PI Basis and LUWs

Please enlighten :
1) What is PI basis
2) What is LUW(Logical Unit of work)
In a Delta Q, I see that say for example
     DataSource                        LUWs                Actual number of records in DS
0Trans control                      634                      25,00,000 (2.5 million)
0Goods_MOV                      132                           20,000 (twenty thousand)
What is the relationship between actual number of records with the number of LUWs? How is this LUW calculated and displayed? Any setting/configuration involved?
Points will be assigned for useful answers.
Regards
Shivu

Hi..
i think so the delta is queued delta ..
Depending onthe application up to 10000 delta extractions of documents per data souce are summarized into one Luw .
with regards,
hari kv

Similar Messages

Business Address Services (BAS) and Where-Used ADRV/ADRVP

Can someone point out any good sources of information on Business Address Services or possibly its predecessors either online or hard-print? I've been through the help.sap.com information for BAS and all sorts of SAPNotes without finding what I'm looking for.
In particular I'm trying to understand default SAP's usage of the Where-Used links in BAS that are stored in the tables ADRV and ADRVP.
My Issue: If I create a Sales Document in SAP referencing a partner address stored in BAS there is no Where-Used ADRV record created. So I cannot use the address number of the ADRC record to find which documents are referencing it via ADRV.
steps to recreate:
- Using existing Customer/Partners
- Create Sales Document (Order) adding partners by selecting partner #'s and not manually overriding any address information.
- Address of the partner is now linked in the Sales Document via VBPA-ADRDA=D and the ADDRNUMBER references the same ADRC address records that KNA1 points to.
- There is no Where-Used record created in ADRV indicating that the Sales Document is linked to that address.
- If I change or delete the ADRC record from KNA1 then I do not have the information available to take any special actions on linked Sales Documents.
Note: If you manually override the address or use a one-time address when entering the Sales Document then the new address is linked via VBPA-ADRDA=E and a Where-Used record is created in ADRV. Also any follow-on documents created with reference to the Sales Document will also have Where-Used records created in ADRV. So in the case of changed or manually entered addresses ADRV does work as I would expect it to.
I am observing this behavior in both R/3 4.6c and ECC 5.0. Trying to understand why SAP is using or not using ADRV in these situations and whether the behavior can and should be changed.

Can someone point out any good sources of information on Business Address Services or possibly its predecessors either online or hard-print? I've been through the help.sap.com information for BAS and all sorts of SAPNotes without finding what I'm looking for.
In particular I'm trying to understand default SAP's usage of the Where-Used links in BAS that are stored in the tables ADRV and ADRVP.
My Issue: If I create a Sales Document in SAP referencing a partner address stored in BAS there is no Where-Used ADRV record created. So I cannot use the address number of the ADRC record to find which documents are referencing it via ADRV.
steps to recreate:
- Using existing Customer/Partners
- Create Sales Document (Order) adding partners by selecting partner #'s and not manually overriding any address information.
- Address of the partner is now linked in the Sales Document via VBPA-ADRDA=D and the ADDRNUMBER references the same ADRC address records that KNA1 points to.
- There is no Where-Used record created in ADRV indicating that the Sales Document is linked to that address.
- If I change or delete the ADRC record from KNA1 then I do not have the information available to take any special actions on linked Sales Documents.
Note: If you manually override the address or use a one-time address when entering the Sales Document then the new address is linked via VBPA-ADRDA=E and a Where-Used record is created in ADRV. Also any follow-on documents created with reference to the Sales Document will also have Where-Used records created in ADRV. So in the case of changed or manually entered addresses ADRV does work as I would expect it to.
I am observing this behavior in both R/3 4.6c and ECC 5.0. Trying to understand why SAP is using or not using ADRV in these situations and whether the behavior can and should be changed.

Internet problem with New Airport Extreme base and new Macbook Pro

So I bought a Airport Extreme base station with my new Macbook pro.
My desktop system uses a DSL modem which is connected to my computer via an ethernet cable. It works flawless. I can also unhook the hard ethernet connection from the desktop and connect it to the Macbook Pro with no problems.
I then connected the ethernet cable from the DSL router to the WAN port on the Airport Base.
I have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
Thanks,
Danny

I have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Make sure you perform a complete power recycle when switching network components.
Modem/Router Power ReCycling
- Power-off the DSL modem & AEBS. (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the DSL modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
If that doesn't resolve the problem, and your DSL ISP requires PPPoE for connectivity, you will need to set that up on your AirPort Extreme Base Station (AEBS) as follows:
Connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Admin Utility, check these settings:
Internet tab
- Connect Using: PPP over Ethernet (PPPoE)
- Account Name: <ISP account name>
- Change password: <ISP password>
- Always stay connected (checked)
- WAN Ethernet Port: Automatic
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
No, the AEBS will no longer be required.

Apple tv viera cast 2008. I want to add apple tv via hdmi connection, viera cast which has Amazon prime is already connected thru ethane port on tv. my network is wifi from APE base and APX. Will this set up work?

I want to add apple tv via hdmi connection , and I already have ethernet input of tv for my viera cast connection, which gets Amazon prime. Wireless connection is APE base and APX, Want to add
apple tv to get Netflix so I can cancel my xfinity premium channels. Will this set up work. p.s as you can tell I am a Mac novice.

Providing you have a free HDMI port on the TV and the location you would put the Apple TV will allow it to connect to your network, you should be good to go.

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

648 max , testing base and extended memory

I dont see the thread i answered to one time that someone spoke of using ddr400 with 648 max or max-L board and they were getting testing base and extended memory error from the LED's. Well i just got the same error today and my system would not boot i cut the power to the PS. and turned it back on it would start to boot and hang i could barely get to the windows logo sometimes the vid card wouldnt even boot the logo to the screen. This is with an updated mobo that msi sent me that i had just put in , it seemed to run fine at first then this problem started occuring. The only difference i had in the setup from the previous outdated board was i had the mem in DIMM 3 and not DIMM 1, so i moved the memory back over to DIMM 3 and now the problem is gone. Just something for those of you with the same problem to try.
Oh and i forgot one more issue, i cannot set the dram speed in the bios manually i have ddr 333 it should be 167 mhz so i set it to 4/5 and the system will not boot at all i end up having to reset cmos. I called MSI about that and they told me to just have it set to SPD , I said i know that and im fine with leaving it that way but it should let me set it manually if i wanted to and that i wondered if that had anything to do with the random " testing base and extended memory " problem.

It was probably myt thread...
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=6204&boardid=10&styleid=1
Have done some testing with both DDR333 and DDR400 and my results are in the thread.
Right no I'm using my DDR400 as DDR333, manually set to 167MHz, using DIMM1, and havn't seen any problems. I'll try the DIMM3 to see if I get any changes.
And by the way.. I tried setting my DDR400 manually to 200MHz and it wouldn't boot at all. After a lot of ugly language I finally got it back to the BIOS....after a reset of the CMOS.
Seams like you should use SPD if you want to use the correct freq for your RAM.
Have you tested the new 1.3 BIOS?

We have 2000 base and advanced license we are running ISE 1.2 , if we upgrade to 1.3 what happens to the license do we need to buy plus/apex license

We have 2000 base and advanced license we are running ISE 1.2 , if we upgrade to 1.3 what happens to the license do we need to buy plus/apex license

when you migrate to 1.3 your license will be updated , advance license become plus,apex

Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number?

Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number? Or how can I find out who owns it?

No. Turn it into the military police.

How can I adjust base and trebble on my 2007, MacBook Pro?

Is there any way to adjust base and trebble for external speakers hooked to my 2007, Macbookpro?

http://itunes.apple.com/us/app/boom/id415312377?mt=12&ign-mpt=uo%3D4

We have a movie downloaded on a laptop connected to the internet pluged into our router in the basement and an apple tv upstairs trying to play the movie through home sharing but it wont play. can anyone tell me whats wrong?

we have a movie downloaded on a laptop connected to the internet pluged into our router in the basement and an apple tv upstairs trying to play the movie through home sharing but it wont play. can anyone tell me whats wrong? it comes to the last loading page where it shows the desscription of the movie befor it acually plays.

It can come about without any change done by the user, and it's not just from other networks. The placement of the router can also affect performance. Also make sure router is up to date.
Apart from that would be the reboots.

Expansion base and dock stations

i love expansion base and my dock station xb3000, the speakers are great, is fantastic, i bought my last laptop because i could connect with, so i want to know if HP is going to do more expansion base,
two years ago i bought a souchsmart tx2 `1015, onlu because had expansion base
now my old presario is to slow, is getting to old...i need to buy i new one very soon, i would like one with expansion base,
so i want to know if HP is going to have expansion base in some new model of laptop notebook
my dock station is a great product
please do not stop to make a good product!

Unfortunately docking stations, like firewire ports and pcmcia slots, are disappearing from laptops other than the very highest end business models. So right now no consumer model has a traditional snap down docking station. The only models that do are the Elitebook, Probook, Zbook lines:
http://h30094.www3.hp.com/product/sku/10432932

Net tax base and gross tax base is not defined in FB70

Dear SAP Gurus,
I am booking the customer invoice directly through FB70. While booking the same I am using the tax code A0 (Zero Output Tax) Tax Code column as the account is mandatory for Ta Code. But when I post the transaction system gives the following error.
Net tax base and gross tax base is not defined
Message no. F5341
Diagnosis
For the company code, it was specified that the net value (amount minus cash discount) is the tax basis and the gross value (amount including taxes) is the cash discount base. This constellation is not supported by the system.
Procedure
Correct the configuration for the company code in question.
I also check the FXTP confiq the A0 tax code is assign company code & also define & assign in zero tax code.
Please give the solution ASAP.
Regards,
Sandeep

Hi,
Check OBY6 as suggested by Kalyan or use Tcode - OB69.
Regards,
Shridhar

HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

Wirelessly
Just select the option to make your AirPort Express join an existing network in the setup process

SAP Basis and Portal Certification Materials

Hi Experts,
I would like to appear for the certification : C_TEP10_04s.
Below are the topics:
Can anyone share me the material to prepare for the below certification.
Please send it to my personal maild id: <removed>
1. SAP Web AS Fundamentals
SAP Solution Offering
Navigation
SAP System Architecture
Enterprise Services Architecture
SAP NetWeaver, Overview
2. SAP Web AS ABAP Administration
Starting and Stopping SAP systems
Configuring SAP Web AS ABAP
User Management in SAP Web AS ABAP
Configuring Remote Connections
Patching SAP Web AS ABAP
Scheduling Background Jobs
Monitoring SAP Systems
Technology Components for Browser-based User Interfaces
3. SAP Web AS Java Administration (++)
Java Basics (non-programming topics)
Starting and Stopping SAP Web AS Java
Configuring SAP Web AS Java
User Management in SAP Web AS Java
Patching SAP Web AS Java
Software Logistics for SAP Web AS Java
Monitoring SAP Web AS Java
1. SAP NetWeaver Portal Fundamentals (+++)
The Big Picture
The End-User's Perspective
Technical Infrastructure
Portal Platform Content
Security Aspects
2. SAP NetWeaver Portal System Administration (+++)
User Administration and Authentication
Portal Authorization Concept
Single Sign-On to Backend Systems
Integrating SAP Applications
Solution Management
Secure System Management
Design Modifications and Branding
Advanced Portal Scenarios
3. Configuration of Knowledge Management and Collaboration (++)
Introduction to Knowledge Management
CM Functions and Configuration
KM Technical Infrastructure
Introduction to Collaboration
Virtual Rooms
Real-Time Collaboration
Groupware Integration
TREX Administration
4. Implementation (++)
Installation
Sizing
Implementation and Methodology
Clustering and High Availability
Any help would be highly appreciated.
Regards,
Karthick Eswaran
SAP Netweaver Administrator

Hi,
I am planing to attend this certification without attending any trainings as I have enough experience in SAP Basis and Portal Administration.
But I would like to go through some documents/materials before attending this certification.
If you guys have it kindly share it with me.
Regards,
Karthick

K8N Neo2 boot problems, freezes at testing base and extended memory

I recently bought a motherboard/cpu combo and been having problems. I'll start with my system specs:
MSI K8N Neo 2
AMD 64 3000+ Rev E
XFX Geforce 6600GT
Corsair Valueselect 184-Pin DDR SDRAM Unbuffered DDR 400 , 4 512MB sticks
400W Powersupply
I ordered a mother/cpu combo along with other parts to build a new computer. Finally everything arrived a couple days ago and I started building. First I installed the mb, cpu, ram and vid card to make sure everything was working. When I started it up I got nothing. So I started messing around and dropped the ram down to only one stick and used the D-Bracket. I figured out the cpu had been dislodged during shipping, got it installed again and was able to boot up could get into the bios etc. I put back in my other three sticks of ram everything seems to be working. Next I hooked up the hd, cd/dvd etc. Tried to boot up and it freezes after listing the total memory. Looking at the D-Bracket it shows it freezes at Testing Base and Extended Memory. So I unplug everything back down to just cpu, ram and vid card to see if it still works. It freezes again at testing base and extended memory.
At this point I drop the ram back down to one stick. It boots up and I can get into the bios again. So I shut everything off and put back in the rest of the ram. Turn it on and it freezes at the same point. Hmm, drop it back down to one stick and I can make it through to the bios. Now I'm just frustrated and want to see if I can get my other components working and maybe windows installed then I'll come back to figuring this out. So I save and exit the bios, while it's rebooting again it freezes at the Testing base and extended memory.
After playing around with it some more over the past day here is what I've come to see. If I move one stick of ram around I can get past the testing extended memory to get into the bios or up to the point of needing a boot disk etc. If I reset or reboot it from this point it will freeze. If I just leave my computer alone and off for around 30 minutes I can start it up once then it will freeze. Now I'm just confused why it will intially start up as everything is ok but freeze if it resets. Everytime it freezes it will be at the Testing Base and Extended Memory.
Some things I have tried while talking to a friend about the problem is clearing the cmos and also putting in the ram settings in the bios. Neither seems to work. I've done a lot of searching on google and in this forum and haven't seen anyone talk about a problem like this so hopefully I'm not missing anything.
If there's anything else you guys need to know about my setup let me know. I also hope I wrote this all clearly because at this point I'm pretty frustrated.
Thanks!

Ok, newest update.
After clearing the cmos I put in a stick of ram. Everything loaded up ok and I went into the bios and entered the values (2.5-3-3-8) and 2.75V. To my amazement it didnt' lock up after saving and exiting and it made it through to the Disk Boot Failure etc. So I hit the reset button to see if it would go all the way through again and it froze again with D-Bracket LEDs showing the Testing base and extended. I turned off the case with the on off switch in the back and powered up again. It went right through in the past I'd have to wait. So it seemed like things were a little better.
So I put in a second stick of ram and it booted all the way through, tried to reset to see what would happen and it froze. Turned power on and off and it froze not making it anywhere. Tried that a few more times and it would always freeze right away making no progress.
Back down to one stick of ram and it works again where I can go into the bios, save and exit and it'll make it through a full boot up to Disk Boot Failure. Weird thing was once after just hitting the reset button it actually made it all the way through. So it seems to act differently almost everytime.
To me at least there doesn't seem to be a logical way I can think of what the problem could be.

PI Basis and LUWs

Similar Messages

Maybe you are looking for