PI_BASIS component  upgradation

Hi
    We have the requirement of upgrade the PI_BASIS component from 2005_1_700 level 009 to 2006_1_700 level 000 .
What are the pre-requisite and how to upgrade  this?
             Due to low level of PI_BASIS  component we are getting errors in Development.
Best Regards
Srikanth

Thanks Subash,
                                 One more issue, I have found 3 files in  support pack add-on  regarding PI_BASIS 2006_1_700.
i.e 1. installation, 2.upgrade , 3. installation and Upgrade.
Which file I can download ? I would like to upgrade from PI_BASIS 2005 to PI_ BASIS 2006 ?
Thanks
Srikanth

Similar Messages

  • Component upgrade guide

    Hi
    We are planning for upgrade from 4.6c to ECC5. I'm not able to get the "component upgrade guide" from service.sap.com/instguides. Pls let me know the location of this document in sap website.
    I'm looking for ECC6 upgrade document from 4.6c on HP-Unix with oracle database.
    Take Care
    Amarjit

    Dear Amarjit,
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    Hope this helps you. .
    Regards,
    Rakesh

  • DDIC Activation error during SAP_HR component upgrade in ECC 6.0

    Hi All,
    We were upgrading the SAP_HR component in ECC 6.00 to SP 10 (SAPKE60009 - SAPKE60010).Upgrade is failed in DDIC_ACTIVATION step.
    Below is the error message
    Relationship T5FPBS4G-OFFGC for table T5FPBS4GO does not exist
    Message no. MC683
    Diagnosis
    A secondary table for which the foreign key relationship no longer exists was included for an aggregate (view, matchcode, lock object).
    Procedure
    Find out whether the foreign key for the specified field was changed. It might be necessary to adjust the aggregate to the new foreign key definition.
    In table T5FPBS4GO, Field OFFGC is there but Foreign Keys filed is unchecked
    And in table T5FPBS4G there is no field OFFGC.
    Could you please suggest me on this. If any one faced the issue please let me know.
    OS: Windows 2003 Server
    DB: MS SQL
    BASIS and ABAP component on SP15
    There is no information available in Note 822379 - Known problems with Support Packages in SAP NW 7.0 AS ABAP
    Regards
    Preethish,

    Hi,
    Since it is DDIC activation its not possible also to revert. I sincerely suggest you to overcome the problem without deleting the entry in the table. I haved faced the similar kind of issue in my experience and i resolved with the help of abaper. I suggest you to just get a help from abaper and creating the table field and flag the foreign key in the particular table. It will surely resolve your problem.
    Incase if you want to dlete the entry in database table level emans. Use this functional module
    Spam_reset _status in se37 and by forcefully you can delete the entry of the component. adn also please chck in table also pat01 pat02 and pat03..delete manually.
    Hope it will resolve ur problem
    Regadrs
    Vijay kumar G

  • ERP 6.0 component upgrade (NW + Fiori app)

    Dear experts,
    I’m trying to upgrade ERP system with Sum 1.0 SP11 Patch 2 & I’ve already updated tp, r3ta, r3trans, disp+work files in kernel.
    Source System -> Target System (above red line everything is the same)
    In execution phase I’ve got
    sm37 is not helping much.
    XPRASUPG.ELG (files also in attachment to post):
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    XPRA ERRORS and RETURN CODE in SAPR740XPRA90000138.ER1
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNS: Highest tp internal warning was: 0116" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 054 Calling tp IMPND system: &2"ER1" umodes: &3"C9" options: &4"-Dr3up=1 skipxpra -Dmainimp_proc=1 -Dbuffreset=yes", requests&1" "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-XXX13INCTSPLGN 000" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-74018INCTSPLGN 000" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-S4016INCTSPLGN 000" " " " " " "
    A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
    A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
    A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"&2"Could not convert from 4103 codepage to 1100 codep"
    1AETR012XProgram canceled (job "RDDEXECL", number "19202100")
    1AEPU320 See job log"RDDEXECL""19202100""ER1"
    1 ETP111 exit code          : "12"
    >>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
    XPRAs are application reports that run at the end of an upgrade.
    Most XPRA reports have a report documentation that explains what
    the report does and how errors can be corrected.
    Call transaction se38 in the SAP system, enter the report name,
    select 'Documentation' and click the 'Display' button.
    >>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
    I’m not sure which is report name here, when I enter E/CTSPLUG/CTS_PLG_MSG or IMPND I’ve got “Program E/CTSPLUG/CTS_PLG_MSG does not exist” and when I enter job name RDDEXECL it returns “Object documentation reset.” in message box.
    In SAPR740XPRA90000138.ER1
    1 ETP162 EXECUTION OF REPORTS AFTER PUT
    1 ETP101 transport order    : "SAPK740XPRA90000138"
    1 ETP102 system              : "ER1"
    1 ETP108 tp path            : "C:\usr\sap\ER1\DVEBMGS04\exe\tp.EXE"
    1 ETP109 version and release : "380.18.94" "741"
    1 ETP198
    2 EPU126XPost-import methods for change/transport request: "SAPK740XPRA90000138"
    4 EPU111    on the application server: "VICTORIA4"
    2 EPU122XPost-import method "/CTSPLUG/ACT_AFTER_IMP" started for "PLGD" "L", date and time: "20140822192049"
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "CTS_SERVER_ACTIVATION_AI started" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "Input: tarclient is_upgrade: force_plg_import" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "Start of table e071" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK740XPRA90000138 000001R3TRPLGDSAP_CTS_BOOTSTRA" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK740XPRA90000138 000002R3TRPLGDSAP_CTS_SERVER" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK740XPRA90000138 000003R3TRPLGDSAP_CTS_SERVICE" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "End of table e071, start of table e071k" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "End of table e071k" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 040 Performing initial checks
    A2 E/CTSPLUG/CTS_PLG_MSG 026 Starting check of R3trans
    A2 E/CTSPLUG/CTS_PLG_MSG 013 Component "SAP_BASIS" release "740" and patch level "0007" detected from "UPG_GET_COMPONENT_INFO"
    A2 E/CTSPLUG/CTS_PLG_MSG 020 Plugin "SAP_CTS_BOOTSTRAPPER" was found: version "0000000013" timestamp "20130627154150" trkorr "SAPK-XXX13INCTSPLGN"
    A2 E/CTSPLUG/CTS_PLG_MSG 049 Calling tp CREATECOFILE trkorr: "SAPK-XXX13INCTSPLGN" options "-s ER1 tag=spam -Dr3up=1" system " "
    A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe v" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "unicode enabled version" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe finished" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 032 Starting checks of transport tool tp, options: "SKIPXPRA"
    A2 E/CTSPLUG/CTS_PLG_MSG 039 Performing evaluation of plugins
    A2 E/CTSPLUG/CTS_PLG_MSG 013 Component "SAP_BASIS" release "740" and patch level "0007" detected from "UPG_GET_COMPONENT_INFO"
    A2 E/CTSPLUG/CTS_PLG_MSG 020 Plugin "SAP_CTS_BOOTSTRAPPER" was found: version "0000000013" timestamp "20130627154150" trkorr "SAPK-XXX13INCTSPLGN"
    A2 E/CTSPLUG/CTS_PLG_MSG 013 Component "SAP_BASIS" release "740" and patch level "0007" detected from "UPG_GET_COMPONENT_INFO"
    A2 E/CTSPLUG/CTS_PLG_MSG 020 Plugin "SAP_CTS_SERVICE" was found: version "0000000018" timestamp "20140724090939" trkorr "SAPK-74018INCTSPLGN"
    A2 E/CTSPLUG/CTS_PLG_MSG 013 Component "SAP_BASIS" release "740" and patch level "0007" detected from "UPG_GET_COMPONENT_INFO"
    A2 E/CTSPLUG/CTS_PLG_MSG 020 Plugin "SAP_CTS_SERVER" was found: version "0000000016" timestamp "20140213121003" trkorr "SAPK-S4016INCTSPLGN"
    A2 E/CTSPLUG/CTS_PLG_MSG 044 First delivered plugin is on position "1"
    A2 E/CTSPLUG/CTS_PLG_MSG 016 Consistency "c" for plugin name "SAP_CTS_BOOTSTRAPPER" version "0000000013" timestamp "20130627154150"
    A2 E/CTSPLUG/CTS_PLG_MSG 017 Plugin "SAP_CTS_BOOTSTRAPPER" entries in TADIR: "12", expected: "12"
    A2 E/CTSPLUG/CTS_PLG_MSG 016 Consistency "i" for plugin name "SAP_CTS_SERVICE" version "0000000018" timestamp "20140724090939"
    A2 E/CTSPLUG/CTS_PLG_MSG 017 Plugin "SAP_CTS_SERVICE" entries in TADIR: "142", expected: "142"
    A2 E/CTSPLUG/CTS_PLG_MSG 045 First inconsistent plugin is on position "2"
    A2 E/CTSPLUG/CTS_PLG_MSG 046 Remaining subset of plugins to be installed:
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "-" "SAP_CTS_BOOTSTRAPPER 0000000013SAP_BASIS" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "-" "SAP_CTS_SERVICE 0000000018SAP_BASIS" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "-" "SAP_CTS_SERVER 0000000016SAP_BASIS" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 038 Performing the preparation of the activation of CTSPLUG
    A2 E/CTSPLUG/CTS_PLG_MSG 049 Calling tp CREATECOFILE trkorr: "SAPK-XXX13INCTSPLGN" options "-s ER1 tag=spam -Dr3up=1" system " "
    A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe v" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "unicode enabled version" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe finished" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 055 Calling tp ADDTOBUFFER trkorr: "SAPK-XXX13INCTSPLGN" system: "ER1" umodes: "C16" options: "-Dr3up=1 -Dclientcascade=TRUE -Dctc=0"
    A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARN: Option 'CLIENT' ignored for command ADDTOBUF" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "Addtobuffer successful for SAPK-XXX13INCTSPLGN" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "tp returncode summary:" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "TOOLS: Highest return code of single steps was: 0" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNS: Highest tp internal warning was: 0116" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 038 Performing the preparation of the activation of CTSPLUG
    A2 E/CTSPLUG/CTS_PLG_MSG 049 Calling tp CREATECOFILE trkorr: "SAPK-74018INCTSPLGN" options "-s ER1 tag=spam -Dr3up=1" system " "
    A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe v" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "unicode enabled version" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe finished" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 055 Calling tp ADDTOBUFFER trkorr: "SAPK-74018INCTSPLGN" system: "ER1" umodes: "C16" options: "-Dr3up=1 -Dclientcascade=TRUE -Dctc=0"
    A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARN: Option 'CLIENT' ignored for command ADDTOBUF" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "Addtobuffer successful for SAPK-74018INCTSPLGN" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "tp returncode summary:" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "TOOLS: Highest return code of single steps was: 0" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNS: Highest tp internal warning was: 0116" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 038 Performing the preparation of the activation of CTSPLUG
    A2 E/CTSPLUG/CTS_PLG_MSG 049 Calling tp CREATECOFILE trkorr: "SAPK-S4016INCTSPLGN" options "-s ER1 tag=spam -Dr3up=1" system " "
    A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe v" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "unicode enabled version" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "C:\usr\sap\ER1\DVEBMGS04\exe\R3trans.exe finished" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 055 Calling tp ADDTOBUFFER trkorr: "SAPK-S4016INCTSPLGN" system: "ER1" umodes: "C16" options: "-Dr3up=1 -Dclientcascade=TRUE -Dctc=0"
    A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "This is tp version 380.18.94 (release 741, unicode" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNING: clientcascade is set TRUE in C:\SUM_SP11_" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "but your explicit request for client 000" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARN: Option 'CLIENT' ignored for command ADDTOBUF" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "Addtobuffer successful for SAPK-S4016INCTSPLGN" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "standard output from tp and from tools called by t" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "tp returncode summary:" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "TOOLS: Highest return code of single steps was: 0" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "TP:" "WARNS: Highest tp internal warning was: 0116" " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 054 Calling tp IMPND system: &2"ER1" umodes: &3"C9" options: &4"-Dr3up=1 skipxpra -Dmainimp_proc=1 -Dbuffreset=yes", requests&1" "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-XXX13INCTSPLGN 000" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-74018INCTSPLGN 000" " " " " " "
    A2 E/CTSPLUG/CTS_PLG_MSG 036 "SAPK-S4016INCTSPLGN 000" " " " " " "
    A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
    A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
    A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"&2"Could not convert from 4103 codepage to 1100 codep"
    1AETR012XProgram canceled (job "RDDEXECL", number "19202100")
    1AEPU320 See job log"RDDEXECL""19202100""ER1"
    1 ETP162 EXECUTION OF REPORTS AFTER PUT
    1 ETP110 end date and time  : "20140822194328"
    1 ETP111 exit code          : "12"
    1 ETP199 ######################################
    4 EPU202XEND OF SECTION BEING ANALYZED END OF XPRAS_AIMMRG =================================================
    In SAPG-XXX13INCTSPLGN.ER1
    1 ETP199 ######################################
    4 EPU202X====MARK ANALYZED SECTION==== END OF XPRAS_AIMMRG ============ BEGIN OF XPRAS_AIMMRG ==============
    1 ETP199X######################################
    1 ETP156 GENERATION - SYNTAX CHECK - PACKAGE CHECK
    1 ETP101 transport order    : "SAPK-XXX13INCTSPLGN"
    1 ETP102 system              : "ER1"
    1 ETP108 tp path            : "tp"
    1 ETP109 version and release : "380.18.94" "741"
    1 ETP198
    1 EPU141 Generation of programs and screens for transport request "SAPK-XXX13INCTSPLGN"
    4 EPU142      on application server "VICTORIA4"
    1 EPU143 Only generates programs with LOAD versions
    1 EPU145 Start on "22.08.14" at "19:37:13"
    1 EPU144 -------------------------------------------------------------------------
    2 EPU146XGeneration of the transported programs
    2 EPU144 -------------------------------------------------------------------------
    3 EPU165 Program "SAPLSCXP" successfully generated
    4 EPU153 Database COMMIT executed
    3WEPU156 Program "SAPLTMSSCXP" does not exist
    3WEPU156 Program "SAPLTMS_SCXP" does not exist
    2 EPU144 -------------------------------------------------------------------------
    2 EPU147XGeneration of the users of the transported Includes
    2 EPU144 -------------------------------------------------------------------------
    2 EPU144 -------------------------------------------------------------------------
    1 EPU149 Ended on "22.08.14" at "19:37:26"
    1 EPU150 No. of programs  /Min/Avg/Max (sec): "1"  "3" "3" "3"
    1 EPU144 -------------------------------------------------------------------------
    4 EPU153 Database COMMIT executed
    1 ETP156 GENERATION - SYNTAX CHECK - PACKAGE CHECK
    1 ETP110 end date and time  : "20140822193726"
    1 ETP111 exit code          : "4"
    1 ETP199 ######################################
    4 EPU202XEND OF SECTION BEING ANALYZED END OF XPRAS_AIMMRG =================================================
    I found that also in SAPG-S4016INCTSPLGN.ER1  two programs does not exist
    3WEPU156 Program "IF_CTS_API_TRANSPORT_COLLECTIOIP" does not exist
    3WEPU156 Program "IF_CTS_API_TRANSPORT_REQUEST==IP" does not exist
    Could someone tell me what those programs was supposed to do?
    Thanks in advance
    Ireneusz Kozłowski

    Dear Ireneusz,
    please understand that such workaround - skipping the installation of a package - is not supported by SAP Support.
    The log you mentioned had warnings only, not errors. The real problem can be seen here:
    A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
    A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "
    A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"&2"Could not convert from 4103 codepage to 1100 codep"
    1AETR012XProgram canceled (job "RDDEXECL", number "19202100")
    1AEPU320 See job log"RDDEXECL""19202100""ER1"
    You have to check the job RDDEXECL details in SM37 to find the work process it was run on; then you should go to ST11 and check the corresponding dev_w* file to find the root cause of this issue.
    I'm posting this reply for the community to be aware that skipping errors during XPRAS - or any other upgrade phase - is not the solution.
    Best regards,
    Tomas Black

  • QT7 and MPEG2 playback component - upgrade or purchase?

    I upgraded to QT 7 but now I can't play back MPEG2. Is there an upgrade for the MPEG2 playback component or do I have to purchase a new copy?

    If you moved up from version 6 then yes and you can get a free upgrade.
    Log in at the Apple Store using the same account ID as your original purchase and click the downloadable software purchase link to see.

  • SEM-BW component Upgrade to Level 4

    Hi,
    We are in SAP_BW release 701 Level 3. We are upgrading SEM-BW component from 604 level 2 to Level 4.
    Do SAP_BW has to be upgraded to Level 4 too??
    What are the pros and Cons of Upgrading to SEM-BW 604 level 4?
    Regards
    Rob

    Hi,
    Elements will be adjusted after the upgrade.
    As you already on 7.0. so dtp and transformations will be the same. some 7.4 relates functions will be enabled.
    To know the more information about upgrade to 7.4, please check on Google you may get discussed threads or sap notes.BW 7.4
    Thanks

  • Shared component upgrade

    Hi all,
    We have 2 JES2005Q1 Access Managers (in session failover mode).
    We want to update the plataforms to the latest patch level, but maintaining the actual product version (JES2005Q1)
    Can we safely install the latest JES ES Component Patch Cluster on this platforms ? If yes, will we upgrade the shared components by doing this installation? To what level? JES2005Q4 Shared Components ?
    Thanks in advance.
    Regards,
    Rui Monteiro

    The "Java ES Component Patch" clusters available on Sunsolve are meant to be
    used by Java ES 2 (2004Q2) and Java ES 3 (2005Q1) users that are upgrading to
    Java ES 4 (2005Q4). It essentially upgrades the shared components to the
    Java ES 4 (2005Q4) level (and adds a couple new ones in the "genesis" patches).
    I think you want to get the "latest patches for JES 3". Unfortunately there is no
    simple way to do that (there is with JES 5 where accumulated patch clusters are
    now available). My recommendation would be to install the latest recommended
    Solaris patch cluster (this may end up patching a few JES shared components
    since they are bundled with Solaris as well). You'll then have to search for patch updates for the particular product versions you use (AppServer, AccessManager, etc).
    Applying the "Java ES Component Patch" cluster to a JES 3 system and not
    upgrading to JES4 may work -- but I'm not sure how much that scenario was tested
    so I hesitate to recommend it.
    Joe

  • SAP HR component upgrade

    Hi Friends,
    We have SAP_HR 600 SP18 level 58 and same EA_HR.
    We want to upgrade it to SAP_HR 602 and EA_HR602. We ahve tried it on service market place but not getting.
    Please send the link from where we can download the same.
    Regards
    Ganesh Datt Tiwari

    > We have SAP_HR 600 SP18 level 58 and same EA_HR.
    > We want to upgrade it to SAP_HR 602 and EA_HR602. We ahve tried it on service market place but not getting.
    > Please send the link from where we can download the same.
    Components of 602 are Enhancement packs which has to be downloaded and confirmed through Solution Manager. They are no more directly downloadable from the SMP.
    Markus

  • RE: CRM or any component upgrade

    Hello all,
    recently we upgraded our CRM7.o to a new SP. after the upgrade i ran SU25 and completed all the steps. i haven't seen any major changes in our custom roles. so i changed some roles based on step 2c then regerated all the custom roles and created a transport of customer tables. i have few questions in my mind after doing that.
    Q1) once the customer tables are transported to QA will the roles automatically gets regenrated and be identical to the ones in DEV.
    Q2) one user did some testing and came with an error saying he is missing some authorization after upgrade, i ran trace and saw a object which is not in our role design, but the object is in SAP_ALL? i clicked on where used and it did not showed any transactions. how can we know if this object exist prior to upgrade or after upgrade.
    Q3)what is the purpose or when we should regenerate SAP_ALL? is it necessary to regenrate SAP_ALL after upgrade.
    Thanks a lot in Advance,
    SS
    Edited by: sun on Jun 15, 2010 4:48 PM

    Sun,
    Q1) once the customer tables are transported to QA will the roles automatically gets regenrated and be identical to the ones in DEV.
    If you transport the customer tables your upgraded roles need to be transported as well.
    While transporting the roles,you will get the message that auth profiles are also transported, just you need to do user comparssion.
    Identical to dev : if both the systems are same then roles are identical . (i.e maintaing same su24 values,if you have deactivated any objects in dev,same should be in QA .
    Q2) one user did some testing and came with an error saying he is missing some authorization after upgrade, i ran trace and saw a object which is not in our role design, but the object is in SAP_ALL? i clicked on where used and it did not showed any transactions. how can we know if this object exist prior to upgrade or after upgrade.
    In old system  object was not present, but in new system it might have got added.
    In su25 itself it will be shown what are the new tcode & auth objects .
    how can we know if this object exist prior to upgrade or after upgrade.
    based on the transaction &  objects maintained for it.
    Q3)what is the purpose or when we should regenerate SAP_ALL? is it necessary to regenrate SAP_ALL after upgrade.
    if you want to add any new auth object to SAP_ALL,then you can do it . Su21 -> re generate SAP_ALL.
    is it necessary to regenrate SAP_ALL after upgrade
    When new objects are added to the pre-upgrade SAP_ALL, it needs to be regenerated: the system first deletes the authorizations of SAP_ALL to regenerate it with all the new ones. However, as RSUSR406 contains authority-checks, you should ensure that you have only a PFCG role authorized for profile generation and not only SAP_ALL when doing this, or alternately use report AGR_REGENERATE_SAP_ALL.
    - Transport an object to the system. During import, the system will automatically regenerate SAP_ALL, unless SAP note 439753 is applied (Bernhard recently mentioned that in another thread).
    - Implement SAP note 1064621 from a different client.
    Thanks,
    sri
    Thanks a lot in Advance,
    SS

  • CS5.5 component upgrade problems

    I installed Master Suite CS5.5 a couple of weeks ago, and all programs I opened worked fine.  The one thing I used immediately was Acrobat X Pro to edit .pdf forms and save them.  Thnking it would be a good thing, In Acrobat X Pro, I used the "Check for Updates ..." menu item (under "Help") to find any updates.  It found a bunch of updates for all of the Master Suite programs, and I installed them.  Well, that caused a bunch of problems with Flash and Acrobat X Pro.  Attempts at editing .pdf forms caused Windows 7 to freeze.  I think that CS5.5 might have issues if a newer version of Flash is installed (than came with the software). 
    My PC suffered hard shutdowns and bad startups (hanging) ensued.  Several times I had to revert to earlier restore points to start up my system.  Ultimately I did an uninstall and reinstall - using the Adobe CS5.5 Cleaner Tool - and all seems well again.
    My question is, what happened with the updates, and do I reject future updates altogether?  I 'm using Google Chrome for my browser, and I deactivated the automatic Flash updates it performs.
    Thanks

    No error messages at all.  Just a PC freeze up and then several reboot issues until going back to a restore point.
    After my reinstall of the master suite I have one message from Support Advisor at every startup.  It's a"licensing program" error "cpsid_83578r3: Error, "Validate license at Pre-chrome" when installing - Creative Suite 5."  I searched for that issue description, and I will see if I can get rid of it.  Right now, I don't know if that will cause me any issues down the road.
    UPDATE
    After reading a few posts here re the cpsid error and the particular products that had problems, I tried opening Adobe InDesign.  The software opened, but it was unresponsive to any user commands (mouse clicks).  My PC locked up for 30 seconds or so before I got mouse control back.  I could not shut down the PC and ctrl-alt-delete then shutdown did not work.  I finally performed a hard shutdown by using the on/off switch.  I have yet to start the syatem up after that.
    After my master suite re-install, I openbed all programs in the suite - including InDesign - and none of  them caused any problems like lock-ups or freezing.  I am uncertain as to why InDesign caused a problem since then.

  • Component Upgrades Yoga 13

    I'm planning on adding ram and an ssd to my Yoga 13.  Can someone who has actually done this tell me the proper way to remove and reinstall the keyboard?  I took a peek and it's got a bunch of metal snags and plastic clips + the ribbon.  Any information is much appreciated. 
    Solved!
    Go to Solution.

    Hello and welcome,
    The Hardware Maintenance Manual is probably your best bet: IdeaPad Yoga13 Hardware Maintenance Manual
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • PI 7.1 upgrade - PI_BASIS patch level in ECC

    Hello
    We are looking at upgrading our XI 7.0 SP12 to PI 7.1. Our backend ECC system is at PI_BASIS SP11. Most of our interfaces with the backend are through ABAP proxies.
    Will an upgrade to PI 7.1 demand an upgrade to PI_BASIS in the backend ECC system as well?
    If not, what is the minimum SP level the PI_BASIS component in the backend ECC system should be at?
    I don't find this information in upgrade guide; where will this information be normally available?
    Thanks
    KK

    You can use PI 7.1 with any SAP system.
    However, if you want to use Abap proxies based on message interfaces of type "stateless" with WS-RM protocol, the ECC requires SP 14.
    The Abap proxies based on XI 3.0 protocol do not require any special patch level.
    Regards
    Stefan
    Edited by: Stefan Grube on Aug 28, 2008 4:34 PM

  • SSIS 2014 Custom Component: "The component metadata could not be upgraded to the newer version of the component."

    I recently upgraded my set of custom data flow components to use the SQL 2014 SDK as we are upgrading to SQL Server 2014 RTM.  The only change I made to my custom components was to change the references to the following DLLs from version 11.0 to version
    12.0:
    Microsoft.SqlServer.DTSPipelineWrap
    Microsoft.SQLServer.DTSRuntimeWrap
    Microsoft.SQLServer.ManagedDTS
    Microsoft.SqlServer.PipelineHost
    After rebuilding my assembly, adding it to the GAC, and placing it in the appropriate directory structure (the 120\DTS\PipelineComponents directory for both the x86 and x64 versions), my components no longer display in the SSIS toolbox in SSDT.  In
    addition, whether loading up my packages in SSDT or executing them via the SSIS catalog (in SQL 2014), I get the series of error messages below.  I do have a PerformUpgrade method implemented in my packages that has worked successfully through previous
    component upgrades.  I also found this seemingly relevant thread (Custom
    SSIS Connection Manager error message in SSIS 2014 (RTM): The connection manager '' is not properly installed on this computer.) and tried modifying the extensions.xml script, but I was unsuccessful with this approach (though I could have done so
    incorrectly).
    Validation error. DFT Process Changes: DFT Process Changes: The component metadata for "xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF}" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
    Error loading xxx.dtsx: The "xxx" failed to cache the component metadata object and returned error code 0x80131600.
    Error loading xxx.dtsx: Component xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF} failed to initialize due to error 0xC0047067 "The "%1" failed to cache the component metadata object and returned error code 0x%2!8.8X!.".
    Error loading xxx.dtsx: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
    Error loading xxx.dtsx: The component metadata for "xxx" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
    Validation error. DFT Process Changes SSIS.Pipeline: The component metadata for "xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF}" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
    Thanks in advance,
    Ben

    Hi Ben,
    Please also update the reference to the SSIS assembly Microsoft.SqlServer.Dts.Design located in C:\Program Files (x86)\Microsoft SQL Server\120\SDK\Assemblies folder to the version 12.0.0.0. Besides, rename IDTSxxxx110 objects to IDTSxxxx120.
    It may also be the factor that the custom mapping file is not created correctly. You can make a copy of the built-in mapping.xml.sample file, rename its extension to XML, and then edit its <ExtensionMapping> attribute:
    <ExtensionMapping tag="mycustom extension"
    oldAssemblyStrongName="MyCustomAssembly.MyCustomTask, MyCustomAssembly, Version=1.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
    newAssemblyStrongName="MyCustomAssembly.MyCustomTask, MyCustomAssembly, Version=2.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
    Then, we need to upgrade the packages, and SSIS will read all the XML mapping files placed in this directory during upgrade.
    References (although the blogs are written for SSIS 2008 by Matt, we can still refer to them for SSIS 2014):
    http://blogs.msdn.com/b/mattm/archive/2008/02/01/custom-extensions-in-sql-server-2008.aspx 
    http://blogs.msdn.com/b/mattm/archive/2007/06/05/katmai-custom-components-and-upgrade.aspx 
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • SAP BW upgrade problem in phase lang_select

    Hello everybody,
    during our upgrade from SAP BW 3.0B to 3.5 a problem occurred in the phase “lang_select” running PREPARE. Unfortunately we did not find any up-to-date SAP note on this, except  in the note (212481), where the symptom is descried quite well, but the solution does not fit. By the way, the folder-names are already in upper-case (a different note told to do so). So I would be glad if anybody who does have any experience with upgrading from 3.0B could take a look at our problem as described below.
    <u>First of all our system information:</u>
    SAP Kernel 640 PL 115
    OS: IBM AIX 5.2.0
    DB: DB2 V8 FP 10
    actual release of SAP BW: 3.0B
    target release of SAP BW: 3.5 SR1
    R3trans: 6.13 (release 640)
    Tp: 340.16.12 (release 640)
    <u>Problem: PREPARE, phase lang_select</u>
    >> 08:56:19  PREPARE: START OF PHASE LANG_SELECT
    working on /software/51030722/LANG1 ...
    working on /software/51030722/LANG2 ...
    working on /software/51030722/LANG3 ...
    The following language(s) could not be updated yet:
    - German       for component PI_BASIS
    - German       for component SAP_ABA
    - German       for component SAP_BASIS
    - German       for component SAP_BW
    - English      for component PI_BASIS
    - English      for component SAP_ABA
    - English      for component SAP_BASIS
    - English      for component SAP_BW
    Please mount another Language Disk for these language(s).
    You need at least CDs which satisfy the vector "DE"
    (standard languages) for all components.
    It is not allowed to omit this update.
    <u>What we did until the message comes up:</u>
    - all by SAP recommended preparations on the OS, the DB and SAP BW 3.0B have been successfully implemented (as described in Component Upgrade Guide SAP BW 3.5 SR1)
    - we copied all the data from CD/DVD into directories on the server
    - we copied the fix FIX_WEBAS640SR1.SAR into “/usr/sap/put/”, which is required by PREPARE later on (SAP note 663240)
    - start of PREPARE on the command-line (the directory “/usr/sap/put/” is now filled with files and subdirectories are created)
    - overwriting R3trans and Tp with the newest versions (as mentioned at the beginning)
    - executing UaServer on the AIX, accessing the tool via web browser from a client
    - in the applet we start PREPARE
    - making entries for PREPARE
    - lang_select
    We did also examine the logs, here is what they say:
    <b>R3upchk.log</b>
    UPGRADEPHASE LANG_SELECT
    ...started at 20060308085619
    Phase log file: 'LANGSEL.LOG'
    Condition         #if 1 >= 0
    is evaluated as a TRUE expression, total status is TRUE, stack level 1
    ...begin dialogue at 20060308085623
    <b>Langsel.log</b>
    1 ETQ201XEntering upgrade-phase "LANG_SELECT" ("20060308085619")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '10', GwService = 'sapgw10'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_db6_schema=SAP1
    4 ETQ399   auth_shadow_upgrade=0
    4 ETQ380 computing toolpath for request "TP_LANG_SELECT"
    4 ETQ381 request "TP_LANG_SELECT" means "create cofile in phase TP_LANG_SELECT"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETG880 Language data requested for "" (without standard languages "DE")
    4 ETQ359 RFC Login to: System="1", Nr="10", GwHost="sap1", GwService="sapgw10"
    4 ETQ232 RFC Login succeeded
    <b>cdtrace.log</b>
    2006/03/08 08:56:19 Searching for Data Carrier labeled LANGUAGE
                        Adding path: /software/51030783
    2006/03/08 08:56:19 Resolving directory structure below /software/51030783
                        Adding path: /software/51030783/UM1
                        Adding path: /software/51030783/UM2
    2006/03/08 08:56:19 Directory structure below /software/51030783 resolved
    2006/03/08 08:56:19 Working on /software/51030783 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030783/UM1 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030783/UM2 ... no matching label
                        Adding path: /software/51030777
    2006/03/08 08:56:19 Resolving directory structure below /software/51030777
                        Adding path: /software/51030777/UPG1
                        Adding path: /software/51030777/UPG2
                        Adding path: /software/51030777/UPG3
    2006/03/08 08:56:19 Directory structure below /software/51030777 resolved
    2006/03/08 08:56:19 Working on /software/51030777 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030777/UPG1 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030777/UPG2 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030777/UPG3 ... no matching label
                        Adding path: /software/51030630
    2006/03/08 08:56:19 Working on /software/51030630 ... no matching label
                        Adding path: /software/51030722
    2006/03/08 08:56:19 Resolving directory structure below /software/51030722
                        Adding path: /software/51030722/LANG1
                        Adding path: /software/51030722/LANG2
                        Adding path: /software/51030722/LANG3
    2006/03/08 08:56:19 Directory structure below /software/51030722 resolved
    2006/03/08 08:56:19 Working on /software/51030722 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030722/LANG1 ... matches -> added to result list.
    2006/03/08 08:56:19 Working on /software/51030722/LANG2 ... matches -> added to result list.
    2006/03/08 08:56:19 Working on /software/51030722/LANG3 ... matches -> added to result list.
                        Adding path: /software/51030769
    2006/03/08 08:56:19 Resolving directory structure below /software/51030769
                        Adding path: /software/51030769/K01
                        Adding path: /software/51030769/K02
                        Adding path: /software/51030769/K03
                        Adding path: /software/51030769/K04
                        Adding path: /software/51030769/K05
                        Adding path: /software/51030769/K06
                        Adding path: /software/51030769/K07
                        Adding path: /software/51030769/K08
    2006/03/08 08:56:19 Directory structure below /software/51030769 resolved
    2006/03/08 08:56:19 Working on /software/51030769 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030769/K01 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030769/K02 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030769/K03 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030769/K04 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030769/K05 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030769/K06 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030769/K07 ... no matching label
    2006/03/08 08:56:19 Working on /software/51030769/K08 ... no matching label
                        Adding path: /software/51030865
    2006/03/08 08:56:19 Working on /software/51030865 ... no matching label
    Well, we actually do not know what the problem is. It seems to us that the program is not able to identify the language source files. The point is why did the source-paths for the other data work, as we copied the CD/DVD-data into folders? What is different with the language-CD?
    Thanks a lot for your help,
    Peter

    I had the same problem but for upgrading SAP SOLUTION MANAGER 3.2 to 4.0 in the PREPARE PHASE "LANG_SELECT"
    In the PEVALLAN.<SAPSID> ,I realized that the path for the required DVD I entered was too long !!
    My real path was "C:\SAP_CDS\Upgrade_SOL4\51031485\51031485_1\SAP_CRM_LNG"
    and the PEVALLAN FILE in the IV_LANGDIR parameter it was
    ""C:\SAP_CDS\Upgrade_SOL4\51031485\51031485_1\SAP_CR"
    I've just shortened the path and it works now.
    This surprised me because from the beginning of the PREPARE phase, I had no problems with that kind of thing.

  • BW Upgradation Project from BW 3.5 t o BI 7.0

    Dear SDNS,
                             We got an requirement to do an upgradation project for BW 3.5 to BI 7.0... This is the first time am involving for Upgradation..Am An BW Technical Consultant.. Can anyone one sugggest at scratch level wat are the roles should play by BW Technical consultant.. And Wat are the activities whould done by BW technical consultant.. An can anyone tell me.. How many SAP Consultants should involve in this Project.. i.e like how many Basis Consultants and how many ABAP Consultants should involve.. Who plays the Vital Role for Upgradation...
    Can anyone send me the Documents Related for BIW Upgradation for BW 3.5 to BI 7.0.. If anyone send me screen shots related to BW Tehcnical Consultant work it would be helpful.....
    My E-Mail - [email protected]
    Answering Getz Appreciated,
    Thanks & Regards,
    Aluri

    Hi
    I have some checklist ,do not exactly remember from where i got it but its really usefull
    There is no standard SAP checklist as it used to exist in 3.x for nw2004s upgrade and trust the master data guide available on market place is not upto the mark and expectations
    So Heads up..
    /message/2979584#2979584 [original link is broken]
    /message/2765713#2765713 [original link is broken]
    /message/2979576#2979576 [original link is broken]
    /message/3214476#3214476 [original link is broken]
    /message/3024448#3024448 [original link is broken]
    You may wish to have a look at draft portrayed below,rest you learn when you drive
    Lessons Learnt - Upgrade
    1)Convert Data Classes of InfoCubes. Set up a new data class as described in SAP OSS Note 46272.
    2)Pay attention to the naming convention. Execute the RSDG_DATCLS_ASSIGN report.
    3)Run the report RSUPGRCHECK to activate objects.
    4)Upgrading ABAP and JAVA in parallel may cause issues. If there is no custom development on J2EE instance, it is recommended to drop the J2EE instance and re-install the latest J2EE instance after the upgrade.
    5)Apply SAP OSS Note 917999 if you include the Support Patch 6 with the upgrade or you will get the error at PARCONV_UPG phase. When you upgrade to a product containing Basis 700, the phase PARCONV_UPG terminates. You included Basis Support Packages up to package level 6 (SAPKB70006) in the upgrade. The job RDDGENBB_n terminates with the error RAISE_EXCEPTION. In addition to this, the syslog contains the short dump TSV_TNEW_PAGE_ALLOC_FAILED. The program SDB2FORA terminates in the statement "LOOP AT stmt_tab". An endless loop occurs when the system creates the database table QCM8TATOPGA.
    6)Apply the OSS note 917999 if you get the following error during PARCONV_UPG phase: PARCONV_UPG terminates with TSV_TNEW_PAGE_ALLOG_FAILED
    Critical OSS Notes:
    819655 – Add. Info: Upgrade to SAP NW 2004s ABAP Oracle
    820062 - Oracle Database 10g: Patchsets/Patches for 10.1.0
    839574 – Oracle database 10g: Stopping the CSS services ocssd.bin
    830576 – Parameter recommendations for Oracle 10g
    868681 – Oracle Database 10g: Database Release Check
    836517 – Oracle Database 10g: Environment for SAP Upgrade
    853507 – Usage Type BI for SAP Netwaevers 2004s
    847019 - BI_CONT 7.02: Installation and Upgrade Information
    818322 – Add. Info: Upgrade to SAP NW 2004s ABAP
    813658 - Repairs for upgrades to products based on SAP NW 2004s AS
    855382 – Upgrade to SAP SEM 6.0
    852008 – Release restrictions for SAP Netweaver 2004s
    884678 - System info shows older release than the deployed one
    558197 – Upgrade hangs in PARCONV_UPG
    632429 – The upgrade strategy for the add-on BI_CONT
    632429 - The upgrade strategy for the add-on FINBASIS
    570810 - The upgrade strategy for the add-on PI_BASIS
    632429 - The upgrade strategy for the add-on SEM-BW
    069455 - The upgrade strategy for the add-on ST-A/PI
    606041 - The upgrade strategy for the add-on ST-PI
    632429 - The upgrade strategy for the add-on WP-PI
    Post upgrade Steps :-
    1. Read the Post Installation Steps documented in BW Component Upgrade Guide
    2. Apply the following SAP OSS Notes
    47019 - BI_CONT 7.02: Installation and Upgrade
    558197 - upgrade hangs in PARCONV_UPG, XPRAS_UPG, SHADOW_IMPORT_UPG2
    836517 – Oracle Database 10g: Environment for SAP Upgrade
    3. Install the J2EE instance as Add-in to ABAP for BI 7.0 and apply the Support Patch that equivalent to ABAP Support Patch.
    4. Run SGEN to recompile programs.
    5. Install the Kernel Patch.
    6. Missing Variants - (also part of test script)
    look at the RSRVARIANT table in SE16. If it is empty, then you will definitely need to run RSR_VARIANT_XPRA
    program - RSR_VARINT_XPRA
    OSS -953346 and 960206 1003481
    7. Trouble Shootauthorizations
    820183 - New authorization concept in BI
    I think the above material is sufficient but in case you face any issues feel free to revert back
    Reward suiatble points

Maybe you are looking for

  • Making the best quality DVD from FCP

    Can anyone suggest how to make the highest quality DVD from an HDV FCP project?

  • Check inputfield for numbers

    I have an input field and I want to check the value, if there are only numbers in it. When not, there must come an error message or something like this and the user must change the entry. I made the input field, with the following coding:     <htmlb:

  • Applications quit unexpectedly on my iPad1.

    Recently, applications on my iPad have begun to spontaneously quit, or fail to start properly. This affects both downloaded apps (games, newspapers, Evernote) as well as basic apps like email and calendar. I have tried a hard reset, top no avail. Has

  • How to set iPod Classic to NOT automatically update?

    After dealing with the debacle of iTunes 11 on my Windows 7 PC for a month I made the move and rolled back to version 10.7, and am once again able to use iTunes the way I want to, with ease and efficiency. One concern I have is that when I connect my

  • Can't transfer purchased music from itunes to ipad

    I can't transfer purchased music from itunes to ipad 3 "because file could not be converted".