PI 7.1 - Operation Mapping stays blank after applying a value

Hello,
I am trying to recreate an interface that I had in XI 3.0 in my development PI 7.1 system.  But every time I try to add an Operation Mapping (Interface Mapping in XI 3.0) it shows me a "value list" I select the correct mapping and then hit accept.  But the operation mapping does not appear and there is no error message telling me anything. 
I'm having a look at installing patch 1307777 but I'm not too confident that is the issue because although one of my mappings is a split mapping the others are not.
Any ideas?
Thanks,
Matt

Hello Matt,
I was facing the same problem. I can sugest you temporary suggestion, Like  goto Interface determination - > From where you select the OM just right click on the square then select Input Help ->  value list from there it will show the selected OM and you can see that in column.
PLease verify and let me know if this works or not.
Edited by: Siddhesh Pathak on Apr 13, 2009 4:45 PM

Similar Messages

  • I have a used i phone sync it up i get every thing contacts pitchers but the apps will not load or stay on after applying

    i have a used i phone 3g when i sync it up i get my old contacts and pitchers old text and phone calls but the apps will not stay after applying can someone help me

    What version of iOS is the device running?
    Is the issue with specific apps or all apps? 
    What version of iOS do the apps require?  Some, possibly all, may require a newer version of iOS than the device is capable of running.

  • When I try to log in to a site i trust, the page just stays blank after i enter password and hit enter?

    I am on a website and can move around but when I try to log into my account I put the password in and hit enter. The page then just stays white and doesn't load. Could this be an issue with the settings I have in Mozilla? IE brower works fine

    Try loging in manually instead of using the saved details. Review the saved details do they seem correct ?
    * see [[username and password not remembered]]
    * and [[how do i make firefox remember my usernames and passwords?]]

  • DB02 blank after applying SP13

    Hi,
    After going for SP 13 (ABAP & Basis) on NW04s, we are not able to view any data in DB02.
    DB13 is working fine as part of the DBA Cockpit.
    Pls. help.
    Thanks,
    Saba.

    Hello Sumanth,
                             Please refer to this note - 1028624.
    Sai Kondapi

  • PO7.31 and BPM: Using Operation Mapping within BPM

    Hello everyone!
    I am facing an issue while trying the import/execute an Operation Mapping within a BPM. Have a PO 7.31SP07 installation (NWDS also on 7.31 SP07), and the process already have some working interface calls to PI, however still having issue while trying to execute the Operation Mapping:
    1. After deploying the process, going to NWA -> SOA tab -> Application and Scenario Communication -> Application Communication -> select the process -> check the "localhost"/WS group for "Local System". The  "Processing State" shows the error below:
    Configuration for service group [localhost] failed. Error details:
    [No endpoints found. Check if the service is configured and if its
    endpoints are available in the . Service:
    [{http://fusionconsultoria.com.br/sales_order_create}fusionconsultoria_salesord_om_SalesOrderSplit_ServicePortType]
    Assigned Provider: [Local System]
    Service Group: [localhost]
    Service Group application: [fusionconsultoria/salesord]
    Service Reference application: [fusionconsultoria/salesord]
    2. During runtime, when trying to execute the OM automated step, on log viewer:
    Error during SCA Processing
    [EXCEPTION]
    com.sap.engine.interfaces.sca.config.exception.ESBConfigurationException:
    Could not process message for operation om_SalesOrderSplit_Service in
    web service plugin module.
    at com.sap.engine.services.sca.plugins.ws.WebServiceImplementationInstance.accept(WebServiceImplementationInstance.java:223)
    at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:314)
    Caused by: com.sap.esi.esp.lib.mm.config.exceptions.ObjectNotExistsException:
    Configuration not found for application:
    fusionconsultoria/salesord,serviceRefId:{http://www.sap.com}salesord_fusionconsultoria~salesord~BPMcomponent_29768b4e-f59a-4ba3-a2ff-dee594b01ecf_WS.
    Please check the configuration details from the NWA. You may have not
    assigned the Service Group to a Provider System, or the generation of
    the configuration has failed.
    3. Carried out the steps from the referenced links below. They are quite similar to each other, however still facing the issue:
    Reuse PI Operation Mapping as a service in SAP NetWeaver BPM
    Using Operation Mappings (PI) in a BPM Process - Process Orchestration - SAP Library
    Using NetWeaver PI’s Mapping in NetWeaver BPM
    - Marked as "local provider" and WS;
    4. Tried deleting, creating the automated step aswell reimporting the Operation Mapping.
    5. Already reviewed the input/output mapping of the automated activity;
    6. On ESR, the mapping works correctly.
    7. Tried changing the outbound and inbound Service interfaces for the OM from stateless to stateless XI3.0, as well from synchronous to asynchronous.
    At this moment I've completely ran out of ideas. Appreciate if anyone could give any insights, since I am running out of time with this project!
    Thanks in advance to all and
    Best regards,
    Lucas Santos

    Hi Lucus
    I'm facing the same type of problem.
    Why would re-creating the BPM fix this issue ?.    I fear I would spend all this effort for nothing.
    What does your operation mapping wsdl:service > soap:address look like ?   What does your NWA BPM application Communication Configuration look like now - before you had that red light - like I have now.  
    The WSDL that is generated from the imported Operation Mapping : what end point is expected here. My wsdl:service > soap:address location has a port of 50500 - which does not even exist!. How can it work  Does this get automatically deployed onto the Service Registry?.
    I have built and deployed this but I get a run time error when it executes the operation mapping.   A technical error during invocation: Could not invoke service reference name.
    I have seen in the deployed BPM's Application Configuration against the Consumed Service Groups an error against the associated service group
    Configuration for service
    group [SG_localhost] failed. Error details: [No endpoints found. Check if the  service is configured and if its endpoints are available in the . Service
    It almost seems that it wants me to publish the end point on the service registry -  no idea how....but I none of the blogs and post indicate that I need to fiddle with this at all.
    I have this question in SDN too if you care to take a look.

  • Creative cloud mobile app, remains blank after logging in

    Creative cloud app on my macbook working fine, installed creative cloud mobile app on my iPhone 6 but all windows stay blank after i have logged in, any advise on how to resolve this? Btw i have the photography package subscription.

    Hi Frans,
    The Creative Cloud requires the iOS 8.01 and later. Have you tried to reinstall the software yet?
    Have you tried to see if the Lightroom Mobile app works? Try installing it and log in
    Scott

  • WLAN/Wap stays on after sync or web/maps use, does...

    my wlan/wap connection always stays on after a mail for exchange sync or even just web browsing.  Is this a bug or a feature?  It never seems to turn off and I have to do this manually after each sync of email or use of interweb.  thanks David

    As said above, you can set the phone to prompt when it wants to go onto the internet.
    You can also download "AutoDisconnect" from Maemo Extras (or Dev) which can kill the connection if it is idle for a set time etc.
    If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
    If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

  • Every time I open Mail it fails to respond, the windows stay blank and I get the beach ball and can only close it by force closing. Any ideas?

    Every time I open Mail on my Macbook Pro, which is only a couple of weeks old, it fails to open, the windows stay blank and I get the beach ball. The only way I can get it to close is to force it using the command alt esc buttons. Any ideas?

    Hi Elijahcross,
    If you are having issues with iTunes freezing shortly after opening, you may find the troubleshooting in the following article helpful:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Regards,
    - Brenden

  • Error in operation mapping

    I have been receiving an error when I try to test the operation mapping, regarding the attribute "schemaLocation".
    This error occurs after importing an xsd file which name contains character "." (dot). No error message if I substitute the
    character "." by "_" (underscore). Removing the attribute "schemaLocation" from the xsd file and keeping the "." within the xsd name file, no error occurs launching the test.
    Any help will be well appreciated.
    Many thanks in advance for your kind support.
    Regards,
       Giovanni

    Hi
    Refresh CPA cache using user PIDIRUSER.
    Look Note 951318 for Mapping Cache Refresh.

  • Please Help : Iphone 5 built in maps app blank issues

    My built in map application doesnt work. I see the blue dot updating my location, but doesnt show any maps. Just a blank screen. I can pull directions and turn by turn navigation. Everything works but the road/street maps is blank. Does anyone know a fix to this problem? Its soo weird its like after i updated to the new firmware it stopped working.

    Thanks PJL123, I honestly didn't even know that was available. I did it and it looked like all my apps were in that task bar. So, I cleared it and rebooted. Unfortunately the Maps App has the same issue. Thanks much for teh suggestion. I'm sure that memory was bogged down with all the apps in residence.
    gary

  • My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
    Very frustrating, hope someone else has some ideas!
    PS My MacBook was about same age, and "expired" in exactly the same way as yours.

  • Screen goes blank after 10 secs when i access hotmail

    my screen has been going blank after 19 secs when I open Hotmail or the farmville game. The audio however is fine but the screen turns blank (grey).
    This problem started after I downloaded IOS 5 for my iPad on the imac and then synchronised my itunes from iMac to iPad. I alsoactivated i Cloud.

    Yeah, I think it must just be an insanely infrequent occurrence, since no one on here has replied in a couple days besides you. I know the screen is supposed to stay on the entire time that there is an incoming call from the lock screen now, since I had a chance to ask a few friends that just got iphones as well. I'm thinking a restore would fix the problem, although I think I'm just going to wait until there is an update, which I would assume would be soon, before I do the restore, since its just an annoyance and not a problem.

  • Operation Mapping Error

    Hi Gurus,
    Anyone familiar with the error below? this occur during the test configuration in integration builder (integration directory)
    "Operation Mapping
    OM_DESADV_DELVRY03_ZDELVR0X_TO_ED_InterfaceToConex
    Runtime error
    Runtime exception occurred during application mapping com/sap/xi/tf/_MM_DESADV_DELVRY03_ZDELVR0X_TO_ED_~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:The processing instruction target matching "[xX][mM][lL]" is not allowed."
    Thanks

    Hi,
    Quoting XML Bible:
    The first line is the XML declaration:
    <?xml version=u201D1.0u201D standalone=u201Dyesu201D?>
    This is an example of an XML processing instruction. Processing instructions begin
    with <? And end with ?>. The first word after the <? is the name of the processing
    instruction, which is xml in this example.
    So that means, in your Operation Mapping, you are using "xXmMlL" which is not a processing instruction that is known e.g XSLT, CSS, HTML or XML
    Hope this helps,
    Mark

  • Stateless ejb staying live after a garbage collector

    Hi,
    I use an aplication based in struts, in the actions i call session that call cmps, both ejb are stateless.
    Every thing works fine until i make some stress test, when i find that the server (Websphere) stay out of memory. After this i found that my sessions and cmps are staying live after the garbage collector run and i don't know why because the thread already finish and the ejb are stateless.
    Anyone already have this problem, how can i clear the memory of this objects?
    Thanks in advanced
    Ricardo

    Adjust the size of your EJB pool. Just because your application is no longer using the objects doesn't mean that the container won't hang on to them for re-use (object creation is an "expensive" operation).

  • Hotmail sign in page stays blank. Every other web site loads ok.

    The hotmail " sign in " page stays blank. All other web sites i go to load just fine. My security settings are set to "permanent private browsing mode" I have emptied cookies, the cache, have even tried safe mode, nothing seems to work. Previous versions of firefox have same problem. This is a NEW problem since firefox 4 upgrade. I have to use IE to access my email account which is really annoying. Can anyone help? It IS a firefox related problem because IE works just fine.

    Finally figured this one out. Thanks to everyone who answers questions in this forum. After looking at all kinds of similar troubles finally found out what was wrong. IT WASN'T A FIREFOX PROBLEM. I had to adjust the date and time ( right click on the bottom right of the screen on the time, select: adjust date/time and , well adjust the time or date. ) It fixed everything including the warnings I used to get that the site I was visiting was not to be trusted. Thanks to everyone. Keep up the good work.

Maybe you are looking for

  • Access external hard drive connected to Airport Extreme USB via Windows & Mac

    I have an Airport Extreme and I would like to connect an external hard drive to it via USB so that I can backup pictures, music, documents etc. I need to be able to see the external hard drive from my windows PC. I eventually will be buying a Mac so

  • Dashboard group - dropdown menu

    hello Can someone please help me with following problem? I went throu this forum,found some hints,but still dont know how to achieve this : how to set up dashboard group? Lets say : group A - dash1 - dash2 group B - dash3 - dash4 with dropdown appear

  • To add a string object to a list

    hi all, i am trying a string object usind add method like String s="xyz"; list.add(s) when i try to compile the code it says that the code contains an unchecked exception..please tell me how to handle this exception.....like if its not the correct wa

  • Data selection from Table

    Hi , My requirement is to have Commercial Documents which are not Accounted. So that I've used the following logic.   SELECT a~vbeln                  a~vbtyp                  a~fkdat                  a~bukrs          a~kunrg          SUM( b~netwr )  

  • Why can't I open some "XLS" files

    Now that I have "Lion" loaded on my computer, I have encountered many XLS files I can no longer open.  I receive a message stating my file "may be a read-only file or I may be trying to access a read-only location"   Why is this happening?