PI and SLD Transports using CTS+

HI all,
We have a three system PI landscape (DEV.QAS.PRD)
There is a two system separate SLD landscape (DEV/QAS & PRD SLD) - this is also serving PI, NWDI, Portal, & solution manager has its own SLD.
CTS+ has been configured to transport all PI objects in a PI Domain controller.
In trying to integrate SLD to PI domain controller, the SLD transport is created, we can see it in the transport organizer but after releasing the SLD transport , it does not show up in the SLD source system defined in the domain controller? Any ideas why?
The transport content is in /usr/sap/trans/data at the file system level.
Regards, Neeta

I do not think CTS+ support SLD content transport. You have to use manual export/import mechanism from with in the SLDs.
VJ

Similar Messages

Error while transporting using CTS

Hello Everyone,
While transporting the ESR changes from Dev to integration environment i am getting this error.
Its a SOAP to RFC scenario and first time it worked fine. today when i did some changes and wanted to move again through CTS its giving a problem . Its SAP 7.11 version.
CTS Deploy Service - Version 0.93 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL =
SoapFaultCode:5 Authentication failed. For details see log entry logID=1ADC6A3175029F4D000000040025
>>>80B2 in security log.
Deployment
End date and time : 20120119234349
Ended with return code: ===> 12 <===
Thanks
Ravi

Hi Ravi,
Please check this forum thread which talks about same issue:
CTS+ For PI Error: SoapFaultCode:5 Authentication failed
Regards,
Ashutosh

Source Business System in SLD Production using CTS+

Hello Forum
While defining target groups for Prod Business Systems in case of CTS +, What should be the source? Dev or QA. I feel it should be DEv as the request gets genearted in Dev, the same is imported in QA and the same is visible in Prd.
Regards
Monika

As transports are initiated from DEV, your DEV business system must be available in prod SLD to enable target groups between these two.
Srikanth Srinivasan

Cannot move ID objects to Quality Server using CTS

Dear Friends,
We are using PI 7.1. We have created necessary HTTP & TCP/IP Destinations in PI QA server and then transported using CTS all SLD & ESR objects.
Now we are struck up during moving ID objects from DEV PI to QA PI.
Please give me your solutions to resolve this issue.
Thanks
John

Are you getting any specific error at any point? First make sure that SLD transport is properly done, with objects of both Dev and QA system and transport targets properly defined.
Regards,
Prateek

How to use CTS+ in PI 7.31 Java-Only?

Hi Gurus,
The basis colleague told me that the configuration with CTS+ is finished and I can use it to transport objects.
In PI Test-System E03 the Tools "Export Design Objects" the Mode "Transport Using CTS" is avaiable. Everything runs well.
Now in the Transport Organizer i can see the following status:
How to import them into Q system? In the Quality Q03 and Product P03 systems the tool "Open CTS Transport Organizer" is deactivated.
Are they configured correctly?
Any helps would be highly appreciated.
Regards
Christine

Hi Christine,
I guess you have to transport it manually into Q. Do you have any system which is responsible for transporting objects?
For our PI 7.31 we create transport requests on development stage, then we transport them via transaction STMS in Solution Manager into the next stage because for this case, this is our central transport platform.
Your basis colleagues should know which transport domain was set up for your PI.
Regards
Claudia

"Transport using CMS" option does not appear

Hello Guys
I use CMS for transporting, and it works fine! But today I created a new SWCV, created a Track on CMS to this SWCV too. But when I choose "Export" on IR, the screen that appers does not show the "Transport using CMS" option. Only the "Transporte using File System" option is available for this SWCV.
Any idea?
Thanks in advance
Julio

Hi (and thanks for answering)
The SWCV is in http://host:port/rep/support/admin/index.html, but its name is "Not available"
I did update my domain, but it didnt work at all (the name of the SWCV still is "Not available" and the "Transport using CMS" option didnt appear in IR).
Julio

Does CTS+ work with SLD transport targets for ID transports?

Hi,
does CTS+ work with SLD transport targets for ID transports?
did any of you ever used it ?
thank you,
Regards,
Michal

Hi Michal
I would be interested to find out about this..
Hopefully this new project will use 7.1 and Basis are doing all the SLD and the CTS+ config..
I have every faith in them!!!! :-O
There is a document about transporting repository and directory objects, but every version I have found is corrupt - or I cannot open in Adobe...
You may have more luck!
Change and Transport System
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
"This How-to Guide explains stepby-step how to set up the enhanced Change and Transport System (CTS) for use in conjunction with usage type Process Integration (PI) of SAP NetWeaver (formerly known as SAP NetWeaver Exchange Infrastructure or SAP NetWeaver XI). CTS introduces a new transport handling mechanism that offers tighter integration for the transport of ABAP, Java, and Integration Builder objects (Integration Repository and Integration Directory) using the Change and Transport System (BC-CTS) functionality."
Maybe in six weeks I can actually answer this for you! I'm sure you'll have the answer by then!

MDM 7.1 Transport Management using CTS+

CE: 7.2
MDM: 7.1
PI: 7.1 EHP1
ERP: 6 EHP4
Hi,
For central master data management, we are building a solution based on the components mentioned above. Our current landscape for ERP has 10 systems due to the requirements of the project. This includes SBX -> DEV -> QAS -> INT -> UAT -> PRE-PROD for project. Then we have SBX -> DEV -> QAS -> PROD for business as usual. The idea is that we the first phase goes live, BaU will be used to support the live environment while project environments can continue to be used for new functionality development in various phases over several years.
We plan to use CTS+ to manage the transports in the landscape. However, the question is whether we need 10 MDM system to match ERP, or could we use less systems without impacting the overall quality and effort of delivery?
Also keep in view that CE will be used to run the custom BPM workflows. Moreover, we'll deploy MDM web services on CE server to be consumed by Web Dynpro JAVA UI components. All in all, the overall solution will span several development components across ERP (custom enterprise services), PI (custom integration content), CE (custom WD JAVA UI, MDM web services, workflow), and MDM (tables, fields, relationships, roles, XML schemas, etc).
Given that MDM repositories are self-contained, and we can create more than one repositories on QAS e.g. for INT and UAT, I am trying to identify any potential pitfalls/technical implications of using less MDM environments for more ERP systems.
Lets say we had 3 repos on QAS MDM server: REP_Q, REP_I, and REP_U. If we wanted to test certain functionality in REP_I, we could transport it from REP_Q to REP_I hosted in the same MDM system. Similarly, these changes could be propagated to REP_U environment for further testing.
So the user can initiate a process on CE server which could call web services to create data in REP_I. Once successful, changes can be transported to REP_U and the user can use CE to call web services for REP_U for data management.
Do you have a similar landscape? Have you tried using less MDM systems to host multiple repositories without overcomplicating change management? Thoughts???
Thanks for your time.
Regards,
Shehryar

Hello Shehryar Khan
We are using 3 level environment DEV-QA-PROD.The same situation with ERP for ABAP development.
DEV and QA working on different physical servers but in the same LDAP.
PROD - has own physical server and own LDAP.
For migrated data tests we duplicate repository from PROD to DEV and named it - MIGRATED.
Business logic we are realize on DEV. If business logic and migrated data tests(on MIGRATED repo) have been finished succesfully We migrate data from MIGRATED repo to DEV and doing complex tests(business logic + new data).
The same steps we are doing on QA and then on PROD.
Regards
Kanstantsin Chernichenka

SOAP Use Adapter-Specific Message Properties and Variable Transport Binding

Hi Friends,
   I am new to use to Soap Adapter. Please help me out bellow doubts.
   1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
   2. Where exactly we r using below parameters.
Remote User : (technical name: SRemoteUser )
Remote Host : (technical name: SRemoteHost )
SOAP Action (technical name: SHeaderSOAPACTION )
To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
Variable Header : (technical name: XHeaderName1 )
Variable Header : (technical name: XHeaderName2 )
Variable Header : (technical name: XHeaderName3 )
Thanks&Regards
G.Bhanuprakash

Hi,
   1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
SAP Help says both are needed to be checked when you want to process adapter attributes
Configuring the Receiver SOAP Adapter - SAP NetWeaver Exchange Infrastructure - SAP Library
These attributes can be get/set using dynamic configuration and their technical names are what you have pasted:
Remote User : (technical name: SRemoteUser )
Remote Host : (technical name: SRemoteHost )
SOAP Action (technical name: SHeaderSOAPACTION )
To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
Variable Header : (technical name: XHeaderName1 )
Variable Header : (technical name: XHeaderName2 )
Variable Header : (technical name: XHeaderName3 )
Remote User - the username used to send a message to the adapter engine using SOAP
Remote Host - hostname which the remote user used
SOAP Action - SOAP Action of the XI webservice (sender) / SOAP Action of the receiver webservice
Variable Headers are additional key-value pairs in the HTTP Header that could be accessed in the XI Header using dynamic configuration. The limit is only three though.
Regards,
Mark

Release strategy transport using BD91/ BD92 and BD93

I would like to move Characteristics/ Class and Release strategy using ALE transactions BD91/ BD92 and BD93.
The question I have is that do I run the ALE transaction from the Source enviornment( Development box) to export it toTarget box( QA)?
Or do I run it in Target box (QA) to import it from DEV box?
Thanks
Raj

Hello,
You need to setup Customer Distribution Model (BD64) and Partner Profiles in DEV (Outbound) and QA (Inbound) systems with ALE Port. Then run the transactions BD91, BD92 and BD93 in DEV. If the partner profile in DEV is setup to transfer immediately, IDOCs will be transferred to QA.
Thanks,
Venu

Using CTS+ from CE 7.2

Dear SAP Gurus,
We are using CE 7.2 and i are in the process of integrating it with our CTS+ setup for importing the JAVA transports. As SDM is not available on the CE system, we have used the instructions in the following link and configured port 5XX04 with an ID that has admin rights on the CE system.
Link - FAQs on the Enhanced Change and Transport System
But when we try to deploy any TR using CTS+, we get the following error:
ERROR -
TransportEntity (Id:4EE514D932FA0A52E10000000F8DE01C) status set to 'ERROR'.
Start 'DI import' service (20111216 082706 GMT)
===============================================================
End deployment (2011-12-16 08:27:06.0178 +0:00)
Error stack trace
com.sap.di.cts.imp.service.beans.core.exception.DIImport_PermissionDeniedException: User 'T564333' does not have permission to perform import
com.sap.di.cts.imp.service.beans.core.DIImportServiceBean._performImport(DIImportServiceBean.java:91)
com.sap.di.cts.imp.service.beans.core.DIImportServiceBean.performImport(DIImportServiceBean.java:65)
com.sap.di.cts.imp.service.beans.api.DIImportServiceLocalLocalObjectImpl0_0.performImport(DIImportServiceLocalLocalObjectImpl0_0.ja
va:102)
I understand that the ID T564333 mentioned here does not have permission to perform import. But this is not the ID that we configured. The ID we configured is different and we have configured it in the following places on the Domain controller.
Goto --> SDM/DC User/Password
Goto --> SLD User/Password
Goto --> Development Infrastructure --> DI Service User/Password
Goto --> Development Infrastructure --> DI SLD User/Password
Kindly let us know where else we would need to maintain the User ID/Password details for a successful deployment. Thanks in advance.
Regards,
Savan D.

Dear SAP Gurus,
Kindly let me know how to overcome this issue. None of our imports have been successful and we only get this error. Kindly let me know what other configurations need to be done.
Thansk & Regards,
Savan D.

SLD Transport issue

Hi All,
I have transport issue with SLD objects. I have different SLD's for my Development and Quality.
1) Is CMS a option to transport the SLD objects like Business systems and Technical systems.
2) I have technical System XYZ on Development system with 2 SWCV's installed for it but in the Quality i have for the same system XYZ i have three SWCV's installed, now if i transport the technical system XYZ from Development to Quality i want the additional SWCV installed for XYZ to be removed, but this is not happening, i even tried to transport the concerned SWCV and Product from Developmen to quality still the installed systems doesnt change as Desired.
Please tell me if its possible and how can be achieved.
Thanks and Regards,
Raj.

Hi,
Two types of transport mechanism are used in PI.
File transport method.
CMS transport method.
One upcoming is CTS+.
Perform the following to import/export ID objects.
1. To export or import directory objects, call the configuration maintenance screen of the Integration Builder.
2. Call the context menu for an object in a collaboration profile in the Integration Builder navigation tree and choose Export.or choose Tools ® Export Configuration Objects
3. Select the Transport Using File System mode and follow the wizards instructions. When selecting individual objects, you can use drag and drop to drag the objects from the navigation tree and drop them in the object selection field.
The Integration Builder saves a binary export file with the suffix tpz in the export directory of the directory server
Do not change the file name of the export file. If you do, the Integration Builder will not accept it as the appropriate file when you import.
4. To import the export file(s) to another Integration Directory, first copy or move it to the import directory of the target directory.
5. Call the configuration maintenance screen of the Integration Builder for the target directory. Choose Tools ® Import Configuration Objects...
6. Select the export file saved in the import directory by using the dialog box that appears.
If the import is successful, the export file is moved to the subdirectory Configuring Groups and Transport Targets
Configure the CMS:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Overview of Transition from Dev to QA in XI
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
regards
Aashish Sinha
PS : reward points if helpful

Why use CTS? CTS vs CTS+

Hi,
I am new to the forum. Would like to ask on how transports were being moved before CTS was invented? And what are the benefits of using CTS compared to any old method of moving transports?
Also, what is difference of CTS and CTS+? Is it just the capability of moving non-ABAP objects?
Thanks in advance.

CTS:
The Change and Transport System (CTS) is a tool that helps you to organize development projects in the ABAP Workbench and in customizing, and then transport the changes between the SAP Systems and clients in your system landscape.
This documentation provides you with an overview of how to manage changes with the CTS and essential information on setting up your system and client landscape and deciding on a transport strategy. Read and follow this documentation when planning your development project.
For practical information on working with the Change and Transport System, see Change and Transport Organizer and Transport Management System.
What ever is developed in sap is assiged to a transport request, it is created by transaction SE09 and then it is released when the data needs to be transported in various other systems.
The Change and Transport System (CTS, SAP NetWeaver usage type AS ABAP) is enhanced with SAP NetWeaver 7.0 SPS 12 to be capable of transporting Non-ABAP object types, such as from the SAP NetWeaver usage types PI (Exchange Infrastructure), EP (Portal), etc. The enhanced CTS I will refer to as CTS+. Using its new capabilities further simplifies system administration of an SAP system landscape.
rfer: Change and Transport System
CTS+ in a SAP NetWeaver Portal Landscape:
http://help.sap.com/saphelp_nw04/helpdata/en/03/dcb6b6048711d3b42a00609419f767/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0249083-c0ab-2a10-78b8-b7a7854b1070
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
CMS
Change Management Service (CMS) is an infrastructure based on Netweaver Developer Infrastructure and it is used to transport development objects (e.g. XI interfaces) between different systems in your lanscape.
CMS is running in SAP J2EE Engine
CMS provides central for administrative and QM tasks for all JAva development Systems.
Features
Track defination
Development configuration defination
Defien runtime systems and deployment paths
CMS is the central point of access for developers to get new development configurations
Read this to have more details on CMS and it's use with XI
CMS for SAP Exchange Infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Configuration of CMS in Central NWDI & SLD to transport XI objects
Configuration of CMS in Central NWDI & SLD to transport XI objects
How to Use CMS in XI 3.0.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
CMS based transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Change and Transport Lists for CMS Transports
How To Transport XI Content Using cms:
CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Edited by: bhavanisankar.solasu on Feb 2, 2012 12:17 PM

How to Migrate the open transports in CTS+

Hi Experts
We are planning to implement CTS+ in our organisation, after implementing the CTS+ it's possible to migrate the open transports in CTS+
Thanks & Regards
Venkat

Hi venkat,
what i understand is you are already having some TR on which work is gng on and now you want to add.
no problem
in your CTS+ when you create a TR just merge the old TR into this
or
you can also you the Copy objects
in SE09
this is very common technique use by developers so just ask them to check in se09.
how it ans ur query
Regards
Prakhar

Integration Directory Objects Transport Using the File System

Hi
I am trying to do the IR and ID Objects Transport Using the File system... I am able to Transport the IR Objects and IMport in to QA ... but when i try to Import ID objects its giving me the error...bcoz all the ID objects pointing to theSAP R/3 DEV system ( Interface Detremination, receiver determination ...)... do i have to config something in SLD ..so when i import the ID objects in to QA system it points to correct SAP R/3 QAS system...
and we are using single SLD for all the DEV , QAS and PRD system
SV
Edited by: S V on Oct 15, 2008 4:08 AM

Hi,
You will have to configure transport targets like for different business systems in your dev environment, there shouls be corresponding Business systems in QUA environment. For more details refer the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
Thanks!

PI and SLD Transports using CTS+

Similar Messages

Maybe you are looking for