PI: configuration for PO and Contracts creation on ECC

Dear Gurues,
My client is working with classic scenario with plan driven procurement on SRM 7 EHP1 and ECC 6 EHP5.
From ECC EHP4 or higher landscape, classic PO will be created in the backend, from SRM only via XML. For this, PI system should be configured and SRM system connections and the SRM & ECC business systems have to be mentioned in the PI system.  So the use of PI is mandatory.
Can you explain me which configuration shoudl I have to perform in SRM-ECC and PI?
Thanks in advance.
Martí

I do not think anything is mandatory regarding the order. You can go ahead with PI 7.1 first and then EHP4 on ECC. But the otherway should also not be a problem.
VJ

Similar Messages

  • Business Flows for Sales and Contracts process

    Hi,
    I needs Business Flows for sales and contracts process for my project.
    Does anybody knows where i can find these BFA ?
    Thanks
    Regards
    Mehdi

    Hi mehdi;
    Please check below and see its helpful:
    R12 Responsibilities And Roles Based On Business Flows [ID 406401.1]
    Regard
    Helios

  • I will be buying the new IMac 27 inch in December. Would like input on the best configuration for photographic and possibly video processing-dream machine!

    I will be buying an IMac 27 inch in December. What is the best configuration for photo and possibly video processing.Does one need a Mac Pro? Dream machine!

    Just to explain what I just wrote to Laundry Bleach:
    Why is there no iDVD on my new Mac?
    https://discussions.apple.com/docs/DOC-3673
    UPDATE & ADDENDUM:
    But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
    Poster jhb21939 posted this in another thread:
    “when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
    I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
    In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
    In response, Old Toad posted this solution:
    “You can still use it one all of your Macs.  If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer.  After you're done reset the time back to the correct time.” He added this comment:
    “It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
    I've been able to use the installer even without setting back the date.  I just clicked on the Continue button and it would work as expected.  For some it would not continue unless the date was set back.”
    The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
    Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

  • Release strategy for PO and Contract

    Hi,
    I maintain characteritic for PO
    Plant
    Doc Type
    Net Order Value
    Purchasing Group
    I maintain characteristic  for contract
    Company code
    Target Value
    Doc Type
    Purchasing group
    My class consist of
    Plant
    Doc Type
    Net Order Value
    Purchasing Group
    Company code
    Target value
    Q1: Do i need to maintain ALL characteristic value when i define my release strategy for PO or Contract as some characteristic only apply to PO only or contract only?
    Q2:  What option do i have if i need to maintain all characteristic value ? leave it blank ? empty
    Currently my PO release is working fine but when i try to maintain the contract release inside the class . my PO release is not triggering . I maintained diffrent release group for both PO and Contract .
    Thank for your advice

    First of all
    For purchasing like PO,pr,contract you can able to get in ekko table.No need to maintain separate release unless if it your business requirement.Take Document type as one of the characteristics it will distinguish whether it is PO or contract.
    You have to maintain all the characteristic value then only it will trigered release.
    Check the release indicator as well.
    Hope it will help.

  • Oracle data guard configuration for primary and standby db_name

    I am working on configuring an active data guard for one primary DB and one standby DB. I have a few questions:
    1. Can I use different db_name, db_unique_name and instance_name for primary and standby. For example: primary(db_name, db_unique_name and instance_name)=chicago. When I create standby DB with Rman backup and copy of pfile and control file from primary DB or use Grid control to create standby database. Oracle document or Grid control all keep standby db_name=chicago. Only make standby db_unique_name and instance_name=boston. Due to my application system condition, I want to make db_name=boston, not keep it as the same as primary=chicago. Is this valid configuration?
    2. In primary datafiles, application system generate datafile name like this: hr_chicago_01.dbf, fn_chicago_01.dbf. When I move datafiles to standby server, if I plan to use db_name=boston for standby DB, can I rename datafiles as
    hr_boston_01.dbf, fn_boston_01.dbf? In this way, datafile name match up with db_name. but I will create standby log group and members on primary and standby identically. If in future switching over, DB will not have problems.
    3. If I don't use primary DB backup. Instead, I copy all datafiles, redo_log files (no control files) to standby. Then "alter database backup controlfile to trace" from promary and also " create pfile='/xxx/initSTANDBY.ora' from primary. Then modify init.ora and controlfile. Then run control.sql to bring standby DB up. After that, configure redo log shipping and apply with data guard or SQL. Is this a acceptable way to create physical standby DB?
    Please advise your comments. Thanks in advance.

    I want to make db_name=boston, not keep it as the same as primary=chicago. Is this valid configuration?NO. DB_NAME must be the same ("chicago") at both sites. The Standby will be using a different DB_UNIQUE_NAME (e.g. "boston") and can be using a different Instance name / SID (e.g. "boston").
    can I rename datafiles Yes. The database file names can be changed.
    If I don't use primary DB backup. Instead, I copy all datafiles, redo_log files (no control files) to standbyWhat is the difference between the first sentence (a backup of the primary) and the second sentence (a copy of the primary) ? A Copy is a backup.
    Are you intending to differentiate between an RMAN Backup and a User-Managed (aka "scripted") backup ?
    Normally, for DataGuard, tou can use non-RMAN methods to copy the database but there's no value add in this.
    You'd still have to setup DataGuard ! (and I wonder if you'd have complications setting up Active DataGuard).
    But remember that you MUST create the Standby controlfile from the Primary and copy it over to your Standby -- particularly as you are planning to use DataGuard. This is not created by 'alter database backup controlfile to trace' , but by 'ALTER DATABASE CREATE STANDBY CONTROLFILE AS 'filename''
    Hemant K Chitale

  • R/3 configuration for 0SD_C01 and 2LIS_01_S001

    Hi guys,
    I have activated the infocube 0SD_C01, the complete flow. I created an infopackage for its infosource 2LIS_01_S001 and made an extraction. I got an error with a delta initialization and with a full upload I got that there is no that data in R/3. I’m currently using BI 7.0 and R/3 ECC.
    Is there something I need to do first in R/3, some kind of configuration for that datasource? They told me for the datasources 2LIS* used the transaction LBWE, but I don’t see 2LIS_01_S001 on that transaction.
    What do I need to do in R/3, in order to do extractions? Does someone have a manual for this Datasource/Infosource that would like to share? My email is [email protected]
    Thanks a lot
    Vic

    Hi,
    There is no LO datasource , you have to use LIS ..i.e, 2LIS_01_S001.
    I hope you know the steps to activate and load data into BW using LIS.
    Steps are as follows:
    1) Activating LIS update - goto OMO1 transaction code
    In the Updating – Info Structures(S001) - double-click the Updating radio button for Info structure S001.
    In the Parameters dialog box select Synchronous updating and choose ok.
    2) Goto OLI7 Transaction code - run the statistical update.
    3) Goto OLIX transaction code - setup version &( will be copied to actual version 000 for reporting
    4)Go back to OMO1 do deactive the LIS Update, check radio button to "No Update"
    5)Now goto LBW0 and choose option "Deactivate" Delta updating in LIS.
    6) In BW, Replicate DataSource, and run info Package with Initilization.
    7) Now again in R/3 we need to "Activate" Delta option from transaction code LBW0.
    8) and last step is to goto OMO1 to activate LIS Update to Synchronous updating and save.
    From now on you can run your Delta Infopackage
    Hareesh

  • UWL configuration for travel and leave

    Hi,
    Can anyone guide me on configuring leave and travel workflow and UWL connectors.
    We have deployed ESS/MSS .
    HR is configured in SAP ECC. Workflows are configured. I want to integrate to UWL.
    I am very new to UWL , so i need steps from start to end like connectors creation and RFC creations etc
    Thanking You,
    Jessi

    For a good overview I suggest you [Look at this|http://www.google.com.au/url?sa=t&source=web&cd=1&ved=0CBQQFjAA&url=https%3A%2F%2Fcw.sdn.sap.com%2Fcw%2Fservlet%2FJiveServlet%2Fdownload%2F113876-4-51769%2FTop10RecommendationsUWL.pdf&ei=lSe2TOeQIY-yvgOdkICTCQ&usg=AFQjCNGLZGdkgGlY6T3CZOtfiYTJEIvA-A&sig2=MbZCgJbLaXEkL4ihq-ZYBw]
    The help guide tells you how to do the basic configuration: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/39/a1bb5c4c0d4ab4a417e87ef35f1efa/frameset.htm
    BRgds,
    Simon

  • PC configuration for Premiere and AE (CC)

    Hallo everybody!
    I'm an Italian filmaker and I'm going to buy a new workstation but I don't know anything about hardware.
    I use Premiere for editing and AE for compositin and motion graphics.
    A couple of years ago a friend of mine suggested me this HW configuration:
    MSI Z87-G43 z87 4*DDr3 Gen 3.0 sk1150 Vga/Hdmi ATX
    Corsair 16GB Kit 2*8GB DDR-1600 CMZ16GX3M2A1600C10 XMS3-12800 serie Vengeance CAS10
    Inte Core i7 4770 3.40GHz Cache 6MB Haswell LGA1150 BOX
    Samsung MZ-7PD256BW SSD 256GB 840PRO SataIII 540/520MB/s 100K IOPS OE
    WesternDigital HDD 1TB Enterprose RE4 64Mb 7200 rpm SataII
    Zalman CNPS9900MAXBLUE Silenziosa Led Blue sk1155/1156/1366/775/AMD
    Corsair Carbide 300R Middletower No-Power ATX
    LG BH16NS40 Bluray Writer 10x 3D
    Digitus 3.5" Card reader USB 2.0 port
    Logitech keyboard K120 Business
    Corsair 750 CX 750watt EPS Pci-E PFC active 80+ Bronze
    MSI NVIDIA GeForce GTX770 OC Gaming TF IV 2GB 256bit Dvi/Hdmi/DP PCI-E 3.0
    Budget: almost 2000€
    Can anyone help me finding a new configuration with the same budget but with new-recent hw components?

    Double the RAM to 32 GB at a minimum.
    Use a full size case, not a mid-size.  You'll get better air circulation and have room for expansion.
    Add a couple more hard drives.
    Get a 850w gold power supply.

  • System configuration for ITS and for BSP

    Hi,
    I´m looking for the parameters needed in a system to connect to an ITS and also to BSP.
    I have created one system to be able to connect to ITS and another one to be able con connect to BSP, both of type SAP Load Balancing system.
    The system I created to connect to ITS has the following configuration I entered:
    Connector:
    SAP Client = 350
    Internet Transaction Server (ITS)
    ITS Description = myDescription
    ITS Host Name = myhostname:port
    ITS Path = /sap/bc/gui/sap/its/webgui
    ITS Protocol = http
    Thats it that´s the only configuration I´ve made.
    For the BSP system I entered:
    Connector:
    SAP Client = 800
    Web Application Server (Web AS):
    Web AS Description = myDescription
    Web AS Host Name = myhostname:port
    Web AS Path = /sap/bc/bsp/sap
    Web AS Protocol = http
    My question is this, is this configutation enough?,
    It is working fine with this configuration but I´ve seen some other information where they fill more parameters in the  connector section, would this extra parameters in the connector section help in any way or they will just simply be ignored?, We will be using Web Dispatcher for both.
    does somebody knows the answer? Is there some documentation on this?
    Thanx in Advanced!!
    Kind Regards,
    Gerardo J

    The connector properties are only required if you are planning on utilizing the SAP connector to connect to your backend system.
    What you have configured so far should suffice for ITS and BSP applications. I hope you have configured the system aliases already.
    Have a look at the following links for some additional inputs:
    http://wiki.sdn.sap.com/wiki/display/EP/MinimumSettingsforaSystem
    http://wiki.sdn.sap.com/wiki/display/EP/HowtoCreateSystemObjectinthePortalforConnectingtoSAPbackend+System
    - Shanti

  • FI 6248 Pre Licenced ports(1-12) configuration for Ethernet and FC

    Hello UCS Gurus,
    I am setting up a new UCS lab with 1 5108 Chassis,pair of FI 6248 and FEX2104.My query about the FI 6248 is that
    1) I have 12 pre-licenced Unified ports on my FI 6248 and I need to configure 1-10 for Ethernet and 11th/12th for FC port.,,,,Is it a valid configuration?
    2) If yes tomorrow if I buy the licence for the remaining ports 13-32. Can i continue using them as Ethernet and FC ports in alternate.I know
    Ethernet ports/FC ports must be grouped together in a block and they should end with even numbered port.
    Looking for your response on this....

    Hello Padma,
    I am stucked at a point of configuration on my lab and need your valuable advice.
    I have 8 SFP-H10GB-CU3M and 4 Nos SFP-10G-SR in my BOM.
    My confusion is I have to accomodate these SFPs only in my currect environment.I cant wait for the entire process of re-ordering new SFPs.
    So I will have to split SFPs between the pair of FIs and IOMs.
    So is it that I am short of SFPs? because my understanding says that I will be needing atleast 4 SFPs(Cu) on both FIs.
    So for FI1----> 2 SFPs(Cu) for Server ports,2 SFPs(Cu) for Uplink Ethernet ports
    for FI2------> 2 SFPs(Cu) for Server ports,2 SFPs(Cu) for Uplink Ethernet ports
    That means all my 8 SFP-H10GB-CU3M are exhausted.
    I dont have more SFPs to connect to my 2104 IO Modules.Please suggest me some workaround.I am in process of creating a lab so performance and bandwidth is not an issue for me.
    Regards
    Deepak

  • Encoding configuration for signed and encrypted emails

    I have a 8820 device (no BES server)  - I have certificates downloaded and trust on the device.  I can attach the requisite certificates to the message, but I do not have the option to select signing or encrypting encoding.  the menu does not give me this option.  I have the S/MIME package installed.  Any thoughts / pointers?

    The S/MIME support package is only supported with a BES. You might try Djigzo for BlackBerry. Djigzo for BlackBerry is an add-on to the Djigzo Email Encryption Gateway which can be used to send and receive S/MIME digitally signed and encrypted email from a BlackBerry smartphone. An installation of the Djigzo gateway is required.
    Djigzo for BlackBerry and the Djigzo gateway is open source and can be freely used.
    For more information see www.djigzo.com
    Djigzo open source email encryption

  • Pricing Procedure for RFQ and Contract

    Hi All,
    I have  configired new pricing procedure for external purchaseing documents import and export business.
    This pricing procedure is working fine for  PO but while manitan quatation and create contract Iam not able see configured pricing procedure.
    Please let me know how to resolve this issue.
    Thanks
    Nagaraj.K

    Hi
    Have you maintained a supplementary pricing procedure, if not please maintain a pricing procedure similar to RM0002, assign this to the Basic condition type PB00 or your customized one.
    Thanks & Regards
    Kishore

  • WF N-Steps for Purchase and Contracts.

    Hi Experts! I need you help! I'm trying to activate the WF for SRM in extend classic scenario.
    I need to activate the WF (WS14000148 and WS14000145) for contracts and PO's.  Is there a WF configuration guide to make this activations? or a document learning how i doing this?
    I was looking in help of SAP, but there isnt informations about configuration in WF N-steps.
    http://help.sap.com/saphelp_srm50/helpdata/en/58/c14e3c59bfe747e10000000a11402f/frameset.htm
    Thanks,
    Kristin

    Hi,
    There is basic workflow configuration steps in the standard configuration guide.
    [http://service.sap.com/ibc-srm|http://service.sap.com/ibc-srm]
    For N-step workflow, plese execute following 3 steps.
    1. Activate event for the WF template - Transaction SWB_PROCUREMENT
    2. Set start condition - Transaction SWB_PROCUREMENT
    3. Implement BBP_WFL_APPROV_BADI
    Regards,
    Masa

  • DNS Help: Configure for local and extenal services using same domain name?

    Hello all. I'm setting up a 10.5 server, have scoured these great forums and gotten close, but am still stuck. Any help would be greatly appreciated.
    My network setup is as follows: Internet (2xT1) > modem > router/firewall/NAT device > XServe > switches > rest of network, clients, etc. Pretty standard, I believe.
    I'd like to use this XServe on our local network/intranet/LAN only for OD, networked home directories, AFP, iCal, Time Machine, Print and Software Update.
    My website is hosted on an external server.
    My email is also hosted on a (different) external server.
    Domain is school.edu
    XServe name is xserve.school.edu
    XServe is 10.0.0.25
    I've gone through Apple's recommended DNS setup (supplemented by some great info found here on the forums....), and am able to connect to other Internet sites (with client's DNS server set as 10.0.0.25), but unable to connect to www.school.edu, or send/receive mail to/from mail.school.edu.
    In short, connecting to external domains that are NOT related to my school are fine, but I'm unable to connect to any domain that IS related to my school.
    If anyone out there can shoot me some notes on how to configure the DNS settings, zones, forwarding, etc. to accomplish this, I'd be VERY appreciative.
    Thanks, in advance, to anyone who can help me out.
    Cheers,
    Tim

    In short, connecting to external domains that are NOT related to my school are fine, but I'm unable to connect to any domain that IS related to my school.
    If your server thinks it's authoritative for 'school.edu' then you have to add records for every host in the school.edu zone.
    For example, if you want to be able to resolve 'www.school.edu' then you have to have a 'www' record. If you want to send/receive mail you have to add an MX record, and so on.
    It doesn't matter that you're not responsible for those servers, it's just that since this machine thinks it 'owns' school.edu it will only respond with records in its own zone and won't care about what any other name server says, even if that other name server is authoritative for the zone.
    FWIW, that's often why people running stub servers like this choose a separate subdomain (like 'dept.school.edu') so they can leave the main school.edu records on the main server and have full control over a subdomain.

  • Change Logs for RFQ and Contract

    Hi all
    Where in ME43 (display RFQ) and ME33K (display Contract) do I see the option for Header/Item changes?
    Thanks in advance!

    Hi,
    For both ME43 and ME33K, you can observe the changes, after entering into the overview screen at main menu:
    Header/ Item> statistics> Changes.
    Regards,
    Narayana.

Maybe you are looking for