PI 7.1 scenario -- File to File , File to IDOC and IDoc to File Scenario

Hi All,
*I have PI 7.0 . I have in that File to File , File to IDOC and IDoc to File Scenarios*
File to File -- This scenario is working fine.
File to IDOC -- Setting done in PI 7.0 like SM59, IDXI, IDX2 and in R/3 like SALE (logical system)--- This scenario is working fine.
IDoc to File -- Seeting done in R/3 like SALE (Logical system, Distrubtion Model (Port, Partner Profile)) -- This scenario is working fine.
Now I need to move to PI 7.1 -- for File to File , File to IDOC and IDoc to File Scenarios.
Please let me know do I require to make any changes in Design and Configuration and settings in PI 7.1 and R/3 for above scenarios or it will work fine as it is already working for PI 7.0
If changes are required please let me know what changes to do for each scaenario and pls also send blogs for that.
Regards

>
Rickkk wrote:
> Hi,
>
> Idoc metadeta is updated through idx2?
>
> Regards
If there is no metadata maintained for an idoc type, the metadata for that idoc type gets loaded when an idoc of that type is received by PI for the first time. If you are looking at loading metadata of all idoc types before the first run, its really not required. Just make sure that the port is configured properly. Although, there is no harm in preloading the metadata using IDX2.
You need to use IDX2 mandatorily when the the metadata changes and the metadata in ECC and PI is different. In that case, you need to delete metadata for the changed IDoc type and then either you can update the metada through IDX2 or let the system take care of.

Similar Messages

Pass through scenario in SAP PI with no mapping for File to IDoc and Idoc to file scenarios

Hi Experts,
Can i have step by step process in SAP PI for pass through scenario with no mapping in case of file to Idoc and Idoc to file both cases please.
What objects i can skip.
My PI system is 7.3 dual stack.
I have seen below blogs, still its confusing to me.
When and how to create an scenario in SAP PI without mapping objects.
Pass Through Scenario with no Mapping in PI 7.1
Appreciate your help on this.
Regards,
Mohan.

Hi Mohan
In pass thru interface you don't need to create any ESR objects, only ID objects are required.
Just Create a Receiver Determination and Receiver Agreement for your scenario (no need for Interface Det. and Sender Agreement).
Specify the IDOC in the Sender Interface and namespace as urn:sap-com:document:sap:idoc:messages
Or instead of creating objects manually, Run the wizard with Idoc name/namespace in sender/receiver interface
Regards
Osman

Upload cap file by net on client card, and protect cap file. Encode cap?

How upload cap file by internet on client card, and protect cap file. Encode cap file?
cap file > Server (keys) --> internet --> Client Program --> JCOP10 card
Can I use secure channel protocol ? How ?

Thanks for response.
Problem for me is communication between client program(computer) -> reader -> card.
The cap file is in Bin format.
Transmission can by easy scanned. How to protect this step of upload process?.
Internet is no problem.
My English is pure, and I have problem to understand specification.
Can I upload, install cap file encoded by Secure Channel Protocol '02' ?
If yes, then some example, log file can help me understand how to do this and how build APDU commend. I Use my program (Delphi) to communicate with reader and card.

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

I can't get CS6 to recognize R3D files. I put the plugin and the server files in the proper spot and I used 64 not 32 like it said. I still can't get it to work

The only thing to do to get the R3D files working is download a plugin pack with 2 files in it. one goes in your plugin folder the other in some other folder. I found both original files and replaced them with the new ones. I have rebooted twice... nothing. it won't recognize R3D files. The Camera is a Red brand Epic Dragon and it puts our R3D files. R3D's are easily manipulated in Redcine, but I can't add my .mov files on it so I need to be able to work with these files in PP.

I'm sad now
Good thing I have a PC with 32-bit windows!
Now, I can only assume apple is working on a 64-bit
fix? I suppose that info/ETA is on the itunes page,
I'll go take a look.
Who knows what Apple plans are? I do know that they do not discuss upcoming releases of anything until its available.

I want to read a file which is in a zip and this zip file is at ftp site

i am facing this problem and try to find the solution from last month please help me
i want to read a file which in ziped and this zip file is at ftp site. and i want to read this file without downloading this zip file to local machine. i have to read it from ftp location only

You can open an URLConnection to a file on an FTP server (search this forum to find out how). You can get the InputStream from the URLConnection and feed it to ZipInputStream. That should do the job.

HT3847 Using 'Grand Perspective' to see my files, I have both iTunes media and iTunes music files. It seems I have 'organised' my media, but should or need there still be both types of files? I am running out of HD space and thought, maybe, 'merging' .

I'm trying to free up disk space. When I look at my files using 'Grand Perspective' (Like 'Disk Inventory X'), I see songs in both iTunes music and iTunes media files. I'm wonder if there is some kind of duplication between them. Could I find HD space by doing something with these files? I've already 'organised' them using the iTunes library feature. But I note that it seems that organizing could leave the old (?) files in their 'original place'. That sounds to me like duplication.
I'm not at all a 'techie' so don't know where to go from here.
Henry

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

How to check file name in local c drive and run exe file

Hi All,
I'm newbie user in action script. How can i check sepecific
file name in local c:\ drive and if file doesn't exist in local
drive download from server and run and if exist go to frame ..... .
Please help to me.
Thanks,

Dear Marghoob Suleman
Thank you very much for your kind help.
Thanks in advance

How do I protect my FLV files? or How to encrypt and decrypt FLV files using AIR?

Hi,
I am working on an AIR application, which is developed on eLearning concept. The application mainly deals with flv files. The application contains a video player component, which will stream flv files from an Apache Server and played in my application. Here my concern is I would like to protect my flv files some how against users who may stream them from Apache Server and use them without my application.
I thought of with an idea to do it. But I don't know whether it will work or not. So I am requesting for your suggestions and better ways to do this with a sample.
Here is my thought:
I would like to place the encrypted FLV files at Apache Server side [ Need to know how to encrpt the FLV files using Flex]
As my AIR application send a request for a FLV file, the Apache server should send the decryption key and a stream of FLV file.
AIR application should take the decryption key, stream of flv file and it should capable enough to decrypt the FLV file and play it in my application. [ But I don't know how to encrypt/decrypt FLV files through flex]
I can do encryption of FLV files using Mac Address of Apache Server system and using Java. But I don't know how can I decrypt the same FLV file ( Encrypted using Mac Address and java ) at AIR application side.
So I would be greatfull If any body help me in encrypting and decrypting of FLV file with a sample using Flex 3.0.
Thanks
Sudheer Puppala

russellfromblackburn south wrote:
Is it because the portable drive is NTFS format and the Mac wont recognise this? If so what do I do?
Yes, this is exactly what is causing the problem. Macs cannot write to NTFS formatted drives, only read. You must move the documents to the internal HDD/SSD of the Mac to be able to edit them.
Or, since you say you don't want to move the documents to the internal storage, you'll need to format the external HDD as FAT32.

Ssis - move files from one directory to another and rename destination file if present

Hello,
How is it possible to move files from one directory to another directory and if the file already exists in destination directory then rename it?
Thanks

1. Use a foreach loop with file enumerator pointing to first directory.
Inside loop have a ssis variable of type string to get filename (@[User::FileName])
Choose option as Fully Qualified in loop
2. Add another variable called @[User::DestFileName], set EvaluateAsExpression true for it and set expression like this
REPLACE(@[User::FileName],<source directory path>,<destination directory path>)
put actual paths in above expression in your case
and another variable called @[User::RenameFileName], set EvaluateAsExpression true for it and set expression like this
REPLACE(@[User::FileName],".","_old.")
3. Create a boolean variable say @[User::FileEXists]
4. Add a Script Task inside the loop and pass @DestFileName variable in ReadOnly mode and FileExists in ReadWrite mode
Inside Script Task write code as per below
http://blog.dbandbi.com/2013/11/13/check-file-exists-ssis/
5. Add File System Task choose operation as Rename File, Select IsSourcePathVariable as true and select @[user::DestFileName] variable and IsDestinationPath variable as true and select @[user::RenameFileName] variable
6. Choose ExpressionAndConstraint option for precedeence constraint from ScriptTask to above File System Task and choose constraint as OnSuccess and expression as
@FileExists == True
7. Add another File System task with operation as Move File Select IsSourcePathVariable as true and select @[user::FileName] variable and IsDestinationPath variable as true and select @[user::DestFileName] variable. Join Script Task as well as
File System Task above to this task and choose constraint as OnSuccess and Multiple Constraint option as Or (dotted line)
Then once executed it will work as per your requirement
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

"FILE NOT FOUND" KEEPS POPPING UP AND THE MP3 FILE IS MISSING?

I PULLED AN MP3 FILE FROM MY ITUNES LIBRARY THAT RUNS OFF MY EXTERNAL HARDDRIVE INTO A SESSION AND CHOPPED IT UP AND EVERYTHING WAS FINE! THEN I DRAGGED MY FILES OVER TO MY EXTERNAL HARDDRIVES TO FREE UP SPACE BUT DRUG THAT PARTICULAR PROJECT FOLDER BACK TO MY MACBOOK PRO AND WHEN I OPENED THE SESSION THE FILE NOT FOUND ERROR POPPED UP AND THE MP3 IS NOT IN PLAYBACK SESSION? THE PARTS I CUT UP ARE NOW GREY AND THE AUDIO BIN SHOWS THE NAME OF FILE BUT WITH AN ! AT THE END AND WILL NOT PLAY?????? WHAT DO I DO???? THE AUDIO FILE FOLDER FOR THAT PROJECT SHOWS THE MP3 FILE???

Please don't 'shout'. People really don't like it.

I installed mountain lion, now i cant get to my word files. I would prefer uninstalling mountain lion to losing my files. Can I just uninstall and have my files back? How do I do that?

I need my word files more than I need mountain lion. Can I uninstall and have my word files back?

Snowglobe111 wrote:
I need my word files more than I need mountain lion. Can I uninstall and have my word files back?
If you are unable or unwilling to update to Office 2008 or 2011, you can install Snow Leopard Server (with Rosetta) into Parallels or VMWare Fusion and continue to use Office 2004 (and most other PowerPC applications) concurrently with Lion or Mt. Lion:
[click on image to enlarge]
Snow Leopard Server is now available from the Apple Store for $19.99 + sales tax & shipping: 1.800.MYAPPLE (1.800.692.7753). Apple Part Number: MC588Z/A

Idoc- File scenario: Read a data field in IDOC and name the file with it

Hi All,
I am configuring an IDOC to File scenario.
I have a requirement where I need to read one of the IDOC data field and use that as the name of the File.
E.g: If the IDOC data field-1 = '123456', then I need to name the output file as '123456'.
Is it possible to do this. Appreciate your help on same.
Thanks
Shirin

Try this code..
desired field from IDoc will be input parameter to UDF
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
conf.put(key,a); // a is input parameter
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Also, check Adapter specific message attributes in file adapter, check filename

Steps for File to IDOC and IDOC to file Scenario

Settings to be done at R/3 like SM59,WE21,WE20
Setting to be done at XI
Can pls somebody send good blog for it.
Regards
Raj

SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
Cheers..
Vonkolu

How do I find out the size of a file, trying to make a DVD and told the fil

Made a slide show project with music and trying to write to dvd. Computer tells me the file is to large and to use a dual sided disk. I cut may slides out but no luck. How do you find out the file size?

Hi
And SlideShows has a limit of 99 slides per show.
I rather assemble mine in iMovie HD 6 where as QuickTimeKirk states
it only has Time as a limit dep. on encoding method selected and if Single or Double layer DVDs
Single Layer (for DL double time) - TIME includes menu - keeping it simple gives more to movie.
(I prefere "Brushed Metal" no audio, no animation.)
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
Yours Bengt W

PI 7.1 scenario -- File to File , File to IDOC and IDoc to File Scenario

Similar Messages

Maybe you are looking for