PI 7.1 ( EHP1 ) interoperability with SRM 5.0

Hi
We are upgrade our currently XI 3.0 ( SP23 ) to PI 7.1 EHP1 - and have a SRM environment ( using EBP component ) that is in version 5.0
We send POs from SRM -EBP component to XI -- which in turns routes it to vendors.
Does this version of SRM ( 5.0 ) work with PI 7.1 EHP1 ?

Hi ,
I very well understand what you say regarding pre-delivered content and setting up connectivity between SRM and XI .
Couple of questions :
1) When our XI environment is moved up to PI 7.1 , the existing contents for SRM in XI should be moved along to PI 7.1 , right ?
Then why do we need to re-import new contents from markeplace after we move to PI 7.1 ?

Similar Messages

Central contrcact distribution with WSRM with SRM 7.01 (EHP1)

Hi Gurus,
We are implementing Central contract distribution with SRM 7.01 and ECC 6 EHP 5 backends.
Can we use WSRM for Point-to-Point Communication for contract distribution? As the current customer does not have PI I am happy to avoid implementing PI.
Thanks in advance.

Hello Naveen,
Find the error details:
We have followed the steps for peer to peer service configuration as per note1268336 for synchronous service QUERYCODELIST for our XI independent scenario for contract management.
As per the steps for peer to peer for settings,we are done with the configuration in SRM side i.e. provider system and configured the QUERYCODELIST service.
Now while doing the same on ECC side(BDE) i.e. Consumer system when we are maintaining this service and creating Logical port,We get pop up to enter the details.
Once we enter the details and click on APPLY setting button we are getting this error which Muthu as mentioned.
"SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:404Connection Failed"
I have configured this in the past for some other project once where similar error(it was 402 or 403) was coming since WSDL node was not active under SRT in SRM but this time we have checked it and all the required services are also active.
Can you help to check further on this.
Regards.
Paresh.

What product to use with EHP1 FOR SAP SRM 7.0 JAVA System

Hello,
I install EHP1 FOR SAP SRM 7.0 JAVA system and now I what create this system in SAP Support Portal.
What product should I select: SAP SRM or SAP Netweaver?
If I select SAP SRM, in version I don't have option to select SRM 7.0 EHP1 and no Technical usage to select.
If I select SAP Netweaver, in version I have SAP Netweaver EHP2 and I can select Technical usage "Application server java" and "EP Core" but not SRM java.
In Solution Manager I have the same problem, what products shoul I select to create this system in SMSY?
This JAVA system is not in the same network so I don't know how to synchronize system data.
Best regards,
Filipe

Hello,
SAP told us to register the license of SAP SRM in ERP installation number only and when I am creating the SRM system in ERP installation number stuck in the same situaltion as it's not giving an option for SRM EHP1 and not sure what to select for the license and what in SMSY.
Regards
Saurabh Mishra

ERP release for Central Contract Management with SRM 7.0 EhP 1

Hi all,
i would like to have clarification with ERP and SRM release combinations regarding SRM 7.0 EhP1.
Indeed, the "Software Component Matrix for SAP SRM 7.0 EHP1", for Operational Contract Management, tells 'EHP 5 for SAP ERP 6.0 required'.
Moreover, in RKT dealing with SRM EhP1 delta overview, ERP 6.0 with EhP5 is mandatory for an upgrade to SRM7.01.
Nevertheless, i would like to have confirmation regarding this point.
We do not want to use PI to execute the Enterprise Services for CCM. So, we intend to switch BF SRM_WSRM_1 on.
But on the ERP side (EhP5), the only BF dealing with Contract Management is LOG_MM_P2PSE_2 which description is about Service Procurement (and more exactly for item hierarchies).
Does it mean we can use SRM 7.01 with ERP 6.0 EhP4 and without PI but only if we do not use Central Contracts with service hierarchies ?
Thank you for your help.
Regards.
Laurent.

Hi Laurent,
Yes.
When Central contract was designed in SRM 7.0 with ERP EhP4, it was designed with no service hierarchy. But in SRM 7.01 Central contral was enhanced to handle service hierarchy and it works with ERP EhP5. The problem is when we have SRM 7.01 and ERP EhP4. To handle this complication SRM 7.01 was designed to send flat service lines to EhP4 and lower release even though Central contract in SRM has service hierarchy. So while transfering to ERP EhP4 system in standard, all outlines are not consider for transfer and only service lines (Functional items) are transferred to ERP. To do so user needs to maintain the backend destination information of the connected backend system in table BBP_BACKEND_DEST via SM30 transaction with correct system type (for EhP4 system it will be ERP_4.0 and for EhP5 ERP_5.0). SAP Standard program checks this while XML generation for transfer and if system type is ERP_4.0 system it removes all outlines from temp table before generating the XML data. When it is done, ERP has only service lines in its XML and it does the manupulation to create the replication of central contract.
Master Guide (Including Upgrade Information) - SAP SRM 7.01 states:
"The use of SAP NetWeaver PI is optional but it is required for outbound XML-based messaging or for connecting non-SAP planning or execution systems."
So service hierarchy is possible in SRM 7.01 and ECC 6.04 but only with PI. For other CCM functionalities, SRM 7.01 and ECC 6.04 without PI works fine.
Best regards,
Christian Zeuch

Oracle 8.1.5 (6?) interoperability with Java/C++ clients and various ORBs

Hi
Machine/OS: SGI VWS 540, 256MB RAM, Win2000
Oracle: Oracle 8i (8.1.6)/Enterprise Edition Release 2
Problem:
I want to bind to a CORBA object (pureCORBA bank example) from c++.
I found in the FAQ an article about the interoperability with c++. I downloaded an archieve with all the necessary code. But....
I won't compile. It has been tested on Visibroker 3.2, but now i get compilation errors... (GIOP::ObjectKey CORBA::OctetSequence convertion).
Is there an update of this article that uses 8i 8.1.6 and Visibroker 3.4 (that ships with 8.1.6). I compile it using MS VC++ 6.0 SP 4.
I can make the current files compile, but then get a link error (login.lib uses stuff already defined in msvcrt.lib ....)
Thank you
Bart De Lathouwer

Hi
Machine/OS: SGI VWS 540, 256MB RAM, Win2000
Oracle: Oracle 8i (8.1.6)/Enterprise Edition Release 2
Problem:
I want to bind to a CORBA object (pureCORBA bank example) from c++.
I found in the FAQ an article about the interoperability with c++. I downloaded an archieve with all the necessary code. But....
I won't compile. It has been tested on Visibroker 3.2, but now i get compilation errors... (GIOP::ObjectKey CORBA::OctetSequence convertion).
Is there an update of this article that uses 8i 8.1.6 and Visibroker 3.4 (that ships with 8.1.6). I compile it using MS VC++ 6.0 SP 4.
I can make the current files compile, but then get a link error (login.lib uses stuff already defined in msvcrt.lib ....)
Thank you
Bart De Lathouwer

We work with SRM 5 Ext' Classic & report based on organization plan

Hello expert,
We work with SRM 5 Extended Classic scenario and BW for reports.
We have a lot of purchasing types and we need a good report that can give as a clear picture of the purchasing process according to the organization units (departments). We have one purchase organization and a lot of purchase groups, and the way that the system is built doesnu2019t support this requirement. We need a report that is based on the organization plan.
For example:
We need the option to extract all HR unit purchase documents or all direct supply goods that are purchased by the supply chain department. The report also needs to give a clear picture of the purchase operations and costs of every unit.
Thanks,
Gil

Closed but Unanswered

How to create a document with SRM BAPIS

Dear colleagues,
I have a problem with SRM BAPIs. I need to insert a pdf document into a record using SAP BAPIs, This document is already in a table in a binary format
I am trying with these BAPIs:
    1.
          CALL FUNCTION 'BAPI_SRM_DOC_CREATE'
              EXPORTING
                rms_id                  = rms_id
                sps_id                  = sps_id
                documentid              = documentid
                description             = 'DESCRIPTION'
                do_commit               = 'X'
                documentid_check_unique = 'X'
              IMPORTING
                return                  = return
                objectid                = objectid
                documentclass           = documentclass
              TABLES
                required_properties     = required_properties.
          This BAPI is working as expected. It returns objectid for the new document.
     2. Now I'm using BAPI_RECORD_ADDELEMENT:
             ls_doc_id-objectid = objectid.
            CLEAR: ls_sp_poid. " clear weg und ls_sp_poid clearen
            ls_sp_poid-name = 'DOC_ID'.
            ls_sp_poid-value = ls_doc_id.
            APPEND ls_sp_poid TO lt_sp_poid.
            CLEAR: ls_doc_id.
            ls_sp_poid-name = 'VARIANT'.
            ls_sp_poid-value = '0'.
            APPEND ls_sp_poid TO lt_sp_poid.
            CLEAR: ls_doc_id.
            ls_sp_poid-name = 'VERSION'.
            ls_sp_poid-value = '0'.
            APPEND ls_sp_poid TO lt_sp_poid.
            ls_insertion_by_anchor-anchor = 'DECRET'.
            ls_insertion_by_anchor-parent_node_id = '5'.
            ls_insertion_by_anchor-parent_node_attr_name = 'DECRETAT'.
            ls_insertion_by_anchor-parent_node_attr_value = '40'.
          CALL FUNCTION 'BAPI_RECORD_ADDELEMENT'
              EXPORTING
                objectid                    = zrm_attcab_scr-phio_id
                documentclass               = documentclass
                sps_id                      = 'ZRM_SPS_DOCVAR'
                anchor                      = 'DECRETS'
                description                 = 'Descripcion'
                store_as_new_version        = 'X' "Si X se crea vacio
*               STACKED                     = ''
*               DOC_CONTEXT                 =
                element_type                = 'I'
*                 insertion_by_anchor         = ls_insertion_by_anchor
*                insertion_by_modelid        = insertion_by_modelid
*               INSERTION_BY_REFERENCE_NODE =
*              ALL_SAME_NAME_ANCHOR        = 'X'
*               SET_ELEM_DESCR_HARD         = ' '
*                omit_authority_check        = 'X'
              IMPORTING
                return                      = ls_return
              TABLES
                element_sp_poid             = lt_sp_poid.
*             ELEMENT_PROPERTIES                =
*             ELEMENT_VISIBILITY                =
         This BAPI returns an internal error
Am I following the correct steps or am I skipping anything?
Could anyone help me?
Thanks in advance!!

I have the same problem!!!
Anyone knows?
Thanks!

MDM catalog integration with SRM 7.0

Hi all,
We will be upgrading from SRM 5.0 to SRM 7.0
We currently have CCM .....Few questins on catalog enablement for us with SRM 7:
1.With SRM 7,0,can we use CCM oor MDM is the only option???
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
5.What are additional features in SRM MDM 3.0 catalog in contrast to CCM??
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
9. Where can I find some sample catalog files for test upload?
10.What are the lastest SP for MDM available for integration with SRM 7.0??
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
I have gone through the help links but wud like ansers to above ques based on experiences of the forum members...Please provide inputs to my above queries if anybody has worked on MDM catalog integration with SRM 7.0....
Thanks for your time.

HI,
1.With SRM 7,0,can we use CCM oor MDM is the only option???
   You can use any catalogs which support SAP OCI interface.
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
   MDM Server(contents) and AS Java(for UI) are required. Please check the installation guide.
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
   Same as SRM 5.0. Define External Web Services.
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
Yes. You can use Import Manager. No issues.
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
MDM Extractor is available.
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
Mainly for contents mapping.
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
Any. Even for DB interface is also supported. You see all options when you run import manager.
9. Where can I find some sample catalog files for test upload?
Sample repository definition is delivered. You can manually create 1 entry by Data Manager.
10.What are the lastest SP for MDM available for integration with SRM 7.0??
You can find it SAP Service Marketplace. http://service.sap.com/swdc
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
You can use contract and contract items are transfered to Catalog.
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
Yes. Catalog is just Catalog.
Regards,
Masa

SRM 4.0 (with SRM Server 5.0) ---- XI 3.0-------R/3

Hello Friends
Iam also working in SRM. I want to integrate SRM and XI for sending a PO from SRM to third party system through XI. I already have a PO created in SRM and I want to send it through XI to Third party system and then want to create corresponding Sales Order in that system.
We are using SRM 4.0(with SRM Server5.0)and XI 3.0.
Thanks in Advance........

Hi <b>Narayana</b>!!
Treat SRM as another R/3 system and use the general flow logic. Create a Sender RFC to send the PO that you have created from SRM system using RFC sender adapter to XI.
Another way:
You can create a work flow which will trigger an IDOC once your PO is created and the IDOC will reach XI using ALE. You need to configure RFC destinations and partner Profiles etc.
Once your PO informations reaches XI you have to configure reciver adapter based on your third Party.
Lets say your third party system is a J2ee application or another R/3 system then you have to configure either a reciver http adapter or a Reciever RFC adapter.
I know this is quite generic......
Cheers!!
AnuraG

OpenText integration with SRM

Hi gurus, I am new here.
I have studied VIM (vendor invoice management) by Opentext by my own during a month, and I am going to start to implement it in a project but I need to integrate VIM with SRM.
I have searched for information but I haven't succeed.
Could you recommend me some web page or tutorial?
Thanks!

Hello,
Purchase Orders exist in ECC backend (as their SRM Confirmations being Goods Receipt in ECC).
Invoice is based on ECC data, that's why i say, for me, there is no link/integration between VIM and SRM: documents used by VIM are the ECC ones.
Regards.
Laurent.

SAP eSourcing with SRM Extended Classic Scenario

Hi Team,
We are using ECC 6.0 with eSourcing. Currently we use SRM 5.0 with Classic Scenario.
Now we are planning an upgrade from SRM 5.5 to SRM 7.0 and want to do the Extended Classic Scenario. This will help us to do additional functionalities of SRM.
eSourcing can be used for Strategic RFx and CLM functionalities.
SRM can be used for SC, Operational Sourcing and PO. We can also use the SRM-SUS Scenario for PO confirmation and Invoices.
Have any one used eSourcing with SRM Extended Classic? In that case, please provide some light into how to use all these application to better streamline the overall Source to Procure strategy.
Also, do you think Classic is the way to go or Extended Classic is better? Any documents or pictures are greatly appreciated.
Thanks
Jogy

Hi
SAP provide standard integration b/w ECC and Esourcing/ CLM (PR (both inbound and outbound). However in case you decide to go with extended classic scenario,you might need e Sourcing/ CLM integration with SRM (since PO would be created in SRM) which is not provided out of the box by SAP. However custom interface (based on flat file transfer) can be built b/w SAP SRM and e Sourcing.
MM-SUS scenario is not much different from EBP-SUS scenario in terms of functionality.
Regards
Mudit Saini

Integration of ECC 6.0 with SRM 5.0 SR2

Hi Guys,
Can any one please provide me with the steps for integrating ECC 6.0 with SRM 5.0 SR2.
Regards,
Max

Hi ,
Can anyone please let me know if any one has any kind of documentation on this.
Regards,
Max

Do not use Portal with SRM 7 ?

Hi experts
We use SRM 7.0 with SAP Entreprise Portal. We are in Support Package 5, we want to not use any more the Portal with SRM 7.
How to be able to not use Portal and only use SRM web client?
Thank you.
Regards,
Peggy.

Hi ,
Try to check this link hope it will be use full .
http://forums.sdn.sap.com/thread.jspa?threadID=2122248&messageID=11016445#11016445
Thanks & Regards
Pradeep Kumar Dondeti

Movilizer platform (Shopping cart mobile approval) integration with SRM 7

Dear All,
I am in need of integrating the Movilizer platform with SRM 7 for shopping cart mobile approval. The details about Movilizer can be found here. - Movilizer - The Movilizer for SAP Workflow
Could you please share me your experiences/pain points which need to taken care upon the time of implementation. Thanks in advance for your help.
Best Regards,
Bharathi

Dear All,
I have a development over here where the prerequisite of integrating the Movilizer platform with SRM 7 for shopping cart mobile approval is to check the function module on Remote-Enabled.
As of SAP enhancement package 2 for SAP Supplier Relationship Management 7.0 (SAP SRM 7.0), Changes have been made to some standard function modules so that they are no longer RFC-enabled.
Please refer the below link for your reference.
consolut - Changes to Standard RFC-Enabled Function Modules ( RELNSRM_702_RFC )
If the same function module is used by Movilizer and they are no longer RFC-enabled, please do check on that. I will keep you updated on our resolution.
Best Regards,
Bharathi

Linking of ECC vendor with SRM ROS supplier in EBP

Hello,
How can we link manualy created ECC vendor with SRM ROS supplier in EBP, I dont have PI system.
Thnks,
Raju

Raju the link is established basically (if i talk purely technical) in table VENMAP.
it has 3 fields...
partner guid| logical_system| vendor number(in logical system)
so here
partner_guid is the guid of the supplier in BUT000
log_sys is the logical system to which you want it to connect it to(in this case ECC logical system)
and vendor is the vendor number in that connecting logical system(means ecc vendor number)
so this creates the link.
but which version of SRM and SUS are you using?

PI 7.1 ( EHP1 ) interoperability with SRM 5.0

Similar Messages

Maybe you are looking for