PI characteristics in Master Recipe

Hi,
I would like to update the Process Instruction characteristics in a Master Recipe using Change Master (CC01) via BDC.Now when there is a change in one of the PI characteristics, my program updates the PI characteristics in the Master Recipe via BDC by creating a new Change Master, but in case the user again runs the same program after updating the PI characterestics using a different Change Master, all the the relevant rows are getting disabled, thereby not making it possible to either enter or modify any values in future.
Could you please let me know why this happens and how to over ride this problem ??
Thanks in Advance.
Lakshmi.

Raju Garu,
In C201 or C202 select the Phase for which you wanted to have QM, then press CtrlShiftF2 or from Menu Goto->Quality Planning->Inspection Characteristics, here you need to assign the MIC. You a control key relavant for QM in this phase.
Regards,
Prasobh

Similar Messages

Report for Master Recipe

Hi All;
Is there any report apart from C251 which would give the deatils of the Master Recipe or to be more specific we need to download the Inspection characteristics from the Master Recipe.
Regards

Hi Lucky 121,
Please try and check table PLKO whether it meets ur requirement.
Regards
Suri

PI charactersitics in Master Recipe gets disabled.

Hi,
I would like to update the Process Instruction characteristics in a Master Recipe using Change Master (CC01) via BDC.Now when there is a change in one of the PI characteristics, my program updates the PI characteristics in the Master Recipe via BDC by creating a new Change Master, but in case the user again runs the same program after updating the PI characterestics using a different Change Master, all the the relevant rows are getting disabled, thereby not making it possible to either enter or modify any values in future.
Could you please let me know why this happens and how to over ride this problem ??
Thanks in Advance.
Lakshmi.

Hi
To activate ECN for Master recipe u need to set the Following
1) In OPN0 - Default values for Master recipe choose the Profile with which u want to create the Master recipe and Click on details > In the Change Parameters at bottom select "with Change Number" for Change Rule and SAVE
2) In OP5A - Select the Screen Group PP/PI/QM task lists: header screens and tick *Req * for the field Change Number (PLKOD-AENNR) and SAVE
Now when u Creating New Master recipe system will give Error if no change no assigned
Pl refer the link for more details
[http://help.sap.com/saphelp_dimp50/helpdata/en/89/a4200b461e11d182b50000e829fbfe/content.htm]
Regards
Brahmaji

Master Recipe tables

Hi all,
I want to know the Master Recipe tables. Please if anybody can speify Master Recipe tables, will be very much needed & hence helpful to me.
Regards,
MHP

CPC_CMX_DB_COR                 Master Recipe: Context Table for Recipe He
CPC_CMX_DB_COS                 Master Recipe: Context Table for Recipe Op
CPC_CMX_DB_LOG                 XSteps: Change Log
CPS_PRES                       Process Management - Values for Flag in Cu
CPS_PREST                      Text Table zu CPS_PRES
KALC                           Article Quantity Calculation - Formulas
KALT                           Article Quantity Calculation: Header
PLFT                           Process Instructions
PLFV                           PI Characteristics/Sub-Operation Parameter
PLKO Header data
PLPO Item data
RESB and MAPL
sree
Edited by: sree gowda on Jan 19, 2009 6:54 AM

Dymanic Master Recipe

Hi Gurus,
I have a requirement for are Product with two different concentration value.
Say for example: Product A with 10 ml and Product A with 30 ml.
There are couple of difference between 10 and 30 ml.
1) BOM only one component is changed(based on 10 and 30 ml)
2) Based on 10 and 30 ml only one Process Instruction gets changed. (Based on Standard Operating procedure).
I don't want to create another Recipe/Recipe group as just only one Instruction and only one BOM Component gets changed.
Is there anyways I can make my recipe common for both 10 and 30 ml and dynamic based on the ml value?
I was thinking similar to Variant configuration (Super BOM and Routing). Is there any concept like this to achieve the same in Master Recipe.
Thanks in advance for all your reply/response.
Regards,
Shyam

Hello Shyam
There is a functionality of process orders called Material Quantity Calculation.
With MCQ the component quantity may vary according to the batch characteristics. Take a look on the following link for more details:
Material Quantity Calculation - Production Planning - Process Industries (PP-PI) - SAP Library
Material Quantity Calculation - Production Planning - Process Industries (PP-PI) - SAP Library
Unfortunately, it is not possible to make any change to the operations/phases.
BR
Caetano

Master recipes operations not getting transfered in SNP PDS to APO from R3

Hello APO Gurus,
I am trying to transfer SNP PDS for master receipes from R3 to APO.
Issue description::
The operation is not getting transfered correctly , some system default operation "010 generated Operation (from Planned Delive)" is getting generated in APO, also activity and resource capacity is not getting transfered. This situation exist for one plant 1000, for other plant 1100 the SNP PDS created correctly.
i have following points:
1. Is there some customizing setting missing on R3 or APO side for plant 1000 tbefore SNP PDS transfer
2. What need to be checked on master recipes data in R3,
i have checked on below points
1. FG Materials and all the Component Material to be in APO in a Active Integration Model.
2. BOM & Routing and Production Version setup correctly.
3. The Routing Operations have to Relevant to 'SCHEDULING'.
4. Try deleting the existing Integration model for materials & re-create new IM & activate.
Please help me to send SNP PDS correctly to APO to take heuristic run.
Regards
Gajendra
Edited by: Gajendra_APO on Aug 23, 2011 1:14 PM

Hi,
It is good that you have given your already checked points.
Please check the following things also and try to retransfer the PDS.
1. Check your resource in ECC, whether you have maintained the Process formula.
2. Check you have maintained some values in Master Recipe for processing time
3. Check whether the resource has been transferred for your plant 1000 to APO and an active IM exists.
4. Also check the type of the resource transferred to APO. It should be a single-mixed/ multi-mixed or bucket resource.
Hope this will help you to solve the issue.
Regards,
Manimaran M.

Master Recipe without material

Dear PP Gurus,
I have one query.
I want to create master recipe without material, i have created the same.
Now while creating process order it is giving error,
BOM for material 500000010 does not contain any valid items
Message no. CO636
please guide
thanks in advance
kailash thakkar

Hi Kailash,
What is mean by
I want to create master recipe without material, i have created the same.
What's the reason behind it.
Regarding error CO636,
- Check your BOM of that 500000010 might be components are missing over here.
or
- might be From to To lot size of BOM is not match with your Process order qty.
or
- Also check Valid From to To Date of your BOM.
Regards,
Dhaval

Error while changing the master recipe (C202)

In transaction C202 (Material master recipe), I am trying to make a change but getting error message :Update was terminated.
I am trying to change a master recipe which contains an error. Recipe: A61234 transaction C202.
Thanks.

Hope, By this time you must have resolved this issue at your end. Due you know any root cause, If yes, could you please share it with us.

Do you know the idoc for master recipe?

Hi all.
Do you know the idoc for maintain master recipe?
I am looking for the idoc.
I would like to create, update and delete master recipe with idoc.
I have investigated about idoc,but can't find suitable idoc.
(I did find it for BOM, but for recipe is nothing.)
Thank you in advance..
Satoru

Hello,
As far as I can see there are no BAPI's or IDOC's available to upload Master Recipe data.
A suggestion would be to use the batch input technique to upload the master recipe master data. You find the documentation of the batch input recorder etc. via the menu path System -> Services -> Batch input -> Recorder
I hope it helps,
Regards,
Marcelo

Mass creation of BOM and Master Recipe for Plants

My client wants to do Mass BOM creation and Mass Master Recipe Creation from a Generic BOM and Generic Master Recipe for all 10 Plants by just a click of button.
He does not want to use copy function using CSO1 or C201, and do for plants 'one by one'. He finds it very time-consuming. He wants to copy for all ten plants all at once. Please advice how this can be accomplished in the best possible manner, and if by standard SAP.
Thanks,
Sac

Dear Sir ,
What is LSMW ?
I want to Copy some bill of material from another plant .I had used T code CS01 for it but only the header bill of material is copied .
The copy field in CS01 is only for first level boms the subsequent Boms are not copied .
so is there any other way to do it ? if possible please give the detail procedure .
Regards
Pankaj .
Edited by: pankaj.001 on Mar 9, 2011 10:55 AM

Creation of Process Order without assigning master recipe

Hi,
I want to create a process order without having default master recipe for the given material or default operation for the given order type. I want the user to select the master recipe manually in process order. We do not want to use production version also.
We can define the default operation for the order type (OPJG) so that we can create a process order. I do not want a default operation in the process order but the user should select a valid master recipe. If we have default operation in the process order, it serves no purpose as it is never used anywhere.
Is there any way we can achieve this?
Regards,

Hi,
Please find the required details and conditions for creating process orders without master recipe.
http://help.sap.com/saphelp_47x200/helpdata/en/89/a42cb3461e11d182b50000e829fbfe/frameset.htm
Regards
Kannan

In LSMW which method is exactly suits for Master Recipe Creation (TC-C201)

Hi All,
I am unable to find which method suits for Master Recipe Creation in LSMW.
Please send me in detail if any method suits.
Can any body help me in this.
Points will be awarded for correct answer which helps me come out of this problem.
Regards,
Shobha

Hi shobha,
if there is code u have to do before uploading go for BDC or BAPI,
it not go for LSMW (recording method) --> in this its very difficult to code.
Thanks

Deleting operations in master recipe of process orders

Dear Guru's,
I want to delete the operations in master recipe of process orders. The operation numbers are different in different process orders. This activity has to be performed on bit large number of process orders. Can anyone help me in providing the process for doing this activity in mass. Any suggestions?
Thanks in advance.
Regards
Kalyan

Dear Kalyan,
Why do you want to delete the operations(basically phases)at process order level?
If it's really required to execute the Shop floor activties and if the order numbers is huge in number means then in my
understanding only a LSMW/BDC can help you,but technically I'm concerned about selecting the operation/phases for deletion
by passing on the confirmation number or operation number for a particular process order.
If it would be the latest operation/phase for a product means then make the changes in the master recipe so that the same is
getting copied into the process orders in the future.
Check and correct me if I'm wrong.
Regards
Mangalraj.S

Master recipe Batch-input / Bapi / Fct

Hi,
Does anybody have a program to insert data for master recipe ?
I didn't understand how to use fct MRTRS300_MASTER_RECIPE_SAVE and the Batch-input on C201 have oss note ...
Rgd
Frédéric

Frédéric,
I tackle the same question, I will let you know when I find something. Please post your findings here as well.
Regards,
Serge

Material Assignment in Master recipe

Hi,
Is there any FM/BAPI to assign material into a master recipe? Currently, we are using BDC to call C202 transaction for this purpose. This process takes long time for material assignment which leads to performance issue.
Thanks in advance
Senthil Kumar A

In LSMW , object BUS1012 is offered for routing creation and change .
Unfortunately there is no object for master recipe creation & change and there is no standard batch input, nor BAPI/IDOC, nor direct input. You should create your own batch input or CATT.
Here is a possible procedure:
Please record a Batch-Input with transaction SHDB and try if this work. If not please try with TOFF as described in the notes.
Read carefully SAP note 142022.

PI characteristics in Master Recipe

Similar Messages

Maybe you are looking for