PI 7.1 SLD & NWA not working

Hello experts,
For my PI 7.1 system, i am not able to run SLD & NWA , although my Repository & Builder are working. I did SLDCHECK also but there seems no problem at all. Can anyone help me on this???
Thanks & Regards,
Amit Naik

Dear Amit,
Please follow SAP Note: 1160261 for NWA for PI Incomplete component tree:
After the setup the monitoring should be possible using the URL
http://server:port/nwapi. instead of /nwa
Regards
Praveen K

Similar Messages

Import into SLD does not work

Hi to all,
I want to synchronize the central sld of our production XI with the backup from the test sld, like in note 935474 grouping sld instances described. Import of CIM model works, import of backup of sld doesn't work. It is impossible to import a file bigger than 1023k. Import fails without error message in the log, only IE error message server not found.Is there a max upload size ? Don't know where to look ?
thanks
Bärbel

Hi,
Refer to the section 3.4.2.3.4 of this doc:
https://websmp104.sap-ag.de/~sapidb/011000358700000315022005E.PDF
Regards,
Kumar
**Reward points if helpful!!!!!

Synchronisation of two SLDs does not work

Hello everybody,
I try to configure a unidirectional synchronisation between two SLDs based on NW 7.0 SR3.
The first SLD is my central one. Here are all ABAP and JAVA-Systems registered. That is the part, which works as expected.
Now I want, that these information are synchronized to another (backup)-SLD. Therefor I want to use the
administration => datasupplier functionality, to add another SLD.
In the source SLD I added the "backup"-SLD URL and user/pwd.
After that I restarted the SLD -Server. But nothing happens. Must I be more patiently and wait until the registered systems actualized there information or what should I do?
Thanks a lot and have a nice weekend,
Stephan

Hi,
When the Data gets transferred from another sub-module(or I should call sub-interface) to accounting , it validates the fields according to field status group (as you said in FSG in GL Master data).
In you case it seems that the sender object has personal number mandatory and while the receiver (i.e GL in this case ) does not have the field open. Hence the error.
You could change the sender or the receiver FSG however the implications of each change needs to be analyzed.
Hope this answers your question with reasoning.
Thanks,
Mayank

NWA not working after patching NW 7.3 JAVA application server

Hi Experts,
After installing a new SAP 7.3, i patched it to stack 5 and as a result NWA and system administration no longer works, gives a 500 error, all other JAVA pages tested, user management etc all work.. MMC shows SAP is up and i can find no obvious errors.
I have checked a number of posts here but so far no help.
Edited by: Mike Gordon on Feb 29, 2012 3:31 PM

WDRuntimeException: Exception was thrown in preprocessing phase of application session f2845dbd62e911e1c5cd0000007ed556. The causing exception is nested. RID=f27f34de62e911e1a3100000007ed556 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doPreprocessing(ApplicationSession.java:663) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:349) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:325) at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87) at com.sap.tc.webdynpro.serverimpl.wdc.DispatcherServlet.doContent(DispatcherServlet.java:89) at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doGet(AbstractDispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:734) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:457) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:276) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475) at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269) at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328) Caused by: com.sap.tc.webdynpro.services.exceptions.ApplicationFaultException: wdInvokeEventHandler: exception thrown in this user coding area at com.sap.tc.webdynpro.progmodel.generation.DelegatingWindow.invokeEventHandler(DelegatingWindow.java:125) at com.sap.tc.webdynpro.progmodel.window.ViewController.invokeInboundPlugHandler(ViewController.java:446) at com.sap.tc.webdynpro.progmodel.window.InterfaceView.invokeInboundPlugHandler(InterfaceView.java:173) at com.sap.tc.webdynpro.clientserver.cal.NavigationManager.processInboundPlugQueue(NavigationManager.java:305) at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:595) at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doPreprocessing(ClientApplication.java:1457) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doPreprocessing(ApplicationSession.java:660) ... 46 more Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0 at java.util.ArrayList.RangeCheck(ArrayList.java:547) at java.util.ArrayList.get(ArrayList.java:322) at com.sap.js.nwa.nav_engine.transitionengine.NWANavigationEngineImpl.loadFavorites(NWANavigationEngineImpl.java:418) at com.sap.js.nwa.nav_engine.transitionengine.NWANavigationEngineImpl.addMyWorkspace(NWANavigationEngineImpl.java:271) at com.sap.js.nwa.nav_engine.transitionengine.NWANavigationEngineImpl.getNavigationTree(NWANavigationEngineImpl.java:203) at com.sap.lm.itsam.ui.floorplan.FloorPlan.loadNavigationTree(FloorPlan.java:2329) at com.sap.lm.itsam.ui.floorplan.FloorPlan.initNavigationFrame(FloorPlan.java:1018) at com.sap.lm.itsam.ui.floorplan.wdp.InternalFloorPlan.initNavigationFrame(InternalFloorPlan.java:847) at com.sap.lm.itsam.ui.floorplan.FloorPlanWindow.onPlugDefault(FloorPlanWindow.java:381) at com.sap.lm.itsam.ui.floorplan.wdp.InternalFloorPlanWindow.wdInvokeEventHandler(InternalFloorPlanWindow.java:126) at com.sap.tc.webdynpro.progmodel.generation.DelegatingWindow.invokeEventHandler(DelegatingWindow.java:121)

SLDCHECK not working

Hi,
When I try sldcheck tcode it gives following error in the browser:
503 Service Unavailable
Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.
Also SLDCHECK transaction shows:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
Also when I try to access Integration Builder it gives following error:
500 Internal Server Error
Exception
An internal error occurred. Contact you XI administrator
java.lang.NoClassDefFoundError: com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl (initialization failure)
Error Details, Error History, Build Info, Generic Application Info
Apart from this:
RZ70 execution shows following message:
Used RFC destination: SLD_UC
RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'
Existing periodic jobs removed. Number: 1
sxi_cache:
Unable to refresh cache contents
sproxy:
No connection to integration builder(only generic data available)
Report SPROX_CHECK_IFR_RESPONSE shows:
Integration Builder data not understood
Report SPROX_CHECK_IFR_CONNECTION shows:
Integration Builder data not understood
All these things were working properly earlier and it is now not working since my J2ee engine went down. Now my J2ee engine is up & running but SLD is failing.
Please check and help me solve this issue.
Thanks & Regards,
Tejas

Please go through the following link:
Problem with SLD connection
Problem with SLD connection
Check step by step this link in ur sap system cooly
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
For internal server 500 error of IB check this thread :
500:Internal Server Error

SLDCHECK does not work.

SLDCHECK does not work.
I tried every thing in this link.
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
Our BASIS guys dont have much exp with NW 2004s. Should I go through the configuration guide of XI again.
Can any send me the installation guide for PI 2004s.
-naveen.

Moorthy,
SLDCHECK gives the following output.
<i>Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id:      SAPSLDAPI_SB1
gateway host: flusb1
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name:   flusb1
port number: 50000
user       : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code     4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id:      LCRSAPRFC_SB1
gateway host:
flusb1
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section   = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
</i>

RZ70 Abap to push data to SLD not working

Hi All,
Recently for one of the staging system we moved from physical server to VM. Instance number got changed from 01 to 00 - just to keep in sync with other SRM systems. (SAP SRM 7.0).
Now to push this data to SLD, RZ70 is not working. its spinning for unlimited duration.
Had a check on SLD_UC and SLDNUC, working fine.
SAPSLDAPI - working fine
SLDAPICUST and SLDCHECK - working fine
Job keeps running which I can see in SM37 and SM66, however for respective WP nothing is getting updated or no change when I check in SM50 specific WP - by double clicking in it. like Roll in, Roll out and memory details nothing is getting changed.
The program name is : _SLD_ASSOC
Any one has any idea, what more to try?
Found this link: however its unanswered : SAP_SLD_DATA_COLLECT getting hanged
Regards,
Haseena

Hello Gaurav,
We are higher version of SRM, so note cann't be applied.
SAP SRM 7.0
SAP_BASIS SAPKB70211
SRM_PLUS - SAPK-70106INSRMPLUS
SRM_SERVER - SAPK-70108INSRMSRV
SRM_EXPL - SAPK-70104INSRMEXPL
SRM_EXT - SAPK-70108INSRMEXT

SLD registration for TREX not working...

SDN Members,
I am unable to register TREX in SLD. I have put in an OSS message; however, I have yet to receive a response back from SAP... So any help would be much appreciated.
Thanks,
-Patrick
Steps for the Reconstruction
1. Generate SLD Configuration file:
sldreg -configure /usr/sap/TXD/TRX85/slddest.cfg
2. Copy the SLD Config. File to the Global SLD Directory and run
command (to transfer data to SLD):
saposcol -b | sldreg -connectfile slddest.cfg -stdin -oldtransferdtd
Receive the following:
(hostnames, ip's, and ports altered to protect the innocent)
prtdiag can only be run in the global zone
Thu Dec 27 10:33:04 2007 SLD Registration Program [2.0] (May 8 2006) [None Unicode]
Thu Dec 27 10:33:04 2007 No XML data input file set. Will read input data from standard input.
Thu Dec 27 10:33:04 2007 Supplier Name: ComputerSystem / Supplier Version: 1.0 / Supplier Vendor: / CIM Model Version: 1.3.21
Thu Dec 27 10:33:04 2007 Group:
Thu Dec 27 10:33:04 2007 Group name system1
Thu Dec 27 10:33:04 2007 validateAttributes OK
Thu Dec 27 10:33:04 2007 Property Status
Thu Dec 27 10:33:04 2007 Value OK
Thu Dec 27 10:33:04 2007 Property NameFormat
Thu Dec 27 10:33:04 2007 Value IP
Thu Dec 27 10:33:04 2007 Property Caption
Thu Dec 27 10:33:04 2007 Value hostname01
Thu Dec 27 10:33:04 2007 Property Name
Thu Dec 27 10:33:04 2007 Value usahstxutxd01
Thu Dec 27 10:33:04 2007 Property IPAddress
Thu Dec 27 10:33:04 2007 Value X.X.X.X
Thu Dec 27 10:33:04 2007 Property OpSysReleaseName
Thu Dec 27 10:33:04 2007 Value SunOS
Thu Dec 27 10:33:04 2007 Property OpSysCategory
Thu Dec 27 10:33:04 2007 Value Solaris
Thu Dec 27 10:33:04 2007 Property VendorRelease
Thu Dec 27 10:33:04 2007 Value SunOS 5.10
Thu Dec 27 10:33:04 2007 Property CPUType
Thu Dec 27 10:33:04 2007 Value sun4v
Thu Dec 27 10:33:04 2007 Property MachineCategory
Thu Dec 27 10:33:04 2007 Value SPARC
Thu Dec 27 10:33:04 2007 Property OpSysBits
Thu Dec 27 10:33:04 2007 Value 64
Thu Dec 27 10:33:04 2007 Property NumberOfCPUs
Thu Dec 27 10:33:04 2007 Value 32
Thu Dec 27 10:33:04 2007 Property CPURate
Thu Dec 27 10:33:04 2007 Value 1200
Thu Dec 27 10:33:04 2007 Property PhysicalRAMInMB
Thu Dec 27 10:33:04 2007 Value 65528
Thu Dec 27 10:33:04 2007 Property VirtualRAMInMB
Thu Dec 27 10:33:04 2007 Value 87224
Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
Thu Dec 27 10:33:04 2007 HTTP trace: false
Thu Dec 27 10:33:04 2007 Data trace: false
Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
Thu Dec 27 10:33:04 2007 *** Start SLD Registration ***
Thu Dec 27 10:33:04 2007 Used URL: http://hostname01:50000/sld/ds
Thu Dec 27 10:33:04 2007 HTTP open status: true - NI RC=1
Thu Dec 27 10:33:04 2007 HTTP send successful.
Thu Dec 27 10:33:04 2007 Return code: 401 --- Return message: (Unauthorized)
Thu Dec 27 10:33:04 2007 HTTP response: Failure. HTTP status code: 401
Thu Dec 27 10:33:04 2007 *** End SLD Registration ***
Thu Dec 27 10:33:04 2007 Data send status: false
Consequently SLD is not updated with TREX information. Using IE I can go to
the url http://hostname01:50000/sld/ds , get popup asking for
credentials (we log in using SLDDSUSER account - w/ Basis Admin level
auth.), and we receive: Page Cannot be displayed (HTTP 400 - Bad Request
Internet Explorer ).
If we go to http://hostname01:50000/sld and login with the same
account (SLDDSUSER) we see the full SLD Toolset.
Edited by: Patrick Riggins on Dec 27, 2007 6:06 PM

UPDATE:
We were able to work through and
resolve the error we initially posted in this Thread. Now we run sldreg
and all looks good; however, we are seeing nothing in SLD (on our XI
System) even after stop/restart of SLD Server:
Steps for the Reconstruction
1. Generate SLD Configuration Files:
sldreg -usekeyfile -configure /usr/sap/TXD/TRX00/slddest.cfg
2. Copied files to Global SLD
/sapmnt/TXD/global
3. Run command to transfer data to SLD:
saposcol -b | sldreg -user <user acct> -pass <password> -host
<hostname> -port <port #> -datatrace -httptrace -
logfile /usr/sap/TXD/TRX00/sld_reg.log -stdin
Looks successful:
Thu Dec 27 20:31:06 2007 HTTP body length: 0 --- HTTP body: empty
Thu Dec 27 20:31:06 2007 Return code: 200 --- Return message: (OK)
Thu Dec 27 20:31:06 2007 HTTP response: Success. HTTP status code: 200
Thu Dec 27 20:31:06 2007 *** End SLD Registration ***
Thu Dec 27 20:31:06 2007 Data send status: true
However in SLD , under content maintenance selecting "All With
Instances" in the dropdown list and "Class" , no TREX Services showing.
And no technical system showing for TXD (TREX System)

Registration of TREX in the sld not working

HI all,
I need configuration the TREX for complete instalation of xPD, but the registration on sld of trex no working, However However, I follow in the footsteps of the note 998708 and not working
Any suggestions to solve the problem?
Thank you

It's the multicolored arrow in the bottom right. It has worked before today with no problems. I don't know why it just suddenly stopped working.

SLD connection user/password not working.

Hello friends,
I am new bee in SAP Netweaver.
I installed SAP Netweaver for java.
Now I want to connect it with BAPI from SAP.
so, some where i am sucked with SLD. I opened Visula Administrator and nothing there to connect.
I also tried http://localhost:50000/sld but my user/password not working.
1. What to do to see/get username/password for SLD?
2. How to connect netweaver to access SAP ZBAPI?
Regards,
RH

Hello friends,
I am new bee in SAP Netweaver.
I installed SAP Netweaver for java.
Now I want to connect it with BAPI from SAP.
so, some where i am sucked with SLD. I opened Visula Administrator and nothing there to connect.
I also tried http://localhost:50000/sld but my user/password not working.
1. What to do to see/get username/password for SLD?
2. How to connect netweaver to access SAP ZBAPI?
Regards,
RH
Hi Ronny.
Where is your UME running? On the java engine, on an ABAP system or at a LDAP?
What i want to say is that your user has to gain the rights to connect to the SLD. Easiest way is to give you admin rights - to do that you have to know where your userstore is running....
I am not sure if this is correct http://localhost:50000/sld
Normally it should look like http://my.sap.com/56600/sld where my.sap.com is a fqdn and 56600 is the port of the java engine. 66 ist the system number of the as java.
ZBAPI? I do not really know but i think you have to use a jco to connect...
regards,
Martin

Connection to system landscape directory (SLD) could not be opened succesfully

Hello SAP Gurus,
I got the follow wrong with MSS main page: ERROR: Exception condition "COMMUNICATION_ERROR" triggered (termination: RABAX_STATE)
I was checking SLD connecton between sap portal and SLD, but i show me ad "Connection to system landscape directory (SLD) could not be opened succesfully"
User SLDDSUSER, is no lock.
Enclose pictures.
Best regads.

Hi Andres,
You need to check the below things.
1. Try to do telnet from portal server to the SLD server
   telnet svrsapnpd.minedu.gov.co 50000
   I hope this will not work, if its work then you have to check the user administrator.
2. If the SAP netweaver version is 7.0x
   Open the visual admin-->select services and check the SLD Data Supplier service
3. If SAP Netweaver is 7.1,7.3 and above
open the nwa -> goto destination and check the SLD_DataSupplier and SLD_Client
With Regards
Ashutosh Chaturvedi

Application not working in Quality, which was working fine in Dev. Urgent!!

Hello Guru's,
We are experiencing a problem in portal.
Issue: We customized application in MSS( General Information which calls FM in the backend to populate the data) using NWDS and deployed the application into Development System and it's working fine. so we used NWDI to transport the code into Quality and the application is not working fine in Quality. The Issue is when transported the application into Quality it is not showing any data. and when checked the RFC trace it is not showing any FM been called when accessing the application. And also when checked in NWA it is not showing any error, when checked the JCo connections they are working fine.
Anyone please help us out. It's very Urgent.
Thanks in Advance.
Regards,
Pramod
'Points will be awarded for sure for helpful answers.'

Hello Harini,
Thank you for the reply, and I was expecting answer from you. Was seeing other forums and your replies to those .
Anyways Let me tell a little more on the issue:
We are implementing ESS/MSS in portal as per the req. we need to create a custom iview with employee details. And for that we have created a FM which will pick up the data and we are accessing that Function Module in WebDynpro application.
We deployed the code into QA and Prod In prod it is working fine but in quality it's giving 500 Internal Server Error
when checking the log file we are not getting any error logged. and checking in the R/3 whether that FM is executing when accessing the application using ST05 tcode it is not showing up the RFC trace either.
And Configuration of QA is same as Prod and all the permission are properly assigned.
Just wondering how is a application responding differently in different landscapes.
Looking forward for a solution.
Appreciate your time and help.
Regards,
Pramod

Bex Query is not working in portal

Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENU

Hi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank

Business Planning is not working in Portal BI iviews

it give me error of JCO . SLD is fine, and JCO is configured but it still does not work. help me please

Hi,
Please refer to this link : http://help.sap.com/saphelp_nw04s/helpdata/en/fa/c1194276e0de2ce10000000a1550b0/frameset.htm. This documentation provides all the information you need to configure and run business planning on Portal.
Just refer to the section Tasks -> Business Planning Scenario Variant. It refers to the JCo Connections and other configurations you would need to maintain.
Hope this helps.
Cheers,
Sunil
PS: Reward points for helpful answers.

SPROXY not working in application system

Hello all,
I have been trying to make SPROXY work in my QAS ERP 2004 SPS23 system
for a few days now but I can not make it. I have
configured SPROXY in the past for my sandbox and DEV system with
success but I do not seem to have any luck in QAS.
My PI landscape consists of sandbox, developement, qa and production
systems. The version is PI 7.0 SPS21
My ERP landscape consists of the same 4 systems but in version 6.40 -
ERP 2004 SPS23
All non production systems use a central SLD that runs in the PI development
box (PID)
The error message I get is as follows:
When I run SPROXY in ERP QAS client 330, I get : "No connection to Integration
Builder (only local data visible)"
When I do Goto --> Integration Builder, I get the message "Integration
Builder address not maintained"
However, when I do Goto --> Connection Test, from the 4 reports I have
to run, two work and two do not work:
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS works and shows the correct address for Integration repository
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION works
The other two reports
=>Check with report SPROX_CHECK_IFR_RESPONSE
==>Check with report SPROX_CHECK_IFR_CONNECTION
return: Integration builder data not undestood.
SLDCHECK runs fine: All green and invokes correct IE session with the correct SLD URL (central SLD)
SLDAPICUST shows the correct SLD (central)
SXMB_ADM --> Integration Engine Configuration shows the destination RFC
SAPIS_PIQ
which is defined in SM59 as type H and works fine
TCP RFCs LCRSAPRFC and SAPSLDAPI work
The corresponding JCos in Visual Administration look ok
I have registered the queues in SXMB_ADM and they registered ok .
The /sap/xi/engine service is active in both the application system and the PI system (QAs and PIQ)
Finally the exchange profile settings in PIQ are fine as well
com.sap.aii.connect.repository.name : piqas.finance.local
com.sap.aii.connect.repository.httpport : 50000
com.sap.aii.connect.repository.contextRoot :rep
com.sap.aii.connect.integrationbuilder.startpage.url : rep/start/index.jsp
com.sap.aii.applicationsystem.serviceuser.name: PIAPPLUSER
and the password is set.
PIAPPLUSER is service user and is not locked.
I have tested SLDCHECK in PIQ and SLDAPICUST and they look ok as well.
Any other clues? Any way I can investigate further via checking logs
and traces to find out what is wrong?
The "Data not understood" message is not helping me much in determining
what is wrong
Many thanks
Andreas

Hi Andreas,
Please go through the below blog which explains you step by step in proxy connectivity.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Naveen.

PI 7.1 SLD & NWA not working

Similar Messages

Maybe you are looking for