PI 7.1/RWB/Component/Monitoring/Adapter Engine/Test Message/403 Forbidden

Hello guys!
During performing PI 7.1 Readiness Check I have to perform a test message under Runtime Workbench\Adapter Engine\Test Message.
After processing i receive following error:
Error while sending message: 403 Forbidden.
Does anybody know the cause?
Many thanks in advance!
Jochen

Hi Sreeni!
Direct hit!
This was the problem! Missing role!
Many thanks to you!
Additional Information for all:
Readiness Check (PDF)
A compilaton of simple and advanced checks for Process Integration 7.1 (PI 7.1)
Page 44
SAP Note 817920 - XI Readiness Check 3.0/7.0, 7.1
Regards,
Jochen

Similar Messages

Error in RWB - Component Monitoring - Adapter Engine

Hi,
After we install an Additional Application Server Instance, we are facing an issue with the Runtime Workbench, specifically with the Adapter Engine status.
On the RWB we're have this error:
Ping Status: Unable to establish connection to
"http://<Additional AS Host>:<Central Instance JAVA Port>/AdapterFramework/rtc"
All the time it's pointing to the Additional AS with the Primary AS Java Port.
We are using a central SLD in PIP system.
We already reviewed, the point 8.12 of the "SAP NetWeaver PI 7.1 Including SAP EHP 1 - Troubleshooting Guide"
Any idea to solve this?
Regards,
GCC PI

Hi GCC,
Please change in the http://<host>:<j2ee_port>/exchangeProfile this settings:
Exchange Profile
Connections:
- com.sap.aii.connect.directory.name
- com.sap.aii.connect.landscape.name
- com.sap.aii.connect.repository.name
RuntimeWorkbench:
- com.sap.aii.rwb.server.centralmonitoring.r3.ashost
Please change the value in the:
Config Tool -> cluster-data -> Global Server -> Configuration ->
Services -> com.sap.aii.af.cpa.svc ->
   SLD.selfregistration.hostName
   SLD.selfregistration.httpPort
   SLD.selfregistration.httspPort
Also see notes: #1113161 - Links in Component Monitoring not working
and #764176 - Error in XI due to inconsistent SLD contents
After that, please restart the j2ee engine.
Regards,
Luis Diego

In RWB----component monitoring --adapter engine-- status

Hi ,
In the Runtime work bench component monitoring if we click on adapter engine we get two tabls
CCMS Status: Last Retry Jan 26, 2011 1:55:15 PM CET Ping and Self-Test Help
Ping Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... Details
Self-Test Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... Details

Hi Sandeep,
Besides updating the patch level to the latest and ensure the SP are in the same level, the notes I would recommend would be:
#1285224 - Http 404 error in details display for Adapter Engine
#804124 - HTTP communication with XI Adapter Engine fails (this one you have already mentioned)
Hope it helps too
Regards,
Caio

RWB - Component Monitoring - Integration Engines = none ???

Hi.
I made a Business System in SLD.
Name: DEV_410
Role: Application System
Related Integration Server: XHD_100       (XI Server)
Technical System: DEV on dev60           (type: Web AS ABAP)
Client: 410 of DEV
Logical System Name: HMXDEV410
But I cant see the business system in RWB - Component Monitoring - Integration Engines. There shoud be 'Proxy Runtime DEV_410' in Integration Engines, I think.
Is there any wrong in SLD or RWB?
Thanks in advance.
sjyoon.

Hi
Go to SLD select your business system :DEV_410
And check the following entries for your business system
Role:   Application Server
Related Integration Server : (Check if this value correctly configured to your Integration Server client)
If this configuration is correct, this means XIRWBUSER is able to connect to the proxy runtime of application systems(DEV_410). Then there will be no entries displayed under RWB - Component Monitoring - Integration Engines in RWB.( that is how my RWB component monitoring is configured)
Only error entries are displayed under RWB - Component Monitoring - Integration Engines in RWB. Say for example XIRWBUSER is not able to connect to the proxy runtime of application systems(DEV_410). Then you see a entry in RED below your RWB - Component Monitoring - Integration Engines
Satish

Component monitoring - adapter engine error, but no channel in error actual

Hi,
We have a problem in displaying a status of Adapter Engine in RWB. In component monitoring there's a red light and the status - "Are communication channels without errors?" says there's an communication channel in error. But when I click the Communication channel monitoring, everything's green there. Yes, there was an error before, but it's ok now. Why is the AE item in Component monitoring still red? How to make it to reflect the current status?
Thank you,
Olian

Hi Olian,
i am saying to use the cache connectivity test button option from RWB -> compnent monitoring , so have you done cache test using this? if yes, click on refresh display to see the latest adapter engine status..............if it is green, then it is okay..............but if it is red here, it means some comm channel is erroring sometimes - i guess it can be a file adapter using ftp or some rfc adapter......................
if it is green here and compnent monitoring - adapter engine status is red because some comm channel errored in past.........then i think some cache is not getting refreshed - i do not know exactly how to rectify it...........but i can tell you some workaround for it..............the comm channel which was erroring just stop it from comm channel monitoring........then close RWB and again open it and see compnent monitoring - adapter engine status again in it - i think it should be green now.......or try by changing any comm channel description data in ID and save and activate it.........then again check your compnent monitoring - adapter engine status..................but dont worry i think this is a temporary problem
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Mar 26, 2008 11:50 AM

RWB-Mesg Monitoring-Adapter Engine-Message Retention is only 1or2 days

Hello Experts,
I have a an Integrated Scenario, SOAP to RFC, in my landscape. As you know I can only monitor messages for an Integrated Scenario in Runtime Workbench -> Message Monitoring -> Adapter Engine. So, when I find my message related to the Integrated Scenario and click on "Message Details" I am not able to view the payload for any of these messages. I am sure there is somewhere on the Java stack flip the switch to view payload but not sure where. Any kind of help would be greatly appreciated.
Thank you!!

Please follow steps as below...
1. Open http://server.domain.ext:5XX00/dir/start/index.jsp (Please modify according to your server name, domain URL and Port)
2. Navigate and open Runtime Workbench after you log on
3. Navigate and open Message Monitoring
4. Select appropriate Messages from Component: and From
5. You will able to see Refresh button then | View: and Time:
5. Drop down Time: and you will able to do selection there Hourly, Daily, Weekly, Monthly and Yearly...
Please let me know if you have any other question.
Regards,
Yogesh Patel

RWB Component Monitoring - Cache Connectivity Test failure

Hi,
I have done the Cache Connectivity test in RWB-Component monitoring.
For the Integration Server - Integration Engine XYZ.
I am getting error
Result of Self-Test
   Can the SLD be reached?   ... Details OK
   Does the Integration Engine know the business system?   ... Details   OK
   Are roles in SXMS_CONF_ITEMS and SLD consistent?   ... Details Error
   Is Web service security available?   ... Details
The error message os
Details for 'Are roles in SXMS_CONF_ITEMS and SLD consistent?'
Inconsistent roles. System Landscape: Integration Server. SXMSGLOBAL: Application System
How to solve this issue.
Regards
Farhat

Hi
Use Tcode SXMB_ADM -> integration engine ,Assign proper Client to Integration Server.
look this similar thread
Are roles in SXMS_CONF_ITEMS and SLD consistent?

Under Adapter engine Test buttion option

Hi Gurus,
I Have small doubt we have option like Test message at RWB
RWB--->COMPONENT MONITORING--->Adapter engine --->Test message ,what is the purpose of this test message option at Adapter engine.
It is same as sending data from Integration engine if so when ever we are sending data from AE we are getting some issue .Can any body clarify this.
Thanks
Madhu

Hi Madhu,
Check out the below thread:
https://scn.sap.com/thread/1402225
You can also check out this excellent blog for extra information:
http://scn.sap.com/community/pi-and-soa-middleware/blog/2014/02/17/howto--send-test-messages-to-the-adapter-engine-to-an-integrated-configuration
Regards
Bikash

Adapter Engine link disapperead from RWB - component monitoring screen

Hi.
I restarted PI.
After that, the "adpter engine" line (link) disapperead from the page RWB - component monitoring.
PI is running, it is exchanging data with Ecc and Thirdy Party systems.
How to solve the problem ?
To arrive to "defective" screen:
http://host:5xx00/rwb/index.jsp --> component monitoring --> component with status all --> display
Under domain xx, under integration server, there is no adapter engine line/link
Thanks !

HI,
Check in SLD-> content maintenence-> XI adapter framework is registered or not...
If not thn register by performing the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
(application view), stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.
have a look on this...
PI 7.1: Problem with SLD configuration: Cannot find central Adapter Engine
Regds,
Pinangshuk.

CC problem in RWB Component monitoring

Hi people
i am getting this error in RWB component monitoring
1 communication channels have an error status0 communication channels inactive0 communication channels not providing any status information0 adapters logging communication-channel-independent processing errors
But sender&receiver CC are STATE is ACTIVE status
Adapter Engine Server is RED mark
All object's r correct
PLS send me to ASAP
Thanks & Regards
shekar

Hi There,
It saying that one of you CC in error and remaing things are ok.
As you saying everything ok..then check the short log of the error CC ..that text give you an idea..
the error may be occured some time back but it is still showing erro ..but everything works fine...
Regards
Rao

Error in RWB Component Monitoring ... "Domain ???"

Hello Everyone!
A problem suddenly popped up in our SLD. When I navigate to RWB > Component Monitoring... I can no longer click on the "Integration Server" The Domain shows <i>"Domain ???"</i> would anyone know what could be the problem?
Warm regards,
Glenn

Hi Glenn,
Please check your BS for the XI in the SLD and verify you have specified the pipeline url properly:
http://<host>:<port>/sap/xi/engine?type=entry
you can find the http port in SMICM --> GOTO-> SERVICES
In addition to that Verify (in XI) SXMB_ADM --> IE config --> IS URL.
you should have the same url here.
Hope it helps..
Kumar.S
Message was edited by:
Kumar.S
Kumar.S.V

PI 7.1 - Message Monitoring - Adapter Engine (Database Overview)

Hi Friends,
In Message Monitoring --> Adapter Engine --> Database (Overview) is not working. It throws the following error message.
no_connection Exception Message: RemoteException in Method: CentralViewManager: getIProfiles( IApplication, boolean ). Communication-related failure. Message: java.rmi.RemoteException: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: An error occured while reading data from the destination sap.com/com.sap.aii.af.service.profile.proxy/com.sap.aii.af.service.statistic.proxy.ProfileProcessor/basicPort_Document. The error was: com.sap.security.core.server.destinations.api.DestinationException An error occurred while reading the destination sap.com/com.sap.aii.af.service.profile.proxy/com.sap.aii.af.service.statistic.proxy.ProfileProcessor/basicPort_Document, type WebService. The error was Internal error during the decryption process...
But, Adapter Engine --> Database option is working. What could be the problem ?
Kindly clarify, friends.
Kind regards,
Jegathees P.

Hello friend,
May be it is related with connection problem check with your basis people .
Regards,
Ravi.

Message flow between advanced adapter engine and messaging system for ICO scenarios

Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472    Information    MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472    Information    Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.499    Information    Message successfully put into the queue
12/08/2014 09:26:06.499    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499    Information    The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500    Information    HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.501    Information    Message status set to DLNG
12/08/2014 09:26:06.513    Information    Message successfully put into the queue
12/08/2014 09:26:06.513    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515    Information    Message status set to DLNG
12/08/2014 09:26:06.533    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.548    Information    Message successfully put into the queue
12/08/2014 09:26:06.548    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550    Information    Message status set to DLNG
12/08/2014 09:26:06.551    Information    Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.571    Information    Message successfully put into the queue
12/08/2014 09:26:06.571    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.573    Information    Message status set to DLNG
12/08/2014 09:26:06.580    Information    Message successfully put into the queue
12/08/2014 09:26:06.580    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582    Information    Message status set to DLNG
12/08/2014 09:26:06.583    Information    Delivering to channel: IDOC_R
12/08/2014 09:26:06.583    Information    MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583    Information    XI message received for processing
12/08/2014 09:26:06.587    Information    Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588    Information    IDOC metadata repository is RXX
12/08/2014 09:26:06.589    Information    Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590    Information    XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595    Information    Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813    Information    IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817    Information    TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819    Information    Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821    Information    Message status set to DLVD
Thanks & regards
Dingjun

Hello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari.

SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
André

Hi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André

Adapter Engine Error Message on RWB

Hello
We are getting an Red color error message on Adapter engine on RWB
monitoring ---> Component Monitoring.
Here is the error message:
SLD access SLD host:port = sap03:50000
Error getting JPR configuration from SLD. Exception: No entity of class
SAP_BusinessSystem for XID.SystemHome.sap03 found
No access to get JPR configuration
Please advise for solving the error message on adapter engine.
Thanks & regards
AK
SAP Version : NW04 (XI 3.0) SP20

Hi Senthil,
As suggested by others there is no problem with your communication channels ,,, the problem you face is because Your DBA has initiated the SHUTDOWN IMMEDIATE command. This will shutdown Oracle and terminate all active operations.
Please tell him to start the services and Wait until Oracle has been restarted by your DBA.
Regards
joel

PI 7.1/RWB/Component/Monitoring/Adapter Engine/Test Message/403 Forbidden

Similar Messages

Maybe you are looking for