
idea whether or not I really started the database. ps -aux did
not yield any clue.
I also tried svrmgrl and "startup", but the file "initXXX.ora"
did not exist, so I copied the existing "init.ora" to
"initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log gave
me the following:
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
So, in other words, I have no idea whether or not I have
successfully installed Oracle. All insights are greatly
appreciated.
Thanks a bunch...
Anh
nullPhan Anh Tran (guest) wrote:
: Hi all,
: I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
: However, I am running into a couple of post-installation
: problems.
: 1. root.sh (sucessfully ran).
: 2. glibc patch (successfuly ran). There were a few errors on
the
: screen with the "mv" commands (file does not exist). Is tha
: alright?
: 3. catrep.sql (problem). This is where I have a problem.
: I ran dbstart as oracle805 (installation account), but I have
no
: idea whether or not I really started the database. ps -aux did
: not yield any clue.
: I also tried svrmgrl and "startup", but the file "initXXX.ora"
: did not exist, so I copied the existing "init.ora" to
: "initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log
gave
: me the following:
: ORA-00202: controlfile: 'ora_control1'
: ORA-27037: unable to obtain file status
: So, in other words, I have no idea whether or not I have
: successfully installed Oracle. All insights are greatly
: appreciated.
: Thanks a bunch...
: Anh
Hei !
I also did this fault :-( See this webpage - it's excellent
and describes everything.
http://jordan.fortwayne.com/oracle/rh6x.html
null -
Post - Installation SAP R/3 4.7 - Urgent !!
Hi All,
I have installed SAP R/3 4.7. I would like to know what are the post-installation steps involved in it. I went through the installation guide. But, I am not able to understand the details provided in that. Can somebody tell me what are all the steps involved as a part of the post installation.
Kindly Help !!! Its urgent !!
Regards,
Rose.Hi,
Initial Consistency Check
SM28
Edit Batch Jobs
Workbench Organizer Reconfiguration
TMS Configuration
Import Printers
Client Configuration
SCC4
Set System Change Option
SE06
STMS
SCC7
SM37
Deleting Source System Profiles
RZ10
Reconfigure Operation Modes
RZ04
Delete Update Failures
SM13
Delete Batch Input Sessions
SM35
Reorganize Spool
SPAD
SP12
Delete Invalid Background Control Objects
Restrict Outgoing Email and Faxes
SCOT
Adjust RFC connections.
SM59
Adjust Logical Systems names
SALE
Hope this helps.
Cheeers
Deepanshu -
SCM Dialog instance installation, post installation activity for livecache
Hi All,
We have installed SCM 7.0 Central instance with Livecache server. Now we have successfully installed additional application server (i.e. Dialog instance) for this SCM 7.0 system.
We need to know
After installation of SCM 7.0 Dialog instance what are the post installation activities?
How we should integrate the livecache server with the Dialog instance which is installed on different hardware.
We need to know how livecache server understand that the additonal application server ? Is there anything to do in LC10?
Please reply
ThanksHi Ashley,
Thanks for your time.
Since i am installing app server, the SAP<SID> group will have to be online on this node. There is another group containing shared drives for components for livecache. This is also required to be online on node 2 for app server installation.
The only cluster resource I can move back to node 1 is ORACLE<SID>. Tried doing that, but no luck.
Any one here facing similar issue during SCM dialog instance installation in MSCS environment?
Regards,
Kiran -
Post-Installation Process Error (Template Base)
Hi Experts,
I try to run template base post-installation process in client 100, we never run post installation process in client 001 (Which is recommended before making the client copy), while doing template base post-installation process failed (got error) at PIPostInstallProcess step 7 u201CAdd Installed Product2u201D I move further and then it failed at step 19 (u201CConfigure the Role of the Integration Serviceu201D) and 20 (Register Queues) same process. It failed at number of process, so what I did I move to manual post-installation process but I stuck in the step were we need to import exchange_profile.xml because I can not see this file at sap\BX0\SYS\global, is this file being deleted by template base post-installation if yes then how to recover it?
Without this file i can not complete the manual post installation process...:-(
With Regards
Sunili think we do not need exchange_profile.xml file in 7.0 post-installation. ok i skip that step in post-installation now when i created LCRSAPRFC_BX0 in Visual Admin services->JCo RFCProvider and try to start it, it is throwing an Error.
I am using user "PI_JCO_RFC" has respective role assign to it.
I am not sure whether i am providing correct value to these filed or not
Gateway Host
Gateway Service
Application server host
System Number
Client
can somebody send me detail about these fields
With Regards
Sunil -
Info about post installation - erp 6
hi to everyone...
i have finished intallation of erp 6 ids..
and im looking for some pdf that includes all the informetion about the post instalation of a system
thing like:
registretion
logical system
stms post install
xyz system
copy client
sp
and all the rest...
does this info is exist in one???
thanks alot- yossiHi,
Please look at this
[Postinsatllation steps |http://sapbasiss.blogspot.com/2008/03/post-installation-steps-for-ecc-60.html]
Thanks,
Muralidhar -
Post installation error "Local logical system is not defined"
Hello everyone,
I freshly installed the latest SAP NetWeaver 7.01 ABAP Trial from scratch and like to configure ALE.
I followed thew steps of http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/CABFAALEQS/CABFAALEQS.pdf
(ALE Quick Start) but cannot get through the following step on page 12:
From the R/3 Implementation Guide screen in TA SALE
choose Basis
Application Link Enabling (ALE)
Modeling and Implementing Business Processes
Maintain Distribution Model and Distribute Views
Clicking on Maintain Distribution Model or using TA BD87, I immedeately get the following error:
The initialization of the logical system has failed.
With TA BD64 the error: Local logical system is not defined arises. I also looked at
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi,
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1 and
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide describing the same actions
to find an explanation, but without success
I assume, the error does not occur because the trial version does not support it, but
because of other post installation activities that must be done.
I already created two logical systems and assigned them to newly created clients 100 and 200,
but this did not have any impact on BD87 and BD64 as i was hoping.
Does somebody know what to do here?
Thanks in advance and kind regards,
AndreasHi Naveed,
i made the following settings:
SCC4: new entries created
100 Sending System
200 Receiving System
SM59: new ABAP type 3 connections:
RFC_DEST_LS_100
RFC_DEST_LS_200
- Tab Logon & Security Logon user: current user (bcuser client 001)
Connection test is successful
- Technical Settings: target host: localhost
SALE: new logical systems created
LS_100
LS_200
SCC4:
double click on 100 Sending System configured with logical system LS_100
double click on 200 Receiving System configured with logical system LS_200
kind regards
Andreas -
Error in PI 7.0 not connect to go.bat & Post installation errors
im completed installation of PI 7.0
SYSTEM NAME : BIW7
System ID : BI7
DB ID : BIW
Instance No : 04
for post installation unable tp connect go.bat
im giving right password
http://biw7:50400/ExchangeProfile = it gives error 404 not found
http://biw7:50400/sld gives following error
503 Service Unavailable
Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.For exchange profile, ur URL is incorrect. Try this
http://biw7:50400/exchangeProfile
Regards,
Prateek -
Post-installation Error Oracle 9i on Red Hat 8.0
After installing the package, I tried to follow the following
Post-Installation
Let's fix the issues Oracle had with ins_ctx.mk and starting the agent. Open a new terminal and log in as the oracle user. Execute these lines:
[oracle@miniroko oracle]$ cd $ORACLE_HOME/network/lib
[oracle@miniroko lib]$ make -f ins_net_client.mk install
But the linker doesen seem to identify one of the options and I've got the error:
make -f ins_net_client.mk install
chmod 755 /home/oracle/OraHome1/bin
/home/oracle/OraHome1/bin/echodo gcc -L/home/oracle/OraHome1/lib/ -L/home/oracle/OraHome1/rdbms/lib/ -L/home/oracle/OraHome1/network/lib/ -L/home/oracle/OraHome1/lib/ -L/home/oracle/OraHome1/rdbms/lib/ -L/home/oracle/OraHome1/network/lib/ -o trcasst /home/oracle/OraHome1/network/lib/s0nue.o -lntal9 \
-lclntsh `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 `cat /home/oracle/OraHome1/lib/sysliblist` -ldl -lm -lnonc9 -lnl9 -ln9 -lnlsnr9 -lnlsnrc9 -lnsgr9 -lnmd -lnms -lncm9 -lnmsp -lpeer -lnro9 -ln9 -ltrace9 -lnl9 -lnonc9 -lnlsnr9 -lnlsnrc9 -lnmd -lnms -lncm9 -lnmsp -ln9 `cat /home/oracle/OraHome1/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome1/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome1/lib/sysliblist` -ldl -lm /home/oracle/OraHome1/rdbms/lib/defopt.o
gcc -L/home/oracle/OraHome1/lib/ -L/home/oracle/OraHome1/rdbms/lib/ -L/home/oracle/OraHome1/network/lib/ -L/home/oracle/OraHome1/lib/ -L/home/oracle/OraHome1/rdbms/lib/ -L/home/oracle/OraHome1/network/lib/ -o trcasst /home/oracle/OraHome1/network/lib/s0nue.o -lntal9 -lclntsh -lnbeq9 -lnhost9 -lnus9 -lnldap9 -lldapclnt9 -lnsslb9 -lncrypt9 -lnoname9 -ln9 -lntcp9 -lntcps9 -lnsslb9 -lntcp9 -lntns9 -ln9 -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 -lnbeq9 -lnhost9 -lnus9 -lnldap9 -lldapclnt9 -lnsslb9 -lncrypt9 -lnoname9 -ln9 -lntcp9 -lntcps9 -lnsslb9 -lntcp9 -lntns9 -ln9 -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnbeq9 -lnhost9 -lnus9 -lnldap9 -lldapclnt9 -lnsslb9 -lncrypt9 -lnoname9 -ln9 -lntcp9 -lntcps9 -lnsslb9 -lntcp9 -lntns9 -ln9 -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 -lnbeq9 -lnhost9 -lnus9 -lnldap9 -lldapclnt9 -lnsslb9 -lncrypt9 -lnoname9 -ln9 -lntcp9 -lntcps9 -lnsslb9 -lntcp9 -lntns9 -ln9 -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -ldl -lm -lpthread -ldl -lm -lnonc9 -lnl9 -ln9 -lnlsnr9 -lnlsnrc9 -lnsgr9 -lnmd -lnms -lncm9 -lnmsp -lpeer -lnro9 -ln9 -ltrace9 -lnl9 -lnonc9 -lnlsnr9 -lnlsnrc9 -lnmd -lnms -lncm9 -lnmsp -ln9 -ldl -lm -lpthread -Wl,-rpath,/home/oracle/OraHome1/lib:/lib:/usr/lib -lm -ldl -lm -lpthread -ldl -lm /home/oracle/OraHome1/rdbms/lib/defopt.o
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
make: *** [trcasst] Error 1
SERVER02>
TIA,
Juliana de PaulaI think you have to relink genclntsh lib ... there should be a script... genclntsh in $ORACLE_HOME/bin.
the directive -laaa means that linker is looking for libaaa.
If an error occure, if I remember correctly try to remove the -Z flags in ld command.
Bye
Pier Paolo -
SLD port problem in Netweaver XI post installation configuration steps
Hi All,
Recently we changed the port number of the SAP server to 80.Every thing working fine.
When ever we are configuring the XI that mean the post installation steps for Exchange Infrastructure it giving the errors in machine_technical_configuration step.
Error Message is:
Element 'SAPConfigLib.NW5.Unclassified.addInstalledProduct':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.NW5.Unclassified.addInstalledProduct':Error during executing Java Reflection:IO error: Unable to open connection to host "mmsr18:50000". The host is down or unavailable..
Is there any solution to solve this....
Thanks & Regards,
Vivek.hi
check if the new port(80) is maintained in tcode- sldapicust
Thx
jonu -
Transport Request as Per TMS in XI 3.0's Post Installation
Hi Everybody !!
..I have completed cinst, dbinst, client copy, jinst, xinst installation for XI 3.0 INSTALLAION ON ABAP + JAVA.
SAP_BW , SAP_BASIS, SAP_ABAP and PI_BASIS Patches have been applied. I am doing the XI Post Installation Steps and for that as per the Post Installation Steps' Guide, I need to perform SAP XI customizing... I am done till the stage of using tr code SWF_XI_CUSTOMISING to perform the basic
customising of SAP XI. But, after entering prefix no. higher than 900 for the new user with 'local object' selection... I have confusion for the following instruction :
" You need to enter a transport request according to your transport management system ( TMS ) and choose Save again.."
I don't see any tms button or any menu option and hence, have no idea how to enter a transport request and where to enter that request...
I sincerely aprreciate the help provided and just for the record, I never fail to assign points for helpful answeres..
Thanks in Advance Again..
Regards..
-Rupen PatelHi Rupen,
You just have to make sure that nodes Maintain Runtime Environment and Maintain Definition Environment have green hook (not a red cross) after all the customizing done in transaction SWF_XI_CUSTOMIZING.
The instruction "You need to enter a transport request according to your transport management system ( TMS ) and choose Save again" is not so much important as it is just an informative instruction. Even i don't remember doing such a task and my XI environment is working perfectly fine.
Regards,
Abhishek
Maybe you are looking for
-
---We are trying to setup Hyper-V on Samba shares samba version 3.6 exported from Ubuntu M/c. Basically runnig the Public(share) from the Ubuntu and able to access it from Windows 2012 (create/modify everything). I used Hyper-V and placed the disks
-
Error in Oracle Database Reference 11g Release 2 (11.2) E25513-04
The V$ASM_FILE view description is probably not correct: In an Automatic Storage Management instance, V$ASM_FILE displays one row for every Automatic Storage Management file in every disk group mounted by the Automatic Storage Management instance. In
-
Tables not getting reversed in ODI
Hi John, I tried reversing a Schema(Oracle), But when i clicked on Rverse, the tables are not getting, reversed. Please suggest. I tried executing the script in Oracle and it fetched 0 rows. Thanks, Sravan
-
I lost my /var/lib/pacman/local
Yes I did. Just when the "stable" version of pacman got the new pacman-optimize script. Because optimizing failed with some md5sum error and because I'm a "smart" & "do it my way" tipe of guy, I figured that removing everything under /var/lib/pacman
-
What is the use of update mode of an function module . how to use it .