PI 7.4 - interface from ECC(idoc) JDBC, idoc not making it from sm58 '

Hi Experts,
I've got an interface which works in our dev and 2 of our test systems but NOT the 3rd test system. It doesnt work in our live system either. (essentially its a split receiver determination - goes to both jdbc and a file).
I've reintroduced the config from the dev system to the 3rd test system and overwritten its ico/scenario in the hope that it might work - it didnt make any difference as was getting the first error below in bold.
I've checked all RFC connections, destinations, partner profiles and ports, all seem in order and mirror systems that work, bar the naming conventions.
I've checked The FM version, its the same version as the system which works.
In sm58 I was originally getting the error 'Commit fault: ASJ.ejb.005043 (Failed in component:sap.com/com.sap.aii.ad', upon 'googling' this error it was suggested on SCN to essentially delete old config and reimport / rebuild the interface (Commit fault: ASJ.ejb.005043) . I've tried to reimport the config scenario / ico, i then deleted the config scenario and reimported it. This hasnt worked.
I have had our Basis team double check the NWA settings, and the ResourceAdaptor settings were reset.
When re running the trfc in sm58, i now get the error ' Failed to resolve repository reference @XI_IDOC_DE FAULT_DESTINATION_DEV'
Would appreciate some feedback as to what to try next..

Hi George,
We have seen this issue sporadically too while deploying to our QA system. What I have generally done in the past to get it working is the following (I have run all the steps because I don't know if they are all required to get it going again):
1. Open ID and clear the SLD data cache
2. Open sender system in ID and do compare of adapter specific identifiers with SLD and then apply
3. Deactivate sender IDoc channel and then reactivate (I would double check your destination in the settings also)
Hopefully this will help.
Regards,
Ryan Crosby

Similar Messages

HT201302 How do I delete a photo from my camera roll and not delete it from a folder

When I delete photos from my camera roll, it also deletes them from the folder I've saved them in. How do I delete from the camera roll and not lose them from the folder?

"When I delete photos from my camera roll, it also deletes them from the folder I've saved them in. "
Correct. There is only one photo and it is in the camera roll. The folders you create are just a way to organize the pics. it does not create a duplicate pic.
Just as a song is in your library and a playlist, a pic is in the camera roll and the folder.
If you delete a song from the library, then it is gone. The same is true of pics.

How to allow some fixed extension go in from outside to inside but not allow go from inside to outside

how to allow some fixed extension go in from outside to inside but not allow go from inside to outside
for example, allow JPEG, MOV, AVI data flow from outside to inside
but not allow JPEG, MOV, AVI files access or upload or get by outside, in another words not from inside to outside
how to configure?

Hi,
The ZBF link sent earlier show how we can inspect URI in http request
parameter-map type regex uri_regex_cm
pattern “.*cmd.exe”
class-map type inspect http uri_check_cm
match request uri regex uri_regex_cm
ZBf is the feature on Cisco routers and ASA though concepts are little same but works differently. However it is important that you can be more granular with the protocol (layer 7) inspection only. Like on ASA if you will try to restrict .exe file from a p2p application that won't be possible, But on router you have some application for p2p in NBAR and you can use it file filtering. Please check configuartion example for both devices.
Thanks

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Audio from Sony EX1r Camera will not round trip from Audition

With Premier CC15 the audio from my Sony EX1R Video Camera comes back from Audition after the edit just as a loud buzz. It works fine in Premier 6 and also CC. My Panasonic camera Audio, as well as all others work fine.
Can someone help?

Giving up? Four product releases in nine months. That's a pretty aggressive development schedule for a new product.
Motion is a separate development track and always has been. Roundtripping to Motion was not available in its first releases. Apple has taken a new approach with publishing and rigging, which has great benefits. It basically meant that the entire effects, transitions, generators, and titling architecture didn't have to be rebuilt in FCP and that the two applications can work together. There are a lot of things this allows. For instance, if you want to add effects from Motion to clips in FCP, roundtripping is quite unnecessary; simply publish the effect with the parameters you need and apply the effect inside FCP.
Roundtripping is really useful for a lot of things and will probably be implemented. In the interim third party soluations using XML hooks are available.

Deleting photostream photos from Mac within iPhoto does not remove photos from all devices.

I have photostream activated on my iPhone 5s (iOS 8.1) to backup all my photos to iCloud. This works great! When I open iPhoto, the stream is automatically updated and my photos appear. If I also delete a photo from my iPhone, the stream is once again updated and the photo disappears.
However, if I delete the photo via iPhoto via the Photostream tab on my Mac, the photostream is not updated and the photo remains on my iPhone, as well as online via icloud.com. i.e it works one way, but not the other.
Am I doing something wrong?

However, if I delete the photo via iPhoto via the Photostream tab on my Mac, the photostream is not updated and the photo remains on my iPhone, as well as online via icloud.com. i.e it works one way, but not the other.
When you delete a photo from "My Photo Stream" in the iCloud section in iPhoto on your Mac, it will be removed from "My Photo Stream" in iCloud, and should be removed from the Photo Stream on all devices. However, the photos already downloaded to the devices from My Photo Stream will not be deleted.If automatic download is enabled on your iPhone, the photos will stay on your iPhone,

Switched from iphone to galaxy - now not receiving texts from iphone users

Switched from iphone to galaxy for multiple reasons. Still keeping my iPad and wanted to use my iphone for music. Now I am not receiving texts, apparently imessages, from iphone users - there is no notification either way that a message was not received. So iphone users think I have received a text when I haven't. This makes me angry with Apple as there have been medical issues in our family and I have not been receiving important communication. I also have clients I have not received texts from. My understanding is I will have to delete my iphone from my apple account completely, but then will not be able to use it at all for itunes or anything else.

If you still have the iPhone, go to Settings and turn off iMessage. If you don't have the phone or if that doesn't solve the problem, contact Apple Support and request that they deactivate iMessage. https://www.apple.com/support/appleid/contact/

My printer prints from word but nowhere else. not even directly from printer glass.

I have had this printer, Officejet Pro 8600 (Model # SNPRC-1101-01)since December 2013 with no problems until recently. Nothing has changed. No new computers, printers, change in internet servers, etc. I can print from word documents but the printer sounds like its working overtime looking for what to print. No strange noices just a lot of carriage movement. It will not print directly from the glass and the automatic feed on top of machine does not work. The print cartridges are in correctly along with plenty of the correct size of HP paper (8.5x11). I now get various messages, Error; Paper detected does not match paper size or type selected. Make sure paper size is correct to continue the job; etc. Sometimes when it does print wirelessly, the margins are off center, leaving about 2-4" blank space from papers left edge. I have tried all the obvious fixes. Shutting it down. Unplugging and letting it rest for 10 plus minutes before reconnecting to power and restarting. Turning Router off for 10 minutes before turning it back on. I even checked the settings and selected " restore to factory default settings."
Please explain in great detail what I need to do to fix my printer as I am not that tech savy.
Thank you in advance for any help and advice.

Melisa-
I wonder if you have a print job stuck in the print queue? Double click the Home button and a row of recent applications should appear across the bottom of the screen. Scroll across and look for the Print Queue.
Fred

IDoc - JDBC, acknowledgment not possible

Hi Guys.
I've this scenario, It makes a branch, to a BPM and to a JDBC. The problem is, i got an error at the JDBC acknowledgment response (Acknowledgment not possible)
                        IDOC
Branch
               BPM                 JDBC
          No errors              Acknowledgment
        in acknowledgment        not possible
This scenario was made by a external consultant, and i don't know where is the JDBC acknowledgment defined.
Does anyone know, where can i modified this and disable the acknowledgment response for the JDBC?
Thanks in advance.

HI,
Go to BPM and check the Send Step .. Is it has mode as acknowledgement etc ?
Also check is Exception Branch has been defined ?
to suppress the ack for Idoc -[page no 10 - entry in table IDXNOALE in XI system
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Regards,
Moorthy

Iphoto not making events from recent import

I just recently imported about 100+ photos from my camera. All of them appear in last import and I believe the last 12 months. However it didn't make an event for the import which it has in the past. Plus the images don't appear in "photos" either.

If only 12 photos, try manually deleting the photos from the iPhone's Camera Roll.
Then take a couple of photos and try again.
If this doesn't work and a Restore from your iPhone's backup doesn't work, the next step to take is restoring as a new iPhone or not from the backup.

How can I uninstall mozilla from my computer I can not do it from my uninstall program

When I signed on to my computer Mozilla Fire Fox will not come up therefore not able to get into my favorites or anything. I do not know what happened and I can not uninstall from my computer and need to get it off so hopefully I can reinstall and get it to work.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up

Since recent upgrade to win 8 from 7, HP printer will not accurately print from Photosmart 7.0.1. ?

Is there an update to correct this?

Seems like your question would be better in an HP forum than Adobe. Photosmart is of course not an Adobe product. Have you checked the HP site for driver updates for your particular set of hardware?
You haven't been very specific; perhaps if you provide more info about specifically what you have and what you're seeing go wrong someone will be able to help you better.
I don't have a suggestion for you beyond that, but this is for others considering Windows 8: It's never good to upgrade to a brand new OS in the first weeks after its release. An OS is more than just software from the manufacturer - it involves support from hardware vendors. No matter how many preview versions the OS manufacturer has released, device driver perfection (printer, display, storage devices, motherboard) ALWAYS lags behind the OS release.
Right now apparently there are a number of known problems with Windows 8:
With display drivers (people not getting good GPU support with ATI cards in Normal and Advanced modes, for example).
With printer drivers.
With storage drivers (I've heard of troubles with RAID controllers, for example).
In the professional realm there's an old adage, born from long experience: Never upgrade to a new Windows version until Service Pack 1.
With Windows 8 there is the additional consideration (for those who haven't yet taken the plunge): Carefully consider whether Windows 8 adds any return on investment (ROI) that you actually need.
Microsoft has taken off in a new non-pro direction with Windows 8 and has actually DEGRADED the desktop experience (presumably to try to herd us all over into the Metro/Modern realm). It may be that the best idea would be to continue to use Windows 7 and wait until Windows 9 (or whatever they call the next release) to re-evaluate upgrade options.
-Noel

Meeting requests not making it from Mail to iCal

I haven't been able to have meeting requests automatically transfer over to iCal.
I have my Mail settings set to automatically send meeting invites to iCal, and most invitations come from people that are present in my address book.
I've been on hold with Apple Care for over an hour, and haven't had any luck other than being asked to check the settings above.
Any help you can provide would be much appreciated.
Thanks

I haven't been able to have meeting requests automatically transfer over to iCal.
I have my Mail settings set to automatically send meeting invites to iCal, and most invitations come from people that are present in my address book.
I've been on hold with Apple Care for over an hour, and haven't had any luck other than being asked to check the settings above.
Any help you can provide would be much appreciated.
Thanks

Purchase Requisition transfer from ECC to SRM via XI

Experts,
Please let me know if you have any information on the following issue:
Environment : SRM 7.0, ECC ep4, Extended Classic scenario
The purchase requisitions have been created in ECC and released. I believe in SRM 7.0 the PR's get automatically transferred to SRM Sourcing cockpit via XI from ECC.
One PR was pushed manually from SMQ1(Outbound queue ) in ECC and this failed due to a login issue in XI.
The XI was using the interface PurchaseRequestERPSourcingRequest.
My question is
1. When the PR is released in ECC, where to check if the PR is pushed to XI. Do we need to schedule a job? When I checked SMQ1 (outbound queue, the queues are empty)
2. Do we need to define the partner profile in ECC for XI in We20. If so, then what message types to use for the IDocs going from ECC to XI.
2. Do we need to configure the interface PurchaseRequestERPSourcingRequest in XI to map the incoming PR from ECC.
3. In transaction SXMB_moni in XI I am not able to pull the XML messages. What options options do I need to
set to pull the messages that errored out.
Thanks,
Scott.

Hi All,
Hope this helps you for XI configuration
Importing Business Scenarios for Sourcing
In this section, you transfer the business scenario Strategic Sourcing from the SAP Integration Repository, generate it, and activate it.
Prerequisites
You have:
Defined the business systems for SAP Supplier Relationship Management (SAP SRM) and SAP ERP in the SAP System Landscape Directory. For more information about SAP NetWeaver Process Integration (SAP NetWeaver PI), see the SAP Marketplace
Imported the SAP NetWeaver PI content for SAP SRM into the SAP Integration Repository.
Procedure
Log on to the SAP Netweaver PI system.
Choose Integration Builder: Configuration.
In the left pane, select the Objects tab.
Choose Service Without Partner Business System .
Right-click to display the context menu and choose Business Systems Assign Business System . This opens the wizard.
Choose Continue. The wizard guides you through the required steps.
Create the business system for both SAP SRM and ERP (you can bypass this step if the business system is already setup).
Select a business system.
You can create communication channels either manually or automatically. You can create them automatically here. In this case, the systems are applied from the SAP System Landscape Directory (SLD). Channels must be complete in terms of URLs and authentication information.
Choose Finish, and then choose Close.
11. On the main screen, choose Tools Transfer Integration Scenario from Integration Repository . This opens a wizard.
Choose Name using input help SE_Sourcing_Enhancements
Choose Continue. The scenario name is SE_Sourcing_Enhancements.
Choose Finish and then choose Close. The Business Scenario Configurator opens automatically.
Choose Component View.
The Select Component View window opens.
Choose Apply.
Choose Assign Services. The Assign Services to Application Component window opens.
Press F4 to retrieve the available services.
Choose Assign.
Select the related service and choose OK.
Assign a business service to all roles.
Choose Configure Connections.
Select the connections from the Service Assignment tab.
Press F4 in the Communication Channel field.
Select a communication channel. This channel must be of type XI.
Note
If the systems are applied from the SAP Landscape Directory, the Integration Builder automatically creates the communication channels.
If the systems are not applied from the SAP Landscape Directory, you create communication channels manually. To do this choose an existing service and then Communication Channel using context menu New. You must assign a communication channel for each connection.
End of the note.
Choose OK and then choose Apply.
Choose Generate to open the Create Configuration Objects window.
Choose Simulation, then Generate, then mark all in the list Scope of Generation.
Choose Start to generate a log. Check the log for errors and save it if required.
In the Close Integration Scenario screen, choose Apply.
In the left pane, select the Scenarios tab; your scenario has been added.
In the left pane, select the Change List tab.
Expand the Standard Change List.
Right click on the scenario name SE_Sourcing_Enhancements and choose Activate.
Regards
Sam

To use SRM Catalog from ECC

Hi All,
there is a way to use the SRM catalog from ECC system?
Can I buy items from ECC system selecting them from SRM catalog?
Thanks in advance.
Antonio.

Hi Antonio,
If I have understood your question correctly - you are looking out to buy products within ECC system using SRM system
If this is the case, you can do 2 things-
1. You can replicate all ECC products to SRM and buy them from standard SRM shopping cart functionality; wherein a search functionality would be avaialable to find out a perticular replicated backend product. Regarding maintenance of prices for these products- you can use 'interlinkages' withing SRM. You can maintain separate price of different vendors for a same product using interlinkages.
2. I am not sure about CCM but if SAP MDM is in your scope along with SRM, then you can replicate all ECC products as standard catalogs items to MDM from ECC. This would require XI as a middileware. Once replicated you can use these catalogs from buying purpose withing SRM
Hope this helps you.
Best Regards,
Amit

PI 7.4 - interface from ECC(idoc) JDBC, idoc not making it from sm58 '

Similar Messages

Maybe you are looking for