PI 7.11 handling EOIO Backlog in Engine Status for a Receiver Component

Hi
In our PI 7.11 we have for more days had an EOIO Backlog of 120 messages for one of our receiver components when checking the Engine status Backlog tab (RWB -> Component Monitoring -> Adapter Engine -> Engine Status -> Backlog tab -> Receiver Components section)
My question is how I can process the backlog. There is nothing to see in either smq1/smq2/sm58 on the PI system or in smq1/smq2 on the receiver system.
Thanks in advance.
Mikael

HI,
Go to MessagingSystem of the server and there the option for the EOIO Sequence Monitoring will be available and can make use of that...
MessagingSystem link is http://host:port/MessagingSystem there the message which bloking the other messages can be seen...
HTH
Rajesh

Similar Messages

Messages are stucked in EOIO Backlog, please help me...

Dear Expert,
I am facing an issue the messages are stucked in EOIO Backlog, Those stucks are not flowing. why it is stucking in Engine status or backlog monitor.
and how it will reprocess those messages.
Regards,
Kiran Polani

Dear Friends,
Actually we developed an Idoc to soap synchronous using BPM in sap pi 7.0. suddenly required changed in field lever at sap r/3 side that's why we stopped communication channel for that interface.
But when we are stopped that interface it is stuked in EOIO Backlog and it is stayed in Holding state. Daily the message count is increasing. But here from sap they are triggering data for same idoc.
For that i have discussed with our team and deleted that interface in existing production enviroment.
now those signals are not stucked in Engine status EOIO Backlog. But my problem is how to delete or cancel existing not flown EOIO messages in Engine status.
Please find the screen shot for your reference.
Regards,
Kiran Polani

Messages are in Backlog without any status

Hi All,
Today morning when I came and observed that, in the Engine-Status page i saw some 3000 messages under column
"Processing Backlog (without errors)". When I went into Messaging Overview Tab, I see these messages are in 'To Be Delivered' status. Now How to reprocess these messages? Can anyone tell me how come out from this situation?
Regards,
Rahul

Hi Achaari,
This is related to Queues problem.U r messages are struck in Queues.Please do following steps.
1)Go to SMQ2.Then check ur queues.if u found any queues just select it and activate the queue.It will automatically sent the data.
2)Go to SXMB_ADM->Manage Queues->Register Queues->Activate Queues.Before doing this activity in SXMB_ADM please delete or activate the queues in SMQ2 other wise it will give error.
3)Cancel the System Error Messages in Adapter engine in RWB Message Monitoring.
4)Refresh Cache Objects SXI_CACHE.
Thanks
Ravi

No script engine supported for 'JScript' error in OBIEE 11G ibots

Infrastructure: 64 bit OBIEE 11.1.1.5 on 64 bit Red-Hat Enterprise Linux 5.6
We tried using *.java to export the delivery content of an 'Agent' and place it in a shared folder on Windows.
We are able to use the .java file directly in putty and it works fine in creating a folder and copying the file from source to target, but when we put the same script as part of the actions in the 'Agent' properties, its fails with the error "[nQSError: 66023] No script engine supported for 'JScript'". The e-mail is triggered and the attachment is delivered fine.
We tried the same with a *.js file. The error is the same. I found people using *.js scripts and they say it worked for them at Re: How to send the content of an agent (PDF Report) to local machine in 11g
But I am not sure what are the other settings that should be done. The error seems very basic and fundamental and has something to do with java interpreter or something.
Any help if you have implemented the same, would be greatly appreciated.
Thanks!

That example in the link shows creating an action at the end of 'Agent'. I am not sure if that is what the user meant by 'create an action'. If the user meant to create an 'action', how does and where we call that action at the end of an 'Agent'?
I did try creating an action by updating the 'UserScript.js' file, but the moment i update the file with a custom function, the server doesnot recognise the UserScript.js file anymore and i cannot even use the default functions in UserScript.js file.

Handling Fault Messages for JDBC Receiver (Syn Inbound)

Dear Freinds,
Can we handle fault messages for JDBC Receiver which is synchronous.
OB Proxy Syn <> IB JDBC Syn
1. How to handle the same ? Please give some examples.
2. Should we use Stored Procedures at Oracle side to handle the fault messages and send back as response to the Proxy Response. Will it work.
Thanks & Regards
K.Ramesh

Dear Friend,
I have 2 interfaces where Proxy is OB & JDBC is IB. In the first interface both sender and Receiver are synchronous and in the second one it is Async.
In the first interface i have to send one field from R/3 table along with Native SQL query string to XI and the response of the SELECT query is sent back to the sender.
Assume if no fields are selected based on the field sent then proper error message has to be sent instead of the response message.
In the second interface i will be using UPDATE query at Asyn JDBC receiver.
How to do this if you are having JDBC Receiver.
I saw in many blogs where they had mentioned that we cannot handle fault messages in the Receiver JDBC.
KIindly explain.
Thanks
K.Ramesh

Please create "on-the-fly change search engine" option ALSO for when we mark [word] in a text, then right-click, then choose "Search [engine x] for [word]"?

In Firefox 34, you have changed the search bar.
The new style is perfect for those who always starts by typing in, letter for letter, the search term.
People such as myself, we almost never type in the search term,
but instead we mark a [word] in a text, right-click this marked [word], then select "Search [engine x] for [word]".
Speaking for myself, I have now a total of 36 search engine providers, but I usually only use 7 of those.
I use "Wikipedia (English)" most of the time..
- but then I will switch to e.g. "AniDB" and use that one for 1 hour..
- or switch to "Google" and use that one for 30 minutes..
- or switch to "Wikipedia (Norwegian)" and use that one for 2 hours..
- or switch to "Wiktionary (English)" and use that one for 15 minutes..
..and then I will switch back to "Wikipedia (English)" again.
The way the search bar was in Firefox 33 and earlier, I could very easily switch the default search engine.
Just one click to open the drop-down menu, then choose one.
In Firefox 34, I have to choose "Tools" -> "Options", the "Search" tab..
- before I can THEN click to open the drop-down menu.
4 clicks instead of 1, that's like 400% more work..!
Also, the fact that I have to go into "Options".. make this..
..I don't know how to put it, it's a kind of psychological barrier that I have to overcome each time.
I mean, before Firefox 34, I went to the "Options" window like maybe 4 times each YEAR,
now, I have to go there 4 times each DAY..!
I am not saying you should revert to the old style Search bar,
as I feel that those you are typing search terms are indeed very happy for this new style..
Instead, I think of 2 possible ways to create happiness also for us that do mark text and choose "Search.."
1) An "on-the-fly change search engine" option ALSO for when we mark [word] in a text, then right-click, then choose "Search [engine x] for [word]".
This could work as a cascading menu option, where it says..
Search for [word] in -> [engine x]
..and where [engine x] was the current default engine, and all the other engines was listed underneath,
just like the drop-down menu when you switch the default engine.
Additionally, you could have an on / off checkbox in the "Options" "Search" tab, where you had this option:
"Change default search engine when choosing another from the drop-down menu"
THIS would actually be PERFECT.. It would be even much BETTER than in Firefox 33 and earlier..! :-)
2) If there are things with the first option that don't work (something I've missed etc),
then maybe you could have an on / off checkbox in the "Options" "Search" tab, where you had this option:
"Use old-style search bar"
This would be off by default, but when switched on, it would give us the old Firefox 33 style Search bar.

Strongly recommend Context Search extension which will solve your problem
- https://addons.mozilla.org/en-US/firefox/addon/context-search/?src=search

What handler is called when a Status-Bar-Icon is clicked in Cocoa-Applescript?

In Cocoa-Applescript Xcode, what handler is called when the Status-Bar-Icon for my app is clicked? Are there any variables or connections that I have to make?

Thanks Red_menace! I don't know what the Apple community would do without you.
For others viewing this question, the following is the proper format, for Cocoa-Applescript:
property NSStatusBar : class "NSStatusBar"
property StatusItem : ""
on applicationWillFinishLaunching_()
set StatusItem to NSStatusBar's systemStatusBar's statusItemWithLength_(current application's NSSquareStatusItemLength)
StatusItem's setAction_("myAction:")
end applicationWillFinishLaunching_
on myAction_()
say "Hello!"
end myAction_
Where "myAction:" is the action that you want to call when the Status-Bar-Item is clicked. It should also be noted that this handler will not be called if a menu or view is already linked to it's click action.

Change status for 18 million messages in the Integration Engine

Hello there!
I have the following situation and I wonder that maybe you could help. Currently I have more than 18 million messages for the BC_XMB object in the Integration Engine for a BI System (connected to a PI system).
The problem here is that the archiving/deletion jobs in this BI system are faulty since maybe a couple of years ago and all of these messages are marked as "Archivable":
What I'm trying to do here is to change the status for these 18 million messages from "can be archived" to "to be deleted" since there is no way that I can archive this 18 million messages (filesystem capacity). I've been looking many option but I cannot figure out how to do it.
Maybe, if you know an alternative way to do this, I will be very pleased to hear it.
Thanks a lot in advance.
Carlos

Raghu.
I've done the following:
1. I've executed SE38 tx code.
2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
4. There are no available variants, so I clicked on the "Execute immed." button.
5. The job starts. I can monitor it on the SM37 tx code.
6. It only deleted 20 messages.
What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
what do you think of it??
regards
Carlos.

Empty the queues in Engine Status

Hello,
We've got some queues in the Engine Status (chosen from the RWB --> Adapter Engine <SID>) that seem to contain erroneous entries. Nothing is processed (nothing to see in communication channel monitoring), although in the Engine Status --> Additional Status I can see entries in the queue and the system thinks it's having 5/5 processes active. In SXMB_MONI the messages all have a finish flag, but the acknowledge status is "still awaiting acknowledgment".
I'd like to cleanup this queue by simply deleting the messages it contains, but I'm not able to do that anywhere. Doen anybody have an idea on how to do this?
Kind regards, Wilbert

>
Wilbert Jeuken wrote:
> Hello,
>
> We've got some queues in the Engine Status (chosen from the RWB --> Adapter Engine <SID>) that seem to contain erroneous entries. Nothing is processed (nothing to see in communication channel monitoring), although in the Engine Status --> Additional Status I can see entries in the queue and the system thinks it's having 5/5 processes active. In SXMB_MONI the messages all have a finish flag, but the acknowledge status is "still awaiting acknowledgment".
>
> I'd like to cleanup this queue by simply deleting the messages it contains, but I'm not able to do that anywhere. Doen anybody have an idea on how to do this?
>
> Kind regards, Wilbert
In SXMB_MONI the messages all have a finish flag, but the acknowledge status is "still awaiting acknowledgment".
~~~~
try to cancel the messages. Else you will have to wait for them to time out since they are waiting ack.
Last option try to restart the java stack and then clear the messages by canceling them.

In my Component monitoring i got this error for Adapter engine status.

In my Component monitoring i got this error for Adapter engine status. Status is in red..
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
Please clarify ASAP..
Thanks..

HI,
See below links you will get ..
Process Integration (PI) & SOA Middleware
ERR:Could not find SLD name for XI Application "DIRECTORY"
Unable to find an associated SLD element
Regards
Chilla..

The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location

Could anyone please help in resolving the following
error:
Server Error in '/BizTalkXXXMyAppWcfService' Application.
The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc".
Please verify that the receive location exists.
It does exist: When I go to All Artifacts >> Receive Locations I can see: WcfService_BizTalkXXXMyAppWcfService/XXXMyApp
Also it is Enabled, green, up and running.
…and that the isolated adapter runs under an account that has access to the BizTalk databases. – Checked, the BizTalkUser has all the permissions to access BizTalk databases.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive
location exists, and that the isolated adapter runs under an account that has access to the BizTalk databases.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0xc0c01666): The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive location exists, and that the isolated
adapter runs under an account that has access to the BizTalk databases. ]
   Microsoft.BizTalk.TransportProxy.Interop.IBTTransportProxy.RegisterIsolatedReceiver(String url, IBTTransportConfig callback) +0
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +318
[AdapterException: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc"; receive location does not exist or is disabled.]
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +875
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +363
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132
[ServiceActivationException: The service '/BizTalkXXXMyAppWcfService/XXXMyApp.svc' cannot be activated due to an exception during compilation. The exception message is: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc";
receive location does not exist or is disabled..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +890624
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +180062
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107

Hi,
This seems to be a permission issue.
Makesure account used in the application pool is a member of the BizTalk Isolated Host Users group.
Also its working considering either make the ASPNET user account a member of your BizTalk Isolated Host Users group to make sure it has access to the biztalk databases (or change the asp.net services to run under a different account, which would need
to be done from the framework's core .config files)
Regards
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

All search engines bad for partition

We are getting this error in logs. Not able to identify the root cause for this. Please let us know if anyone has any idea on this error.
Error1: 2012-08-27 00:02:02,572 ERROR [nucleusNamespace.atg.search.routing.RequestDispatcher] (http-0.0.0.0-8080-4) There are no search engines available to process this request.
Error2: 2012-08-27 03:55:12,235 ERROR [nucleusNamespace.atg.search.routing.RequestDispatcher] (ajp-0.0.0.0-8009-72) All search engines bad for partition: Segment: 9000352, id: 7839, server: null, responseSize: 0, startTime: 1346057712235, ttl: 40000, attempts: 2, complete: false, error?: <none>, dispatcher key: atg.search.routing.dispatch.DispatcherKey@9f4e771, request: Request ID: 2616, complete segments: 0, ttl: 20000, elapsed time: 5, complete: false, timed out: false
2012-08-27 03:55:12,236 ERROR [nucleusNamespace.atg.search.routing.RequestDispatcher] (ajp-0.0.0.0-8009-72) All search engines bad for partition: Segment: 9000353, id: 7840, server: null, responseSize: 0, startTime: 1346057712235, ttl: 40000, attempts: 2, complete: false, error?: <none>, dispatcher key: atg.search.routing.dispatch.DispatcherKey@2d86b0d2, request: Request ID: 2616, complete segments: 0, ttl: 20000, elapsed time: 6, complete: false, timed out: false
2012-08-27 03:55:12,236 ERROR [nucleusNamespace.atg.search.routing.RequestDispatcher] (ajp-0.0.0.0-8009-72) All search engines bad for partition: Segment: 9000354, id: 7841, server: null, responseSize: 0, startTime: 1346057712236, ttl: 40000, attempts: 2, complete: false, error?: <none>, dispatcher key: atg.search.routing.dispatch.DispatcherKey@65c2c257, request: Request ID: 2616, complete segments: 0, ttl: 20000, elapsed time: 6, complete: false, timed out: false
2012-08-27 03:55:12,236 ERROR [nucleusNamespace.atg.search.routing.RequestDispatcher] (ajp-0.0.0.0-8009-72) request failed: Request ID: 2616, complete segments: 0, ttl: 20000, elapsed time: 6, complete: false, timed out: false

Hi Straydog,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps!

Remote engine status

Is it possible to check the remote engine status before calling a remote sequence (to prevent an error that'd terminate the sequence)?
There's a "Check Remote System Status" under LabView Utility but that's for the remote LV Engine only.
Thanks in advance.

Terago,
I did some more reasearch and talked to our R&D department and it seems as though there is no method to check the status of a remote TestStand Engine. Since the feature you would really like to have is not currently included in TestStand you could file a Product Suggestion so that it can be considered for future versions.
Yet we can still workaround this limitation. You could setup something similar to what I suggested in my previous post, or it was also mentioned to me you could try to run a dummy sequence to test the engine status. With the dummy sequence call you could loop on that step and treat it as a 'ping' to the remote machine. Then, when you get a succesful call to that remote machine, you could launch the real remote sequence you want to use.
Hope this helps!
John B.
Applications Engineer
National Instruments

Engine status and shutdown tag engine

I have an easy question... but it's not so easy that I can actually find documentation on it.
Is the tag engine status.vi considered a VI that accesses the tag engine?
I ask because the tag engine will not shutdown until all VI's that access the tag engine are shutdown. I would like a while loop checking the status of the tag engine to run until the tag engine is shutdown.

Hi,
The 'Get Engine Status.VI' does not access the Engine. (You can check this and any such VI by dropping it on the diagram and running it. If the Engine is launched, the VI in question accesses the Engine.)
The 'Get Engine Status.VI' is meant for things like what you're trying to do. In fact, the HMI Wizard generates such a while-loop with this VI.
Hope this helps.
Rgds,
Khalid

Why QoS is EOIO in Adapter Engine

Hi,
We have scenarion: ABAP Proxy -> XI -> JMS.
In ABAP Program, we did not specify EOIO settings. At runtime, we checked the messages passing through IE, the QoS is EO, this is expected.
However when message reach Adapter, it became to "EOIO".
Any idea about this ? or is this default setting in Adapter Engine ?
Thanks inadvance.
Liang

After investigation, we found out the reason:
Our mapping program have message splitting.
If you pass source message only contain one transaction, the QoS in adatper remain "EO", if we include mutiple transactions in source message, then "EOIO" automatically applies on adapter engine.
Anyway, thanks reg for your reply.
I close the thread as we know the reason.
Liang
Edited by: Liang Ji on Mar 26, 2008 8:31 PM

PI 7.11 handling EOIO Backlog in Engine Status for a Receiver Component

Similar Messages

Maybe you are looking for