PI dummy activities cannot have input/output nodes - CCR Error

Hello Experts,
While cifing process orders, queus are not moving from ECC to APO because of the following error " PI dummy activities cannot have input/output nodes". SAP reference in the error is "Message no. /SAPAPO/OM_ERROR2438". The confusing part is, suppose SKU 1000123 is being manufactured at factory B & C, there is same recipe no change in it but queues are moving for factory B and not for factory C. Please suggest how this issue can be resolved?

Hi
Please check the steps and OSS Notes mentioned in this thread
http://forums.sdn.sap.com/thread.jspa?threadID=1477003
Thanks,
Prasun

Similar Messages

SMQ2 entries - PI dummy activities cannot have input/output nodes

Hi
I've just completed an upgrade of APO from 30A to SCM5 SR2.
I'm trying to reconcile differencies between R/3 and SCM with the DELTAREPORT3 (/sapapo/ccr).
It keeps coming back with alot of entries for Planned Orders.
When I try and reconcile (send to APO) the APO inbound queue (SMQ2) fills up with loads of SYSFAIL entries.
Each entry has the same error "PI dummy activities cannot have input/output nodes".
Can anyone shed some light on why this could happen, and what this BASIS guy can do to resolve?
thanks,
Stephen

HI Stephen.
Would suggest that there is a problem with master data. Try and work with someone with APO/R3-PP knowledge and compare PP master data with APO PPM's or PDS's.
Pick a particular planned order that is failing and work through it methodically understanding what master data it was using when it was generated. Compare this data to the APO master data.
Very general, I know but quite often master data is at the bottom of these things, especially if you are using PP-PI.
Regards, Mark.

Input/Output to Disk Error

Αξιοτιμε κε/κα
Προσπαθω να συνδεθω στο λογαριασμο μου αλλα μολις περασω τον κωδικο μου βγαινει το εξης μυνημα: Σφαλμα εισοδου/εξοδου στο δισκο.καντε δεξι κλικ στο εικονιδιο skype στη γραμμη εργασιων των windows και επιλεξτε quit. μετα επανακινηστε το skype. αν συνεχισετε να βλεπετε το σφαλμα επικοινωνηστε με τη γραμμη εξυπηρετησης πελατων.
εκανα λοιπον οτι ελεγε το παραπανω μυνημα αλλα συνεχισε η ιδια κατασταση. αλλαξα λοιπον κωδικο αλλα και με τον νεο κωδικο συνεχιζει το προβλημα. τι πρεπει να κανω;

irekouge wrote:
Αξιοτιμε κε/κα
Προσπαθω να συνδεθω στο λογαριασμο μου αλλα μολις περασω τον κωδικο μου βγαινει το εξης μυνημα: Σφαλμα εισοδου/εξοδου στο δισκο.καντε δεξι κλικ στο εικονιδιο skype στη γραμμη εργασιων των windows και επιλεξτε quit. μετα επανακινηστε το skype. αν συνεχισετε να βλεπετε το σφαλμα επικοινωνηστε με τη γραμμη εξυπηρετησης πελατων.
εκανα λοιπον οτι ελεγε το παραπανω μυνημα αλλα συνεχισε η ιδια κατασταση. αλλαξα λοιπον κωδικο αλλα και με τον νεο κωδικο συνεχιζει το προβλημα. τι πρεπει να κανω;
try reset Skype settings
http://community.skype.com/t5/Windows/Skype-auto-logs-off/m-p/938210/highlight/true#M69026
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Restoring .dmg image from external to Mac HD in Disk Utility: "Unable to scan image (Input/output error)"

Hi guys,
So I've got a problem with restoring the image backup I did (using Disk Utility) of my 500GB HD on my MBP which was acting weird or maybe even crashed a few months ago. After creating the backup image and putting it on my external device, I installed Mavericks back to see if everything was alright (mainly the HD) and everything seems okay.
I did try restoring the backup image through disk utility before installing mavericks (thus erasing everything again on the HD) AND after. But nothing..
The whole process starts fine and then it starts scanning the image when after maybe a good 10-15min in I get a message that says that it was unable to scan the image. I tried verifying the disk(s), everything came out "OK". Also tried scanning it through Images > Scan image for Restore... with the same results.
While searching I've seen people getting messages like "Unable to scan filename.dmg (Invalid argument)" and "Unable to scan filename.dmg
(Internal error)" but none have (Input/output error)
The screen grab is below.
I also came across something about using terminal/commands but I'm not that savvy with it, especially considering that those there had issues with either mounting or trouble finding the image.
I've also tried moving the backup image to a different external device 2TB and also the desktop because I read it may have to do with the format of the externals or maybe free space. But THEN I would get a message saying
"The Finder can't complete the operation because some data in "Mac HD Backup.dmg" can't be read or written. Error code -36"
Fyi ALL my externals are HFS+/Journaled and the backup image format was compressed.
I REALLY don't know what to do next. Was it the wrong move to create a dmg image? Have I lost everything? Is there still a way out?
If anyone can help, THANKS!
2012 MacBook Pro, Mac OS X (10.9.3)

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

I can see the input but have no output - and more!

Howdy,
I am dead in the water and am not sure what to do next.
Here's my system and everything attached to it.
OSX 10.4.11 / 2 x 2.66 Intel / 8 gb ram Mac Pro 1,1
Apogee Ensemble - Firewire bus 1
Maestro 1.7
Daemon v1.4
Driver v2.2Ofc9
Firmware v1.9.24
FPGA v1.31
CPLD v1.6.1
Powercore X8 - Firewire bus 2 (separate card)
Software version 3.2.0.38
Hardware version 3.2.0.36
Firmware 3.0.0.3
Novation Remote SL 25- USB
Line 6 Tone Direct - USB
POD Farm / Gear Box
Everything was working fine until recently.
Now, I cannot monitor inputs when recording real instruments. I can see the input on the level meters in Ensemble and in Logic's Channel strip but can't get any output in Stereo or headphones. After I record, it will playback what was input but without being able to hear what I'm playing, it's kind of pointless.... as a sidenote, I can hear / monitor the input normally if I record MIDI or software instrument.
Also, I am getting the" Record drive/partition “Audio Files/Audio Recording” not found!" message which has already been reported as a bug although, for me, it's a new problem and seems to be related to the other problem.
The only changes I have made in my system recently was to add a couple of new PowerCore plugs - the CL1B compressor and the Transient Modulator - which were both working fine until this. They still work fine on already recorded tracks.
I have reinstalled Logic, reset hardware, unplugged / plugged everything back in / ran Combo install for 10.4.11 / upgraded to FWAudio 2.2.0, reinstalled Ensemble, updated software, etc.,
I am stuck. Any suggestions???
Thanks In Advance

You're welcome. But I am afraid this is over my head - maybe you should contact Chris Lawson from Apogee - he posts here when there are questions concerning their stuff. and this seems hardware related to me. Maybe repost your question and use the word Apogee in your topic title, that'll get his attention...

"XSL Error: Cannot use a DTMLiaison for a input DOM node"

This code:
Writer writer = new StringWriter();
XSLTProcessor processor = XSLTProcessorFactory.getProcessor();
// Note: event.getDocument() returns a
// org.apache.xerces.dom.DocumentImpl
// sourced from xlms.jar
processor.process(new XSLTInputSource(event.getDocument()),
new XSLTInputSource(new FileReader(GDS_XSLT_STYLESHEET)),
new XSLTResultTarget(writer));
Gives this stacktrace:
XSL Error: Cannot use a DTMLiaison for a input DOM node... pass a weblogic.apache.xalan.xpath.xdom.XercesLiaison
instead!
XSL Error: SAX Exception
weblogic.apache.xalan.xslt.XSLProcessorException:
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1756)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1648)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.getSourceTreeFromInput(XSLTEngineImpl.java:876)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.process(XSLTEngineImpl.java:600)
1. All XML/XSLT classes are being sourced from weblogic.jar or xmlx.jar
2. Both jar files come from the WLS installation (WLS6.0 + SP2)
3. There are no other XML class providers on my class path
4. This is a standalone application, not running within WLS; I'm using weblogic
jarfiles here purely so I use the same XML implementation both inside and outside
WLS. Is this a sensible approach?
Any help, anyone?

All works fine in WLS6.1, with this extra code:
System.setProperty("javax.xml.transform.TransformerFactory",
"weblogic.apache.xalan.processor.TransformerFactoryImpl");
(or you could use -D)
No longer concerned; we've moved off WLS6.0
"Simon Spruzen" <[email protected]> wrote:
>
Interestingly, expanding the code to (the very verbose):
Document sourceDocument = event.getDocument();
XSLTProcessor processor = XSLTProcessorFactory.getProcessor();
StringWriter source = new StringWriter();
XMLSerializer sourceSerializer = new XMLSerializer(source, new OutputFormat(sourceDocument));
sourceSerializer.asDOMSerializer();
sourceSerializer.serialize(sourceDocument.getDocumentElement());
StringWriter output = new StringWriter();
processor.process(new XSLTInputSource(source.toString()),
new XSLTInputSource(new FileReader(GDS_XSLT_STYLESHEET)),
new XSLTResultTarget(output));
(i.e. document -> string -> transform -> string)
works just fine, but this code is far too long-winded for me to be happy
with.
(Note that one of XSLTInputSource's ctors does take a Node, so I'm assuming
that
it should be perfectly safe to pass a Document here)
(Note also, that for various reasons at the moment, using JAXP's transformer
factory
is difficult for us)
"Simon Spruzen" <[email protected]> wrote:
This code:
Writer writer = new StringWriter();
XSLTProcessor processor = XSLTProcessorFactory.getProcessor();
// Note: event.getDocument() returns a
// org.apache.xerces.dom.DocumentImpl
// sourced from xlms.jar
processor.process(new XSLTInputSource(event.getDocument()),
new XSLTInputSource(new FileReader(GDS_XSLT_STYLESHEET)),
new XSLTResultTarget(writer));
Gives this stacktrace:
XSL Error: Cannot use a DTMLiaison for a input DOM node... pass a weblogic.apache.xalan.xpath.xdom.XercesLiaison
instead!
XSL Error: SAX Exception
weblogic.apache.xalan.xslt.XSLProcessorException:
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1756)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1648)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.getSourceTreeFromInput(XSLTEngineImpl.java:876)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.process(XSLTEngineImpl.java:600)
1. All XML/XSLT classes are being sourced from weblogic.jar or xmlx.jar
2. Both jar files come from the WLS installation (WLS6.0 + SP2)
3. There are no other XML class providers on my class path
4. This is a standalone application, not running within WLS; I'm using
weblogic
jarfiles here purely so I use the same XML implementation both inside
and outside
WLS. Is this a sensible approach?
Any help, anyone?

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
.Create a data recovery/undelete external boot drive
Are you sure you have hard drive failure, or that OS X isn't merely not booting?
Because if the drive is working physically, then there is a host of fixes
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

I would like to connect speakers and microphone to my Mac but I only have 1 input/output

Hello!
My MacBook have only 1 miniJack input/output...
Is there a way or some hardware/software to connect my Mac to the speakers to amplify sound and, in the same time, the mixer to Mac to record?
Many thanks
Cristina

If the track you want isn't available in the Australian iTunes Store, then you will have to look for another source from which to purchase the music; another download store, import CDs, etc. Otherwise, contact the artist and/or the applicable record company and urge them to release the music in the Australian iTunes Store.
Regards.

Binding input and Output node elements

Hi all,
Binding Input and Output nodes of a model node.
Most of the time, we create a object of the input model node and then,
bind that object with wdContext.
Do we need to bind output node objects too in RFC Models?
Regards
Neha Singh

Hi Neha,
There is no need to create/bind the model node. you can execute a bapi using classes.
To execute a bapi, you should do the following things.
1. Import the RFC and create the model.
2. Create an object of the input class of the bapi
e.g. :
Zbapi_Test_Input commision_Input = new Zbapi_Testn_Input();
3. Set the input
commision_Input.setSpart(division);
4. execute the bapi
commision_Input.execute();
5. Disconnect the model
commision_Input.modelInstance().disconnectIfAlive();
6. Get the output. Create an object for output class
Zbapi_Test_Output output = commision_Input.getOutput();
String commission = output.getCommision();
Hope this helps you.

The xquery cannot have an unbound current node

Hi,
am getting this error
•[RouteNode1, Routing Table action] XQuery expression validation failed: The xquery cannot have an unbound current node.

unbound current node error comes when you use a variable in xquery expression without the $ symbol. Check for the symbol in various variables in xquery expression.
Cheers,
Durga

Hello! I am having trouble deleting any emails on my Mac OS X. I keep getting this error message "this operation couldn't be completed. Input/Output err." Any suggestions? I have rebooted.

Hello,
I have a Mac OS X. I just had some memory installed and had to update my Mail and had a ton of old mail still there. Since then, my mail has crawled so slow and I have tried to delete my old emails and I keep getting this error message "the operation couldn't be completed. Input/Output error". Any suggestions?
Thanks!

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Is there any String variable or something what have input and output data?

Is there any String variable or something what have input and output data?
Solved!
Go to Solution.

elefank wrote:
I have a "A"String and i want to merge this "A"String an other "B"String and I want to get it back to the "A" String
I would store the A String in a shift register and then you can use Concatinate Strings whenever you want to add the additional characters to it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

BPEL Newbie -- Cannot bind input

Have been given a wsdl to an internal web service, This service can be accessed by soapUI and XMLSpy default soap generators without any problem
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:par="http://localhost/XX/XX">
<soapenv:Header/>
<soapenv:Body>
<par:SeriesTitle>TEST</par:SeriesTitle>
<par:SeriesId>1/200-01</par:SeriesId>
<par:ProgrammeIdRef>1/2000</par:ProgrammeIdRef>
<par:SeriesStatus>PROD</par:SeriesStatus>
<par:ProductionAreaIdRef1>DRAMA</par:ProductionAreaIdRef1>
</soapenv:Body>
</soapenv:Envelope>
but Oracle BPEL fails with a remote fault thrown -- 'Cannot bind input'
The only strange thing, possibly linked - is because there are no partner link details in the original wsdl Oracle BPEL creates its own

Hi,
I suggest you to create a value node exactly like Output_Remarks model node in the controller context and populate all the data from Ouput_Remarks node to this value node. You can write for loop or you can use WDCopyService.copyElements() method to copy the elements from model node to value node.
Create one more additional boolean attribute as "isEnteredByUser" in the same value node.
By default this boolean attribute value for all the elements will be false.
Every time when user updates the remarks for a particular entry then go and update the remarks field for that particular entry in the value node. And change "isEnteredByUser" boolean attribute to true.
And every time check whether remarks exist or not in the value node.
Because of this "isEnteredByUser" attribute , you can easily identify the records which are modified at front end while updaing in database.
I dont think it is better to update the Output model node with user input.
Regards,
Charan

External Hard Drive Input/Output error

I recently started having problems with an external hard drive setup that I did not have problems with prior to upgrading to 10.5.5 and trying to setup the drive to be compatible with Time Machine.
The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
The first problem I ran into since upgrading and reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
Thanks,
Paul Rugg

Thanks for the suggestion.
Do you think that would work better than Drive Genius? I bought Drive Genius 2 and it does not even see the drives when they are plugged in unlike Disc Utility which can see the drives but cannot mount either one.
Maybe this following post I made to a different questions may help. The data on the drive is other buying another program for if it will work. I think my next step may be to go over to a friends place and try to mount the drives on his computer and transfer stuff off if they connect.
text below posted to other question relating to external hard drive problem.
I have recently had the same mounting issue with my new external hard drive. I just purchased a new 750Gb Western Digital Sata drive and got everything transfered over to it. Immediately, I got an error saying that the drive had been ejected incorrectly even though it was still plugged in. I was a little curious. I restarted the computer (hard drive still plugged in via USB 2.0) and the drive showed up just fine. I plugged another 250Gb drive into the same case (2 bays) and the 250GB drive showed up just fine.
Well, I then noticed there was an OS upgrade available when I ran Software update so i ran it and when I rebooted the drives were gone. I can see the drives in Disc Utility, but they will not mount. Drive Genius cannot see either disc. Disc Utility says I need to repair the drives, but when I do it says they are fixed but they don not mount.
The problem really seems to be related to mounting USB external drives. I got ahold of 2 seperate external firewire hard drives and one shows up just fine while the other has the same problem (both work on other systems. I would try wiping the drives and reformatting but ALL MY stuff is on them and not everything has been backed up. Yuck! I have not tried connecting my hard drive to another Mac yet.
The drives being used are #1 Maxtor Maxline Plus II 250GB SATA/150 HDD 1.5b/s 7Y250m00654ra
and #2 Western Digital WD7500AACS WD Caviar GP Green Power drive.
I have another post similar to this and I have not received any feedback, but I have been doing my own searching and have found similar posts on the net.
Anybody have any clue what might be going on here? It really seems to be related to my upgrade.

Issue in invalidating the model output node

Hi All,
I have a problem in invalidating the model output node. Below is the description of my approach and problem statement.
REQUIREMENT: We have had the requirement to develop a custom WD java application in MSS which will fetch the appraisal data for each employee selection.
APPROACH: To acheive the same, I have developed the custom WD java application and have associated it with the Standard Employee Search application. I have established the eventing between both the applications, such that on each employee selection in Employee Search, I get the PERNR for the selected employee.
                     I have mapped a local valude node to the UI elements of my custom application. I am having TWO RFCs; one to Read data based on PERNR and the other to Update/Save to R/3.
                     I read the RFC based on PERNR and save it to local value node which is binded to the UI elements. If the end user is editing the read data, I am passing the entire local value node to the Save RFC import parameter on click of Save button in my application.
                     Every thing is working as expected. I am able to Read and Save the data and its also updating the backend. But, in the same session, if I go back to the previously selected employee for whom the updation has happened, i am not able to see the new data.
                     Only when I refresh the session, I see the new data on employee selection. When I try to invalidate the Read Output Model node, on Save button, I do not see anything happening. The Read Output Model node always holds the old value.
                     I have currently binded the Read model output node to a table in the view to see what it holds in runtime. And what I see is , its always having the old record for the same employee, in the same session even after invalidating the same on Save button.
I request you all to pleae try to understand the issue and let me know as how to get the new values in the same session.
Regards
DK

Hi,
When you are executing the read rfc ?? At the time of executing the read rfc try to bind the new object every time you execute and see what happens.
Like..
wdContext.node<READ_RFC_NODE>().bind(OBJECT of READ RFC);
then execute it.
Is there some kind of table which shows the employees and on selection you are showing the data? Can you give some more input on how you are reading the data?
Best Wishes
Idhaya R

PI dummy activities cannot have input/output nodes - CCR Error

Similar Messages

Maybe you are looking for