PI E-filing GB SWCV Issue

PI E-filing GB SWCV Issue
I am currently experiencing an issue with E-filing in PI.
We are getting various error messages from the message mappings...
e.g.Target message Message Type: HR_GB_EFI_DPSrequestToken_Response does not exist in software component version ID: 4b9f4c422e6011dab9e1f8170a114c15 Check whether software component version ID: 4b9f4c422e6011dab9e1f8170a114c15 is in the Enterprise Services Repository. Import this or a newer version if necessary.
We are on Support package 19 for E-filing and 65 for SAP HR 6.00.
Can anyone shed any light on what the problem might be? 
Also what is guid 4b9f4c422e6011dab9e1f8170a114c15 refering to because SAP HR 6.0's guid is 9dc41520ad7211d8bae0d61d0a114c15.
Any help would be appreciated.
Thanks

Raj Patel wrote:
>
> e.g.Target message Message Type: HR_GB_EFI_DPSrequestToken_Response does not exist in software component version ID: 4b9f4c422e6011dab9e1f8170a114c15 Check whether software component version ID: 4b9f4c422e6011dab9e1f8170a114c15 is in the Enterprise Services Repository. Import this or a newer version if necessary.
>
> Thanks
The GUIDs are uniquely defined for each version of the swc. So, you are using a wrong swcv in you repository, while the mappings are referring to another swcv.
As per the error above, the problem is with the HR SWCV that you are using as it is complaning that the target message is not available in the SWCV. If you keenly observe, the above GUIDs are different.
VJ

Similar Messages

  • SNMP issues after upgrading Guard

    We recently upgraded one of our Cisco Guards from 6.0(10) to the latest version (6.1(2)) and now the following OID's do not appear to work/exist any longer:
    rhNEAcceleratorCPUUtilization.1
    rhNEAcceleratorMemoryUtilization.1
    The ability to graph these are critical due to the following bug:
    CSCsc05116 - The Guard may stop functioning or start logging errors after reaching 100 percent anomaly detection engine memory utilization. Workaround: Use the show resources command in global mode to view the amount of anomaly detection engine memory currently being used by the Guard. Reducing the number of active zones may free up memory.
    I thought that maybe they changed the way it is queried but was unsuccessful with anything else I tried (using the latest MIB).
    I apologize if I have posted this in the wrong place.
    Any help is greatly appreciated.
    Thank you.

    There is a bug filed for this issue you have mentioned and the work around for this issue is that the Anomaly Detection memory should be freed by deactivating one or more zones, or alternatively by disabling several number of policies/services.
    You can delete a specific service relating to a policy template.
    To delete a service from a policy, enter the following at the policy template prompt:
    remove-service service-num

  • Disk Issues with UltraBay 2ndHD Sata Adapter

    I'm having a bit of a wierd issue and I don't really know where to turn to. When I upgraded to my T61 I bought a Sata Ultrabay Drive adapter into which I stuck the old 100gb sata disk out of my R60 (which met an untimely end). The disk itself works fine, I have tried it on several machines, and have swapped it into the main drive slot in my laptop.
    However, when connected through the ultra bay adapter things start behaving a little wierdly, the disk is often very slow to respond when browsing the filesystem and very regularly (several times a day) the disk disconnects and windows reports a 'delayed write failure', once this occurs the ultrabay adapter must be ejected and reinserted before the drive will be usable again.
    Now here's were it get's even more interesting. I just reinstalled windows today and have been using the drive without issues. I installled the IntelStorageMatrix drivers, rebooted and within 10 minutes the drive began playing up. Since then I have tried the disks both in AHCI and Compatability mode set in the BIOS neither seem to make much of a difference.
    Any thoughts on this problem, or what I could do try and remove the Intel Drivers to see if this resolves the issue? Also where and how do we officially approach the Lenovo technical team, there doesn't appear to be an overly useful way of filing/reporting and issue such as this.
    Cheers,
    Jonas

    I was also having weird problems with my ultrabay adapter and hard drive. Like couldn't hot swap hard drives, a few minutes after booting up some of the function keys would stop responding (like easy eject, wireless radio control, power management).
    After much troubleshooting, reinstalling clean and preload made no difference. I came across the thread about the adapter being incomplete and the potential need for a caddy to secure the hard drive. I didn't have a caddy, but put this foil type that originally was on the bottom of the wd 320 gb hard drive to protect the circuits on the bottom and installed into laptop.
    Ever since everything work perfect, hot swap, function keys.
    I think something was shorting out, and the foil on the hard drive prevents that. So I assume hard drive caddy would serve same purpose and also make the drive more secure in the adapter.

  • ACS 5.3 connected to AD

      So we have this problem that just started, I can replicate the issue as well, if a user makes a mistake on typing there password after 1 attempt ACS sends 3 to AD locking out the user.
      In a putty or secureCRT session after 1 password failed attempt, I am unable to retry with that same session. Any thought suggestions.
      The issue seems to be that after 1 bad password attempt, from the client side I am unable to get another try.
    Jeff                  

    HI Jeff,
    We have a bug filed for this issue and it is fixed in 5.3.patch 3
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtz03211
    Regards,
    ~JG
    Do rate helpful posts

  • No longer have service at home....I've lived here for 3 years and never had a problem until now.

    I have been having issues for the last couple of months now with getting service on my cell phone at my house. Meaning, my phone literally says, "NO SERVICE" where I've always had service bars. I can't even send or receive a text message at home. Never, have I experienced these issues before. I've lived in this house for 3 years and have always been able to talk on my cell phone and send and receive text messages, until now. At first I chalked the issues up to the storms we had been having. Assuming a Verizon tower had possibly been hit. After several more weeks passed with the issue being unresolved, I went into my Verizon store and explained the issues I have been having. The rep I was working with suggested that I back up my phone and do a system restart on my iphone to see if that would fix the problem. I followed his instructions and the issue was still unresolved. I then went back into my Verizon store and explained the issue to the same representative I worked with the first time. He said it sounded like it was more of a software issue than a Verizon issue. Since my contract was up and I was good to get a new phone I decided to upgrade to the iPhone 5c (therefore I lost my unlimited data which irks me). When I got home I was shocked to see that I was STILL having the same issues. No Service. Can't text. Can't call. At this point I'm ready to lose my mind. Why am I paying for a service that I am not getting? We left on our family vacation this same day, so when we FINALLY reached a point down the road where I could receive service, I called my Verizon store to express my UNDERSTANDABLE frustrations. They were extremely helpful and have been since day 1. I ended up talking to a different representative than the one who had been helping me. She asked me to explain my situation and the issues I have been having since she hadn't been helping me she wasn't aware of what was going on. Once I explained my situation to her, she asked me where I lived at. Once I told her where I lived she IMMEDIATELY knew what my issue was. She told me that Verizon QUIT paying to use the Nex-tec tower that is by my house. She told me I'm not the first person that lives in my area to come in to their store with these SAME ISSUES. She told me that I needed to contact Verizon and complain and that hopefully if all of us kept complaining, Verizon would resolve the issue. I am WRITING you a complaint because I cannot CALL you off of my cell phone unless I drive SEVERAL miles down the road to a point where I can get service. I live on a busy highway that intersects with another busy highway a few miles down the road in North Central Kansas. I also live 3 miles from a STATE PARK with a VERY BUSY LAKE that doesn't have ANY SERVICE. I have talked to several friends, family members, and neighbors in my area and surrounding towns that are having the same issue as me and were told the same thing. Lovewell State Park is very popular and MANY people spend their weekends there. We have always had service there, until now, as well. Verizon customers that attend Lovewell State Park and that live in the surrounding towns cannot even call 911 off of their cell phone if their is an accident because we have NO SERVICE ANYMORE. I've been with Verizon since they ought out Altell. I have never had any issues with Verizon until now. Please take care of your customers. I trust that you care that you took service AWAY from customers who having been paying you for your service for several years and that you will resolve the issue quickly. We want our service BACK. We want to get service that we PAY FOR. If you cannot resolve the issues that I (and so many others) are having, I will be forced to switch to a new provider. As of right now, Verizon is doing me no service. Please change that. We live in an area where there are many accidents due to the types of jobs and winter weather we have in this area. It is necessary that we are able to make phone calls. I know that I am not the first nor will I be the last in our area to complain about this issue. Please fix these issues. Again, this information came straight from our Verizon store. They are just as upset as we are about the situation. The store doesn't want to lose us as customers and we would feel bad doing that to them when they have been such great people to work with. If the issues are not resolved we will be left with no other choice.

        @farmwife25
    After reading your post, I can certainly understand your concerns with this situation.  I would love to assist you finding a resolution for your service issues in your home area.  First, I'll need to ask you a few questions to help me in resolving.
    In what zip code do you experience this problem?  You mentioned service problems at your home.  Do you get a signal when you're outside at this location?  Have you spoken with our Technical Support Team regarding this issue in the past?  And if so, was a resolution ticket filed for this issue on your behalf?  Please let me know so that I can further assist.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • Slow Performance in Non IE Browsers

    I'm struggling with slow performance with non IE browsers (I.e. Opera or Firefox), or connections through a proxy server to an applicaton I wrote. This is what I am using...
    JSF 1.2
    EJB 3.0
    Facelets
    RichFaces Taglib
    SJSAS 9.1
    Anyone have any suggestions where to direct my frusterations?

    There is enhancement filed about this issue that you are experiencing. Also, there are a new set of PL/SQL API documentation that is automatically generated and we are checking to see if those have the same issue.
    Thanks,
    Sue Vickers

  • How to change the cursor type when a TableView class was added to a Swing application?

    We can resize column width by dragging the column divider in the table header. This is a built-in feature of the TableView class.
    Normally, the cursor will become to east-resize (or west-resize) type with positioning the cursor just to the right of a column header.
    However, I found that the cursor is remaining the default type at the same position if I integrate JavaFX into Swing Application. That is adding the TableView to a Scene, and then adding this Scene to a JFXPanel, finally, adding this JFXPanel to the JFrame.
    The sample codes are listing below:
    public class Run extends JFrame {
        Run() {
            setSize(600, 450);
            setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            initComponents();
        private void initComponents() {
            final JFXPanel fxPanel = new JFXPanel();
            this.getContentPane().add(fxPanel);
            Platform.runLater(new Runnable() {
                @Override
                public void run() {
                    initFX(fxPanel);
        private void initFX(JFXPanel fxPanel) {
            Scene scene = null;
            try {
                scene = FXMLLoader.load(
                    new File("res/fxml_example.fxml").toURI().toURL()
            } catch (Exception ex) {
                ex.printStackTrace();
            fxPanel.setScene(scene);
        public static void main(String[] args) {
            SwingUtilities.invokeLater(new Runnable() {
                @Override
                public void run() {
                    new Run().setVisible(true);
    fxml_example.fxml:
    <?xml version="1.0" encoding="UTF-8"?>
    <?import javafx.scene.Scene?>
    <?import javafx.scene.control.TableView?>
    <?import javafx.scene.control.TableColumn?>
    <Scene xmlns:fx="http://javafx.com/fxml">
        <TableView fx:id="tableView"
                   editable="true">
            <columns>
                <TableColumn text="COL1">
                </TableColumn>
                <TableColumn text="COL2">
                </TableColumn>
                <TableColumn text="COL3">
                </TableColumn>
                <TableColumn text="COL4">
                </TableColumn>
                <TableColumn text="COL5">
                </TableColumn>
            </columns>
        </TableView>
    </Scene>
    So, are there anyone can advise how to fix these codes; make the cursor can change to east-resize (or west-resize) type when this TableView class was added to a Swing application?

    Thanks for the report. I've just filed a JIRA issue: https://javafx-jira.kenai.com/browse/RT-34009
    //Anton.

  • While opening a pdf file in new tab, the rest tab's mouse scroll not works until closing the pdf file tab

    I have noticed this problem in ff5 too. Suggest me is it a bug my machine or it came with it. If this issue is real i can provide more detail how often/ on what stages it happens.

    There's a Bug filed about that issue.

  • Read-only access to the console

    Anyone know how to set up a user to allow read-only access to the WLS console?
    simon.

    This is not possible with WLS6.1. There is an enhancement request filed
    for this issue.
    - Utpal
    "Simon Spruzen" <[email protected]> wrote in message
    news:3c751f2c$[email protected]..
    >
    Anyone know how to set up a user to allow read-only access to the WLSconsole?
    And does anyone know whether the console can be 'zoned'? e.g. only allowaccess
    to the security part of the tree.
    Thanks, WLS people,
    simon.

  • Many pages not displayed correctly in non-IE browsers

    Some pages, especially those part of the PDK, are not displayed in non-IE browsers. An example is:
    http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/sdk22pkg.htm
    Viewing the source shows a very badly formatted IMG SRC tag (alt="Oracle9iAS Portal Developer Kit"). Removing this tag fixes the pages.
    Could you please adjust these pages ASAP so they are again also viewable according to the Rehabilitation Act?

    There is enhancement filed about this issue that you are experiencing. Also, there are a new set of PL/SQL API documentation that is automatically generated and we are checking to see if those have the same issue.
    Thanks,
    Sue Vickers

  • Since upgrade Firefox opens in wrong monitor window.

    Since upgrading yesterday, Firefox ALWAYS opens on Monitor 1 instead of Monitor 2. I have DELETED all add-ons and plug-ins. I have minimized, maximized, moved from Monitor 1 to Monitor 2 without maximizing or minimizing, and Firefox ALWAYS opens in Monitor 2. I'm running Mac OSX Lion. There were no issues until the Firefox upgrade yesterday. GRRRRR!

    unfortunately this is a regression in firefox 12 on mac os x that has been reported here in the forums quite few times. there are already some bugs filed for the issue & hopefully it will be resolved in one of the upcoming releases (although judging from the bugs' stati there isn't much progress yet).
    https://bugzilla.mozilla.org/show_bug.cgi?id=264030
    https://bugzilla.mozilla.org/show_bug.cgi?id=752149
    (please don't post support questions in the bugs)

  • Can not use scroll mouse in html tab when open pdf file in new tab with middle button but will avaliable only after switch to pdf tab and switch back to html

    When I open a "pdf" file in new tab with middle mouse click. After few second my mouse will not able to scroll in page that I read. But it will be able to scroll only after I click to any opened pdf tab and click on pdf document and click back on previous tab to continue reading. It is not only happen on my laptop also on my desktop too. (winxp 4gb/8gb ram core2 duo 2.66)

    There's a Bug filed about that issue.

  • Exception thrown while processing pdf file with composite fonts using adobe pdf library (v 9.1 )

    Hi All,
    I have an issue with processing composite fonts with adobe pdf library (v 9.1 ).
    While processing a pdf file having composite fonts, the pdf library is throwing an exception.
    The api which throwed exception is "PDPageAcquirePDEContent()". In my code i am calling PDDocGetNumPages(), PDDocAcquirePage() before this api is called, but all those functions suceeded. In the HANDLER, using the ASGetErrorString(), i got this exception error as  "The encoding (CMap) specified by a font is missing."
    Now coming to the input file (which is also attached), this document have three different composite fonts ( details are given below )
    Font Name : TicketBold, Bold(Embedded)
    Font Type : Trueype (CID)
    Encoding : Identity-H
    Font Name : Times-Roman (Embedded)
    Font Type : Type 1 (CID)
    Encoding : Identity-H
    Font Name : TimesNewRomanPSMT (embedded)
    Font Type : TrueType(CID)
    Encoding: Identity-H
    If i convert all the composite fonts to outline using pitstop before processing, it works fine.
    So my question is that whether pdf library doesnt support composite fonts (which i dont think so ) or i need to do a special handling for these kinds of fonts in my application ( which i strongly belive ). If its the latter case, please let me know how to handle it in my application.
    thanks in advance
    best regards
    ~jafeel

    Hi Leonard,
    Thanks for your reply. May i ask you which sample of the PDF Library you used to test my scenario.
    One question i would like to put to you beofre going for filing a formal issue to Adobe will be does this issue has anything to do with the initialization of the pdf library?
    What i meant is that when we call the PDFLInit() we pass a PDFLDataRec structure which is initialized by various path to font folders, cmap folders and unicode folders. Whether if i miss any of these folders will it cause this issue???
    thanks again
    regards
    ~jafeel

  • ADAWS Webapp Directory Does Not Exist

    Hello,
    When I do the test (Security Settings) by the URL http://localhost/adaws/install/writeFiles.aspx I have the following error: "ADAWS Webapp Directory Does Not Exist."
    Someone knows what are happening?

    Tech support told me:<br><br>
    "We have bug #60365 filed on this issue. The version number in WriteFiles.asp.vb is hardcoded to '6.2' and It will look through pthome.xml for this version of ID-AD and not find it. As a result, it will throw the 'Directory Does Not Exist' error. "<br><br>
    Basically, just ignore the diagnostic error as the remainder of the app is unaffected by it.

  • Some users see test Provider page instaed of portlet

    Hello,
    I have installed a portlet , I have added it to a page, and I can see it correctly with several users, but there are some others that see the provider's test page instead. I think they have the same permissions, where can I look to solve this problem?

    Hi ,
    There are Bugs(Bug Nos:3882670,3962295) filed for similar issues, which have been resolved in AS 10.1.2.
    According to the Bugs filed , this behaviour is seen when
    1.The username is long and has special characters
    2.The username consists of multibyte characters.
    Could you please clarify if the usernames of the users which are seeing this issue are not as mentioned above, and would it be possible to tell the actual usernames which are facing this issue.
    Thanks
    Vineet

Maybe you are looking for