PI 7.1 EHP1 SP3, Message Mapping cannot select object in the folder ?

Hi,
I am very new with PI 7.1 EHP1, i am not sure whether there is some new restriction or bug, because i was trying to create Data Type, Message Type in site the folder, but the Message Mapping cannot select those object insite the folder. The message mapping only can select those object without folder.
Please advise ?
Thank You and Best Regards
Fernand Lesmana

Hi Swarup,
I just finish installed the PI 7.1 EHP1 SP03, so i would like to test the functionality of the PI. just create 2 DT 2 MT insite the folder.
but when i am trying to create Message Mapping, the message mapping, i can't find these 2 MT ???.
after that i created new MT but outsite of the folder (still same namespaces) and the message mapping can see the MT ?
so i can make sure not duplication coz i just create those object.
any idea ?
Thank you and Best Regards
Fernand Lesmana

Similar Messages

Changing datatype, afterwards Message-Mapping cannot produce target element

Hi,
we use PI/700.
I changed a working system by changing a datatype of an existing message (adding a new element). My interface mapping contains two mappings: an XSL-Mapping and afterwards a Message-Mapping.
My interface mapping looks like this:
Message-Type A ->
XSL-Mapping ->
Message-Type B ->
Message-Mapping ->
Message-Type B
When I test each mapping alone everything works fine (with the new element I added).
But if I test my interface mapping in IBD with both mappings together, I'll get an error:
"Cannot produce target element /MT_EDM_OUTBOUND_LASTGANG_TO_SAP/LASTGANG/MASSEINHEIT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd".
Is it possible that XI has problems in refreshing the XSDs?
I tried this:
(1) I changed my Message-Mapping and now all elements are mapped 1:1 -> no success!
(2) Later I changed my Message-Mapping and build in "exists" with "if" to check whether the element "MASSEINHEIT" is generated by the XSL-Mapping -> It doesn't exists (??? - WHY? - when I test it, everything works fine)
(2) Afterwards I changed my interface mapping and take only the XSL-Mapping (without the following Message-Mapping) -> the element "MASSEINHEIT" exists now!
I'm totally confused!
Any ideas?
Regards
Wolfgang Hummel

Hi,
If you have made structural changes to the data type..such as number of fields have decreased/increased..or some new fld altogether, then you have to activate the datatype..goto message mapping and then re-do the mapping...but if you have made "typo" changes like names have been changed, etc..then i think it should be alrite..i have sometimes made changes to my datatype, but after activating it, i had to redo the mapping..that was it!...the rest would fall into place:) No changes had to be made in the interface mapping..
Regards,
Sushumna

BPM Message Mapping: "Cannot produce target element /ns1:BAPI...."

Hi,
A scenario File - BPM - BAPI call was developed, as described in blog 'RFC scenario using BPM' cfr. link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
The Mapping is as follows:
MT_EDB_MATERIAL_REQ (1:1) --> BAPI_MATERIAL_EXISTENCE_CHECK (1:1)
MATNR (1:1) -
> MATERIAL (1:1)
When executing the scenario, an error appears in the trace of SXMB_MONI, step 'Request Message Mapping'
Cannot produce target element /ns1:BAPI_MATERIAL_EXISTENCECHECK. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd....
I tried the following:
1) import the XML-file into the testmapping: executed successfully
File:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_EDB_MATERIAL_REQ xmlns:ns0="http://agfa.com/SD_EDB">
<MATNR>15P6X</MATNR>
</ns0:MT_EDB_MATERIAL_REQ>
2) Removed the mapping on node level and left mapping only on element level (material): same error
3) Activated the message mapping, interface mapping, determinations, etc again...:same error
4) Removed the Interface Mapping and created it again: same error
5) Compared the version ID of the Interface Mapping/message mapping in the Monitor trace with the version ID of the IR and saw that there was a difference.
After the CPA full cache, SXI_CACHE full refresh and object refresh in the IB Administration, the differences remain, and also the error....
Anybody an idea ?

Hi
>>>Cannot produce target element /ns1:BAPI_MATERIAL_EXISTENCECHECK. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd....
The error clearly says that one of the occurrence value for the target node mentioned is not coming from the source during mapping. The easiest way to solve the problem is as follows
<b>
First Execute the mapping as pointed out by "Raj" and the following steps.
</b>
1. Goto the Mapping Editor
2. Double click on the target node that is causing the problem here BAPI_MATERIAL_EXISTENCECHECK.
3. Right click on the same node and select "DisplayQueue".
4. View the Queue.
5. YOu will find "Suppress" entries, which means a value is expected but no value is coming in.
6.Go from right to left and check each node in the mapping and you will be able to trace where the suppress node comes from and take appropriate action
regards
krishna

TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Error message: iMovie cannot save changes to the library!?!

iMovie crashed my computer and now I can't creat a new movie.
Here's the full error message:
iMovie cannot save changes to the library.
The hard disk where your library is located may be full or unavailable or permissions may have changed. To avoid losing your work, quit iMovie.
What's up with this? I tried trashing the preferences, but got the same message. I have a 27-inch late 2013 iMac running Mavericks with 445.55 GB free space.
Please let me know if you have any suggestions.

You've already tried trashing iMovie preferences (By the way think in Mavericks you have to reboot as well after this for the new preferences to take effect) . One other thing to try is creating a new user account, logging in and seeing if you can create a new project in iMovie (of course you won't see your exisitng projects). If you can then iMovie itself is OK. If not then the only other thing I can think of is re-installing iMovie (see http://macs.about.com/od/usingyourmac/qt/How-To-Re-Download-Apps-From-The-Mac-Ap p-Store.htm)
Is everthing else working OK after your computer crash? Maybe you should also run Verify disk in Disk Utility.
Maybe someone-else has some other suggestions (I have not heard of this problem before)?
Geoff

Error message: iPod cannot be updated. The required file cannot be found.

Each time I sync my 5th generation iPod to my laptop and open iTunes, I get the message "iPod cannot be updated. The required file cannot be found." My husband already updated my iPod with the most current Updater (6/28/06). Any thoughts or suggestions?

After looking further into the archives, I got an answer to my question. There is a file called "iPod Photo Cache", located in the Pictures folder, that should be moved to Trash. Once done, the error message pops up no more!

How do I resolve itunes error message " ipod cannot be used because the apple mobile device service is not started"?

After I had Best Buy restore my ipod to factory settings, went to itunes from computer to restore my music. Getting the error message " Ipod cannot be used because the apple mobile device service is not started". Ipod is connected to Wi-Fi, connecting to itunes o.k. on ipod

http://support.apple.com/kb/TS1567
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Can't download music from PC to IPhone 5. Error message says "Cannot copy item. The device has either stopped responding or has been disconected. Help?

Can't download music from PC to IPhone 5. Error message says "Cannot copy item. The device has either stopped responding or has been disconected. But the phone is connected. Help!!

Hello iyurdin,
We've an article that can help keep your iPhone connected in Windows' eyes.
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Cheers,
Allen

When trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

when trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps. I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps. I updated the apps via iTunes and then synced again without an issue.
iPhone 4S / OSX 10.6.8 / iTunes 10.5.1

I am unable to move message it cannot be moved to the mailbox trash, why will it not delete my messgages

I am unable to move message it cannot be moved to the mailbox trash, why will it not delete my messages and how can I delete my messages

Hi Friend,
Do you set all the email information correctly?
Can you send/receive emails? If you are often receiving a message on the screen like "cannot contact the server...", check in Settings >> Mail, Contacts, Calendars >> "your name account", if all the fields are filled properly.
You must also turn off Restrictions in: Settings >> General >> Restrictions, because have an option " Allow Alterations - Accounts" that it maybe prevent alterations in your email account.
Hope it will be helpful

TS1503 when syncing my ipad I get the message 'iTunes cannot sync apps to the iPad "..." because the apps installed on the ipad could not be determined'; what does this mean?

when syncing my ipad I get the message 'iTunes cannot sync apps to the iPad "..." because the apps installed on the ipad could not be determined'; what does this mean?

I'm pretty sure it's a bug in either iOS 6 or iTunes 10.7. I kept getting it until I quit iTunes and re-ran it again. I then started sync from the iPad itself.

Error message: itunes cannot sync apps to the iPad because the apps installed on the ipad could not be detected

I received this message: "itunes cannot sync apps to the iPad because the apps installed on the ipad could not be detected" when trying to sync my ipad via usb with my windows PC - after the iPad applications failed to update when I selected 'Update All' in IOS6.

Disconnect and restart the computer and reset the iPad:
Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

I keep getting the message "ipod cannot be used because the apple mobile device servies is not started" message when I try to sync my itouch to my itunes library from desktop computer

I keep getting the message "iod cannot be used because the apple mobile device service is not started" when i try to sync my ipod to my desktop itunes library.

See:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

While syncing, I got this message: "iTunes cannot sync apps to the iPad "temp's iPad" because the apps installed on the iPad could not be determined" What does this mean and what should I do?

While syncing, I got this message: "iTunes cannot sync apps to the iPad “temp’s iPad” because the apps installed on the iPad could not be determined" What does this mean and what should I do?

Based on an online post, I tried the following and it worked for me:
1. Windows 7: Control panel > Device Manager
2. Right click my PC's name > "scan for hardware changes"
3. Restart iTunes
4. Restart IPad
5. Connect IPad
6. Still I got the same error
7. Restart iTunes
8. Restart IPad
9. Connect IPad
10. It worked and I was able to sync the apps!!
Prior to this I had removed few apps, not sure that was a trigger.
System: IPad 1, IOS 5.x

After trying to restore from time capsule, I get the following message when I try to access the folder "data." The folder "Data" can't be opened because you don't have permission to see its contents. Any ideas?

after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents." Any ideas?

Are you restoring from a TM backup??
Check the methods Pondini outlines to do restore.
Q14-17
http://pondini.org/TM/FAQ.html

PI 7.1 EHP1 SP3, Message Mapping cannot select object in the folder ?

Similar Messages

Maybe you are looking for