PI 7.31 Single Stack

Hi All,
Do we have a document or link which points to all the settings that are needed to be done in PI when using RFC,Proxies,IDOC and other adapters from dual stack to single stack. Basically the settings needed for these adapters when communicating in single stack environment. Also pre-requisities needed to do a system readiness check before starting development.

Hi Amit,
The below blogs and document would be useful
Generate a Migration Report from PI Dual-Stack to AEX
Moving Integration Directory Artifacts from dual stack to single stack
SAP tool to migrate dual stack ID objects to Integrated Configuration Objects (ICO) - PI 7.3 EHP1, SP07
Migration Guide to AEX of PI 7.3x for Integration Scenarios
regards,
Harish

Similar Messages

How to put a single stack item to an album?

Maybe a silly question, but I can't find out how to put a single item from a stack into an album. When I drag a stacked item to an album, the entire stack appears in the album. This is not what I want, I want to get the single item in the album.
I know I can make a single stacked item in an album to be the albumpick. But this is not enough. Sometimes I need to put two items from the same stack into this album.
Koen
Message was edited by: Koen van Dijken

Koen van Dijken wrote:
Would this be as designed, and so a wrong use of stacks by me?
It is as designed but I don't think what you want to do is a particularly wrong use of stacks. I can see using stacks as a way to reduce clutter in the browser but still wanting to be able to get to individual images in the stack to use..
What is interesting is the wording in the Aperture users guide concerning stacks:
Dragging Stacks
You can drag an entire stack to a new location, *and you can drag specific images within a stack to a new location*. When a stack is closed, dragging the stack moves the entire stack. *When a stack is open, you can drag individual images to new locations in the Browser*. You can also drag images into a stack. If you drag an image within a stack into a different project, however, the entire stack moves to the new location.
(emphasis added)
So the first part sounds like you should be able to drag an image out of the stack to an album, the second just mentions dragging an image out of the stack in the browser.
And in way you can do this, the only thing is what you end up doing is unstacking the image you drag out. Not exactly what you would want to do.
I think it should be OK to place individual stack items into albums and have them remain in the stack. Any reason this would be a bad idea?

How to get Test Utility for PI 7.3 Single Stack JAVA only.

Hi All,
We are having PI 7.31. Single Stack JAVA only.
we want to test some scenario. Can anybody tell me how can i test the scenario in PI 7.3
is there any test utility by which i can send some test messages to PI 7.3.
from where to download this utility.?
Regards,
Umesh

Hi,
The test message functionality is currently available in PI dual stack only..
Lets hope that in future releases this functionality may available in Single Stack also.
Regards,
Mastan vali

PI 7.1(dual stack) and PI 7.31(Single stack) -

Friends,
I have a proxy to proxy scenario - Proxy --> PI --> Proxy
We have two servers PI 7.1(dual stack) and PI 7.31(Single stack)
i did the development in ESR and my ESR is pointing to PI 7.1, when i execute the scenario i receive one error message "receiver could not be determined", i ensured that all my input is correct, still i get the same error message.
the expectation is my scenario should point to PI 7.31, Can some one help me where and what settings i need to make in-order to make it work.
Please Note: All my data is correct and i read some scn forums wherein they asked to refresh the cache , i have refreshed the cache also still the problem persists.
Thanks in advance!

Iñaki Vila
Communication component in ID is the same as sender side.
could you share your sender configuration?
Did you mean Tcode - SXMB_ADM and under that Sender/Receiver configuration
Krupa Rao Atluri
In ID steps are correctly defined.
I spoke to my colleague he hinted that at RUN TIME we want to point to PI7.31, he mentioned config change needed in SXMB_ADM
any further inputs from any one could be useful.

SAP PI 7.3 Single stack- Set tracing and logging

Hi experts
We have configured a SOAP to SOAP sync scenario in SAP PI 7.3 single stack(Java Only).
I have sent some test messages from WSNavigator to PI .
But when i checked messages in adapter engine, it is showing*"Unable to retrieve payload or you don't have sufficient authorization to view the content" I am able to monitor payloads of Async messages.
How can we set Logging and trace levels in Single stack PI? I couldn't find any options in RWB os NWA.
Thanks,
Dhanish

Hello Dhanish,
As it was stated by Kenneth in his post, if you would like to see payload of a synchronous message in Message Display Tool (e.g. from Runtime WorkBench), you should set value of property messaging.SyncMessageRemover.removeBody of J2EE service XPI Service: Messaging System to 'false'. Please note that this affects only synchronous messages in final states (DLVD and FAIL).
Regarding the second part of your question - logging. In PI 7.3, you can persist the message in Adapter Framework in two ways - stage it or log it. Staging allows you to edit/restart the message later from the stage where the message was persisted and is relevant for asynchronous messages; logging allows you to only display the logged message and is relevant for both synchronous and asynchronous messages. Please also note that staging affects performance of message processing more greatly than logging, extensive staging (e.g. staging on several processing stages) can even be a reason of performance degradation for processed messages, so if you only need to display details of the message on different processing steps in Adapter Framework, logging should be sufficient. Both staging and logging can be configured using properties xiadapter.stage.conf (for staging) and xiadapter.logger.conf (for logging) of J2EE service XPI Adapter: XI.
Regards,
Vadim

How to send a text attachment by using jdbc to mail scenario Using single stack 7.31

Hi Experts...
We are currently Single Stack SAP 7.31
I have a Scenario that is "JDBC to MAIL" ...here i need to pick a data from data base and i have to sent that data as a .txt attachment to mail by using mail adapter...
here i have created DT, MT SI, MM,OP > ESR PART
when coming to ID > BC,CC,ICO
Were all the channels are running... MESSAGE ID is generated ... But I was not getting any MAIL to my Email ID...
While i was configuring the RECIEVER mail communication channel i have seen the tab that is "MODULE CONFIGURATION"
DO we have to do any MODULE CONFIGURATION.. If it is needed please let me know how to do....?
It would be appreciated can some one explain me step by step Of this MODULE CONFIGURATION ... Are send me some SCREEN CHARTS OR LINKS to under stand......
Thanks in Advance ...!!!!!!!!!!!!
Thanks,
vinay

Hi Experts...
We are currently Single Stack SAP 7.31
I have a Scenario that is "JDBC to MAIL" ...here i need to pick a data from data base and i have to sent that data as a .txt attachment to mail by using mail adapter...
here i have created DT, MT SI, MM,OP > ESR PART
when coming to ID > BC,CC,ICO
Were all the channels are running... MESSAGE ID is generated ... But I was not getting any MAIL to my Email ID...
While i was configuring the RECIEVER mail communication channel i have seen the tab that is "MODULE CONFIGURATION"
DO we have to do any MODULE CONFIGURATION.. If it is needed please let me know how to do....?
It would be appreciated can some one explain me step by step Of this MODULE CONFIGURATION ... Are send me some SCREEN CHARTS OR LINKS to under stand......
Thanks in Advance ...!!!!!!!!!!!!
Thanks,
vinay

PI 7.31 (single stack) posting to RFC configuration gives this error: om.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: String index out of range: 0 (raised by system extern ...

Getting cryptic error while trying to post to a custom RFC from PI 7.31 single stack.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: String index out of range: 0 (raised by system <extern>|pidevhost)
Does anyone recognize this error and/or know of detailed instructions for registering custom RFCs in PI 7.31. I could possibly have configured the target wrong but no error says so.
This is a File-->PI-->RFC scenario. The file processing is super simple and a configuration I have used successfully before. I would assume I'd get a different error if it couldn't parse the file.
Jody

Not shure if you already did but try getting some details with XPI Inspector. Also increasing log level for this category might help. You also may wanna check authorization (even if this should show with a different error text) in ECC using ST01.
My guts feeling is that there is something wrong with payload / signature of RFC.
Cheers
Jens

How to track the Inbound child IDOcs in PI 7.4 Single stack

Hi Friends,
I would like to know the procedure of tracking the Inbound child IDocs in PI 7.4 Single stack.
Here is the detailed description.
Say we are getting the data from third party system and the message may have multiple IDOcs in it. The message has processed successfully from PI and reached to the target system(ERP). So, now my question is how to track the IDOc count with in that message.
Please suggest on the same.
Thanks in Advance,
Venkateswarlu.

Hi Hareesh,
Thanks for your inputs. According to the link IDOC Status, Tracking in SAP PI/PO Single Stack I am thinking the required funcionality is not there in PO 7.4, but still i would like to have little more clarity before moving further.
I will explain what what was happening in PI 7.11 so that you can understand what i am looking for in PO 7.4.
We will get the data from third party system in xml format, we had to search for the messages based on interface name and time range within SXMB_MONI. After getting the result(say the output is 100 messages), we will download the values of "Outbound Reference" field(which is a key to find the child messages for messages resulting in an Interface Collection). Below is the snap of Outbound Reference field for your reference.
Now we will go to the table IDXRCVPOR in SE16(within PI) and put the values of Outbound Reference field in Text 24 and execute. Here we will get all the child messages.
Now please let me know if this kind of scenario is possible in PO 7.4.
Thanks,
Venkat.

SOAP Lookup in PO 7.30 Single Stack.

Hi,
I am creating a scenario from HTTP to File . In between Message Mapping has SOAP Lookup .
But While I executing the Sceanrio, I am facing some error .
Now While reading lots of Blogs over Internet , Some of them pointed towards Creating a Dummy ICO (mandatory in PI 7.30 ) for SOAP Lookup.
So Now my Question are :
1. Why are we creating this Dummy ICO ?? what is the purpose ??
2. How do we create it ?? - Need to know abt Sender Service Interface , Sender Communication channel , Receiver Service Interface ??? What would be these values while creating a Dummy ICO ???
Regards
PS

Hi, the dummy ICO is actually not needed for the lookup, but may fix a bug as stated in your previous thread http://scn.sap.com/message/14054811#14054811 as well as it is meant to test and verify that your SOAP receiver actually works.
Did you follow SAP Help Using the Lookup API in a Message Mapping, especially using a mapping parameter of type Adapter and using the parameter as demonstrated in Implementing Lookups Using SystemAccessor?
I see in your previous thread Error while SOAP LookUp in PI 7.3 Single Stack. that you hardcoded the channel name and business component to retrieve the channel
Channel channel = LookupService.getChannel("BC_Successfactors_Two_D","CC_SOAP_Receive_SessionCreate");
Implement as recommended by SAP Help (above links) may be it solves your problem.

PI 7.4 Single Stack support for Principle Propagation SAML

Hi Folks,
Que: Does the single stack now support Principle Propagation using SAML?
The posts I have read so far conclude that SAML is only supported on the dual stack, not the single stack.
SAP Help gives steps for dual stack: Configuring Principal Propagation (SAML) - SAP Help Portal
This post from 2013 concludes no support for SAML in the single stack: PI 7.31 AEX - Principal Propagation
My time would better spent looking for an alternative solution for Principal Propagation rather than chasing something which is not supported (SAML on single stack).
Any help appreciated.
Che

Hi Che,
Please have a look at below blog
Principal Propagation using SAP Assertion Ticket CRM -> PO7.31 Single Stack
regards,
Harish

PI 7.4 single stack web service adapter alternative

Hi All,
Looking at upgrading from 7.11 dual stack to 7.4 single stack and I know the web service adapter is no longer available (at least according to anything I have read, but I understand it is in the pipeline).
How do we provide and consume web services on a single stack environment?
I have looked hard, but if the answer has been before me I have failed to recognise it due to my own limitations.
If someone could point me in the direction of any articles/blogs/discussions that answer my question or can answer the question I would be very grateful.
thanks in advance
Julian

Hello Julian,
WS adapter has not been migrated from ABAP stack to Java stack so far - so, in Java-only installation options of PI, there is no analogue for it from functional replacement perspective.
For web services consumption, the SOAP adapter can be used, but it is applicable for plain SOAP communication, not for WS-RM.
Regards,
Vadim

PI 7.4(Single stack) Idoc to file + additional done file

Hi All,
here the requirement : I want to convert Idoc to file in PI 7.4 (single stack) and send to FTP location with time stamp (eg: xxx_06082014123055.txt) and also need to create another empty file with same time stamp (eg: done_06082014123055.txt) after transferring xxx file. when the target system find the done file then it process the xxx file and deletes done file.
one way is I could create a 2 operation mapping and 2 service interface which will then configured in ID as two receiver interface mentioning 'maintain order at Runtime' pointing to same communication channel but the filename had to be created in UDF in mapping.
My question is , Is there any other alternative or better way to achieve this??
ur ideas pls....
Sha

Hi Sha,
You can use the multimapping concept, you will generate two messages and two files, with the second message only with its root element in order to create an empty file. Check these links to know more about the multimapping concept:
Multi-Mapping without BPM - Yes, its possible!
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90dcc6f4-0829-2d10-b0b2-c892473f1571?overridelayout=t…
Regards.

PI 7.4 Single Stack - OS Command and Java Mapping Trace

Hi,
Since ABAP stack is not avilable how to use the OS command and also want to know how to check the trace for java mapping since sxmb_moni is not avilable.
Please send me some link for 7.4 or 7.31 single stack document.
Thanks
Jignesh shah

Jo Jignesh,
Please see the document below.
Mapping Trace in SAP PI 7.31 Single Stack
Regards,
Jannus Botha

IDOC Status, Tracking in SAP PI/PO Single Stack

Hi All,
My PO version: 7.4, SP4. I am not sure my questions below are still a limitation in current PI/PO single stack systems, and hence requesting your help for the same.
1) Is there a way we can track outbound idocs in SAP PI/PO single stack similar to PI abap stack IDX5? ( Note:- I couldn't find any option in IDOC monitoring in single stack SAP PO 7.4, SP4)
2) IDOC status is always 0 in SAP PO 7.4 single stack IDOC monitoring. I am not sure if this status is just specific to my PO system. Any setting needs to be applied?
ps: Please post only relevant answers/solutions
Thanks,
Praveen Gujjeti
Message was edited by: Praveen Gujjeti

Hi All,
As per SAP help: Comparison of IDoc Adapter (IE) and IDoc Adapter (AAE) - SAP NetWeaver PI Reference Documentation - SAP Library idoc status and tracking not supported in current PO versions. May be SAP will add this feature in upcoming PO versions
Auditing, Monitoring ,and Tracing Functions
Attribute/Feature
IDoc Adapter (IE)
IDoc Adapter (AAE)
ALE Audit
Supported
Supported
IDoc tracing
Supported (transaction IDX5)
Not supported
IDoc monitoring
Transaction IDX5
Integration with channel monitor and message monitor (as part of Advanced Adapter Engine monitor)
Status tracking -SYSTAT
(analysis and further processing of messages that have not been processed)
Not supported
Not supported
RFC monitoring
Supported
Not supported
Message persistence in the IDoc adapter
Supported
Message correlation information can be stored in IDoc adapter.
Not supported.
Message is persisted in messaging system with correlation data persisted in adapter.
Regards,
Praveen Gujjeti

Archiving and Deleting of XML Messages in SAP NetWeaver PI 7.31 single stack

Hello my XI friends!
Need step by Step Guide to Archiving
and Deleting of XML Messages in
SAP NetWeaver PI 7.31 single stack
Similar to these instructions
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0afdd69-a8a7-2d10-7e9a-cbf6fa21c5a7?quicklink=index&overridelayout=true
Regards,
Rinaz

Please check the below blog for archiving java only-(XMLDAS)
http://scn.sap.com/community/pi-and-soa-middleware/blog/2011/11/16/aae-archiving-in-sap-pi-711-with-xmldas
For deletion there is standard delete job..
https://help.sap.com/saphelp_nw73ehp1/helpdata/en/48/b2e0036b156ff4e10000000a42189b/frameset.htm
Message was edited by: Hareesh Gampa

PI 7.31 Single Stack

Similar Messages

Maybe you are looking for