PI 7.11 - Alert creation for RFC Exceptions does not work

Hi folks!
In our PI 7.11 SP04 system we have created an Alert Category as well as an Alert Rule to be informed about errorneous messages in the Integration Engine (ABAP).
The scenario is synchronous SOAP Axis to sRFC, where the RFC answers with an exception that is transferred to a SOAP Fault response message.
Now we see messages with Application Errors in the Integration Engine, but no alert is created. Having a look at the alert creation log using report SXMSALERT_LOGREADER shows us that the system even does not try to create an alert for these messages. Alerts are only created for errors in the Adapter Engine.
Question:
Why does the system not create alerts in this case and how can we achieve this?
Thanx for any hint!
Kind Regards,
Volker

Hi!
Additional information for all:
When forcing an error like "receiver not found" both kinds of alerts are created: AE Alert and IE Alert. Thus in general the alert configuration and the alert rule for IE errors are correct and working - only not for RFC exceptions ....
Regards,
Volker

Similar Messages

Logfile monitoring for MSSQL ERRORLOG does not work with sapccmsr

Hi
We are running MSSQL2005 and wants to monitor the ERRORLOG for certain patterns, using the logfile monitoring feature of SAPCCMSR.
We are using logfile monitoring with sapccmsr for a lot of other logfiles without problems, but for ERRORLOG is does not work!
To be more precise: The agent does not report alerts for the text patterns specified. The agent runs fine and in RZ20 we can see that the logfile are checked every minute (but without finding the patterns).
The strange thing is that:
- It works for all other logfiles
- If we do a "type ERRORLOG >> <new file>" and runs the same monitoring on this "copy" of the ERRORLOG then it works
Any ideas?
Best regards
Tom Bo

Hi,
Please look at SAP note 1013331 https://service.sap.com/sap/support/notes/1013331.
In special the changes after patch collection 2007/5.
Practical you have to use a unicode CCMS Agent to monitor the ERRORLOG file of SQL2005, and add the "ENCODING=UTF-16" parameter in the template file....
hope this helps..
Regards
Rolf

My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?p

can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?

The problem is I cannot turn on wireless setting. The "sign in to icloud -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again. If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work. Vicious circle.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution.

[svn:fx-trunk] 7473: Fix for 'ant asdoc' does not work.

Revision: 7473
Author:   [email protected]
Date:     2009-06-01 12:09:26 -0700 (Mon, 01 Jun 2009)
Log Message:
Fix for 'ant asdoc' does not work.
It should now work from both svn and package zip.
Bugs: SDK-15306
QE Notes: None.
Doc Notes: None.
tests: checkintests
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15306
Modified Paths:
    flex/sdk/trunk/asdoc/build.xml
    flex/sdk/trunk/build.xml

HT3702 how do I cancel an application that I am being billed for monthly that does not work

How do I cancel an application that I am being billed for monthly that does not work anymore?

How to report an issue with Your iTunes Store purchase
iTunes Store: Purchasing and managing auto-renewing subscriptions

File Attributes from App Server by RFC (GET_FILE_ATTRIBUTES does not work )

Hello,
We have an Objects application that is started through an RFC BAPI call from a Java app. The Java app. passes a file to the BAPI. We want to test, as efficiently as possible, if the file is 0 bytes long. We have tried /epsf/get_file_attributes but there is a problem with it being called remotely. We have Remote Enabled the function module. Local tests work fine (GUI User), but when it is called by the Bapi(Technical User) we receive sy-subrc = 2. I think it is referring to a 'Communication Error'.
I found a nice class, CL_GUI_FRONTEND_SERVICES for the workstation server, but nothing comparable for the application server.
Help is greatly appreciated as I am pulling my hair out.
Best Regards,
Mark Lengel

Hello Andreas,
The GET_FILE_ATTRIBUTES fm is also from the EPS Function Group and provides the file size, it just does not work when called from Rfc/Bapi. Won't the GET_DIRECTORY_LISTING fm just return directory info ?
I am afraid I will have to resort to the OPEN, READ, CLOSE DATASET steps in order to check for a zero length file.
Regards,
Mark

Quicktime plugin for screen capture does not work in flash player 11.2

Hello,
I have created a quicktime plugin (it is .component file) for screen sharing purpose.
I have used quicktime framework for that. plugin is detected in flash player.
This plugin is working perfectly for flash player 11 and below.But,
It does not working in latest flash player 11.2.
I have seen following error on console -
Google Chrome Helper EH[240:e92b] *** QTCaptureSession warning:
Session received the following error while decompressing video:
Error Domain=NSOSStatusErrorDomain Code=-8974
"The operation couldn’t be completed. (OSStatus error -8974.)".
Make sure that the formats of all video outputs are properly configured
Note - Compression format used in plugin is kBMPCodecType.
Please, help me.

The issue ended up being the change in resolution to my external monitor. Flash was unable to detect the proper coordinates of the color I was trying to select because I was running my monitor in HD mode rather than selecting an actual resolution from my monitor preferences. Changing the settings to an acutal resolution, instead of generic "HD mode" fixed the issue.

F4 help on Parameter for ddic domain does not work

Hello,
I try:
Parameters: pa_waers TYPE WAERS.
WAERS is a ddic data element for currencies and also a domain with this name exists. The domain WAERS has a check table TCURC.
When I press F4 for my field PA_WAERS in the Selection Screen, I assume a value help from the check table TCURC.
I activated and re-generated my coding (as mentioned in the ABAP-Keyword help for "PARAMETERS") but it still does not work.
Does anybody has a clue why this does this not work.
The same thing is for a parameter:
Parameters ..... type CTU_MODE.
Domain CTU_MODE has value Fields (A, E, B) but also here on my program no F4 help occurs.
Thanks in advance
Stefan Berger

A value table is assigned to a domain. It becomes a check table when a foreign key relationship is established for a field in a table. The field uses the data element and the data element uses the domain.
For example, if you try:
PARAMETERS: PA_WAERS TYPE EKKO-WAERS.
You will get the F4 help you are looking for. If you use tran SE11 and view EKKO, find field WAERS, use tab Entry Help/check and you will see that table TCURC has been established as a check table. You can use the foreign key button to see the relationship that has been established between EKKO and TCURC.
Also, domains cannot be used to type a field. Your reference to CTU_MODE must be referring to a Data Element. I tried this in a 4.7 system and the F4 works for me. What version are you using?

Roboform adapter even for latest Firefox does not work..

I have tried all workaround given in this forum , but still roboform plugin does not work for latest version ( 24) does not work , it dsplay first time when you install FF , but next time it disappears. Any solution ?

I have download roboform from here [http://www.roboform.com/ Roboform] and i have installed it on my laptop. at the end of installiation i see the roboform toolbar in firefox and it operates normally. try again See also [https://support.mozilla.org/it/questions/974226?esab=a&s=&r=8&as=s https://support.mozilla.org/it/questions/974226?esab=a&s=&r=8&as=s] You must remove your old toolbar before install the new version of roboform 7.9.2.5

New Release QuickVPN client 1.4.0.5 for windows 7 does not work????

New release of QuickVPN client version 1.4.0.5 for windows 7 is not working properly.
We can not connect; instead we receive this message:
"Remote Gateway is not responding, do you want to wait?"
Dear Cisco,,,,
Your release is not complete; please correct issue and advise after it has been tested.
Rgds, EM

Hi, first disable this POLSTORE.DLL again in your QuickVPN-Folder. Then start in this folder IPSEC.MSC and than IPSEC.EXE. You should get from IPSEC.EXE the error above. If not, than any other problem you have. Follow all the hints here in this thread.
If you get the same error above, than enable this POLSTORE.DLL again and start the IPSEC.EXE. You get the full info what has been gone. And within the IPSEC-Window for Local Computer you may find this FREESWAN-setting.
B.t.w. before I went this way I did export and import the IPSEC-settings from the XP-machine, as it was hinted some posts earlyer. But the way I have gone, works also with manualy deleting the FREESWAN config. With the IPSEC.EXE it will new generated in any case.
When you start via QuickVPN you may monitor also what happens within this IPSEC for Local Computer. Press F5 to keep it aktual.
From time to time the connection gets only succeeded after the second and more times. I have a very slow UMTS Internet-Access.
Juergen
Adding: These effects, getting not connected, first and during the VPN-Tunnel exists, has not changed since the top-first Version of Quick-VPN.
Dear customer, be patient, don't care about these stupid messages, click again or when the connection allready has succeeded through the VPN-tunnel do what you did like to do.
...... and again, with which configuration-scenario do the guys at Cisco test and develop .....
Fortunately, I never was a Cisco partner, only a poor user ;)

Mapping Network Drive for external user does not work

I want to map a beehiveonline.oracle.com network drive. I am using https://beehiveonline.oracle.com/content/dav/# as mentioned in the FAQ.
Using https://beehiveonline.oracle.com/content/dav/ (without the #) does not work either.
I am able to map this network drive when using [email protected] as user.
However when trying to do this for the user [email protected] I am not able to map the drive.
I am testing this in order to simulate the client to map the network drive.
Logging on the beehiveonline with the user id [email protected] works fine.
Your help will be greatly appreciated.

Ah, We have had one other case of this where an account can access BeehiveOnline OK but cannot get the webDAV to work.
I did notice a few login failuers stating your account did not exist on the system. This can sometimes happen if there is a conflict between username and loginid - I have set them to be the same and this may help.
Try again and let me know how it goes.
Phil

Voice Over for tracks & artist does not work

My sister has just bought FOUR new iPod shuffles 4th gen, im busy trying to set them up for the kids before xmas - it turns out that the voice over for tracks and artists does NOT work even though its installed and the ONLY fix i can find is to MANUALLY apply ENGLISH (UK) language settings to each track after theyve been put on... now SURELY this isnt right...?
can anyone help with thise?
thanks

Ok so the "is it plugged in" kind of troubleshooting question is...
When you plug in the iPod, go to the summary page of the iPod, there is a check box to enable Voiceover on that iPod. Is that checked?
Patrick

RFC Destination does not work for /sap/xi/adapter_plain service

Hi
We are facing a strange issue. Our business partner is trying to connect to our XI box, RFC Detination type 3 through a reverse proxy at our end. If he used /sap/xi/engine service, he gets a 500 response " empty request received". Howerevr if he connects using /sap/xi/adapter_plain, he is not getting any response, just a green tick at the bottom with no message. SMICM shows " wrong content in header response"
Regards
Monika

Hi
We are able to send data to our business partner. When he is trying to send data to us, he is not able to do so.
He needs to do so via a reverse proxy. We have replicated the scenario on our side to cross check.
We are able to connect to our XI with http/https without reverse proxy. However with reverse proxy we are not able to do so.
Also in case of http without reverse proxy, the message processing does not happen even thought RFC Connection test is successful/
Regards
Monika

PI 7.11 - Alert creation for RFC Exceptions does not work

Similar Messages

Maybe you are looking for