PI 7.1 CTS+ - Manually deleted object in PRD system

Hello,
We have PI 7.1 with CTS+ configured. However, there was a condition that an object was deleted manually in PRD system not via CTS+. After this all the transports that were connected to that object and transported to PRD system were imported successfully but ! the changes weren't set in PRD. That means, the CHR transported to PRD but the changes are not applied.
Any idea how t solve this problem ?
Please advice,
Dimitry

Hi Dimitry,
please check if the XI object you're trying to import have a lower version in PRD than in DEV/QAS.
In the opposite way if the XI object has a more recent version in PRD you'll not be able to update the object, since for the sistem the version you're trying to import is an old one.
Hope this help
Best Regards,
Francesco

Similar Messages

Is there a way to create a transport to mass-delete objects from another system?

I am facing a unique issue where I have to generate a transport that will successfully import into an external SAP system and delete over 1,000 objects (reports, data elements, UI elements, transactions, function groups, the whole lot...). All of these objects can be easily looked up because they are in the same namespace.
Essentially, I need to remove all objects with a given namespace via transport.
Is there any way to do this other than manually deleting all of the objects in the source system and adding them tediously to a single workbench request? This would take hours if not days to do manually, especially due to dependency issues.
Thanks for any and all constructive feedback!

Hi,
I did a quick test: created a new package (development class) with one table, one function group using the table in global data definitions containing one function module referring to the table in interface, and one program that's calling the function module and using table in data definitions. Released the transport to Q.
Then, in the second our dev system, I created the same package and TADIRs for the three objects manually (SM30); released transport to Q of that system. Then I manually created transport containing all the three objects, the export log looked like this:
TADIRs in second dev system were gone after export.
Then I added transport to the first development system and imported
- the objects were gone (including their TADIRs) leaving the empty package.
In retrospect, I should have deleted the empty package in second system so it's cleaned up by the same transport.
If you do have access to "clean" system, doing via ABAP the steps I did manually should not be too much of a challenge.
I may have simply gotten lucky and if this works with all objects, for all kinds of dependencies, remains to be seen... though I was until now under impression that import itself doesn't check any dependencies at all... What kind of messages were you getting?
cheers
Janis

Delete objects

Hi all.
I wanna know how can i delete Portal objects through a transport package.
I mean that i want to delete an Object into PRD system and i cant do this directly with the Portal Content Studio, because i havent access to it. I need to do the the deletion with a transport package.
Is it possible? If so, how can i do it?
Regards.
Gregory.

Hi Gregory,
There is no way you can delete the PCD Objects. But what you can do is, Delete the unwanted PCD Objects in Dev from the role and do the transport again which would update the role but the PCD objects will be there in Portal Content.
For example
Role
WKS
Page
iView1
iView2
iView3
now you donot want iView2 for this go to the role and delete the iView under the role which will update the role so after deleting the iView your role will be:
Role
WKS
Page
iView1
iView3
now create a transport Package and transport to Prod.
when you do that it will update the role structure in prod. but you will find the iView2 in the Portal Content.
I hope this helps.
Cheers-
Pramod
Award points if helpful.

Restore deleted objects with local transports ?

hi experts,
while trying to delete existing source system and create the same again in RSA1, I deleted some of the BW objects as it was asking to delete. Now I could not activate the bw source system, which I created newly. I have local transport created for the deleted objects. Is it possible to restore the deleted objects back.
Thanks,
Usha

Hi,
Welcome to SDN !!!!!
Is it only single BI system or any other BI system exists. If exists are these deleted objects moved to that other system. If yes then try to create the requests of deleted objects in that system and then transport them here. If it is only a single system then as per my knowledge I dont think it is possible to resote them from local requests. Normally if you have two clients in a system and if you want changes from one client to be copied to other then we do it using SCC1. But I guess you BI system might have only one client and I think transporting them in the same client would not work. But anyhow just give a try by using SCC1 tcode.
In last case check with your BASIS consultant if they are taking backup and till what date backup exists. If backup exists then ask them to restore the same and this will restore the complete system to date of which the backup exists.
Regards,
Sharath

Transportation of deleted objects

Hello All,
some unnecessary Queries and workbooks are transported to Test system and then to Production.Instead of deleting them manually in each system,i think we can delete them in development and write to transport request and then transport it to test and production systems..
can anybody let me know the procedure?
Bye.

Hi Rakesh,
Normally you can use RSZDELETE for deleting queries and other reporting objects in Dev Also. If such a object was already transported before, you will automatically get a transport request for the deleted object. There is no need to goto the transport connection for that. After releasing and tranporting the request, the objects will automatically be deleted in the target systems.
If you clear your open bex request and then do the deletions that you want to do, the only things in your bex request will be the queries to delete. If it is collecting other objects that you don't want to transport, you can manually remove those objects from your transport.
Hope this helps,
Sudhakar.

Using Charm at cutover to handle deleted objects

Hello experts,
System landscape contains of dual landscap meaning one project ladnscape and one maintenance landscape.
Project: D01>T01>Q01 ( no charm )
Maint: DEV>QAS>PRD ( charm is used )
At project Go Live cutover is done från Project line Q01 to Maint DEV.
All transports imported in Q01 is added manually to import queue of Maint DEV and imported.
After that 1 WB request and 1 Cust. request is created via charm and all objects from the
cutover transports imported are added to those chamr transports. Then charm handles the
transport process through the maint landscape up to production.
Problem
=======
If cutover transports contains deletion of objects, the transports are imported to DEV maint, object is deleted.
When including all objects from cutover transports into the two charm transports it will then ofcourse fail during
releae of the transports on the deleted objects as they no longer exist in DEV maint. This is of course not a specific
charm problem but a TMS problem. Or not even a problem it is as it should be.
Question
========
Is there any way of handling this scenario, can charm in any way handle this ?
Thanks,

I checked the link you provided and that descibes as you say a dual landscape but i don't think it will solve this problem.
As i understand you setup the retrofit process one-way and that would be Maint DEV --> Project DEV.
That is all fine keeping all changes done in maintenance landscape in synk with project landscape.
But the cutover process is manual, as also the drawing states, meaning adding project landscape transports
to Maint DEV system import queue and import them. But if a transport contains objects with the delete flag it will be
deleted in the Maint DEV system. All fine that far. But when you then inlcude all cutover transports objects into a charm transport it will not check if object still exist in Maint DEV system ( wich it does not anymore ), it will include evertyhing that is part of the cutover transports. Meaning you include objects with delete flag on it. When you release this now in Maint DEV system what it does is to check if object exist in TADIR, it does not. You can fool this release process by manually create an entry in TADIR, release the transport, then delete the entry in TADIR. But if you have cutover transports with many deletions, then this is not the way to go.
So please explain how the retrofit procedure would help in the scenarion at cutover and delete flag.
Thanks.

SAP Note 1304803 - Manual Deletion vs Changing Package to SDEL

Good afternoon, Experts
We're implementing this note and it is telling us to delete program TH_E070E but first it has us move it from package STRW to SDEL. Package SDEL is labelled "Objects from SL Group Flagged for Deletion".
My question is - Since we've moved the program into package SDEL have we in affect "deleted" it or do we have to go further and actually now delete it altogether???
I'd appreciate any info you can share on this.
Thanks,
Chad

Hello Chad
Yes, you have to manually delete it using se38->delete.
We did implement this note in our systems recently.
As per note, first while deleting TH_E070E using se38, did it give any message like: STRW doesn't exist ?
If yes, only then, I hope you have Changed Object Directory Entries, right ?
Now, you have to delete it manually using SE38 and now it should not give you message 'STRW doesn't exist', and will ask you for access key, both for developer and the object. Get it done from service.sap.com and put the access keys, program will be deleted.
thanks
Bhudev

Deleting objects in transport request

Hello,
I made the changes in InfoCube in developer system and included those changes in a transport request. I didn't release this transport. Then I realized that those changes must be reverted.
I know what I have to do. First of all I need to change manually InfoCube and then remove objects from transport request.
I have doubt about deleting objects. In transport request there is a lot of object which Iu2019ve never changed such as InfoObjects and InfoArea.
Can I safely remove these objects? Why these objects are attached to my transport request?
I checked them and last change was made by another user.
Thank you for your time.

Hi,
I don't think there is any version comparison available with target system like R/3 reports. You will manually have to compare the properties.
If you have lot of objects and do not want to loose any changes then you can even think of reverse transport from production system to development system for selected objects.
Now about locking the remaining objects you can open the TR through SE09 in change mode and then select the required items and from the tool bar you can directly lock all the items in single go.
Regards,
Durgesh.

Deleting objects from MDS

Hi.
I want to know if and how we can remove/delete objects already loaded into MDS.
The context is old or obsolete objects which are not used any more but still sitting in MDS.
Thanks and Regards,
Jyotideep Singh (JD)

Hi All,
I have included my own folder in ${AIA_HOME}/AIAMetaData/AIAComponents and want to save it in MDS by running ANT command for UpdateMetadata.xml but it is not saving it. It is saving only files not directories. I have mentioned the UpdateMetaDataDP.xml file here. Please let me know how can I resolve this issue.
Following are the steps I followed:
1> I moved all the folders in ${AIA_HOME}/AIAMetaData/AIAComponents which I wanted to be there by FTP.
2> I updated the locations in UpdateMetaData.xml file (Please see the content below).
3>Ran ANT command for UpdateMetaData.xml file.
4>Result was Build Successful.
5> If you see the file below, in first UpdateMetaData tag, I want to save all the subdirectories and files under Manufacturing but it is not doing so.
Same is the case in other tags.
Kiindly suggest the steps as it is hampering our development work.
----------------------------------------------------------------------UpdateMetaDataDp.xml-----------------------------------------------------------------------
<?xml version="1.0" standalone="yes"?>

<DeploymentPlan component="Metadata" version="3.0">
<Configurations>
<UpdateMetadata wlserver="fp" >
<fileset dir="${AIA_HOME}/AIAMetaData">
<include name="AIAComponents/EnterpriseBusinessServiceLibrary/Industry/Manufacturing/*.*" />
</fileset>
</UpdateMetadata>
<UpdateMetadata wlserver="fp" >
<fileset dir="${AIA_HOME}/AIAMetaData">
<include name="AIAComponents/ApplicationObjectLibrary/*.*" />
</fileset>
</UpdateMetadata>
<UpdateMetadata wlserver="fp" >
<fileset dir="${AIA_HOME}/AIAMetaData">
<include name="AIAComponents/EnterpriseObjectLibrary/Industry/Manufacturing/*.*" />
</fileset>
</UpdateMetadata>
<UpdateMetadata wlserver="fp" >
<fileset dir="${AIA_HOME}/AIAMetaData">
<include name="AIAComponents/EnterpriseObjectLibrary/Infrastructure/OAGIS90/*.*" />
</fileset>
</UpdateMetadata>
<UpdateMetadata wlserver="fp" >
<fileset dir="${AIA_HOME}/AIAMetaData">
<include name="AIAComponents/EnterpriseObjectLibrary/Infrastructure/Custom/V1/CustomMeta.xsd" />
</fileset>
</UpdateMetadata>
</Configurations>
</DeploymentPlan>
Thanks,
Dhiraj Mishra

Hi, I have the iphone 4 and I manually deleted all the voice memos on my iphone but they are still on my iphone when I open Itunes

Hi, I have the iphone 4 and I manually deleted all the voice memos on my iphone but they still appear on my iphone when I open Itunes on my computer and they still take up space. I am soon running out of space. Any ideas to permanantly get rid of some of the voice memos?
Am I the only one that really dislike the fact I cannot customize my iphone and cannot delete whatever files I want?
The only options i seem to have is to delete all my files WITHOUT a system restor because I tried doing a system restore and it puts back all my old files on my iphones.
I'm pretty desperate and any tips would help me a lot

If I understand you correctly, you purchased two albums directly from your iPhone and have successfully transferred the purchases to your iTunes library, but now you want to remove these two albums from your iPhone but having trouble, correct?
If so, you can manually delete the albums (song-by-song) by sliding your finger across each song's name, from left to right, then select the Delete button.
Or, while your iPhone is connected to iTunes click on the Music tab that you see in iTunes (where you specify what items to sync to your iPhone). At the bottom of that window (below Playlists, Genre, etc.) you'll see songs that are "manually" added to your iPhone, just un-check those and re-sync.

How do I manually delete iTunes when I want to re-install the latest program? Error says I have no permission so how can I get permission?

How do I manually delete iTunes and all its bits prior to re-installing the version 11 when I get a message saying I don't have permission.
I am the sole owner of my p.c. and nobody else uses it. How do I "get permission" from my own p.c.?
The p.c. is a Dell Vostro running windows 7 (64 bit) After giving up and exiting iTunes there was an error notification saying msvcr 80 is missing from your computer...Also, when I went (blindly) to administrators etc there was a red question mark against a gobbledegook long line apart from David pc which is me. Would this be some malevelant thing? Help!

Hi David,
Open the start menu, then select Control Panel in the right hand column. Open the Programs and Features section, type Apple in the search box at top right. You need to uninstall the components in the order suggested in the user tip.
Once all have been uninstalled reboot and use Windows Explorer to locate the named folders and delete them. Then reinstall.
tt2

When I logged on to itunes my daughters contacts uploaded to my iphone. We do not share the same itunes account. Does anyone know how to get rid of her contacts other then manually deleting them one by one?

When i logged onto my itunes account, my daughters contacts uploaded to my iphone. We do not share the same itunes account so i don't know how this happened. Does anyone know how to remove her contacts from my phone with out having to manually delete them one by one?

Apparently, you have set up the same iCloud account on both devices or you are syncing both devices under the same user ID on the same computer and have ended up syncing both of them with the same address book on the computer.

How do I get the music back on my iPhone after manually deleting it from the device (to get space for photos/videos)?

How do I get the music back on my iPhone after manually deleting it from the device (to get space for photos/videos)? I can sync with iTunes but it doesn't copy these songs back, even though they still appear in my iTunes library. I can click on the Music link under 'On My Device' in iTunes and the missing songs all appear to still be on the device, but they are not. I normally delete using iTunes and do not have this issue. This time I was out and needed more space to shoot photos and videos so I removed a lot of music from my phone through the Music App.

The songs I'm trying to reload on my phone are on my PC. These we had loaded into iTunes. I can remove them all from the library and then add them all back one by one I imagine. The problem I'm having is that I removed them manually from the phone, they still appear in iTunes music library yet they won't sync. I don't want to take the time to compare the phone to my library, remove from the library what's missing on the phone and then add them all back again. 64GB (mostly music) will take a while.

BW variable: Inconsistent in loading. please check use of deleted objects

Hi Experts,
I encountered an error and can not solve it following OSS note.
When I create a variable in query definition for an infoobject, it prompts an error dialog 'Inconsistent in loading. please check use of deleted objects'.
I checked the OSS notes 792779, there is a such description:
The variable existing in the table RSZGLOBV, but not existing in the tables RSZELTDIR or RSZCOMPDIR have inconsistent definition. These situation may return 2 different error messages. When a variable is missing in RSZELTDIR table (or in both together), an attempt to expand a list of variable under a corresponding InfoProvider or a list of text/formula variables will return a message 'Inconsistency in loading...'. All variables which are created for corresponding InfoProvider, text/formula variable are not available. When a variable is missing in the RSZCOMPDIR table only the error message is 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded' in Query Designer
But I checked these tables RSZGLOBV and RSZELTDIR and RSZCOMPDIR. I can find a variable for this infoobject, such as TC_SREG, in these tables. That is, this variable should be availbale in the query definition.
I don't know why.
My sap bw is 3.1, without the program 'ANALYZE_RSZ_TABLES'.
Many thanks for you help.

Hi,
While installing business content make grouping as Data Flow before and collection mode as 'Automatic'. Then expand the Tree in the tree you can see Info Object Catalogue. All installed and activated object will be in green (Active Mode). those will be normally unchecked to install anyway cross check and if found anything check deselect them. Go for Simulation Installation to identify unforeseen errors. Install the same and activate entire data-flow.
Hope your issue will be resolve
Thanks
BVR

How to manually delete and album from iPod Nano v 1.1.3

Dear Forum Members:
I want to manually delete an album or two from my iPod Nano. I am have trouble getting iTunes to sync as the sync button is grey in iTunes 11.3 (on XP OS / Desktop). I don't know how to delete an Album to free up space on iPod Nano either. I just want to occasionally swap out a CD from my iPod Nano (i.e., delete one Album, add one, and so on).
My iPod Nano is completely full and has no capacity to add new Albums, yet the iPod still works and I don't want to throw it away.
Please help!
Thanks,
CB

Hi cbbond,
It sounds like you want to remove some but not all of the music from your iPod nano. If you choose to Manually manage music and videos in iTunes, as shown in the article below, you can choose to delete specific albums and tracks from the device.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
If you're still unable to delete the specific album after setting up manual management, try restoring the iPod and syncing music to it again.
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
I hope this helps.
-Jason

PI 7.1 CTS+ - Manually deleted object in PRD system

Similar Messages

Maybe you are looking for