PI 7.1 System copy Devline does not exist: 8a5afe612d3511df97170017a4a7b84d

HI All,
We have done the system copy of the PID 7.1 ehp1 from one hardware to another Hardware later
abap and java insances are working fine but we are not able to create or save objects in PI after sytem copy we are facing the issues while saving the objects
Isuees was "Devline does not exist: 8a5afe612d3511df97170017a4a7b84d."
Appreciate your help.
Regards
Kotesh

Hi Eoin Kierans,
Thanks for your reply, We have not checked the system before the System copy now source is not available, Could you please help us on resolving the issue in Target PI system now.
We have chekced in the ESR few objects we can see OTC AND RTR are in the conflict Tab, When i ran the consistency check pleae fidn the below result:
Standard Consistency Check
ajaiswal
Following problem found during consistency check for object Operation Mapping:Mapping program Message Mapping MM_IN1013 | http://pi.cott.com/OTC/IN1013_AR_INVOICE does not match request target message IDoc ZFI_ARINVOICE.ACLREC01.ZFI_ARIV | urn:sap-com:document:sap:idoc:messages. Target message External Message ED_IN1013 | http://pi.cott.com/OTC/IN1013_AR_INVOICE | ZFI_ARIV | of the message mapping is different.
Standard Consistency Check
ajaiswal
Following problem found during consistency check for object Operation Mapping:Mapping program Message Mapping MM_IN1014 | http://pi.cott.com/OTC/IN1014_AR_INVOICE_UK does not match request target message IDoc ZFI_BPCS_AR_UK.ACLREC01.ZFIARUK | urn:sap-com:document:sap:idoc:messages. Target message External Message ED_IN1014 | http://pi.cott.com/OTC/IN1014_AR_INVOICE_UK | ZFIARUK | of the message mapping is different.
Please help us on resolving the issues in Target PI system now.
Regards
Kotesh
Deleted Objects
rmukherj
Delete version found for object Service Interface

Similar Messages

Error IW351-------System: Status object does not exist

Hello,
I am getting bleow error while saving service order.
System: Status object does not exist. Message Numner IW351
Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
USEREXIT_SAVE_DOCUMENT_PREPARE in MV45afzz.
When i Try to save the service order i get the error messages which is coming from my validation
After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
As soon as i click on that i get a STOP messgae.
Which i as below.
System: Status object does not exist
If I comment all my code and write only error message then it comes.
but it does't come for information and warning message.
actually steps are
1. go to IW51
2. create notification then service order then sales order
3. if product hierarchy is different for material then it should display error on saving
4. it is giving error message(my error message)
5. if i press enter and then click on advance shipment icon(truck) for change it display standard message.
which turn me out of transaction.
but if i click on advance shipment icon without pressing enter its working fine..
my error message is a normal error message .
message e038(zcrm)
" service line must be same".
pls suggest.
Regards
LOKESH

Hi,
After MESSAGE add STOP. :
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
STOP.
or If ambiguity with usage of STOP being obselete use EXIT after message.
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
EXIT.
BR
Dep

Source system BID-010 does not exist

Hi,
I have installed BI statistics in BI 7.0 in Dev.While transporting to QA system, I am getting the following error message:
"Source system BID-010 does not exist"
Can anyone please help!!
Thanks,
Dipti

Hi Siggi,
Thanks for your reply.Logical system BID was not there in QA.I have made the required changes.
I also received an error as " There is no DataSource with these attributes
Reference to transfer structure 0TCTBWOTYPE_TEXT_HA not available. No activation possible. "
I checked in table RSTSODS ,transfer struct 0TCTBWOTYPE_TEXT_HA" is active.
Can you please help..
Thanks
Dipti

Cross system company code does not exist.

Hello,
I am trying to upload Cost center through IDOC menthod.
Message type of IDOC is : COSMAS
Basic Type : COSMAS01
But i am getting a error as Cross system company code does not exist in ( Create IDOC Overview).
Kinly help me in resolving this issue.
Regards,
Hemanth.
Edited by: hemanth kumar on Feb 20, 2009 3:08 PM

Hi Shweta
Have you checked with the data i.e. company code .
May the company code which you are passing is not there in ur receiver system.
Just check it out.
Regards
-Mitesh

Unable to login: SAP System Message: Dynpro does not exist

Hello All,
I'm created a test system to practice our upgrade post steps on. I created a pared down copy of one of our other systems. When I try to login, I get a popup message saying: Dynpro does not exist.
To create the pared down version, we used empty files for:
COEP
GLPCA
BALDAT
MSEG
BSIS
LIPS
LTAP
CE1LPOC
ZHYPFIT
BALHDR
VBFA
COSP
COSB
CDCLS
ZHYPF2A
/IRM0760
CDHDR
COSS
CMFP
CHVW
RESB
ZHYPFIO
AUSP
VBOX
JCDS
VBAP
We don't think these being empty is the problem, but I wanted to mention it just incase it is.
Below is the dev_w0 log. I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
Any insight you might have into this would be appreciated. Thank you.
~TJ
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
M sysno      79
M sid        Q60
M systemid   324 (IBM iSeries with OS400)
M relno      7000
M patchlevel 0
M patchno    172
M intno      20050900
M make:      single threaded, Unicode, 64 bit, optimized
M pid        6396
M
M
M Thu Jan 22 15:12:50 2009
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c   1290]
M ThInit: running on host USALSAPU
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jan 22 15:12:51 2009
C R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is KRNQ60700
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
C === Central DB connect successfull! ===
C === Connection settings ===
C connected               = TRUE
C con_hdl                 = 0
C db_handle               = 1
C dbhost                  = USALSAPU
C rdbname                 =
C dblib                   = R3Q60DATA
C r3sysle_changed         = TRUE
C query_compl_reval       = O
C dbconnecttype           = L
C user                    = Q6079
C qaqqinilib              = Default (QUSRSYS)
C dbjobname               = WP00
C dbjobuser               = Q6079
C dbjobno                 = 197762
C rmtexelib               = KRNQ60700
C parallel_alter_tables   = *OFF
C ===========================
C Found only default query options in QUSRSYS/QAQQINI.
C -
C -
DbSl EGO Structure
C -
C     SAPSYSTEMNAME               = Q60
C     Character encoding          = UNICODE
C     process class               = dialog process
C     workprocess id              = 0
C     local host                  = USALSAPU
C     dbhost                      = USALSAPU
C     rdbname                     =
C     dbname                      = Q60USALSAPU
C     dblib                       = R3Q60DATA
C     application server          = DVEBMGS79
C     Connect type                = LOCAL
C     pid                         = 6396
C     wpjobname                   = WP00
C     wpjobuser                   = Q6079
C     wpjobno                     = 197762
C     DB2/400 vers. appl. server = PASE 1
C     DB2/400 vers. DB server     = V6R1
C     da_cache_size               = 100
C     reopen                      = ON
C     timeout_retry               = 3
C     ODP threshold               = 800
C     ODP commit thresh.          = 810
C     ODP open thresh.            = 850
C     QAQQINI library             = Default (QUSRSYS)
C     Alternate QAQQINI library   = Not specified
C     use_lobs_for_long           = ON
C     use_lobs_for_short          = OFF
C     single_execution_threshold = 2000
C     single_execution_reuse      = OFF
C     keep_tmp_SQLpkgs            = OFF
C     dbsl_trace                  = OFF
C     allow_cancel                = Try (Unspecified)
C     nqe_optimize_method         = O - All I/O (compatibility mode)
C     nte_list_size               = 10
C     dbsl_alternate_package      = OFF
C -
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20090122 151250 USALSAPU
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 0x7000002d0000000, size: 120000000)
M SHM_ROLL_AREA          (addr: 0x7000002e0000000, size: 268435456)
M SHM_PAGING_AREA          (addr: 0x7000002f0000000, size: 335544320)
M SHM_ROLL_ADM               (addr: 0x700000310000000, size: 2672386)
M SHM_PAGING_ADM          (addr: 0x700000320000000, size: 820256)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0x700000330000000
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12176 bytes (50 server) at 0x700000340000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers created
B dbntab: Buffer FTAB(hash header) (addr: 0x700000360000088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
B dbntab: Buffer FTAB(item array)   (addr: 0x700000360138ad8, size: 5120000)
B dbntab: Buffer FTAB(data area)    (addr: 0x70000036061aad8, size: 122880000)
B dbntab: Buffer IREC(hash header) (addr: 0x700000370000088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
B dbntab: Buffer IREC(item array)   (addr: 0x700000370138ad8, size: 1280000)
B dbntab: Buffer IREC(data area)    (addr: 0x7000003702712d8, size: 15360000)
B dbntab: Buffer STAB(hash header) (addr: 0x700000380000088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
B dbntab: Buffer STAB(item array)   (addr: 0x700000380138ad8, size: 1280000)
B dbntab: Buffer STAB(data area)    (addr: 0x7000003802712d8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0x700000390000088, size: 2976)
B dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
B dbntab: Buffer TTAB(item array)   (addr: 0x700000390139430, size: 3200000)
B dbntab: Buffer TTAB(data area)    (addr: 0x700000390446830, size: 23360000)
B
B Thu Jan 22 15:12:52 2009
B dbstat: table statistics switched on for 84171 tables
B dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
B dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 104857600
B ***LOG BB0=> buffer TABL       started with length 350000000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
B dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 17590656
B ***LOG BB0=> buffer TABLP      started with length 35840000   bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 29 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 80021 * 48 = 3841008
B 4: 40000 * 256 = 10240000
B 5: 80021 * 8 = 640168
B 6: 1 * 200 = 200
B 7: 513 * 8 = 4104
B 8: 262473 * 256 = 67193088
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
B ***LOG BB0=> buffer EIBUF      started with length 80000k     bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM   (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
B ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 40009 * 48 = 1920432
B 4: 20000 * 256 = 5120000
B 5: 40009 * 8 = 320072
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 65617 * 512 = 33595904
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA   (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
B ***LOG BB0=> buffer CUA        started with length 40000k     bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR   (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
B ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
B dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
B   max_blocking_factor = 20, max_in_blocking_factor      = 40,
B   min_blocking_factor = 10, min_in_blocking_factor      = 10,
B   prefer_union_all    =   0, prefer_join                 =   0,
B   prefer_fix_blocking =   1, prefer_in_itab_opt          =   1,
B   convert AVG         =   1, alias table FUPD            =   1,
B   escape_as_literal   =   0, opt GE LE to BETWEEN        =   0,
B   select *            =0x00, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Jan 22 15:12:53 2009
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
N SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client:    , key: SYSPSE, len: 1872)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
M CCMS: start to initalize 3.X shared alert area (first segment).
S
S Thu Jan 22 15:12:54 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x18499b440
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 400
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x700000460000070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x700000460000740
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A
A Thu Jan 22 15:12:55 2009
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
A Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
A >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
A >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
A RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
A RFC Options> H=USALSAPU,S=79,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 47822 bytes at 0x7000004f0000000
N
N Thu Jan 22 15:12:56 2009
N SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.172.20050900]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [17]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E
E Thu Jan 22 15:12:58 2009
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Jan 22 15:13:03 2009
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
A
A Thu Jan 22 15:13:07 2009
A *** ERROR => RFC ======> cannot open SAPGUI
[abrfcio.c    8185]
A RFC 1729 CONVID 62379446
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
[abrfcio.c    8185]
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c    8185]
A RFC 1729 CONVID 62382527
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
[abrfcio.c    8185]
A
A Thu Jan 22 15:13:14 2009
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c    8185]
A RFC 1729 CONVID 62392457
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 3, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
[abrfcio.c    8185]
B
B Thu Jan 22 15:13:16 2009
B table logging switched on for client '010'
M
M Thu Jan 22 15:13:22 2009
M AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER     /QXDARECVR )M *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c   1548]
M *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [             0]
A A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:22 2009
A
A ABAP Program SAPMSYST                                .
A Source SAPMSYST                                 Line 1770.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Dynpro does not exist.
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Jan 22 15:13:23 2009
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:23 2009
A
A ABAP Program SAPMS380                                .
A Source                                          Line 0.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Dynpro does not exist.
A
M ThIUsrDel: th_rollback_usrdelentry = 1
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c   1384]
S
S Thu Jan 22 15:14:20 2009
S found spool memory service RSPO-ACTIONS at 0x70000046000a478

Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Remote Client copy: Table does not exist in Nametab

Hi!
We executed a client copy between 2 SAP EHP4 systems.
The both systems are SAP ERP EHP4 systems, but with different Support package.
After the client copy we get the following errors:
Table ADDRC_DELI_SERV does not exist in Nametab
Table ADDRC_DELI_SERVT does not exist in Nametab
Question
How can we solve these errors, maybe to transport the tables?
Thank you!

Hi,
I would suggest to synchronize support pack levels between systems and copy it again. You could try to manually define those missing tables, but you need to create them under SAP namespace. later during upgrade you'll probably get some errors. Your issue is why it's not supported by SAP. Have a look at OSS note 70547 with detailed information about client transport.
Cheers

Source system BIDCLNT600 / ECCDEV210 does not exist

Hi all,
While transporting the BI dev transports to BI prod ,
I am facing the subjected error saying "
Source system ECCDEV210 does not exist
Source system BIDCLNT600 does not exist
Regards
Venkat

Hi,
I maintained the settings in BI Prod like:
Original Source System : ECCDEV210 (R/3 Dev)
Target Source System : ECCPRD400 (R/3 Prod)
But I am facing the other problems like:
1. Field ERDAT will not be delivered from DataSource 0WBS_ELEMT_ATTR in source system ECCPRD400
2. DataSource 0WBS_ELEMT_TEXT does not exist in source system ECCPRD400 of version A
3. Mapping between data source 0WBS_ELEMT_TEXT and source system ECCPRD400 is inconsistent
4. Reference to transfer structure 0BILBLK_DL_TEXT_BB not available. No activation possible.
5. Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
6. Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Delete Mode)
Like these so many repetitions in each area.
For the information:
1. I opened the R/3 prod system , activate the data sources (standard using RSA5) and replicated into the BI prod system.
So,whatever I activated in R/3 prod are available in BI prod after replication. After that I send the transport request. But I have not transported any request from R/3 Dev system to R/3 Prod system with the data sources.
2. I created the transport request based on Info cubes. First, In data flow before option and next request with " In data flow after " option and collection mode is " automatically"
Pl advice me.
Regards
Venkat

Error in Source System, Time series does not exist

Hi Guys,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJ

Hi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P

IDocStatus:Error in ALE service Cross-system company code does not exist

HI All,
I am sending CREMAS04 IDOC from XI to one R/3 system,and in R/3 a vendor should get created in master table.
My IDOC is getting posted successfully but in R/3 system I am getting error that
IDoc: 0000000000705816 Status: Error in ALE service
T100 Text: Cross-system company code XXX does not exist
I have created partner profiles in receiver system and in partner profiles I have set the process code as CRE1.
Please help me to resolve this problem.

Hi Shweta
Have you checked with the data i.e. company code .
May the company code which you are passing is not there in ur receiver system.
Just check it out.
Regards
-Mitesh

Index does not exist in database system DB6

Hi,
Problem : <b>Index does not exist in database system DB6</b>.
I need further explanation why when i transport index from Development Client to Production Client the index is active but does not exist in database system DB6.
So when the cases is occurs i must re-create the index again in Production Level...
Can someone give me some ideas?
Thanks.

Hi,
it might be due to some BUG in RDBMS...
First Check the Secondary index in TEST system
Look at the Transport Number in DEV system, If this is having error, then it will show you the error details also,
If that not moved Properly then you need to create another request for the INDEX and move it again
See the threads with similar problem...
Warning: Index does not exist in database system MSSQL
Index does not exist in database system ORACLE??????
Re creation of database index
Hope it will solve your problem...
<b>Reward Points if useful</b>
Thanks & Regards
ilesh 24x7

IF_WORKFLOW does not exist ?

Hello,
i creaed an abap class using the class builder and i want to use this class in a workflow, once i added the class and its method to the workflow, and i did checking, the system said" IF_WORKFLOW does not exist.
i know i can create workflow with objects from the class builder but what is this interface and how to implement it. and do i implement in from within the object definition in the class builder ?
Any suggestions on this matter.
points are awarded
Regards

Alternatively you can use the hep document:
http://help.sap.com/saphelp_nw2004s/helpdata/en/47/058a422dfad665e10000000a155106/frameset.htm
I would appreciate if you could close the thread if you have found the solution...
Best regards,
Sudhi

Error : IF_WORKFLOW does not exist ?

Hello,
i creaed an abap class using the class builder and i want to use this class in a workflow, once i added the class and its method to the workflow, and i did checking, the system said" IF_WORKFLOW does not exist.
i know i can create workflow with objects from the class builder but what is this interface and how to implement it. and do i implement in from within the object definition in the class builder ?
Any suggestions on this matter.
points are awarded
Regards

Hi Hassan,
I guess I have answered this in the Workflow forum. You have to put in the interface in the interface tab of your class in the class builder (SE24). Please note that there might be methods you would have to implement in the class before using it. Please refer to the documentation.
Best regards,
Sudhi

Group does not exist

Hi!
I´m in a upgrade from version 4.6C to 6.0, and i'm checking the bases of costing sheet because i can´t calculate overhead. The group of cost elements appears in the selection list, but when i want to assign it the system says: "group does not exist"!!! but this is not true, it exists in the system.
Somebody helps me pls?
Thanks,
Catalina

Hi Catalina,
I can't say much without seeing the error. However, you may note down the error number and search the sap notes. If possible, give the error number on this forum also. Thanks,
Vishal.

Transaction Sourcing - " Screen does not exist"

Hello all,
I tried to call the "transaction BBPSOCO01" or "Carry Out Sourcing" then i am getting the following message
"The following error text was processed in the system SR2 : Dynpro does not exist
The error occurred on the application server cs-ebp_SR2_08 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Module: PREPARE_WORKLIST_WEB_TRANSPORT of program SAPLBBP_SOCO_UI_ITS "
Right now i am working on SRM 5.0 sp 6.
I have seen similar problem in SRM4.0 sp 5 and the relevent note is 632982.
Is there any note exists for SRM 5.0 sp 6 or any other way to solve this problem.
with regards,
mahesh

Hi Mahesh,
AM expericiencing the same problem. I've followed teh instraction in note 632982 but am not winning. Because the the system attempted to use dynpro 0301 in program "SAPLBBP_SOCO_UI_ITS". Which i've deleted as per note above.
How can i take out this dynpro from the include?
Rgs,
Maggie

Service entry sheet Number shown in PO history but does not exist

Dear Experts,
we use ZML81N : for creation of SES
& use ML81N : For Acceptance ( Release ) of SES
while creating PO , under services tab for a line item , the service has been entered for total Quantity 12 & units as "months"
User tried to create one service entry sheet against the line item with Quantity = 1 & unit = month , but it seems this SES got saved somehow without any line items inside it .
if we we try to open this SES with number shown in PO history , system says SES "Does not Exist"
In the PO history against the PO item in Item Details-PO history tab , one Service entry sheet is showing with "SEnt" in the
short text , but there is no row in PO history for the above with short text as "GRSR" , which also should have been created
automatically by the system . In the column "Amount in LC" , amount for the service is showing .
When a new SES for the same line item is attempted to be created , the system is showing available balance Quantity as "11" ,
that means system is considering the "1" quantity entered in the first SES as consumed .
Please advise how we can delete the first SES which we are not able to see , free-up the budget consumed by this SES &
restore the Balance Quantity shown in the new SES as again "12" as if no SES has been done against the PO line item.
I have tried to search the forum , but could not find solution.
Your Response will be deeply appreciated.
Thanks in Advance .
Regards,
Anil Shanbhag

Dear Sir,
Thanks a lot for your reply.
After checking it is found that there is no data in the tables ESLL, ESLH, etc. stored for the mentioned entry sheet, so SAP can not try to reconstruct the entry sheet based on that data.
Can you please tell from which tables the wrong FI and CO postings (e.g., the referring accounts) must be cleared manually in order to solve the problem ? as we could not find the value of "LC amount mentioned against the Service entry sheet in PO history" in both the tables ESLL & ESLH.
warm Regards,
Anil Shanbhag

PI 7.1 System copy Devline does not exist: 8a5afe612d3511df97170017a4a7b84d

Similar Messages

Maybe you are looking for