PI and PI calc for GPA/CGPA
Hi All,
I wanted to calculate GPA and CGPA. As far as my knowledge goes its a standard functionality delivered by SLcM. We have to just make sure that we have done the right configuration to assign the performance indices to particular Calculation Point.
In my case i have created 4 performance indeces and assigned PI calc as given below:
Attempted Credits == CPA1 (Total attempted credit)
Earned Credits== CPE1 (Total earned credits)
Grade Point Average== GPA1(Average Grade) Filter=== Appraisal completed
Cummulative Grade Point Average== GPA1(Average Grade) Filter=== Average Grade
I just wanted to know which PI calculation shall be assigned to GPA and CGPA? Whether assigned filters are correct or not?
Is it necessary to assign parameters and filters to Performance Index?
Regards
Vinod Kumar
Vinod, the PI to use for Sessional GPA and Cumulative GPA is the same: GPA. For the first one (Sessional GPA) you should be filtering by academic year/session and by the "Appraisal complete" if you want (yo are already using that filter).
The Cumulative GPA should use the same PI (GPA), and filter just by "Appraisal complete" (in your scenario).
You should check that the GPA PI standard calculation (the one provided by SAP) fits into your client's GPA calculation requirements. If it doesn't, you should copy that PI and make the necessary changes.
Diego
Similar Messages
-
OBIEE 11g write back to Essbase and run calc script feature
Hi,
I have a requirement to write back into Essbase Cube and run calc script from OBIEE dashboard.
From what i have search on google, we must deploy additional Java Script into weblogic, but that is before OBIEE 11.1.1.6.
I have 2 question:
- Does OBIEE 11.1.1.6 already supported native write-back to Essbase and running calcscript?
- Anyone has example of the custom java-script for write back and running calcscript?
And another, if there are requirement like this, is it better to install Essbase Add-in on Microsoft Excel and do the what-if analysis there, then just display the report on OBIEE dashboard? (based on user-friendliness and the complexity on maintenance)
Thanks in advance.Hi,
Even I am trying to achieve the same thing as you have mentioned but think that it is not possible to achieve easily in obiee 11.1.1.6, though we do have a work around to perform a writeback in Essbase cube using JAPI as mentioned below.
Also we can call Hyperion reports from OBIEE using Action Links and also pass parameters to the same but dont know if it runs calculation script.
Below link could be useful for you for write back workaround.
http://oraclebizint.wordpress.com/2009/05/25/oracle-bi-ee-10-1-3-4-1-writebacks-to-essbase-using-japi-and-custom-html-part-1/
Let me know in case you have found out anything else related to same.
Thanks, -
Empty table with multiples rows and 2 columns for processing data
Hi,
I am very new to adobe forms. I have the requirement that the user will enter some data in the table rows and I should process them to update in a z-table as well as use that data for MB1A tcode. I am not sure what to use here. Which is the best. I dont know anything about webdynpro. Can it be done directly in SFP transaction without using web-dynpro?
Also if I need more rows I should give them the option to add rows. How does the submit button work here when the user enters the data in all the 10 rows.
I heard about web services and I know a little about it, can it be achieved though that? Please help me. I need to finish 4 forms like this and each form should take me to the next form level.
Kaps.Hello!
You don´t have to tell me, I am the ABAP developer as well. I know that there is very little like ..."career" value in learning scripting in some obscure languages like Java script or Form Calc for Adobe forms. But trust me, you won´t have to learn much. You will have to learn how to manipulate the presence of form fields (or variable values, but that is the same like setting the presence to hidden, you only pass a constant or any other value).
In the mentioned guide, in the last chapter you can just copy and next paste the ready to use scripting bacis. I think you should find the add/ remove row scripts there as well.
The right scenario is not always easy to pick, consider this:
- how many forms at the same time will the user have to fill? (if one --> offline, if more --> portal/ WD)
- do you want the user to work with the NW portal? do you have licenses for the new users? (WD)
- how often will the people fill their forms? how important the processes are? how many values will come from the backend tables (like how many search helps you would use if you can)
etc. etc.
Hope that clarifies things a little for you
regards Otto -
Killing User sessions and user calcs
Hi all,
We have a situation where users run their business rules during evening and at times in night.
We also have a maxl script which does aggregation and other calcs daily in night and it does not run as other calcs are launched by users.
Is it possible to kill the user session and calcs launched by users before running maxl calculation for consolidations?
I know I can do in in EAS, but want to try to do it in MAxL for automation.
Thanks in advanceYou would be better off locking people out. After you kick off the automated calc, killing sessions doesn't stop them from initiating calcs while your automated calc is running. In answer to your question, yes, you can do that in maxl.
alter system kill request all;
You have other options if you want to be more selective on what you kill.
kill request <session-id>
kill request by user
kill request on application
kill request on database
Check out the technical documentation for more info - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/launch.html.
Kyle Goodfriend
http://www.in2hyperion.com
Please make sure to assign helpful/answered to responses if applicable - it rewards those who help and benefits the user community. -
Difference between ms excel and oo calc
is there a big difference between ms excel and oo calc?
have to learn excel, but have only linux.
are the macros and and the handling similar?
what are the differences?
thanks in advance.From OpenOffice Help:
With a few exceptions, Microsoft Office and OpenOffice.org cannot run the same macro code. Microsoft Office uses VBA (Visual Basic for Applications) code, and OpenOffice.org uses Basic code based on the OpenOffice.org API (Application Program Interface) environment. Although the programming language is the same, the objects and methods are different.
The most recent versions of OpenOffice.org can run some Excel Visual Basic scripts if you enable this feature at Tools - Options - Load/Save - VBA Properties.
If you use macros in one of the applications and want to use the same functionality in the other application, you must edit the macros. OpenOffice.org can load the macros that are contained within Microsoft Office files and you can then view and edit the macro code in the OpenOffice.org Basic IDE editor.
The workflow is pretty much the same; a spreadsheet is a spreadsheet. Some keyboard shortcuts are different and annoy me. -
Reg:Opening and Closing Stock For Plant
Hi All,
i want to calculate the opening stock and closing stock for plant wise for the given Posting Period Date.
Am having the opening balance and closing balance for all months but i need it as month wise.
considering this example,
the date is from 15.01.2010 to 15.03.2010 and for one plant
considering this example,
am having the opening stock from as 15.01.2010 to 15.03.2010 as 10,000 and the closing stock as 15,000.
but i need in month wise like below,
from 15.01.2010 to 31.01.2010 what is the opening stock and closing stock?
from 01.02.2010 to 28.02.2010 what is the opening stock and closing stock?
from 01.03.2010 to 15.03.2010 what is the opening stock and closing stock?
this is purely based on plant wise and not material wise?
could anybody say clearly how can i acheive this scenario?
i have referred MB5b,mc.9 transaction programs but still confused how to go with plant wise for a particular period?
Thanks & Regards,
Suresh
Edited by: suresh suresh on Mar 24, 2010 10:15 AMHi,
Refer to link below:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/3766e7449a11d188fe0000e8322f96/frameset.htm
Regards,
Venkat. -
Material opening and closing stock for a given day- Tables or FM
Dear Friends
i have to make a report , related to Material opening and closing stock for a given day , i check the T-Code- MB5B ,
it is not giving correct date . is any functional module is available ? . i checked some table like mbew , mard . it is also not giving correct requirement . Please helpHi
Goto transaction MC.9, Give your Material and,Plant and the date which you need to know the closing stock. Do make sure that in the high and low values you are giving the same date there. I guess no such FM are available for this. You can refer the [Link|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=15856] for some help.
Regards
Vinodh
Edited by: Vinodh_AN on Dec 15, 2010 9:19 AM
Edited by: Vinodh_AN on Dec 15, 2010 9:25 AM -
Report to find open items and close items for given vendor
Hi All,
What are the steps needed to write a REPORT to find out
open and close items for a given vendor.
Which are the fields i'll have to take and what are the comparisons i'll have to make.
I know,
BSIK is for open Vendor &
BSAK for closed Vendors..
what are the conditions i'll have to check.
Thanks in Advance..
Pradeep AlexHi Pradeep,
This report I developed is definitely useful to you.
*& Report ZFI_PROV_IT_VENDOR
REPORT ZFI_VENDOR.
TYPE-POOLS: slis.
tables: BKPF,
BSEG,
bsik,
bsak,
bsid,
bsad,
lfa1,
t005u, "Region Description
J_1IMOVEND.
TYPES: BEGIN OF ty_bkpf,
bukrs type bkpf-bukrs,
belnr TYPE bkpf-belnr,
gjahr type bkpf-gjahr,
blart TYPE bkpf-blart,
budat TYPE bkpf-budat,
END OF ty_bkpf.
types: begin of ty_J_1IMOVEND,
lifnr type lfa1-lifnr,
J_1IPANNO type J_1IMOVEND-J_1IPANNO,
J_1ICSTNO type J_1IMOVEND-J_1ICSTNO,
J_1ISERN type J_1IMOVEND-J_1ISERN,
end of ty_J_1IMOVEND.
TYPES: BEGIN OF ty_bseg,
belnr TYPE bseg-belnr,
gjahr type bseg-gjahr,
bschl TYPE bseg-bschl,
umskz type bseg-umskz,
shkzg type bseg-shkzg,
wrbtr TYPE bseg-wrbtr,
hkont type bseg-hkont,
lifnr TYPE bseg-lifnr,
END OF ty_bseg.
types: begin of ty_t005u,
bland type t005u-bland,
bezei type t005u-bezei,
end of ty_t005u.
types: begin of ty_lfa1,
lifnr type lfa1-lifnr,
name1 type lfa1-name1, "35
ort01 type lfa1-ort01, "35
ort02 type lfa1-ort02, "35
pfach type lfa1-pfach, "10
pstlz type lfa1-pstlz, "10
regio type lfa1-regio, "3
stras type lfa1-stras, "35
ktokk type lfa1-ktokk,
telf1 type lfa1-telf1, "16
telf2 type lfa1-telf2, "16
end of ty_lfa1.
types: begin of ty_bsik,
bukrs type bsik-bukrs,
lifnr type bsik-lifnr,
augdt type bsik-augdt,
augbl type bsik-augbl,
belnr type bsik-belnr,
budat type bsik-budat,
blart type bsik-blart,
shkzg type bsik-shkzg,
wrbtr type bsik-wrbtr,
end of ty_bsik.
types: begin of ty_bsid,
bukrs type bsid-bukrs,
lifnr type bsid-kunnr,
augdt type bsid-augdt,
augbl type bsid-augbl,
belnr type bsid-belnr,
budat type bsid-budat,
blart type bsid-blart,
shkzg type bsid-shkzg,
wrbtr type bsid-wrbtr,
end of ty_bsid.
types: begin of ty_out2,
lifnr type bsik-lifnr,
wrbtr type bsik-wrbtr,
end of ty_out2.
types: begin of ty_out,
lifnr type lfa1-lifnr,
name1 type lfa1-name1,
addr(162) type c,
J_1IPANNO type J_1IMOVEND-J_1IPANNO,
J_1ICSTNO type J_1IMOVEND-J_1ICSTNO,
J_1ISERN type J_1IMOVEND-J_1ISERN,
opbal type bseg-wrbtr,
purch type bseg-wrbtr,
PAYM type bseg-wrbtr,
grdeb type bseg-wrbtr,
othdeb type bseg-wrbtr,
othcre type bseg-wrbtr,
tds type bseg-wrbtr,
bal type bseg-wrbtr,
blart type bkpf-blart,
bschl type bseg-bschl,
end of ty_out.
types: begin of ty_bsegtemp,
lifnr TYPE bseg-lifnr,
end of ty_bsegtemp.
types: begin of ty_bsegnew,
wrbtr TYPE bseg-wrbtr,
lifnr TYPE bseg-lifnr,
end of ty_bsegnew.
data: it_bsik type table of ty_bsik with header line,
it_bsid type table of ty_bsid with header line,
it_bsak type table of ty_bsik with header line,
it_out2 type table of ty_out2 with header line,
it_out3 type table of ty_out2 with header line.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv,
it_listheader TYPE slis_t_listheader,
it_alvevent TYPE slis_t_event,
gt_events TYPE slis_t_event WITH HEADER LINE.
DATA: I_SORT TYPE SLIS_T_SORTINFO_ALV.
DATA : wa_fieldcat TYPE slis_fieldcat_alv,
wa_listheader TYPE slis_listheader,
wa_alvevent TYPE slis_alv_event.
DATA: WA_SORT TYPE SLIS_SORTINFO_ALV.
DATA: ls_line TYPE slis_listheader.
DATA : g_repid LIKE sy-repid, " Program ID
g_layout TYPE slis_layout_alv. " Layout Workarea
DEFINE m_fieldcat.
wa_fieldcat-col_pos = &1. " Fieldcat column postion
wa_fieldcat-fieldname = &2. " Field name
wa_fieldcat-DO_SUM = &3.
wa_fieldcat-seltext_m = &4. " Column Text
wa_fieldcat-outputlen = &5.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
END-OF-DEFINITION.
DATA: wa_lfa1 TYPE ty_lfa1,
wa_bkpf TYPE ty_bkpf,
wa_bkpf1 type ty_bkpf,
wa_bsegtemp type ty_bsegtemp,
wa_bsegnew type ty_bsegnew,
wa_bsegnew1 type ty_bsegnew,
wa_J_1IMOVEND type ty_J_1IMOVEND,
wa_t005u type ty_t005u,
wa_bseg TYPE ty_bseg,
wa_out TYPE ty_out.
DATA: gt_out TYPE STANDARD TABLE OF ty_out,
gt_out1 TYPE STANDARD TABLE OF ty_out,
gt_lfa1 TYPE STANDARD TABLE OF ty_lfa1,
gt_bsegtemp type standard table of ty_bsegtemp with header line,
gt_bsegnew type standard table of ty_bsegnew with header line,
gt_bsegnew1 type standard table of ty_bsegnew with header line,
gt_J_1IMOVEND type standard table of ty_J_1IMOVEND,
gt_bkpf1 TYPE STANDARD TABLE OF ty_bkpf WITH HEADER LINE,
gt_t005u type standard table of ty_t005u,
gt_bseg TYPE STANDARD TABLE OF ty_bseg WITH HEADER LINE,
gt_bkpf TYPE STANDARD TABLE OF ty_bkpf WITH HEADER LINE.
selection-screen begin of block b1 with frame title text-001.
select-options: s_budat for bkpf-budat obligatory,
s_ktokk for lfa1-ktokk obligatory.
s_wrbtr for bseg-wrbtr.
parameters: p_bukrs type bkpf-bukrs obligatory default '1000'.
p_gjahr type bkpf-gjahr obligatory.
p_lifnr type bseg-lifnr obligatory default '300040',
p_ktokk type lfa1-ktokk obligatory default 'Z200'.
selection-screen end of block b1.
START-OF-SELECTION.
PERFORM sub_fetch_data.
PERFORM sub_process_data.
END-OF-SELECTION.
PERFORM sub_build_fieldcat.
PERFORM sub_build_layout.
PERFORM eventtab_build USING gt_events[].
PERFORM comment_build USING it_listheader[].
PERFORM sub_disp_data.
*& Form SUB_BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
FORM sub_build_fieldcat .
sort gt_out by name1.
*DEFINE M_SORT.
ADD 1 TO WA_SORT-SPOS.
WA_SORT-FIELDNAME = &1.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = &2.
APPEND WA_SORT TO I_SORT.
END-OF-DEFINITION.
*m_sort 'NAME1' 'X'.
*M_SORT 'ADDR' 'X'.
m_fieldcat 1 'LIFNR' ' ' text-026 10.
m_fieldcat 2 'NAME1' ' ' text-006 35.
m_fieldcat 3 'ADDR' ' ' text-007 162.
m_fieldcat 4 'J_1IPANNO' '' text-008 40.
m_fieldcat 5 'J_1ICSTNO' '' text-009 40.
m_fieldcat 6 'J_1ISERN' '' text-010 40.
m_fieldcat 7 'OPBAL' '' text-011 18.
m_fieldcat 8 'PURCH' '' text-012 18.
m_fieldcat 9 'PAYM' '' text-013 18.
m_fieldcat 10 'GRDEB' '' text-014 18.
m_fieldcat 11 'OTHDEB' '' text-020 18.
m_fieldcat 12 'OTHCRE' '' text-021 18.
m_fieldcat 13 'BAL' '' text-023 18.
m_fieldcat 14 'TDS' '' text-022 18.
ENDFORM. " SUB_BUILD_FIELDCAT
*& Form SUB_BUILD_LAYOUT
text
--> p1 text
<-- p2 text
FORM sub_build_layout .
g_layout-zebra = 'X'.
g_layout-colwidth_optimize = 'X'.
ENDFORM. " SUB_BUILD_LAYOUT
*& Form EVENTTAB_BUILD
text
-->P_GT_EVENTS[] text
FORM eventtab_build USING gt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = gt_events.
READ TABLE gt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE 'TOP_OF_PAGE' TO ls_event-form.
APPEND ls_event TO gt_events.
ENDIF.
ENDFORM. " EVENTTAB_BUILD
*& Form COMMENT_BUILD
text
-->P_IT_LISTHEADER[] text
FORM comment_build USING p_it_listheader TYPE
slis_t_listheader.
data: v_text(30) type c,
v_datelow(10) type c,
v_datehigh(10) type c,
v_month(2) type c,
v_day(2) type c,
v_year(4) type c.
v_day = s_budat-low+6(2).
v_month = s_budat-low+4(2).
v_year = s_budat-low+0(4).
concatenate v_day '.' v_month '.' v_year into v_datelow.
clear: v_day,v_month,v_year.
v_day = s_budat-high+6(2).
v_month = s_budat-high+4(2).
v_year = s_budat-high+0(4).
concatenate v_day '.' v_month '.' v_year into v_datehigh.
clear: v_day,v_month,v_year.
concatenate 'From' v_datelow 'To' v_datehigh into v_text
separated by space.
clear: v_datelow, v_datehigh.
ls_line-typ = 'H'.
ls_line-info = text-116.
APPEND ls_line TO p_it_listheader.
ls_line-typ = 'S'.
ls_line-key = text-090.
ls_line-info = v_text.
APPEND ls_line TO p_it_listheader.
ENDFORM. " COMMENT_BUILD
*& Form TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader.
ENDFORM. " TOP_OF_PAGE
*& Form SUB_DISP_DATA
text
--> p1 text
<-- p2 text
FORM sub_disp_data .
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_repid
it_fieldcat = it_fieldcat[]
is_layout = g_layout
i_save = 'U'
it_events = gt_events[]
IT_SORT = I_SORT[]
TABLES
t_outtab = gt_out1[].
ENDFORM. " SUB_DISP_DATA
*& Form sub_fetch_data
text
--> p1 text
<-- p2 text
form sub_fetch_data .
select bukrs
belnr
gjahr
blart
budat
from bkpf
into table gt_bkpf
where budat in s_budat
and bukrs = p_bukrs
and gjahr = p_gjahr
and blart in ('KR','KG','KZ','RE','DK','Z1','AB','SA','KA','DZ').
select belnr
gjahr
bschl
umskz
shkzg
wrbtr
hkont
lifnr
from bseg
into table gt_bseg
for all entries in gt_bkpf
where belnr = gt_bkpf-belnr
and gjahr = gt_bkpf-gjahr
and gjahr = p_gjahr
and bschl in (21,25,29,31,50,39,38,19,35).
and kunnr in gt_
and lifnr = '0000300019'.
select belnr
gjahr
bschl
umskz
shkzg
wrbtr
hkont
kunnr
from bseg
appending table gt_bseg
for all entries in gt_bkpf
where belnr = gt_bkpf-belnr
and gjahr = gt_bkpf-gjahr
and gjahr = p_gjahr
and bschl in (21,25,29,31,50,39,38,19).
break manukapur.
sort gt_bseg by lifnr bschl.
delete adjacent duplicates from gt_bseg comparing all fields.
loop at gt_bseg into wa_bseg.
if wa_bseg-lifnr is not initial.
move: wa_bseg-lifnr to wa_bsegtemp-lifnr.
append wa_bsegtemp to gt_bsegtemp.
endif.
endloop.
delete adjacent duplicates from gt_bsegtemp comparing lifnr.
select lifnr
name1
ort01
ort02
pfach
pstlz
regio
stras
ktokk
telf1
telf2
from lfa1
into table gt_lfa1
for all entries in gt_bseg
where lifnr = gt_bseg-lifnr
and ktokk in s_ktokk.
and lifnr = '0000300030'.
select bland
bezei
from t005u
into table gt_t005u
for all entries in gt_lfa1
where bland = gt_lfa1-regio
and land1 = 'IN'
and spras = sy-langu.
select lifnr
J_1IPANNO
J_1ICSTNO
J_1ISERN
from J_1IMOVEND
into table gt_J_1IMOVEND
for all entries in gt_bseg
where lifnr = gt_bseg-lifnr.
*select bukrs
belnr
blart
budat
from bkpf
into table gt_bkpf1
where budat < s_budat-low.
and zfdbt < s_budat-low.
select
wrbtr
lifnr
from bseg
into table gt_bsegnew
for all entries in gt_bkpf
where belnr = gt_bkpf-belnr
and xopvw = 'X' .
and zfbdt < s_budat-low.
select bukrs
lifnr
augdt
augbl
belnr
budat
blart
shkzg
wrbtr
from bsik
into table it_bsik
for all entries in gt_bseg
where lifnr = gt_bseg-lifnr
and lifnr = '0000300000'
and bukrs = '1000'
and budat <= s_budat-low.
select bukrs
lifnr
augdt
augbl
belnr
budat
blart
shkzg
wrbtr
from bsak
appending table it_bsik
for all entries in gt_bseg
where bukrs = '1000'
and lifnr = gt_bseg-lifnr
and lifnr = '0000300000'
and budat <= s_budat-low
and augdt > s_budat-low.
select bukrs
kunnr
augdt
augbl
belnr
budat
blart
shkzg
wrbtr
from bsid
into table it_bsid
for all entries in gt_bseg
where bukrs = '1000'
and kunnr = gt_bseg-lifnr
and kunnr = '0000300000'
and budat <= s_budat-low.
select bukrs
kunnr
augdt
augbl
belnr
budat
blart
shkzg
wrbtr
from bsad
appending table it_bsid
for all entries in gt_bseg
where bukrs = '1000'
and kunnr = gt_bseg-lifnr
and kunnr = '0000300000'
and budat <= s_budat-low
and augdt > s_budat-low.
if it_bsid[] is not initial.
append lines of it_bsid to it_bsik.
endif.
*delete gt_bsegnew where lifnr <> '0000300000'.
*break manukapur.
*sort gt_bsegnew by lifnr.
*loop at gt_bsegnew into wa_bsegnew.
*collect wa_bsegnew into gt_bsegnew1.
*endloop.
loop at it_bsik .
it_out2-lifnr = it_bsik-lifnr.
*it_out1-budat = it_bsik-budat.
*it_out1-blart = it_bsik-blart.
if it_bsik-SHKZG = 'H'.
it_out2-wrbtr = it_bsik-wrbtr.
else .
it_out2-wrbtr = it_bsik-wrbtr * -1.
endif.
append it_out2.
clear: it_out2, it_bsik.
*endif.
*clear it1.
endloop.
sort it_out2 by lifnr.
loop at it_out2.
it_out3-lifnr = it_out2-lifnr.
it_out3-wrbtr = it_out2-wrbtr.
collect it_out3.
clear: it_out3, it_out2.
endloop.
endform.
*& Form sub_process_data
text
--> p1 text
<-- p2 text
form sub_process_data .
*sort gt_bsegtemp by lifnr .
sort gt_bseg by lifnr bschl.
sort gt_bsegnew by lifnr.
sort it_out3 by lifnr.
*loop at gt_bsegnew into wa_bsegnew.
*at end of lifnr.
*sum.
*endat.
*endloop.
sort gt_bkpf by blart.
loop at gt_bseg into wa_bseg.
if wa_bseg-lifnr is not initial.
read table gt_lfa1 into wa_lfa1 with key lifnr = wa_bseg-lifnr.
move: wa_lfa1-name1 to wa_out-name1,
wa_lfa1-lifnr to wa_out-lifnr.
read table gt_t005u into wa_t005u with key bland = wa_lfa1-regio.
concatenate wa_lfa1-stras ',' wa_lfa1-ort01 ','
wa_lfa1-ort02 ',' wa_t005u-bezei ','
wa_lfa1-pfach ','
wa_lfa1-pstlz ',' 'Ph:'
wa_lfa1-telf1 ','
wa_lfa1-telf2
into wa_out-addr separated by space.
read table gt_J_1IMOVEND into wa_J_1IMOVEND with key lifnr = wa_bseg-lifnr.
move: wa_J_1IMOVEND-J_1IPANNO to wa_out-J_1IPANNO,
wa_J_1IMOVEND-J_1ICSTNO to wa_out-J_1ICSTNO,
wa_J_1IMOVEND-J_1ISERN to wa_out-J_1ISERN.
read table gt_bkpf into wa_bkpf with key belnr = wa_bseg-belnr.
if wa_bkpf-blart = 'RE' and wa_bseg-bschl = 31 or
wa_bkpf-blart = 'KR' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-purch = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-purch = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KR' and wa_bseg-bschl = 50.
*wa_out-tds = wa_out-tds + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-tds = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-tds = wa_bseg-wrbtr * -1.
endif.
endif.
*wa_out-tds = wa_bseg-wrbtr.
endif.
if wa_bkpf-blart = 'KG' and wa_bseg-bschl = 21.
*wa_out-grdeb = wa_out-grdeb + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'RE' and wa_bseg-bschl = 21.
*wa_out-grdeb = wa_out-grdeb + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 25
*or wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 29
**and wa_bseg-umskz = 'A'
or wa_bkpf-blart = 'SA' and wa_bseg-bschl = 25.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-paym = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-paym = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'DK' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'SA' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 38.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'DZ' and wa_bseg-bschl = 19
and wa_bseg-umskz = 'A'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KA' and wa_bseg-bschl = 39
and wa_bseg-umskz = 'G' or
wa_bseg-umskz = 'H' or
wa_bseg-umskz = 'J' or
wa_bseg-umskz = 'L' OR
wa_bseg-umskz = 'A'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KA' and wa_bseg-bschl = 35.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if ( wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 29 )
and wa_bseg-umskz = 'A' or
wa_bseg-umskz = 'B' or
wa_bseg-umskz = 'I' or
wa_bseg-umskz = 'M' or
wa_bseg-umskz = 'O' or
wa_bseg-umskz = 'V'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 27.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'Z1' and wa_bseg-bschl = 21 .
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
**if wa_bseg-shkzg = 'H'.
***wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
**wa_out-othdeb = wa_bseg-wrbtr.
**else.
**if wa_bseg-shkzg = 'S'.
***wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
**wa_out-othdeb = wa_bseg-wrbtr * -1.
**endif.
**endif.
**endif.
***if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 27.
wa_out-othdeb = wa_bseg-wrbtr.
***endif.
***if wa_bkpf-blart = 'Z1' and wa_bseg-bschl = 21.
wa_out-othdeb = wa_bseg-wrbtr.
***endif.
read table it_out3 with key lifnr = wa_bseg-lifnr binary search.
on change of wa_bseg-lifnr.
*move: wa_lfa1-name1 to wa_out-name1,
wa_lfa1-lifnr to wa_out-lifnr.
wa_out-opbal = it_out3-wrbtr.
endon.
*if wa_out-opbal is not initial.
*wa_out-bal = wa_out-opbal + wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
**else.
*wa_out-bal = wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
*endif.
wa_out-bal = wa_out-opbal + wa_out-purch + wa_out-paym + wa_out-grdeb + wa_out-othdeb + wa_out-othcre.
at end of lifnr.
*wa_out-bal = wa_out-opbal + wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
append wa_out to gt_out.
*collect wa_out into gt_out.
clear wa_out.
clear it_out3.
clear wa_bsegnew1.
endat.
endif.
clear: wa_bseg, wa_bkpf, wa_J_1IMOVEND.
endloop.
loop at gt_out into wa_out.
collect wa_out into gt_out1.
endloop.
endform. " sub_process_data
Regards,
Santosh Kumar M. -
Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan FoleyThank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. -
Is Adobe Bridge included in my Creative Cloud Subscription. I have the Photoshop and Lightroom subscription for Mac
Addendum: I can find this on Adobe's Acrobat DC FAQ page:
Can I get Document Cloud services if I’m an active Creative Cloud Member?
Yes. Many Creative Cloud plans include Acrobat Pro DC with Document Cloud services. Explore Creative Cloud plans.
However, if I follow the link to Creative Cloud plans, there is nothing to tell me whether Acrobat Proc DC is included in any of the plans. My plan is a yearly individual at $49.99/month. -
A few questions before I buy a new iMac/Mac mini and sign up for Creative Cloud.
Hello Everyone,
I am looking to purchase a new Apple computer and sign up for Creative Cloud within the next week and I have a few questions that should be answered before I proceed.
My wife and I own a business and we will be using the CS6 apps to create brochures, Constant Contact mailings, product package inserts, edit product photography for print and web use, and short HD how-to videos. We are not graphics professionals or power users and wont be doing anything too complicated.
Any help and answers will be greatly appreciated.
I will start with the hardware questions first:
I am trying to decide between the iMac and the Mac mini.
The iMac is a 2.7Ghz Quad-core Intel core i5 and comes with 4GB of memory that is expandable to 16GB, which I will do for sure. It comes with a Radeon HD 6770M graphics card with 512MB of GDDR5 memory(not upgradable), and a 1TB HDD that runs at 7200RPM. This unit meets the specs required.
The 2.5Ghz Mac Mini comes with 4GB of memory that is expandable to 8GB, I will also do this. It has a Radeon HD 6630M graphics card with 256MB of GDDR5 memory(not upgradable), and a 500GB HDD that runs at 5400RPM. This unit meets all the spec(I think) except for the speed of the HDD.
Question: Will the mini run the software without too much of an issue considering the speed of the HDD?
Question: Will the iMac run the software significantly better to justify the price difference?
I already have 1 mini(purchased 4 months ago, with the same specs listed above) and will be purchasing a second computer for my wifes desk. If the mini will run CS6 fine, that is great and we can save a few bucks. If my mini will not run CS6 well, I will get the iMac for her desk as she will be doing the bulk of the work in that regard anyway.
Now a couple of software questions.
After reading hundreds of reviews and forum posts over the last few days I have seen many people having this or that issue. It seems to me that most of the issues are because of upgrades from Lion to Mountian Lion after installing CS6 first or trying to open CS3,4,5 files in CS6.
If you want to know what issues have me concerned take a look at just this one forum:
http://blogs.adobe.com/jnack/2012/07/adobe-cs-apps-mountain-lion-no-known-issues.html
Similar issues are discussed in the Apple forums as well as many other places around the web.
I am not a computer professional but I know enough to maintain my systems and keep them running smoothly.
We do not have any Adobe software installed on my mini and will not be opening any files from previous versions of Adobe product in the new CS6 software. These will be a clean installs on pristine systems running fully updated Mountian Lion OS's on both machines and creating new files from scratch.
Question: Should I be expecting any issues like the ones I have read in the forums and blogs or are these just the normal things that happen when upgrading to new software with multiple hardware configurations?
My feeling is that we will not be having too much of a problem due to the clean installs and no files from previous versions.
Next up, the Creative Cloud(CC) FAQ states that you can install on 2 machines but can't open stuff at the same time.
Question: Does this mean we can't be using any CS6 apps at the same time or just not using the same app at the same time?
Example: PS and PS on both machines at same time = No, PS on one and Dreamweaver on the other at the same time=Yes?
The CC FAQ page says Adobe will add Lightroom 4 later in 2012 while the main CC page lists it as available now.
Question: Which is true?
My mini is registered to me, with my name, iTunes account, Apple ID etc.
Question: Do I need to do the initial set-up of the new machine with all my information to ensure the CS6 suite works on both machines? Do the computers need to be registered(as far as Apple configuration is concerned) to same person for them to work on one CC account or can I install CS6 on any 2 machines regardless of how they were initially set-up?
This may seem like a silly question but I want to avoid any problems before they happen.
Well, those are all of my questions at the moment. To anyone who made it this far in my looooong post, Thank You so much for your time. I appreciate your expertise and knowledge and hope that you can help me make this decision.
Cheers,
Alex BogdanAlex,
I'll try and answer your questions as best I can.
Qn 1 Which Mac.
Ans:- As I understand it both units will run Adobe CS6.
Which one really depends on what you wand from CS6. If you are looking for high end demand and performance, then I would go for the IMac
Your Specs for the Imac are right. However if you buy your IMac straight from Apple there are even higher specs.
You can get:-
3.4 GHz i7 processor rather than the i5
2GB video card as opposed to a 1Gb video card.
Of course such a model will cost you more.
In the end it is needs compared with money to spend. That is only a decision you cam make.
Q2:- Will the higher cost for the Imac justify copst.
Ans:- Again it depends on what demands you intend to make on the hardware and software.
But I note you have a business and if that businees expects to high demand and high speedy performance then I suspect the Imac would be more able to provide your needs.
Again only you will know the answer to that.
Q3:- Questions about CS6 reliability
Ans:- I have been with Adobe for way over 10 years.
Speaking, only for myself, it is the most reliable software on the market.
It is true that if you look down this form, like any other and I am thinking about the Apple discussions forum, you will find numerous instances of problems.
Again this is only my opinion, but although all these problems are real for the individuals:-
First it is not clear why they have the problem e.g. what have they done or not done.
Second, they are in the minority of the total users using the hardware / software.
The only problem I am aware of with CS6 is Acrobat X. I understand it has been sorted Adobe, however it cost me so much work I have removed it from my system and reverted to Acrobat 9
So what I am saying is that there are only two comapnies I rely 100% on: They are Adobe and Apple.
So if you are happy with my opinion I would not worry about Adobe CS6
Qn 4:- CS6 0n 2 machines.
Ans:- Yes you will not be able to run the same program similtaneosly.
I believe, if it is important that you do run the same program together, that you can acquire a further licience from Adobe to do that.
You would need to contact Adobe about that.
Qn 5:- Lightroom 4
Ans:- Lightroom is now available as part of Creative Cloud.
Qn 6:- Set up for individual machines
Ans:- I do not believe you do. Once you have set up your Creative Cloud account you go to the apps site and download the apps for each machine.
Each machine downloads the apps and your machine and the apps are registered by Adobe.
Here is something that you may want to know:-
Because I was so unhappy loosing all the Acrobat data with Acrobat X I ended up deleting Acrobat X
However as far as Creative Cloud is concered Acrobat X is still on my machine.
It is not a problem for me because I am happy with Acrobat 9, it fullfils my needs and has not crashed and lost me all my bookmarks.
However here is the point:-
Adobe, when there was a problem with Acrobat X requested that no-one deletes the application.
Though I do not know for certain I believe registration of the apps you have with Creative Cloud are registered with Creative Cloud in their database. Therefore were you to delete an app, it will still be registered with Creative Cloud and you will not be able to download a further copy even though the app is no longer on your machine.
Therefore it maybe not a good idea to delete an app when you no longer have a use for it. If you want it back I suspect you will have to contact Adobe Support
Personal Comment:-
It is true many unfortunately have had all sorts of problems, including me with Acrobat X.
That said, Creative Cloud in my view has been a major advance in how Adobe delivers software. I have no regrets with signing up to Creative Cloud and I expect to remain with it.
Hope all of that goes some way to answering your questions. -
Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank youPlease refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree -
Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.
I have tried a Clean reinstall but it did not help.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
SAP NetWeaver 7.01 Java installation on MSCS and Log shipping for DR
Hi Experts,
Can anyone please explain if below is possible :
- We have installed Netweaver 7.01 Java application server on Microsoft clustering which is working perfectly ok.
-Now we are looking at building a DR solution for the above installation using SQL Server 2008 Log-shipping. The DR site has the same MSCS configuration as the primary site.
-If we log-ship the production database and create a secondary database in "standby" or "norecovery" mode, how do we install a Passive SAP Central instance in case we want to failover from the primary to secondar ?
- We know that we have the primary database log-shipped to the secondary site and in the event of failure we can switch the roles and make secondary as primary and then perform the system copy steps on the MSCS. the drawback here is that it will take a long time to bring the system online if we perform the system copy. Our RTO is one hour only so this is not acceptable.
Question : Is there anyway we can install the Central Services and Applicaiton servers beforehand on the secondary site on the secondary log-shipped database so that in the event of failure all we do is bring the secondary database primary and then start the SAP on the secondary site ?
If yes then can anyone point me the any SAP note or documentation that has the details of how to do this.
I have already looked at 1101017, 965908 but its not clear how we can perform the installation on the JAVA stack only.
We want to implement similar to what is shows in the below diagram :
http://help.sap.com/saphelp_apo/helpdata/en/fc/33c028d58511d386ee00a0c930df15/content.htm
Appreciate if someone can assist in resolving the above query.
Thank you.
RAThanks Markus for your reply.
I did looked at the HA web page from SAP and configured MSCS for HA but there's no information regarding DR setup. All it says is setup a log shiping which we already know but there's no procedure to setup SAP on the DR site(Passive SAP central instance)
My original question still stands :
- Is system copy the only option that we need to perform at the DR site in the event of failure ( Assumption is that we ieve make the secondary database as primary and also sync file system for JAVA using SAN replication technologies)
- We have to achieve an RTO of 1 hour which is not possible in this case as performing system copy using MSCS HA option will take few hours to setup and test.
-The link "http://help.sap.com/saphelp_apo/helpdata/en/fc/33c028d58511d386ee00a0c930df15/content.htm" shows that we can have SAP PAssive central instance. Whats the procedure of installing this Passive instance on the secondary site so in the event of failure all we do is make the secondary database primary and bring the SAP system online(installed already - no system copy performed) and also file system is already is sync.
Thank you.
RA
Maybe you are looking for
-
Problem with PBEWithMD5AndDES on RedHat 9
Hi, I'm trying to encrypt a string then save it in the database, then retrieve the string and decrypt it. I have tested this on JDK1.3 (Sun and IBM) yet it works on Windows XP Pro and Debian, but as soon as I try it on RedHat 9 it fails. Where it all
-
"Cannot use adobe reader to view pdf in your web browser" error in Windows 7 and Acrobat pro 8.1.7
I get the error "Cannot use adobe reader to view pdf in your web browser. Reader will now exit. Please exit your browser and try again" in Windows 7 x32 and Windows 7 x64 with Acrobat pro 8.1.7. This happens when trying to open a PDF file in Inte
-
Best Way To Upload Sales in SAP
Hi, I wanted to know what is the best way to upload sales in sap system, currently we are doing manually. We fetch data from the 3rd Party POS system and converting it into XMLfile and create it's IDOC, After that uploading sales by t-code BD20. We h
-
How do i save pics to my computer with windows 7?
I go on facebook and right click on save image as but it don't save to my pics why won't it save to my pics on my computer it works with internet explorer my computer is windows 7.
-
A litle Help in the Master-Detail Pages
Hello everybody how can i have more than recordset in the detail page because im stuck